Welcome 3 Unpacking 3 Before Use 3 Safety Instruction 4 Operation 5 Features 5 Front Panel 6 Rear Panel 7 RACK Connection 8 Block Diagram 9 Specification 10 Service and Warranty 11 2 ICS-8103
Welcome you from management and staffs of INKEL PA. All of the staffs here at INKEL PA have dedicated to provide excellent products of value, and we are glad that you have purchased one of our products. We sincerely trust that this product will provide satisfactory service, but if anything goes up you do not satisfy completely, we will endeavor to make things right. Welcome to INKEL PA and thank you for joining our worldwide family. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR BACK) NO USER SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the products. WARNING : TO PREVENT FIRE OF ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE Please inspect all equipment carefully right after unpacking. If you find any damages, contact your supplier or dealer immediately. Only a shipper may file a damage claim as a carrier for damages which have been incurred during shipping. Be sure to keep carton boxes and other all packing materials for the carrier s inspection. If your packing materials are in good condition, please keep them. If you ever need to return the unit to INKEL PA or an authorized service center, you should use only the original factory packing. To insure proper use of this product, please read owner s manual carefully and keep this manual in an easily accessible place for future reference. ICS-8103 3
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For propertreatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste diposal service or the point of sale where you purchased the items. Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of diposal. Note for the battery symbol (bottom two symbol examples): The sign Pb below the symbol for batteries indicates that this batteries contains lead. 4 ICS-8103
1. Be sure that siren switch is placed in OFF position. 2. Check the operation statue by switching on the proper siren. Chime will be operated while LED is illuminated by switching on the desired function among of tones. * VARIOUS USE (FOUR KINDS OF CHIME AND TWO SIRENS) Various uses with equipped four kinds of chime and flatness and wave sirens. * VARIOUS TONES OF CHIME Two and four chime and west minister which is available as signal song when broadcasting starts and ends. * TWO KINDS OF SIREN Available to use as alarms for emergency or various activities with selectable flatness and wave siren. * REMOTE CONTROL Able to operate this device by connecting to emergency broadcasting equipment or remote switch. ICS-8103 5
1. CHIME SWITCH If press the switch, then chime activates once while LED is illuminated. Variable choices among of four types that two tones, four tones chime up, four tones chime down, west minster. * Two tone (door bell type), four tone ascending, four tone descending 2. FLATNESS AND WAVE SIREN Available to use for emergency siren or other various activities with selectable two tones (flatness and wave). LED is always illuminated during operation. * ~ : Oscillating siren tone : Steady siren tone 3. SIREN STOP SWITCH Siren stops by pressing the stop switch. Place this switch in OFF position when do not use. 6 ICS-8103
1. DC POWER INPUT TERMINAL (+24V) This is a terminal to connect DC power (DC +24V). Ensure +, - polarity when you connect. 2. DC POWER OUTPUT TERMINAL This is a DC power output terminal (DC +24V) and it is connected with DC input terminal of external device. (EMERGENCY MODEL) 3. OUTPUT JACK This is an output jack of this unit and it is connected with PRIORITY INPUT of pre amplifier. (our model: IPP-8213) 4. REMOTE CONTROL CHIME SWITCH This is a terminal to use when you want to operate a chime of this unit from a distance. Select the proper chime terminal among of four types. ICS-8103 7
RACK Connection Signal Line Connection Line Source input(aux&mic) Microphone Line Input Source Input (CD, Deck, Tuner) 8 ICS-8103
ICS-8103 9
ELECTRICAL Chime & Siren Output Level/Impedance Siren Frequency Operation Temperature Storage Temperature 1V/10K, Unbalanced 630Hz -10 ~ +40-20 ~ +60 GENERAL Power Source Weight Dimension DC 24V 3kg 482(W) 44(H) 285(D)mm Specifications and design are subject to change without notice. 10 ICS-8103
TO PURCHASE ADDITIONAL INKEL PA. GEAR AND ACCESSORIES To purchase INKEL PA gear and optional accessories, contact any authorized INKEL PA distributor. For a list of INKEL PA distributors please visit our website at www.inkelpa.com. SERVICE AND REPAIR For replacement parts, service and repairs please contact the INKEL PA distributor in your country. INKEL PA does not release service manuals to consumers, and advice users to not attempt any self repairs, as doing so voids all warranties. You can locate a dealer near you at www.inkelpa.com. WARRANTY INFORMATION Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions of warranty for a given product may be determined first by locating the appropriate country which the product was purchased in, then by locating the product type. To obtain specific warranty information and available service locations contact INKEL PA directly or the authorized INKEL PA distributor for your specific country or region. CUSTOMER SERVICE AND TECHNICAL SUPPORT We encourage you to visit our online help and support at http://www.inkelpa.com. There you can find answers to frequently asked questions, tech tips, downloads, returns instruction and other helpful information. We make every effort to answer your questions within one business day. ICS-8103 11