LOAD LIMITER
P SPRING machine control } DAVIDE vs GOLIA 2-3 This family of products is the result of the work of a team that has been carrying out for more than 20 years. We have been designing manufacturing selling installing electronic systems for industrial vehicles for more than 20 years. In a field where the manufacturers usually relay on the usual partners P we have started a project called DAVIDE vsgolia At SPRING machine control we are proud to be able to concentrate on an important goal even in such a difficult period of crisis. We are proud of our results, because we obtained them thanks to our own strength, ideas, capability, passion and above all thanks the faith that our clients put in our company. Our goal is not only to satisfy a technical request but also to offer a wide range of high performance products that can give profit from the management point of view. Your profit is an important part of our project. Please read carefully to better understand our Special thanks: Clients above all those who took the project to heart R&D Smc UTEC Smc Technicians Smc Suppliers Smc - above all those who overcame the obstacles Thanks of taking part to the project P DAVIDE vsgolia P DAVIDE vsgolia
ITS STRENGTH The philosophy of this system is the same we used for all our products, i.e. the possibility to satisfy all the technical features using modular systems without forgetting that it must be easy to use and to install. With a 20-year know-how in the design of industrial electronic systems, Spring machine control is the ideal partner that is able to offer complete systems and above all that is able to develop its own projects according to the market requirements is compliance with the requirement of UNI EN ISO 13849-1 and UNI EN ISO 13849-2 PL d PHILOSOPHY was born as area limiter for aerial platform It is a versatile system that means that it is able to satisfy the different requirements Electronic safety control SPRING machine control was the first company to introduce systems with the opportunity to upload the software upgrade using a simple USB key. This idea has changed the working habit; during the test and the service, the technicians are no more obliged to have a PC This characteristics is appreciated not only by the manufacturer but also by the dealer that is able to set the parameters of the system during the final installation. Software, hardware and sensors are manufactured with our trade mark.
D A V PROJECT I D E I A VS G O L scissor lift ELECTRONIC SAFETY CONTROL S " C O N TR ROCKER angular sensors PRESSURE SENSORS O L S CONTROL SPRING machine control ELECTRONIC SYSTEMS www.springmachinecontrol.com
Scissors lift ROCKER MIR redounded angular sensor PRESSURE SENSORS The system can manage the tilting of the chassis according to the axle X Y Z. O LAPA
LOAD LIMITER } Technical and commercial features is particularly indicated for SCISSORS LIFT. Power supply DC Input - Analogic (Pressure) - Analogic (Pressure) 1 2 10..30V +/- 10% 5Watt max Current 4..20mA (accuracy: 12bit) 16 digital input Interface of communication RS232 Output Digital 1 4 serial point-point output 12..24V/2A Diagnostic signal Buzzer Diagnostic signal Diagnostic signal Law 1 - Diagnostic - Prealarm/Alarm IP67-40 C.. +70 C UNI EN ISO 13849-1 UNI EN ISO 13849-2 PL d is a compact module of the BRICK series; it has a 32-bit (CPU) micro controller technology for the management of the electronic safety control of the scissors lift Duty percentage Its main duty is to stop the movements throughout the output has the same SICMA connection as BRIK system, very common in automotive field for its characteristics that guarantee the mechanical seal against the liquid infiltration. It also guarantees a rapid clutch. is very versatile. Through the RS232 it is possible to interface the Parametrization software of SPRING machine control, using any PC in order to make the configuration of the parameters or to make an investigation of the diagnostic parameters and of the service values (for ex. The working hours used for the maintenance). has the: "Logger Black Box" which is a sort of diary with all the events that take place during the machine movement (even without power supply), outside the safety conditions, all the information of the status of the machine, date, time value of the sensors and safety conditions. 6-7
TIEGHI INTERACTIVE WWW.TIEGHI.BIZ SPRING s.r.l. via Monte Grappa, 4 28040 Dormelletto (NO) - ITALY Tel. +39 0322 401111 r. a. FAX +39 0322 401140 info@springmachinecontrol.com P.IVA 02425870033 SPRING s.r.l. reserves the right to modify the contents of this file in any moment, without notice. BROCHURE VERSION -2.0_GB