EESTI STANDARD EVS-EN ISO 404:2000 Dentistry - Polymer-based filling, restorative and luting materials Dentistry - Polymer-based filling, restorative and luting materials EESTI STANDARDIKESKUS
EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO 404:2000 sisaldab Euroopa standardi EN ISO 404:2000 ingliskeelset teksti. Käesolev dokument on jõustatud 18.12.2000 ja selle kohta on avaldatud teade Eesti standardiorganisatsiooni ametlikus väljaandes. Standard on kättesaadav Eesti standardiorganisatsioonist. This Estonian standard EVS-EN ISO 404:2000 consists of the English text of the European standard EN ISO 404:2000. This document is endorsed on 18.12.2000 with the notification being published in the official publication of the Estonian national standardisation organisation. The standard is available from Estonian standardisation organisation. Käsitlusala: Standard esitab nõuded vaigul põhinevatele taastusmaterjalidele, mis on hangitud kujul, mis on sobiv mehaaniliseks kokkusegamiseks, käsitsi segamiseks või välise energia rakendamisel ning mis on mõeldud kasutamiseks eelkõige III, IV ja V klassi kaviteetide vahetul parandamisel, s.t. klassi B materjalidele (vt. jaotis 3). Scope: ICS 11.060.10 Võtmesõnad: hambaravimaterjalid, märgistus, pakkimine, stomatoloogia, tehnilised andmed, testimine, vaigud Standardite reprodutseerimis- ja levitamisõigus kuulub Eesti Standardikeskusele
EN ISO 404 July 2000 ICS 11.060.10 Supersedes EN 2404 : 13. English version Dentistry Polymer-based filling, restorative and luting materials (ISO 404 : 2000) Art dentaire Produits d obturation, de restauration et de scellement à base de polymères (ISO 404 : 2000) Zahnheilkunde Füllungs-, restaurative und Befestigungskunststoffe (ISO 404 : 2000) This European Standard was approved by CEN on 2000-07-12. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-100 Brussels 2000. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN ISO 404 : 2000 E
Page 2 EN ISO 404 : 2000 Foreword International Standard ISO 404 : 2000 Dentistry Polymer-based filling, restorative and luting materials, which was prepared by ISO/TC 106 Dentistry of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC Dentistry, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by January 2001 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 404 : 2000 was approved by CEN as a European Standard without any modification. 2 3 4 4 4 7 7 7 8 8 8 12 14 14 16 17 18 21 24 2 27 27 27 28 2
Page 3 EN ISO 404 : 2000
Page 4 EN ISO 404 : 2000