INTRODUCTION Our highly successful Graduate range has been a mainstay in the Dextra Lighting product range for many years with installations in schools, hospitals and a wide range of other applications across the country. In line with our policy of constant product development we are pleased to relaunch this product in a new LED variant offering the benefits of excellent energy efficiency and low maintenance. Our Graduate LED has been designed to incorporate an optional integral microwave sensor offering presence detection and bright out control further increasing the energy savings that can be achieved, reducing your carbon footprint and improving return on investment. This LED lighting solution is ideal for retrofit applications, allowing sensor control without the cost associated of modifying external wiring. Alternatively the Graduate LED can also be offered with a range of standalone sensors such as our Reacta 44 offering presence detection, fully dimmable daylight regulation and remote control programming function. To strengthen this product range we are able to offer the Graduate LED with switch dimming, analogue dimming or DALI (digital addressable lighting interface) dimming functions as well as white tunable. Emergency options are available in standard, self test and autotest ensuring that we can offer this product range to suit all your requirements. The Graduate LED offers an attractive solution for classroom lighting, academia and health care as well as a wide range of other applications such a corridors, stairways and suspended installations. APPLICATION Canteen T: 01747 858100 E: sales@dextralighting.co.uk Page 1 of 11
Commercial/Offices Corridor Education Food/Clean Area Healthcare/Social Housing Hotel/Leisure Industrial/Manufacturing Retail Stairwell Store Room Transport Warehouse/Storage SPECIFICATION Construction Steel housing powder painted white. Robust diffuser with screw retained end caps to help protect against the rigors of school environments. Integral gear tray ensures minimal visibility of components when lit and allows for simple installation and maintenance. High efficiency opal polycarbonate diffuser unique to Dextra allows optimum light output ratio whilst ensuring excellent diffusion of the LED source. Performance Available in 1200mm and 1500mm variants with a range of lumen outputs from 1693llm to 10,296llm luminaire lumen. Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours. Philips Lumileds LM80 verified: B10 10% of LED s will exceed 10% lumen depreciation at 60,000 operating hours. Standard Deviation Colour Match 3 Step Macadam s Ellipse. L2 Compliant* *Specific variants only Control HFR High Frequency Analogue Dimming* SD(E) Switch Dimming. DSI(X) Digital addressable lighting interface. DSI Digital Dimming* CF(E) Corridor Function Dimming* WT White Tunable, Lumen outputs vary, please contact our sales department for details. *Not available in all variants T: 01747 858100 E: sales@dextralighting.co.uk Page 2 of 11
Emergency All variants can be offered with integral three hour emergency, Standard, Self test or Autotest. Installation Fully assembled and ready to install, no requirement for on site assembly. Removable gear tray allows for simple installation and maintenance. Variations Wide range of lumen outputs in 1200mm and 1500mm body lengths Integral microwave sensor for bright out and presence detection Dimming and emergency options IMAGES Product Images Project Images T: 01747 858100 E: sales@dextralighting.co.uk Page 3 of 11
T: 01747 858100 E: sales@dextralighting.co.uk Page 4 of 11
T: 01747 858100 E: sales@dextralighting.co.uk Page 5 of 11
T: 01747 858100 E: sales@dextralighting.co.uk Page 6 of 11
TECHNICAL GRADUATE 4FT GRADUATE 5FT GRADUATE 6FT WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. T: 01747 858100 E: sales@dextralighting.co.uk Page 7 of 11
Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a three year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on 01747 858100. *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire Codes Code Description Circuit Wattage Llm/w GRD L22 OPTPA Graduate Led, 600mm, 1693 Lumen, Opal Polycarbonate Diffuser, Colour 84 15.6w 108 GRD L26 OPTPA* Graduate Led, 1200mm, 2056 Lumen, Opal Polycarbonate Diffuser, Colour 84 17.2w 119 GRD L38 OPTPA* Graduate Led, 1200mm, 3026 Lumen, Opal Polycarbonate Diffuser, Colour 84 25.1w 120 GRD L87 OPTPA Graduate Led, 1200mm, 6811 Lumen, Opal Polycarbonate Diffuser, Colour 84 54.1w 126 GRD L35 OPTPA* Graduate Led, 1500mm, 2752 Lumen, Opal Polycarbonate Diffuser, Colour 84 22.8w 121 GRD L45 OPTPA* Graduate Led, 1500mm, 3520 Lumen, Opal Polycarbonate Diffuser, Colour 84 30.2w 116 GRD L54 OPTPA* Graduate Led, 1500mm, 4242 Lumen, Opal Polycarbonate Diffuser, Colour 84 34.1w 124 GRD L63 OPTPA Graduate Led, 1500mm, 4953 Lumen, Opal Polycarbonate Diffuser, Colour 84 40.3w 123 GRD L96 OPTPA Graduate Led, 1500mm, 7494 Lumen, Opal Polycarbonate Diffuser, Colour 84 66.8w 112 GRD L132 OPTPA Graduate Led, 1500mm, 10296 Lumen, Opal Polycarbonate Diffuser, Colour 84 78.5w 131 GRD L90 OPTPA 6FT Graduate Led, 1800mm, 7137 Lumen, Opal Polycarbonate Diffuser, Colour 84 61.8w 115 GRD L45 OPTPA 6FT Graduate Led, 1800mm, 3582 Lumen, Opal Polycarbonate Diffuser, Colour 84 27.6w 130 C83 option available on special request with specific lumen outputs. *Compliant with BSEN 12464 3000 candela limit. T: 01747 858100 E: sales@dextralighting.co.uk Page 8 of 11
Dimming Options Code Description H High Frequency Dimming (Analogue 1-10v) S Switch Dimming A Digital Addressable Lighting Interface (DALI) D* Digital Dimming (DSI) C* Bi-Level Dimming WT White Tunable, Lumen outputs vary, please contact our sales department for details Please click here for full details on our white tunable offer *Not available for L26 and L96 versions. Lighting Control Code Description R25E Reacta 25, On / Off High Frequency R25C* Reacta 25, Corridor Mode R25W Reacta-Wave, Wireless Linked sensor RLI Dextra Reacta-Link System STR Reacta Link Emergency Please click here for full details on our wireless controls. *Will only dim the luminaire to 10% during absence and brightout, it will not turn the luminaire off. Should a Clear Prismatic TPA Option be required, please refer to the Sales Team Emergency Code Description E3 3 Hour Integral Emergency ST3 Self Test AT3 Autotest Emergency Miscellaneous Code Description GRD IP40 Gasket IP40 Gasket P410 ELITE Four point suspension kit NL Night Light Night light available on request, we recommend the use of Corridor Function dimming in most nightlight applications, however a separate source can be supplied for our highest lumen output variants.
Graduate LED Linear Installation WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. 230-240V / 50-60Hz IP20 IK00 1 Remove the endcaps from the fitting by unscrewing retained screws. 2 Unhook diffuser from luminaire housing by gently squeezing the diffuser along its length. Remove diffuser and set to one side. 3 4 Loosen screws in the gear tray. Slide gear tray to one end to remove. 5 6 The body has the facility to be either direct mounted (to comply with Fmarking ensure the bumperfeet are not removed) or besa mounted. Refer to full fixings drawing at the end of this docment. DIL490008_B Once body is fixed in place, hook the edge of the gear tray over the inside housing edge and allow to hang. 20/06/17
Graduate LED Linear Installation 7 8 With the gear tray suspended, feed mains cable in through the rear of the body. 9 Wire mains cable(s) into marked terminals as required. 10 Reverse steps 1-5 to replace the gear tray, diffuser and end caps. Ensure that the small white cover caps (supplied) are placed on the end cap screw heads. 11 12 If supplied with Philips Trustsight emergency gear please see table for LED indications. DIL490008_B 20/06/17