Safer. Smarter. Tyco. Simple On The Outside...
...Effective On The Inside Tyco Fire Protection Products is the leading manufacturer and distributor of water-based fire suppression systems and components, offering one of the broadest lines of fire protection system equipment worldwide. Continually expanding its capabilities through proactive research and product development, it providers its customers with effective fire protection and construction solutions for residential, commercial, industrial and institutional buildings. We supply a wide range of sprinklers, alarm valves and accessories as well as CPVC pipe & fittings, flowmeters, general purpose valves, hydrants, couplings and grooved fittings, sprinkler support materials, foam products and hardware. Tyco has branches strategically located throughout Europe and the Middle East to provide customers with the best possible service.
The Cabinets What makes it special? Easy to Install // Entire package is pre-wired // Water inlet and outlets to the valve riser are grooved to ensure minimal installation time // Completely pre-trimmed valve inside // Easy to move lift point eye bolts // Tested and fully functional Weather Proof // Available with optional heated housing // Applicable for indoor OR outdoor use // Comes complete with water resistant seal to project the entire contents of the cabinet Pre-tested // Tyco s cabinet system provides you with one complete solution with no need for any additional testing. The valves and components are all pre-tested by our Tyco engineers European Made // Uses the famous DV-5 which is produced in Spain // Designed, engineered and built at our Centre of Excellence for valve engineering in the Netherlands The TYCO DV-5 Red-E Cabinet, is a pre-assembled fire protection valve package enclosed within a free-standing cabinet designed to occupy minimal floor space and provide an enclosure for a fire protection valve riser. The packaged DV-5 Red-E Cabinet is pre-wired and the water inlet and outlets to the valve riser are grooved. The valve package includes the system (manual) shut-off control valve, a downstream shut-off valve, an automatic water control valve with electric actuation with galvanized trim and supervisory switches.
Options: Deluge Wet Deluge Dry Deluge Electric Heater 4 4 4 Light and socket plug 230VAC 4 4 4 Water motor alarm WMA-1 4 4 4 Low temperature switch 4 4 4 Manual pull station accessible from the outside 4 4 4 Without downstream butterfly valve 4 4 4 Cabinet colour grey RAL7035 4 4 4 Potter Release Panel 4 4 4 Handbook 4 4 4 Factory acceptance test 4 4 4 Split flanges (adapter grooved to flanged) 4 4 4 Always refer to the Technical Data Sheet TFP1303 for complete description of all listing criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty. LIFT POINT EYE BOLTS WATERFLOW PRESSURE ALARM SWITCH DRAIN DRAIN HEADER (CONNECTION EITHER SIDE OF CABINET) OPTIONAL RELEASING PANEL WITH LOCKING DOOR WATER SUPPLY HEADER (CONNECTION EITHER SIDE OF CABINET) CABINET (LOCKING DOORS NOT SHOWN) PRESSURE GAUGES DV-5 WITH ELECTRIC ACTUATION DELUGE TRIM DISCHARGE CONNECTION SOLENOID MANUAL STATION LEFT SIDE FRONT
How The Valve Functions All switches within the cabinet are pre-wired to a junction box. An optional control panel is available and is pre-wired. The control panel can be used to make the electrical connections for power, detection circuits, and alarms, the only remaining connections to complete the system. In addition to the optional control panel being integral to the DV-5 Red-E Cabinet, windows have been pro vided in the door for viewing the essential system pressure gauges. Locks for the cabinet door and the control panel access are standard. The outdoor version of the DV-5 Red-E Cabinet, Middle East have sealed doors and connections to the elements. Optimized Production Process Detailed Engineering Standard Cabinets Customer Sign off Standard Cabinets + options Special Cabinets Time scale By making use of optimized process Tyco is able to offer standardized cabinets and standardized cabinets with certain range of specific options. For these cabinets Detailed Engineering and Customer Sign Off can be done at the same time. This is enabled by an already prepared Detailed Engineering, availability of a Datasheet (TFP1303) and a quick quoting process. For Special Cabinets Tyco will follow the Detailed Engineering and Customer Sign Off as two separate steps. First the Detailed Engineering will be completed based on a discussion with the customer concerning his needs. Customer feedback on our designs is essential to ensure the exact needs of our customers are fulfilled. Based on this feedback and input from the customer, a quotation will be produced. We will only begin production when the customer is completely happy with the design and features of the cabinet.