CATALOGUE 2018/19: SINKS +61 7 5478 9977 sales@smartlinemachinery.com www.smartlinemachinery.com PO Box 532, Buderim, Qld, 4456 55 Cordwell Rd, Yandina, Qld, 4561
2 Electric Height Adjustable Washing Station Improves Productivity: Reduces Risk of Injury Tapered benchtop with wetdeck perimeter Optional range of SmartSink tapware Tapered splashback Circular or rectangular bowls available Optional under sink tray racking One or two, rectangular or circular sink options Easy-to-use electric height adjustment Optional chemical bottle rack Adjustable bolt down feet FEATURES: Utilises premium 304 grade stainless steel for legs, bowls, screws etc. Splashback 300mm high. Bench surface available in 1350mm, 1750mm, 2200mm and 2600mm long, and/or 600mm and 700mm wide. Sink bench height range 850mm to 1080mm. Available bowl depths of 250mm & 175mm or customer specifications. Includes sink bowl etching of water volume in 5 litre increments. OPTIONAL ACCESSORIES: Rectangular, circular, single and/or double sink options. Sink Inserts. Splashback Shelf. Under Sink Tray Racking for storage of Autoplas trays. Full-Length Under Sink Shelf. Under Sink Chemical Bottle Rack. Range of SmartSink tapware to cater for all requirements.
3 SMARTLINE OFFERS A COMPLETE, CUSTOMISABLE WASHING STATION SOLUTION FOR YOUR DEPARTMENT REQUIREMENTS s sinks are manufactured in Australian and constructed out of 304 grade stainless steel. Sink bowls are available in double or single, rectangualr or circular profiles. Includes telescopic waste plumbing kit and is supplied ready to be installed by a registered plumber. SmartSinks are to be bolted to the floor. SmartSinks include easy-to-use electric height adjustability from 800 to 1200mm off the ground. User controls positioned under the sink top for easy access. Tapware can be located where you like. There is room on the splash back, behind and between the bowls. Tapware can be supplied with a SmartSink or separately for retrofitting existing sinks. Tapware must be fitted by client. SmartSinks include easy-to-use Electric Height Adjustment to suit the user s individual needs Through electric height adjustability, the SmartSink range promotes a safe and comfortable workplace for all staff, maximising efficiency and productivity. Buttons for electric height adjustment within easy reach underneath the bench. Small height adjustments can alter the user s posture, reducing the risk of injury and improving productivity.
4 SMARTSINK OPTIONAL ACCESSORIES BOWL OPTIONS Circular bowls available: 550mm diameter 175mm deep Rectangular bowls available: 175mm deep 250mm deep Rectangular Bowl length: mm Rectangular Bowl width: mm Flat splashback shelf (high) YES NO 50cm 80cm Splashback tray (lower) YES NO 50cm 80cm Full-length under sink shelf YES NO Under sink tray racking YES NO Tapware - Single Spout with Double Lever Action & Pre-Rinse Mixer YES QUANTITY Jet pistols YES QUANTITY NO NO Reverse Osmosis (RO) taps YES NO (Add details in Notes ) CONFIGURATION OPTIONS Centre Benchtop depth 600mm 700mm Corner under-bench chemical rack YES NO Single Bowl - Centre Position BENCH SIZE & BOWL SHAPE 1350mm bench, Single Bowl Circular Rectangular 1750mm bench, Single Bowl Circular Rectangular 1750mm bench, Double Bowl Circular Rectangular 1950mm bench, Single Bowl Circular Rectangular 1950mm bench, Double Bowl Circular Rectangular 2200mm bench, Single Bowl Circular Rectangular 2200mm bench Double Bowl Circular Rectangular 2600mm bench, Single Bowl Circular Rectangular 2600mm bench, Double Bowl Circular Rectangular Customised Bench Size Left Right Double Bowl - Centre Position Single Bowl - Left Position Double Bowl - Left Position Single Bowl - Right Position Double Bowl - Right Position
5 SmartSink Single Circular Bowl Electric Height Adjustable Sink - Single Circular Bowl 1350mmL - (11.SS-135-SC) 1750mmL - (11.SS-175-SC) 1950mmL - (11.SS-195-SC) 2200mmL - (11.SS-220-SC) 2600mmL - (11.SS-260-SC) SMARTSINK 304 stainless steel washing station. Single 550mm x 175mm deep circular bowl. Custom sizes also available. Customer can specify bowl position on bench: Left, right or centre. Electronic height adjustable with bench mounted control. 3.2m power cord. Earthed. Bench height range from 850mm to 1080mm. 300mm x 55mm splashback. Bench width 700mmD. Tapered bench surface with wet-deck perimeter. Includes sink bowl etching of water volume in 5L increments. Includes waste plumbing kit configured for height adjustment range. Installation not included. Installation required by registered plumber. Bowl must have individual waste drain through to floor. 8-week lead time from receipt of purchase order & signed-off sink drawings. SmartSink Single Rectangular Bowl Electric Height Adjustable Sink - Single Rectangular Bowl 1350mmL - (11.SS-135-SR) 1750mmL - (11.SS-175-SR) 1950mmL - (11.SS-195-SR) 2200mmL - (11.SS-220-SR) 2600mmL - (11.SS-260-SR) 304 stainless steel washing station with single rectangular bowl. Custom sizes also available. Customer can specify bowl position on bench: Left, right or centre. Customer can specify: Bench width 600/700mm; Bowl length & width; Bowl depth - 175/250mm. Electronic height adjustable with bench mounted control. 3.2m power cord. Earthed. Bench height range from 850mm to 1080mm. Splashback: 300mm x 55mm. Tapered bench surface with wet-deck perimeter. Includes sink bowl etching of water volume in 5L increments. Includes waste plumbing kit configured for height adjustment range. Installation not included. Installation required by registered plumber. Bowl must have individual waste drain through to floor. 8-week lead time from receipt of purchase order & signed-off sink drawings.
6 SmartSink Double Circular Bowl Electric Height Adjustable Sink - Double Circular Bowl 1750mmL - (11.SS-175-DC) 1950mmL - (11.SS-195-DC) 2200mmL - (11.SS-220-DC) 2600mmL - (11.SS-260-DC) 304 stainless steel washing station. 2 x 550mm x 175mm deep circular bowls. Custom sizes also available. Customer can specify bowl position on bench: Left, Right or Centre. Customer can specify bench width between bowls (minimum 100mm.) Electronic height adjustable with bench mounted control. 3.2m power cord. Earthed. Bench height range from 850mm to 1080mm. 300mm x 55mm splashback. Bench width 700mmD. Tapered bench surface with wet-deck perimeter. Includes sink bowl etching of water volume in 5L increments. Includes waste plumbing kit configured for height adjustment range. Installation not included - Installation required by registered plumber. Bowl must have individual waste drain through to floor. 8-week lead time from receipt of purchase order & signed-off sink drawings. Image indicative only. Tapware NOT included. SmartSink Double Rectangular Bowl Electric Height Adjustable Sink - Double Rectangular Bowl 1750mmL - (11.SS-175-DR-1D) 1950mmL - (11.SS-195-DR-1D) 2200mmL - (11.SS-220-DR-1D) 2600mmL - (11.SS-260-DR-1D) 304 stainless steel washing station with double rectangular bowl. Custom sizes also available. Customer can specify bowl position on bench: Left, Right or Centre. Customer can specify: Bench width 600/700mm; Bowl length & width; Bowl depth - 175/250mm. (Minimum 50mm between bowls.) Electronic Height Adjustable with Bench Mounted Control. 3.2m power cord. Earthed. Bench Height Range from 850mm to 1080mm. Splashback: 300mm x 55mm. Tapered Bench Surface with Wet-Deck Perimeter. Includes sink bowl etching of water volume in 5L increments. Includes waste plumbing kit configured for height adjustment range. Installation not included - Installation required by Registered Plumber. Bowl must have individual waste drain through to floor. 8-week lead time from receipt of purchase order & signed-off sink drawings. Image indicative only. Tapware NOT included.
7 Under-Sink Shelf - 450mmD Single stainless steel shelf mounted underneath sink ACCESSORIES 250mmW x 450mmD - (11.SS-USTS-2545) 300mmW x 450mmD - (11.SS-USTS-3045) 400mmW x 450mmD - (11.SS-USTS-4045) 500mmW x 450mmD - (11.SS-USTS-5045) Single shelf storage space mounted underneath sinktop for clutter free and easily accessed storage. Shelf height from ground moves in conjunction with the SmartSink bench height. Side and rear rails to prevent items from falling off the shelf. Stainless steel construction. Under-Sink Tray - 600mmD Stainless steel under-sink tray for SmartSink 600mm deep 1350mmW - (11.SS-UT13560) 1750mmW - (11.SS-UT17560) 1950mmW - (11.SS-UT19560) 2200mmW - (11.SS-UT22060) 2600mmW - (11.SS-UT26060) Stainless steel tray with sides and rear folded upwards; front folded downwards. Attaches to SmartSink base frame. If supplied together with new sink, required mounting holes will be drilled. If ordered for retro-fit, mounting holes will need to be drilled & tapped - not included. Includes mounting fasteners. Under-Sink Tray - 700mmD Stainless steel under-sink tray for SmartSink 700mm deep 1350mmW - (11.SS-UT13570) 1750mmW - (11.SS-UT17570) 1950mmW - (11.SS-UT19570) 2200mmW - (11.SS-UT22070) 2600mmW - (11.SS-UT26070) Stainless steel tray with sides and rear folded upwards; front folded downwards. Attaches to SmartSink base frame. If supplied together with new sink, required mounting holes will be drilled. If ordered for retro-fit, mounting holes will need to be drilled & tapped - not included. Includes mounting fasteners.
8 SmartSink Splashback Shelf (high) 200mmD x 500mmL - (11.SBS2050) 200mmD x 800mmL - (11.SBS2080) Hooks over top edge of SmartSink Splashback for high position. Easy to fit, move or remove. SmartSink Splashback Tray (lower) 200mmD x 500mmL - (11.SBT2050) 200mmD x 800mmL - (11.SBT2080) Stainless steel utility tray with integral hook brackets. Hooks over top edge of SmartSink Splashback for lower position. Tray comes with 2cm sides. SmartSink Basin Insert - Medium (11.SS-BI-M) Stainless steel insert for reducing bowl depth Reduce distance required to reach into sink, minimising back strain from repetitive work processes. Existing bowl dimensions must be specified upon purchase - bowl length, width and required depth of insert. Includes 40mm stainless steel waste drain with plug and 100x20mm overflow hole on each side of sink insert (also used to lift the sink insert out of the bowl.) Additional costs apply for etched water volume markers. Chemical Bottle Shelf for Sink (11.SS-CHEMSHLF) 550mmD x 250mmW 25x25mm stainless steel shelf welded to base of sink frame (not height adjustable.) Total shelf area 550x250mm. Can be added to the left side or right side of the sink frame. Welded at manufacture. Not an option after manufacture. Splashback Clamp Mount (11.SS-SBCM) Stainless steel mounting block to allow fitment of accessories such as monitor mount or magnifying light, which use a clamp device, to the splashback of a SmartSink. Requires drilling of two mounting holes in the splashback & fasteners (supplied) fitted from rear. Supply only.
Stainless Steel Autoplas Tray Rack Suits Autoplas trays - (51.TRYRCK-1X5) Suits Din Trays - (51.TRDIN-1X5) I column rack for storing five trays. If supplied together with new sink, required mounting holes will be drilled. Includes mounting fasteners. 9 Lever Mixing Set (11.TAP-CL10010) TAPWARE Splashback mounted mixing set with 165mm curved swivel spout & 100mm lever handles. Fits to SmartSink Splashback (sink unit not included.) Price includes related hardware & braided connection hoses. Nominated sink unit will have mounting holes pre-drilled if sink & tapware are ordered together. Supply only - Kit MUST be fitted by a licensed plumber. 5 Star 5.5lpm. 50kpa to 500kpa at up to 85 degrees celsius. Lever Sink Set (11.TAP-CL15035) Wall mounted concealed lever sink set. 3 Star 8.5lpm. 165mm curved swivel spout with 150mm lever handles. Supply only - Kit MUST be fitted by a licensed plumber. Pre-Rinse Unit (11.TAP-JETF3000W) Splashback mounted Jetflo hot and cold wall mounted pre rinse unit with pot filler & 100mm lever recessed control valves. Fits to SmartSink splashback (sink unit not included.) Includes related hardware & braided connection hoses. Nominated sink unit will have mounting holes pre-drilled if sink & tapware are ordered together. Supply only - Kit MUST be fitted by a licensed plumber. 6 Star 4lpm. 150kpa to 500kpa at up to 80 degrees celsius. Centre of levers to top of spring approximately 710mm. WaterMark Licence WMKA25617 - AS/NZS 3718:2005.
10 Laboratory Stop Tap - Recirculating (11.TAP-DURA295) Hob mounted laboratory recirculating tap. Detachable tube nozzle. Special waters. 50kpa to 500kpa operating pressure. 5 to 80 degree operating temperature. RO water compatible. Supply only - Kit MUST be fitted by a licensed plumber. Laboratory Bib Tap - Wall Mounted (11.TAP-DURA298) Wall mounted laboratory bib tap Detachable tube nozzle. Special waters. 50kpa to 1000kpa operating pressure. 5 to 70 degree operating temperature. WELS/Green Star - 4, 5 & 6 star rating. RO water compatible. Supply only - Kit MUST be fitted by a licensed plumber. Laboratory Bib Tap - Hob Mounted (11.TAP-DURA299) Hob mounted laboratory bib tap. Detachable tube nozzle. Special waters. 50kpa to 1000kpa operating pressure. 5 to 70 degree operating temperature. WELS/Green Star - 4, 5 & 6 star rating. RO water compatible. Supply only - Kit MUST be fitted by a licensed plumber. Cleaning Jet Pistol with Standard Set (47.M90-001-00) Spray jet cleaning pistol. Suitable for both air or water use. Includes 1.5m tube, guide cone, standard attachment set, 1/4 hose barb required to connect to water or air, wall hook. Supply only - Kit MUST be fitted by a licensed plumber.
11 FIXED SINKS Double Sink - Bench On Left (16.DS-L) 1900mmL x 700mmW x 900mmH 304 Grade commercial quality stainless steel bench with sinks. 2 rectangular bowls with bench on left. Bowls are 300mm deep, 500mm long, 450mm wide. Double Sink - Bench in Middle (16.DS-M) 1300mmL x 700mmW x 900mmH 304 Grade commercial quality stainless steel bench with sinks. 2 rectangular bowls with bench in middle. Bowls are 300mm deep, 500mm long, 450mm wide. Double Sink - Bench On Left & Right (16.DS-RL) 2600mmL x 700mmW x 900mmH 304 Grade commercial quality stainless steel bench with sinks. 2 rectangular bowls with bench on left and right. Bowls are 300mm deep, 500mm long, 450mm wide. Double Sink - Bench On Right (16.DS-R) 1900mmL x 700mmW x 900mmH 304 grade commercial quality stainless steel bench with sinks. 2 rectangular bowls with bench on right. Single Sink - Bench On Left (16.SS-L) 1350mmL x 700mmW x 900mmH 304 grade commercial quality stainless steel bench with sink. 1 rectangular bowl with bench on left. Bowl is 300mm deep, 500mm long, 450mm wide.
12 Single Sink - No Bench (16.SS-N) 1300mmL x 700mmW x 900mmH 304 grade commercial quality stainless steel sink. 1 rectangular bowl, no bench. Bowl is 300mm deep, 500mm long, 450mm wide. Single Sink - Bench on Right (16.SS-R) 1350mmL x 700mmW x 900mmH 304 grade commercial quality stainless steel bench with sinks. 1 rectangular bowl with bench on right. Bowl is 300mm deep, 500mm long, 450mm wide. Single Sink - Bench On Left & Right (16.SS-RL) 1350mmL x 700mmW x 900mmH 304 grade commercial quality stainless steel bench with sinks. 1 rectangular bowl with bench on left and right. Bowl is 300mm deep, 500mm long, 450mm wide. Hand Basin (16.SS-HB) 430mmL x 380mmW 304 grade commercial quality stainless steel handbasin. Bowl wall mount.
13 WASHER RACKS Washer Racks are designed to improve safety & space requirements when storing batch washer racks HOW IT WORKS: 1. Roll your trolley up to the docling point. 2. Roll off the basket into desired bay. 3. Raise or lower rack to access racks from either top or bottom storage level. Better manage your space and OHS issues. Washer racks do not require manual lifting; they roll off the trolley and onto the two-level storage rack. Available for most washer brands and in 4, 6 and 8 rack capacity. 4 Bay 6 Bay 8 Bay Washer Rack Lifter - Static Static Electric Height Adjustable Rack System for Storage of Washer Racks 4 Bay Belimed Baskets - (30.WRL-4S-B) 1930mmL x 962mmD x 1930mmH 6 Bay Belimed Baskets - (30.WRL-6S-B) 2588mmL x 962mmD x 1930mmH 8 Bay Belimed Baskets - (30.WRL-8S-B) 3246mmL x 962mmD x 1930mmH 6 Bay Miele Baskets - (30.WRL-6S-M) 2588mmL x 962mmD x 1930mmH 8 Bay Steris Baskets - (30.WRL-8S-S) 3246mmL x 977mmD x 2332mmH Static unit. Hand operated control of 2 stage electric height adjustment. Stainless steel construction. 280kg maximum capacity. (Only suitable for storage of empty washer racks.) Belimed Variations: Suit BeliMed baskets & matching trolley; baskets 610mm wide x 750mm deep x up to 670mm high. Miele Variations: Suit Miele baskets & matching trolley; baskets 635mm wide x 790mm deep x up to 610mm high. Steris Variation: Suits baskets 647mm wide x 671mm deep x up to 600mm high. NOTE - Trolleys and/or baskets are not included. Standard 240 Volt 10amp general power outlet required within 2000mm of centre.
14 4 Bay 6 Bay 8 Bay Washer Rack Lifter - Mobile Mobile Electric Height Adjustable Rack System for Storage of Washer Racks 8 Bay Belimed Baskets - (30.WRL-8M-B) 3266mmL x 962mmD 4 Bay Getinge Baskets - (30.WRL-4M-G) 1890mmL x 927mmD 6 Bay Getinge Baskets - (30.WRL-6M-G) 2608mmL x 927mmD 8 Bay Getinge Baskets - (30.WRL-8M-G) 3266mmL x 927mmD 6 Bay Miele Baskets - (30.WRL-6M-M) 2608mmL x 927mmD 8 Bay Miele Baskets - (30.WRL-8M-M) 3266mmL x 962mmD Mobile unit. Hand operated control of 2 stage electric height adjustment. Overall Height (including baskets at maximum extension) 2332mm. Stainless steel construction with 4 x 100mm medium duty brake locking castors. 280kg maximum capacity. (Only suitable for storage of empty washer racks.) GETINGE: Variations suit Getinge Turbo 88 baskets & matching trolley. Suits baskets 648mm wide x 805mm deep x up to 657mm high. (NOTE: Getinge trolley docking blocks, trolleys or baskets not included.) MIELE: Variations suit Miele baskets & matching trolley. Suits baskets 635mm wide x 790mm deep x up to 610mm high. BELIMED: Variations suit BeliMed baskets & matching Trolley. Suits baskets 610mm wide x 750mm deep x up to 670mm high. NOTE: Trolleys and/or baskets are not included. Standard 240 Volt 10amp general power outlet required within 2000mm of centre. PLEASE NOTE: Other product variations are available upon request. Please contact the Sales Team on (07) 5478 9977 or email sales@smartlinemachinery.com.
15 Bench with splashback corner unit. SPLASHBACK BENCHES Splashback Corner Unit 700 x 700 x 900mm - (16.CORNER UNIT SM) 900 x 900 x 900mm - (16.CORNER UNIT) Narrow Splashback Bench - 600 x 450 x 900mm (16.06045SP) 600mmL x 450mmW x 900mmH Bench with splashback - 50mm x 40mm. Splashback Bench - 600 x 700 x 900mm (16.0600SP) 600mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm. Splashback Bench - 800 x 700 x 900mm (16.0800SP) 800mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm. Narrow Splashback Bench - 900 x 450 x 900mm (16.09045SP) 900mmL x 450mmW x 900mmH Bench with splashback - 50mm x 40mm.
16 Splashback Bench - 1000 x 700 x 900mm (16.1000SP) 1000mmL x 700mmW x 900mmH Bench with splashback. Narrow Splashback Bench - 1200 x 450 x 900 mm (16.12045SP) 1200mmL x 450mmW x 900mmH Bench with splashback - 50mm x 40mm. Splashback Bench - 1200 x 600 x 900mm (16.P1200) 1200mmL x 610mmW x 900mmH 304 grade commercial quality stainless steel. Bench with splashback - 150mm x 40mm. Stainless undershelf. Sound deadening layer underbench top. Splashback Bench - 1200 x 700 x 900mm (16.1200SP) 1200mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm. Splashback Bench - 1500 x 700 x 900mm (16.1500SP) 1500mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm. Narrow Splashback Bench - 1500 x 450 x 900mm (16.15045SP) 1500mmL x 450mmW x 900mmH Bench with splashback - 50mm x 40mm.
Splashback Bench - 1600 x 700 x 900mm (16.1600SP) 1600mmL x 700mmW x 900mmH Bench with splashback. Splashback Bench - 1800 x 700 x 900mm (16.1800SP) 1800mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm. Narrow Splashback Bench - 1800 x 450 x 900mm (16.18045SP) 1800mmL x 450mmW x 900mmH Bench with splashback - 50mm x 40mm. Splashback Bench - 1800 x 610 x 900mm (16.P1800) 1800mmL x 610mmW x 900mmH Bench with splashback - 150mm x 40mm. 17 Splashback Bench - 2000 x 700 x 900mm (16.2000SP) 2000mmL x 700mmW x 900mmH Bench with splashback - 150 x 40mm. Splashback Bench - 2400 x 700 x 900mm (16.2400SP) 2400mmL x 700mmW x 900mmH Bench with splashback - 150mm x 40mm.
18 BENCHES Bench - 610 x 610 x 900mm (16.2424) 610mmL x 610mmW x 900mmH Bench - 760 x 760 x 900mm (16.3030) 762mmL x 762mmW x 900mmH Bench - 910 x 610 x 900mm (16.2436) 910mmL x 610mmW x 900mmH Bench - 910 x 760 x 900mm (16.3036) 914mmL x 762mmW x 900mmH Bench - 910 x 1210 x 900mm (16.3648) 914mmL x 1219mmW x 900mmH
Bench - 1220 x 610 x 900mm (16.2448) 1219mmL x 610mmW x 900mmH 19 Bench - 1220 x 760 x 900mm (16.3048) 1219mmL x 762mmW x 900mmH Bench - 1520 x 610 x 900mm (16.2460) 1524mmL x 610mmW x 900mmH Bench - 1520 x 760 x 900mm (16.3060) 1524mmL x 762mmW x 900mmH Bench - 1520 x 910 x 900mm (16.3060) 1524mmL x 914mmW x 900mmH Bench - 1830 x 610 x 900mm (16.2472) 1829mmL x 610mmW x 900mmH
20 Bench - 1830 x 760 x 900mm (16.3072) 1829mmL x 762mmW x 900mmH Bench - 1830 x 910 x 900mm (16.3672) 1829mmL x 914mmW x 900mmH Bench - 2130 x 610 x 900mm (16.2484) 2134mmL x 610mmW x 900mmH Bench - 2130 x 910 x 900mm (16.3684) 2133mmL x 914mmW x 900mmH Bench - 2440 x 610 x 900mm (16.2496) 2438mmL x 610mmW x 900mmH Bench - 2440 x 760 x 900mm (16.3096) 2438mmL x 762mmW x 900mmH