BSOL Modules Key Series

BSOL Modules Key Series There are 53 BSOL modules based on International Classification for Standards (ICS), which now have the series expressed in the tables over page with the inclusion of the top 100 selling standards. In terms of definition, key series means that there are more than 5 parts to a single standard. BSOL Modules Key Series

GBM01 BS 6938 BS 8888 BS EN 60191 BS EN ISO 3098 BS EN 10204 BS EN 1041 BS EN 980 BS ISO 14617 BS ISO 31 Documentation Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals Technical product specification. Specification Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of integrated circuits Technical product documentation. Lettering. Cyrillic alphabet Graphical symbols for diagrams. Pumps, compressors and fans Quantities and units. Physical chemistry and molecular physics Metallic materials. Types of inspection documents Information supplied by the manufacturer of medical devices Symbols for use in the labelling of medical devices GBM02 BS 10008 BS 10012 BS EN 726 BS ISO/IEC 10373 BS ISO/IEC 11694 BS ISO/IEC 7816 DD CEN ISO/TS 18234 DD CEN/TS 14821 Information & Finance Evidential weight and legal admissibility of electronic information. Specification Data protection. Specification for a personal information management system Identification card systems Identification cards. Test methods. Vicinity cards Identification cards. Optical memory cards Identification cards. Integrated circuit cards Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) data-streams Traffic and travel information (TTI). TI messages via cellular networks

GBM03 BS 499-1 BS EN ISO 9000 BS 7313 BS 7562 BS EN 13481 BS EN 14035 BS EN 1504 BS EN 415 BS EN 61511 BS EN 844 BS IEC 60050 BS ISO 1998 BS ISO 2382 BS ISO 2382 BS ISO/IEC 2382 DD CEN ISO/TS 12781 Vocabularies Welding terms and symbols Quality management systems. Fundamentals and vocabulary Prosthetics and orthotics. Terminology Planning, design and installation of irrigation schemes Railway applications Fireworks Products and systems for the protection and repair of concrete structures Safety of packaging machines Functional safety Round and sawn timber International electrotechnical vocabulary Petroleum industry Information processing systems Information technology. Vocabulary. Fundamental terms Information technology. Computer programming Geometrical product specifications (GPS)

GBM04 Management, Law & Quality BS CECC 00114 Rule of procedure 14 BS 8900 series Guidance for managing sustainable development BS 25777 Information and communications technology continuity management. Code of practice BS 18004 Guide to achieving effective occupational health and safety performance BS 25999 Business continuity management BS 31100 Risk management. Code of practice BS 6001 Sampling procedures for inspection by attributes BS 8901 Specification for a sustainability management system for events BS 8903 Principles and framework for procuring sustainably. Guide BS EN 16001 Energy Management Systems: Specification with Guidance for Use BS EN 9100 Quality management systems. Requirements for aviation, space and defence organizations BS EN ISO 14004 Environmental management systems. General guidelines on principles, systems and support techniques BS EN ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories BS EN ISO 13485 Medical devices. Quality management systems. Requirements for regulatory purposes BS EN ISO 14001 Environmental management systems. Requirements with guidance for use BS EN ISO 19011 Guidelines for quality and/or environmental management systems auditing BS EN ISO 22000 Food safety management systems. Requirements for any organization in the food chain BS EN ISO 9001 Quality management systems. Requirements BS EN ISO 9004 Managing for the sustained success of an organization. A quality management approach BS ISO/IEC 27001 Information technology. Security techniques. Information security management systems. Requirements BS ISO/IEC 27002 Information technology. Security techniques. Code of practice for information security management BS ISO 31000 Risk management. Principles and guidelines BS OHSAS18001 Occupational health and safety management systems. Requirements BS OHSAS18002 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 ISO 26000 Social Responsibility

GBM05 BS 7843 BS 8300 BS 8580 BS EN 60601 BS EN 61010 BS EN 62304 BS EN 62366 BS EN ISO 14971 BS EN 13311 BS EN 13726 BS EN 61010 BS EN 61223 BS EN 868 BS EN ISO 11979 BS EN ISO 21549 BS EN ISO 389 BS EN ISO 6360 BS EN ISO 8536 BS EN ISO 8536 BS ISO 5834 Sciences & Healthcare Guide to the acquisition and management of meteorological precipitation data. Network design Design of buildings and their approaches to meet the needs of disabled people. Code of practice Water quality. Risk assessments for Legionella control. Code of practice Medical electrical equipment Safety requirements for electrical equipment for measurement, control and laboratory use Medical device software. Software life-cycle processes Medical devices. Application of usability engineering to medical devices Medical devices. Application of risk management to medical devices Biotechnology. Performance criteria for vessels. General performance criteria Test methods for primary wound dressings Safety requirements for electrical equipment for measurement, control and laboratory use Evaluation and routine testing in medical imaging departments Packaging materials and systems for medical devices which are to be sterilized Ophthalmic implants Health informatics Acoustics Dentistry Infusion equipment for medical use. Aluminium caps for infusion bottles Infusion equipment for medical use. Infusion sets for single use, gravity feed Implants for surgery

GBM06 BS EN 12255 BS EN 13920 BS EN 840 BS EN ISO 14644 BS EN ISO 16000 BS EN ISO 5667 BS ISO 16232 BS ISO 5667 Environment & Waste Wastewater treatment plants Aluminium and aluminium alloys Mobile waste containers Cleanrooms and associated controlled environments Indoor air Water quality Road vehicles Water quality GBM07 BS 7971 BS EN 13087 BS EN 13274 BS EN 13277 BS EN 13463 BS EN 381 BS EN 60079 BS EN ISO 12402 BS EN ISO 8662 BS EN ISO 9241 BS ISO 11929 Occupational & Personal Safety Protective clothing and equipment for use in violent situations and in training Protective helmets Respiratory protective devices Protective equipment for martial arts Non-electrical equipment for potentially explosive atmospheres Protective clothing for users of hand-held chain saws Explosive atmospheres Personal flotation devices Hand-held portable power tools Ergonomics of human-system interaction Determination of the detection limit and decision threshold for ionizing radiation measurements

GBM08 BS EN 12561 BS EN 1366 BS EN 15004 BS EN 54 BS EN 60695 BS EN ISO 4126 BS ISO 11907 BS ISO/TR 13387 PD 7974 Fire, Accident & Crime Prevention Railway applications Fire resistance tests for service installations Fixed firefighting systems Fire detection and fire alarm systems Fire hazard testing Safety devices for protection against excessive pressure Plastics Fire safety engineering Application of fire safety engineering principles to the design of buildings GBM09 BS 5857 BS 7698 BS EN 61000 BS EN 13523 BS EN 1793 BS EN 60044 BS EN 60404 BS EN 61788 BS EN ISO 286 BS EN ISO 10360 BS EN ISO 8502 BS EN ISO 9902 BS ISO 16063 BS ISO 5725 Metrology Methods for measurement of fluid flow in closed conduits, using tracers Reciprocating internal combustion engine driven alternating current generating sets Electromagnetic compatibility (EMC) Coil coated metals Road traffic noise reducing devices Instrument transformers Magnetic materials Superconductivity Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Geometrical product specifications (GPS) Preparation of steel substrates before application of paints and related products Textile machinery Methods for the calibration of vibration and shock transducers Accuracy (trueness and precision) of measurement methods and results

GBM10 BS EN 583 BS EN 60068 BS EN 60721 PD IEC TR 60721 Testing Non-destructive testing Environmental testing Classification of environmental conditions. Environmental parameters and their severities Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 GBM11 BS 7371 BS EN 14399 BS EN ISO 898 Screw Threads & Fasteners Coatings on metal fasteners High-strength structural bolting assemblies for preloading Mechanical properties of fasteners made of carbon steel and alloy steel GBM12 BS ISO 3547 Mechanical Systems & Components Plain bearings GBM13 BS 8010 BS 848 BS EN 12560 BS EN 12952 BS EN 12953 BS EN 13160 BS EN 13445 BS EN 134802 BS EN 14420 BS EN 1822 BS ISO 16589 BS ISO 3601 BS ISO 4433 PD 5500 Fluid Systems & Components Code of practice for pipelines Fans for general purposes Flanges and their joints Water-tube boilers and auxiliary installations Shell boilers Leak detection systems Unfired pressure vessels Metallic industrial piping Hose fittings with clamp units High efficiency air filters (HEPA and ULPA) Rotary shaft lip-type seals incorporating thermoplastic sealing elements Fluid power systems Thermoplastics pipes Specification for unfired fusion welded pressure vessels

GBM14 BS 6548 BS EN 50109 BS EN 50260 BS EN 60745 BS EN 61029 BS EN 61069 BS EN 61131 BS EN 61158 BS EN 61326 BS EN 61784 BS EN 792 BS ISO 10303 BS ISO 10791 BS ISO 10889 BS ISO 230 BS ISO 603 Manufacturing Engineering Maintainability of equipment Hand crimping tools Safety of hand-held battery-powered motor-operated tools and battery packs Hand-held motor-operated electric tools. Safety Safety of transportable motor-operated tools Industrial-process measurement and control Programmable controllers Industrial communication networks Electrical equipment for measurement, control and laboratory use Industrial communication networks Hand-held non-electric power tools Industrial automation systems and integration Test conditions for machining centres Tool holders with cylindrical shank Test code for machine tools Bonded abrasive products GBM15 BS 7910 BS EN 1011 BS EN 12373 BS EN 12441 BS EN 12814 BS EN 60974 BS EN ISO 11126 BS EN ISO 11127 BS EN ISO 12944 BS EN ISO 14744 Metal Treatment & Welding Guide to methods for assessing the acceptability of flaws in metallic structures Welding. Recommendations for welding of metallic materials Aluminium and aluminium alloys Zinc and zinc alloys Testing of welded joints of thermoplastics semi-finished products Arc welding equipment Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Paints and varnishes Welding. Acceptance inspection of electron beam welding machines

GBM15 BS EN ISO 15614 BS EN ISO 17657 BS EN ISO 6507 BS EN ISO 1461 BS EN ISO 2081 BS EN ISO 2082 BS EN ISO 5817 BS EN ISO 6892 BS EN ISO 8501 BS EN ISO 9455 Metal Treatment & Welding (continued) Specification and qualification of welding procedures for metallic materials Resistance welding Metallic materials Soft soldering fluxes Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections Metallic materials. Tensile testing Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness GBM16 BS 5341 BS EN 45510 BS EN 61400 BS IEC 61366 BS ISO 3977 Energy & Heat Engineering Piston rings up to 200 mm diameter for reciprocating internal combustion engines Guide for the procurement of power station equipment Wind turbine generator systems Hydraulic turbines, storage pumps, and pump turbines Gas turbines GBM17 BS 7671 BS EN 60950 Electrical engineering in general Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition Information technology equipment. Safety

GBM18 BS 5626 BS 7870 BS EN 50363 BS EN 60674 BS EN 60684 BS EN 62317 Electrical Components Cellulosic papers for electrical purposes LV and MV polymeric insulated cables for use by distribution and generation utilities Insulating, sheathing and covering materials for low voltage energy cables Specification for plastic films for electrical purposes Specification for flexible insulating sleeving Ferrite cores GBM19 BS 6972 BS 7654 BS EN 61439 BS EN 60255 BS EN 60998 BS EN 61169 BS EN 61241 BS EN 61643 BS EN 61811 BS EN 62271 BS IEC 61892 Electrical Accessories & Special Equipment Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems Low-voltage switchgear and control gear assemblies Electrical relays Connecting devices for low voltage circuits for household and similar purposes Radio-frequency connectors Electrical apparatus for use in the presence of combustible dust Low voltage surge protective devices Electromechanical non-specified time all-or-nothing relays of assessed quality High-voltage switchgear and controlgear Mobile and fixed offshore units GBM20 BS EN 50216 BS EN 60076 BS EN 61334 BS EN 61558 BS EN 61800 PD IEC/TR 61000 Electric Lamps, Power Generation, Distribution & Storage Power transformers and reactor fittings Power transformers Distribution automation using distribution line carrier systems Safety of power transformers, power supply units and similar products Adjustable speed electrical power drive systems Electromagnetic compatibility (EMC)

GBM21 BS 6221 BS 9070 BS 9073 BS 9364 BS 9612 BS 9612 BS EN 60286 BS EN 60368 BS EN 60384 BS EN 60444 BS EN 60738 BS EN 61188 BS EN 61189 BS EN 61249 BS EN 61338 BS EN 61360 BS EN 61747 BS IEC 60747 PD ES 59008 Electronic Component & Devices Printed wiring boards Specification for fixed capacitors of assessed quality: generic data and methods of test Detail specification for fixed tantalum electrolytic capacitors Detail specification for low power silicon n-p-n switching transistors Detail specification for cold welded seal quartz crystal units for oscillator applications Detail specification for resistance welded seal quartz crystal units for oscillator applications Packaging of components for automatic handling Piezoelectric filters Fixed capacitors for use in electronic equipment Measurement of quartz crystal unit parameters Thermistors. Directly heated positive step-function temperature coefficient Printed boards and assemblies Test methods for electrical materials, interconnection structures and assemblies Materials for printed boards and other interconnecting structures Waveguide type dielectric resonators Standard data element types with associated classification scheme for electric components. Liquid crystal and solid-state display devices. Measuring methods for liquid crystal modules. Transmissive type Semiconductor devices Data requirements for semiconductor die GBM22 BS 5817 BS EN 60268 BS EN 60297 BS EN 60512 BS EN 61076 BS IEC 60748 Electromechanical Components Specification for audiovisual, video and television equipment and systems Sound system equipment Mechanical structures for electronic equipment Connectors for electronic equipment. Tests and measurements. Voltage stress tests Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests Semiconductor devices

GBM23 BS 6160 BS 6288 BS 6789 BS EN 50157 BS EN 50289 BS EN 60094 BS EN 60244 BS EN 60728 BS EN 60793 BS EN 60835 BS EN 60870 BS EN 60958 BS EN 61000 BS EN 61120 BS EN 61162 BS EN 61281 BS EN 61290 BS EN 61291 BS EN 61300 BS EN 61580 BS EN 61603 BS EN 61754 BS EN 61755 BS EN 61834 BS EN 61850 BS EN 61883 BS EN 61937 BS EN 61970 Telecommunications Radio equipment used in mobile services Magnetic tape sound recording and reproducing systems Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators Domestic and similar electronic equipment interconnection requirements: AV. link. General Communication cables Magnetic tape sound recording and reproducing systems Methods of measurement for radio transmitters Cable networks for television signals, sound signals and interactive services Optical fibres Methods of measurement for equipment used in digital microwave radio transmission systems Telecontrol equipment and systems Digital audio interface Electromagnetic compatibility (EMC) Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use Maritime navigation and radiocommunication equipment and systems Fibre optic communication subsystems Optical amplifiers Optical fibre amplifiers Fibre optic interconnecting devices and passive components Methods of measurement for waveguides Transmission of audio and/or video and related signals using infrared radiation Fibre optic connector interfaces Fibre optic connector optical interfaces Recording Communication networks and systems in substations Consumer audio/video equipment Digital audio Energy management system application program interface (EMS-API)

GBM23 BS EN 62148 BS EN 55022 BS IEC 60874 BS ISO/IEC 8473 BS ISO/IEC TR 11802 PD 6560 PD 6569 PD CISPR/TR 16 PD IEC TR 61282 PD IEC TR 62056 Telecommunications (continued) Fibre optic active components and devices. Package and interface standards Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement Connectors for optical fibres and cables Information technology. Protocol for providing the connectionless-mode network service Information technology. Telecommunications and information exchange between systems A draft amendment to BS 6305:1992 "Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunications operators" Draft standard to match to and work with ETS 300 001/NET4 "Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators". Specification for general requirements Specification for radio disturbance and immunity measuring apparatus and methods Fibre optic communication system design guides Electricity metering GBM24 BS EN ISP 12061 BS ISO/IEC 1018 BS ISO/IEC 13249 BS ISO/IEC 13522 BS ISO/IEC 14496 BS ISO/IEC 18000 BS ISO/IEC 19794 BS ISO/IEC 8859 BS ISO/IEC 9594 BS ISO/IEC 9636 BS ISO/IEC 9798 BS ISO/IEC ISP 12059 BS ISO/IEC 27005 Information Technology - Software & Networking Information technology. Open systems interconnection Information technology. Security frameworks for open systems Information technology. Database languages Information technology. Coding of multimedia and hypermedia information Information technology. Coding of audio-visual objects Information technology. Radio frequency identification for item management Information technology. Biometric data interchange formats Information technology. 8-bit single-byte coded graphic character sets Information technology. Open systems interconnection Information technology. Computer graphics Information technology. Security techniques Information technology. International standardized profiles Information technology. Security techniques. Information security risk management

GBM25 BS 7023 BS EN 62056 BS EN ISO 16484 BS ISO 11783 Information Technology - Hardware & Office Machines Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency Electricity metering Building automation and control systems (BACS) Tractors and machinery for agriculture and forestry GBM26 BS ISO 10109 BS ISO 10110 BS ISO 14490 Image Technology Optics and photonics Optics and optical instruments. Preparation of drawings for optical elements and systems Optics and optical instruments. Test methods for telescopic systems GBM27 BS AU 162a BS AU 163a BS ISO 22902 Road Vehicle Engineering Specification for headlamp optical aiming devices Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles Road vehicles GBM28 BS EN 12927 BS EN 13145 BS EN 13230 BS EN 13775 Railway Engineering Safety requirements for cableways installation designed to carry persons Railway applications. Test methods for telescopic systems Railway applications. Track Railway applications. Measuring of new and modified freight wagons GBM29 BS IEC 60092 Shipbuilding & Marine Structures Electrical installations in ships

GBM30 Aircraft & Aerospace Engineering BS EN 12312 Aircraft ground support equipment BS EN 13290 Space project management BS EN 14607 Space engineering BS EN 2155 Specification for test methods for transparent materials for aircraft glazing BS EN 2266 Aerospace series. Cables, electrical, for general purpose BS EN 2349 Aerospace series. Requirements and test procedures for relays and contactors BS EN 2436 Aerospace series. Paints and varnishes BS EN 2591 Elements of electrical and optical connection BS EN 2713 Aerospace series. Cables, electrical, single and multicore for general purpose BS EN 2997 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak BS EN 3155 Aerospace series. Electrical contacts used in elements of connection BS EN 3372 Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 C to 175 C or 200 C continuous BS EN 3475 Aerospace series. Cables, electrical, aircraft use BS EN 3660 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors BS EN 3682 Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous BS EN 3733 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous BS EN 3773 Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max BS EN 3841 Aerospace series. Circuit breakers BS EN 4008 Aerospace series. Elements of electrical and optical connection BS EN 4057 Aerospace series. Cable ties for harnesses BS EN 4165 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175$0DC continuous BS EN 4531 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring BS EN 4626 Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 C to 125 C (cable dependent) BS ISO 14951 Space systems. Fluid characteristics BS ISO 15859 Aerospace series. Fluid characteristics

GBM31 BS B 23 BS TA 59 Materials for Aerospace Construction Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa) GBM32 BS EN 2335 Aerospace Components & Fasteners Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot GBM33 BS 5667 BS EN 13411 BS EN 1677 BS EN 818 Materials Handling Equipment Specification for continuous mechanical handling equipment - safety requirements Terminations for steel wire ropes Components for slings Short link chain for lifting purposes GBM34 BS EN 15433 BS EN 60264 BS EN ISO 9100 Packaging & Distribution Transportation loads Packaging of winding wires Glass containers GBM35 BS 5866-1 BS EN ISO 105 BS EN ISO 11111 BS EN ISO 9073 BS ISO 105 Textiles, Leather & Clothing Blankets suitable for use in the public sector Textiles. Tests for colour fastness Textile machinery Textiles. Test methods for nonwovens Textiles. Tests for colour fastness

GBM36 BS 3998 BS 5837 BS EN 12324-1:1999 BS EN 13739-1:2003 Agriculture & Agricultural Engineering Tree work. Recommendations Trees in relation to construction. Recommendations Irrigation techniques Agricultural machinery GBM37 BS 6248 BS EN 12851 BS EN 13130 BS EN ISO 14673 BS EN ISO 8442 DD CEN/TS 13130 Food Technology Caseins and caseinates Food processing machinery Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of isocyanates in plastics Milk and milk products Materials and articles in contact with foodstuffs. Cutlery and table holloware Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acetic acid, vinyl ester in food simulants GBM38 BS 5598 BS 5688 BS 6070 BS 6075 BS 6092 BS 6392 BS 7319 BS 7709 BS EN 13630 BS EN 13631 BS EN 13763 BS EN 13938 Chemical Technology Methods of sampling and test for halogenated hydrocarbons Methods of test for orthoboric acid (boric acid), $7Idi$7Rboron trioxide (boric oxide), $7Idi$7Rsodium tetraborates, sodium perborates and crude sodium borates for industrial use Methods of sampling and test for sodium carbonate for industrial use Methods of sampling and test for sodium hydroxide for industrial use Methods of sampling and test for sodium and potassium silicates for industrial use Testing of ethanol for industrial use Analysis of sodium chloride for industrial use Analysis of extract solutions of glass Explosives for civil uses. Detonating cords and safety fuses Explosives for civil uses. High explosives Explosives for civil uses. Detonators and relays Explosives for civil uses. Propellants and rocket propellants

GBM39 BS 6870 BS EN ISO 10426 BS EN ISO 10438 BS EN ISO 13628 BS ISO 4266 DD CEN/TS 14780 Mining & Petroleum Technologies Analysis of aluminium ores Petroleum and natural gas industries. Cements and materials for well cementing Petroleum, petrochemical and natural gas industries Petroleum and natural gas industries. Design and operation of subsea production systems Petroleum and liquid petroleum products Solid biofuels GBM40 BS 6200 BS 6721 BS 6783 BS 7455 BS ISO 11438 Metallurgy Sampling and analysis of iron, steel and other ferrous metals. Introduction and contents Sampling and analysis of copper and copper alloys Sampling and analysis of nickel, ferronickel and nickel alloys Analysis of nickel alloys by flame atomic absorption spectrometry Ferronickel GBM41 BS EN 12385 BS EN 24491 BS EN 755 Metal Products Steel wire ropes Metallic powders Aluminium and aluminium alloys GBM42 BS EN 312 BS EN 848 Wood Technology Particleboards Safety of woodworking machines GBM43 BS 6262 BS 7034 BS EN 13035 BS EN 725 BS EN 993 Glass & Ceramics Industries Glazing for buildings Viscosity and viscometric fixed points of glass Machines and plants for the manufacture, treatment and processing of flat glass Advanced technical ceramics Methods of test for dense shaped refractory products

GBM44 BS 5293 BS 6057 BS 7164 BS 903 BS 2782 BS 4443 BS 5350 BS 7442 BS 7825 BS EN 302 BS 7291 Rubber Industry Sampling and testing carbon black for use in the rubber industry Rubber latices. Specification and coding Chemical tests for raw and vulcanized rubber Physical testing of rubber Methods of testing plastics Methods of test for flexible cellular materials Methods of test for adhesives Rubber or plastics covered rollers Calibration of rubber and plastics test equipment Adhesives for load-bearing timber structures: test methods Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings GBM45 BS EN ISO 294 Plastics Industry Plastics. Injection moulding of test specimens of thermoplastic materials GBM46 BS 7463 BS EN ISO 12625 BS ISO 11093 Paper Products & Technology Fibre furnish analysis of paper, board and pulps Tissue paper and tissue products Paper and board GBM47 BS EN 927 BS EN ISO 15181 BS EN ISO 2812 BS EN ISO 3262 BS EN ISO 4628 BS EN ISO 787 BS EN ISO 8780 Paint & Colour Industries Paints and varnishes. Coating materials and coating systems for exterior wood Paints and varnishes. Determination of release rate of biocides from antifouling paints Paints and varnishes. Determination of resistance to liquids Extenders for paints Paints and varnishes. Evaluation of degradation of coatings General methods of test for pigments and extenders Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics

GBM48 BS 7036 BS 7334 BS 5440 BS 5930 BS 5975 BS 8102 BS EN 1090 BS EN 1990 BS EN 1991 BS EN 1992 BS EN 1993 BS EN 1994 BS EN 1995 BS EN 12354 BS EN 12629 BS EN 13084 BS EN 13200 BS EN 846 BS EN ISO 140 BS ISO 15686 Construction in General Code of practice for safety at powered doors for pedestrian use Measuring instruments for building construction Flueing and ventilation for gas appliances of rated input not exceeding 70 kw net (1st, 2nd and 3rd family gases) Code of practice for site investigations Code of practice for temporary works procedures and the permissible stress design of falsework Code of practice for protection of below ground structures against water from the ground Execution of steel structures and aluminium structures Eurocode. Basis of structural design Eurocode 1. Actions on structures Eurocode 2. Design of concrete structures. General rules and rules for buildings Eurocode 3. Design of steel structures Eurocode 4. Design of composite steel and concrete structures. General rules Eurocode 5. Design of timber structures Building acoustics Machines for the manufacture of constructional products from concrete and calcium-silicate Free-standing industrial chimneys Spectator facilities Methods of test for ancillary components for masonry Acoustics Buildings and constructed assets

GBM49 BS EN 12274 BS EN 12350 BS EN 12390 BS EN 14187 BS EN 14488 BS EN 14617 BS EN 1848 BS EN 771 BS EN 772 BS EN 933 BS EN 934 BS EN ISO 10545 PD 6682 Building Materials & Components Slurry surfacing Testing fresh concrete Testing hardened concrete Cold applied joint sealants Testing sprayed concrete Agglomerated stone Flexible sheets for waterproofing Specification for masonry units Methods of test for masonry units Tests for geometrical properties of aggregates Admixtures for concrete, mortar and grout Ceramic tiles Aggregates GBM50 BS 6340 BS 6700 BS 6798 BS EN 13141 BS EN 15316 BS EN 60335 BS EN 60335 BS EN 81-1 BS EN 81-2 Building Installations & Finishing Shower units Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Specification Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kw net Ventilation for buildings Heating systems in building Specification for safety of household and similar electrical appliances Household and similar electrical appliances. Safety rules for the construction and installation of lifts Safety rules for the construction and installation of lifts

GBM51 BS 6579 BS 7533 BS EN 13108 BS EN 13286 BS EN 13880 PD 6634 Civil Engineering Safety fences and barriers for highways Pavements constructed with clay, natural stone or concrete pavers Bituminous mixtures Unbound and hydraulically bound mixtures Hot applied joint sealants Vehicle restraint systems GBM52 BS EN 50090 BS EN 60730 BS EN ISO 10472 Domestic Equipment & Appliances Home and building electronic systems (HBES) Automatic electrical controls for household and similar use Safety requirements for industrial laundry machinery GBM53 BS 7044-1:1990 BS EN 12275:1998 BS EN 12503-1:2001 BS EN 13451-1:2001 BS EN 957-9:2003 Sports Equipment & Entertainment Artificial sports surfaces Mountaineering equipment Sports mats Swimming pool equipment Stationary training equipment GBM54 Historical Module Static module of historical standards withdrawn between May 1991 and May 1999, not included in other modules GBM57 BS 2000 BS 2000 Series Methods of test for petroleum and its products

BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com BSI copyright raising standards worldwide BSI Group: Standards Information Software Training Inspection Testing Assessment Certification