Be on the safe side with this pipe
Innovative and tried and trusted in many applications A B C D General type approval: Z-38.4-253 Dimensions: DN 12 DN 100 Pressure range: 25 bar, PN 25 Temperatures: 10 C to +50 C Laying: below ground and above ground Applications: Transport of environmentally hazardous, flammable, toxic fluids and gases ters are recorded around the clock, automatically transmitted to the LOD server and analyzed there. Any irregularities which may be detected in the leak detection system can already be recognized in this way even before the annual maintenance check is due and can therefore be pinpointed more easily and fixed, thus reducing costs. When an alarm is given, all relevant stakeholders are informed by text message and/or email. 2 1 Safety through double-walled construction The surveillance space between the inner and outer pipes enables permanent leak monitoring using approved leak detection devices operating either on the positive pressure or vacuum principle. The use of these systems is compliant with the highest European safety standards. The system is constructed with safety in mind and will detect any leak above or below the fluid level within a double-walled protective system. Safety through permanent monitoring and remote diagnostic systems The leak detector online diagnosis (LOD) system enables safe and ongoing remote monitoring of a leak detection device. All operating parame- Universal connection fittings The use of is designed for the transport of very diverse media. The demands placed by these require connection fittings which are just as reliably tested and certified. With the GRAPA -modular system it is possible to offer a comprehensive range of different connections, all based on identical principles and workmanship. In the course of technical modernization and development, the following joining techniques for the connections have proved to be the best: graphite with cutting ring (non-welded) A graphite with soldered end B graphite with rubber seal (non-welded) C WIG welding/hard-soldering D 3 4 Construction 1 corrugated stainless steel inner pipe (1.4404/1.4571) 2 surveillance space 3 corrugated stainless steel outer pipe (1.4301) 4 polyethylene jacket 2
The pipe that protects the environment Transport of environmentally hazardous fluids The material resistance of our products is certified and includes, among others, the following media: petrol DIN EN 228 diesel fuel DIN EN 590 kerosine, Jet A-1 heating oil DIN 51603 alternative fuels; Ad Blue, biodiesel lubricating oils DIN 51501 ff various alcohols; methanol, isopropanol lyes ammoniac in solution and many other media on request. Laying in protected areas Interference with an existing ecosystem mostly involves high costs for preparation and also for the restoration of the original surface appearance of the site. enables environmentally hazardous media to be transported safely even in nature reserves and water protection areas. The piping, manufactured in endless lengths, can be laid direct off the drum through its whole length, simply and easily, so that no long construction times are needed. And there are no welded connections on the route and no construction and pressure tests during laying. Routing around underground obstacles In combination with our approved leak monitoring systems Class 1, which can be used without additional requirements in all plants subject to acceptance tests (LAU/HBV). Compliant with all water protection law regulations and the requirements of fire and explosion safety. Simple securing of using system technology 3
The pipe that bends and turns every which way Applications The outer protective jacket of the FLEXWELL Safety Pipe is made of UV-resistant polyethylene. There are no limits to your flexibility in laying it. Whether inside the building through the walls, in crawl space in sub-basements or exposed to the elements above ground. The pipe construction and the materials used allow to be operated safely in all areas in which it is necessary to transport environmentally hazardous fluids and gas References/Use cases Here are just a few examples: supply lines for fuelling ships through water fuel lines for fuelling aircraft, helicopters oil supply lines in power stations propane supply for propane fireplaces fill pipes for emergency power systems Product variants On request we can also manufacture special customized solutions in our works in Germany. FSR-S line Depending on the medium and the project data, a PE-HD/PEX pipe can be integrated into the. With this enhancement of the quality, it is possible also to transport media in a monitorable double-walled system for which even high quality stainless steel is not usable. FSR-WD line Thermal oil pipelines demand safe transport and heat insulation. The FSR-3-WD is a monitorable double-walled pipe system which is heat insulated by means of a PUR foam jacket. FSR-H line The FLEXWELL FSR-H is a product variant in which the inner carrier pipe is encased in a wire mesh. The wire mesh gives the inner pipe greater stability, enabling pressure stages up to in excess of 50 bar to be compensated. The excellent flexibility is not restricted. 4
Technical details Twelve advantages in a system Type FSR DN PN Weight Min. Max. ID/AD bending length radius deliverable kg/m cm m 13/ 25 DN 12 25 0.52 30 500 30/ 48 DN 25 25 1.40 50 1000 39/ 60 DN 32 25 2.00 60 1000 48/ 71 DN 40 25 2.90 60 1000 60/ 83 DN 50 25 3.80 70 1000 75/107 DN 65 25 6.20 90 500 98/134 DN 80 25 9.00 120 500 127/175 DN 100 25 18.10 150 250 Laying in endless lengths less downtime through shorter installation work no welding needed in the trench environmentally friendly Laying options below/above ground in a duct or protective pipe in buildings in water protection areas in areas threatened by earthquakes Connection technology WIG welding/hard-soldering, PN 25 GRAPA compression joint/hard-soldering, PN 10 GRAPA compression joint/screwed connection, PN 25, non-welded Flexible no elbow fittings needed under ground ex-works corrosion proofing along the entire length can be laid in areas prone to subsidence and on slopes without any special precautions being needed Transport as a coil on a drum as a single line Monitoring positive pressure vacuum LOD remote leak detector online diagnosis Integrated fittings stays monitorable even when the route is extended moulded fittings monitorable flanged connection fittings Fire protection R90 or R120 Minimal costs for drainage safe laying even in waterlogged ground and where there is a high ground water table no need to lower the ground water table can be used when crossing rivers and other bodies of water Minimal costs for excavation work narrower trenches and shorter routing less spoil reduced costs for restoring the surface appearance cost reductions for securing the site and for road and pedestrian bridges Just go around obstacles crossings underneath and over obstacles with no extra costs no additional unplanned work through re-routing existing lines Environmentally friendly laying can be exactly fitted to the local circumstances trees and bushes can be given a wide berth the route can be adapted to the topography on site 5
Pipe systems for the future District heating Industry Petrol stations System packages 03 / 15 / xxxx ex. / 1016612 / pictures by Key Your partner for pipe systems We are the people you should talk to when you need to find efficient solutions for transporting liquid materials. With our project engineers, development department, in-house production unit, and our professional team of fitters, we have the know-how and the resources to look after your projects competently and reliably in the sectors of heating systems, petrol station construction, industrial plant construction, and system packages. Customer-specific solutions Brugg is the full service provider in the field of single-wall, double-wall and insulated pipe systems. This know-how allows us to manufacture project-specific customised items. Give us a call! Our engineers would be pleased to advise you and find a made-to-measure solution. BRUGG Rohrsysteme GmbH Adolf-Oesterheld-Straße 31 D-31515 Wunstorf phone +49 (0)5031 170-0 fax +49 (0)5031 170-170 info.brg@brugg.com www.brugg.de International network Our global partnership network can be reached on site at any time. More than 34 partners in 20 different countries will look after you wherever you are. Brugg Rohrsystem AG Industriestrasse 39 CH-5314 Kleindöttingen phone +41 (0)56 268 78 78 fax +41 (0)56 268 78 79 pipesystems@brugg.com www.pipesystems.com A company of the BRUGG Group