1126 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 151/2018 Αρ. 5092, 8.6.2018 Αριθμός 151 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Ι)/2002 θαη ηνπ Άξζξνπ 6 ηνπ Σξνπνπνηεηηθνύ Νόκνπ 57(Ι)/2011 Με ην παξόλ γλσζηνπνηείηαη όηη βάζεη ησλ Άξζξσλ 5 ηνπ βαζηθνύ Νόκνπ 156(Ι) ηνπ 2002 θαη 6 ηνπ ηξνπνπνηεηηθνύ Νόκνπ 57(Ι)/2011 πνπ ξπζκίδνπλ ηηο δξαζηεξηόηεηεο ηεο Σππνπνίεζεο, Γηαπίζηεπζεο θαη Σερληθήο Πιεξνθόξεζεο, ν Κππξηαθόο Οξγαληζκόο Σππνπνίεζεο (CYS) δεκνζηεύεη σο Κππξηαθά πξόηππα ηα πην θάησ Δπξσπατθά πξόηππα: STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 Generalities. Terminology. Standardization. Documentation 12216:2018 ISO 9687:2015 /A1:2018 ISO 41011:2018 Shutters, external blinds, internal blinds - Terminology, glossary and definitions Dentistry - Graphical symbols for dental equipment (ISO 9687:2015/Amd 1:2018) 01.040.91 01.080.20 Facility management - Vocabulary (ISO 41011:2017) 01.040.03 S/S 12216:2002 S/S 15221-1:2006 03 Services. Company organization, management and quality. Administration. Transport. Sociology ISO 41001:2018 9100:2018 9101:2018 9120:2018 9110:2018 9136:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) Quality Management Systems - Requirements for Aviation, Space and Defence Organizations Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations Quality Management Systems - Requirements for Aviation, Space and Defence Distributors Quality Management Systems - Requirements for Aviation Maintenance Organizations Aerospace series - Root cause analysis and problem solving (9S Methodology) 03.080.10 03.100.70 03.100.70 03.100.70 03.100.70 03.120.10 S/S 9100:2009= W/D S/S 9101:2015= W/D S/S 9120:2010= W/D S/S 9110:2015= W/D 11 Health care technology ISO 7488:2018 Dentistry - Mixing machines for dental amalgam (ISO 7488:2018) 11.060.20 7488:1996
1127 ISO 10139-1:2018 ISO 28319:2018 ISO 5832-2:2018 ISO 20608:2018 ISO 6872:2015 /A1:2018 ISO 12870:2018 ISO 11979-7:2018 ISO 11979-10:2018 ISO 10993-11:2018 ISO 14607:2018 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018) 11.060.10 Dentistry - Laser welding and filler materials (ISO 28319:2018) 11.060.10 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) 11.040.40 Dentistry - Powder jet handpieces and powders (ISO 20608:2018) 11.060.20 Dentistry - Ceramic materials (ISO 6872:2015/Amd 1:2018) 11.060.10 Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO 11979-7:2018) Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO 11979-10:2018) Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2017) Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018) 11.040.70 11.040.70 11.040.70 11.100.20 11.040.40 ISO 10139-1:2005 and AC:2006 28319:2010 S/S ISO 5832-2:2012 12870:2014 S/S ISO 11979-9:2006 and A1:2014, ISO 11979-7:2014 S/S ISO 11979-10:2006 and A1:2014 S/S ISO 10993-11:2009 14607:2009 13 Environment. Health protection. Safety 14594:2018 14593-1:2018 ISO 9241-11:2018 1366-11:2018 689:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking Ergonomics of human-system interaction - Part 11: Usability: Definitions and concepts (ISO 9241-11:2018) Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values 13.340.30 13.340.30 13.180 13.220.50 13.040.30 S/S 14594:2005 and AC:2005 S/S 14593-1:2005 S/S ISO 9241-11:1998 S/S 689:1996
1128 ISO 18640-2:2018 17077:2018 ISO 11260:2018 ISO 14254:2018 Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018) 13.340.10 Determination of burning behaviour of dust layers 13.220.40 Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018) Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018) 13.080.10 13.080.10 11260:2011 14254:2011 21 Mechanical systems and components for general use 14399-10:2018 14399-9:2018 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies 21.060.01 21.060.01 EN 14399-10:2009 EN 14399-9:2009 23 Fluid systems and components for general use 13445-2:2014 /A2:2018 ISO 21225-1:2018 ISO 21225-2:2018 Unfired pressure vessels - Part 2: Materials 23.020.30 Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018) Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018) 23.040.20 23.040.20 25 Manufacturing engineering 1011-8:2018 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons 25.160.10 EN 1011-8:2004 15895:2011 +A1:2018 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools 25.140.99 S/S 15895:2011
1129 29 Electrical engineering ISO/IEC 80079-38:2016 /A1:2018 4731:2018 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems 29.260.20 29.140.99 35 Information technology 419221-5:2018 419030:2018 419040:2018 CYS CEN ISO/TS 19293:2018 CYS CEN ISO/TS 20443:2018 CYS CEN ISO/TS 20451:2018 Protection Profiles for TSP Cryptographic Modules - Part 5: Cryptographic Module for Trust Services Rationalized structure for electronic signature standardization - Best practices for SMEs Rationalized structure for electronic signature standardization - Guidelines for citizens Health Informatics - Requirements for a record of the dispense of a medicinal product (ISO/TS 19293:2018) Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017) Health informatics - Identification of medicinal products - Implementation guidelines for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017) 35.040.01 35.030 35.030 35.240.80 35.240.80 35.240.80 47 Shipbuilding and marine structures ISO 8385:2018 Ships and marine technology - Dredgers - Classification (ISO 8385:2018) 47.060 8385:1999 49 Aircraft and space vehicle engineering 2234:2018 4122:2018 Aerospace series - Cable, electrical, fire resistant - Technical specification Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 C 49.060 49.030.30 S/S 2234:2012 S/S 4122:2004
1130 4123:2018 4124:2018 2899:2018 4708-301:2018 Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature) / 600 C Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: 1 210 MPa (at ambient temperature) / 730 C Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 C to 105 C - Product Standard 49.030.30 49.030.30 49.025.40 49.060 S/S 4123:2004 S/S 4124:2004 53 Materials handling equipment 16842-1:2018 16842-2:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity 53.060 53.060 59 Textile and leather technology ISO 811:2018 ISO 3175-4:2018 ISO 15496:2018 ISO 20418-1:2018 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018) Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2018) Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2018) Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO 20418-1:2018) 59.080.30 59.080.01 59.080.01 59.060.01 S/S 20811:1992 S/S ISO 3175-4:2003 and AC:2012 15496:2004 and AC:2006 61 Clothing industry ISO 20863:2018 Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018) 61.060 20863:2004
1131 65 Agriculture ISO 4254-8:2018 ISO 5395-1:2013 /A1:2018 Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) Garden equipment - Safety requirements for combustion-enginepowered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017) 65.060.25 65.060.70 S/S 14017:2005 +A2:2009 67 Food technology 15662:2018 ISO 9233-1:2018 ISO 9233-2:2018 Foods of plant origin - Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partitioning and clean-up by dispersive SPE - Modular QuEChERS-method Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO 9233-1:2018) Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO 9233-2:2018) 67.050 67.100.30 67.100.30 S/S 15662:2008 S/S ISO 9233-1:2013 S/S ISO 9233-2:2013 77 Metallurgy 12861:2018 ISO 4829-1:2018 ISO 6892-2:2018 ISO 4490:2018 Copper and copper alloys - Scrap 77.150.30 Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018) Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018) 77.080.01 77.040.10 77.160 S/S 12861:1999 S/S 24829-1:1990 and AC:1991 S/S ISO 6892-2:2011 4490:2014 83 Rubber and plastic industries ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018) 83.080.01 S/S ISO 11357-3:2013
1132 17219:2018 Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films 83.140.10 91 Construction materials and building 81-71:2018 81-70:2018 81-28:2018 16961:2018 16954:2018 15129:2018 Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts 91.140.90 91.140.90 91.140.90 Declaration of uncertainties in test reports 91.120.20 Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external) 91.100.15 Anti-seismic devices 91.120.25 EN 81-71:2005 +A1:2006 S/S 81-70:2003 and A1:2004 EN 81-28:2003 S/S 15129:2009 93 Civil engineering 13880-10:2018 CYS CEN/TS 12697-50:2018 16951-1:2018 Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression Bituminous mixtures - Test methods - Part 50: Resistance to scuffing Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 1: Acoustic characteristics 93.080.20 93.080.20 93.100 S/S 13880-10:2003 CEN/TS 12697-50:2016
1133 97 Domestic and commercial equipment. Entertainment. Sports 13387-5:2018 13387-1:2018 Child care articles - General safety guidelines - Part 5: Product information Child care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment 97.190 97.190 CEN/TR 13387-5:2015 CEN/TR 13387-1:2015 ΔΙΟΡΘΩΕΙ Ε ΠΡΟΗΓΟΤΜΕΝΕ ΕΚΔΟΕΙ ISO 13918:2018 ISO 16371-2:2017 13491:2018 ISO 18541-6:2018 16991:2018 ISO 11298-2:2018 ISO 11296-4:2018 CYS CEN/TS 17148:2018 Title Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version 2018-05) Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05) Risk-based inspection framework Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018) Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with curedin-place pipes (ISO 11296-4:2018) Intelligent Transport Systems - esafety - ProForma ecall Agreement between TPSP and PARES Modifications ISO has published corrected English and French versions of ISO 13918:2017 (Corrected version 2018-05). Titles and Forewords have been updated accordingly. ISO has published corrected English version of ISO 16371-2:2017 (Corrected version 2018-05). In A.4.6.1.2, correct the cross reference in the last paragraph. ISO has published corrected English version of ISO 18541-6:2018 (Corrected version 2018-05). Titles and Forewords have been updated accordingly. In 9.3.2, the reference to "6.2" has been corrected to read "Clause 7". In the Bibliography, reference [60] "IEC 812:2011" has been corrected to read "ISO 812:2017". The title of ISO/TC 138 in the European foreword has been corrected to read "Plastics pipes, fittings and valves for the transport of fluids. The title of ISO/TC 138 in the European foreword has been corrected to read "Plastics pipes, fittings and valves for the transport of fluids. New Release by CEN ΣΡΟΠΟΠΟΙΗΕΙ / CORRIGENDA ISO 10426-1:2009/AC:2018 ISO 19085-1:2017/AC:2018 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO 10426-1:2009/Cor 2:2012) Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) ΑΛΛΕ ΕΚΔΟΕΙ CWA 17260:2018 Guidelines on evaluation systems and schemes for physical security products