dsorption ir Dryers DS to Clean and dry air. Prevent the risks, enjoy the benefits. V PRTERSIP SERVICE TECOOG OU C TRUST REI SIMPIC
V PRTERSIP SERVICE TECOOG OU C TRUST REI DS dsorption Dryers compressor takes humidity from the intake air which turns into condensate during the compression process. This will cause wear and corrosion to the downstream equipment, with potential costly interruption to production, and reduction in the efficiency and service life of the equipment used. dsorption dryers provide a solution to prevent this negative impact. SIMPIC User benefits Boost quality and productivity - Eliminate any residual water from the net for guaranteed clean compressed air - Ensure your air network is protected against rust avoiding leakages - igher final product quality - Increase your overall productivity Save costs - Prolong the life span of your operation process (machine/equipment...) - Reduce potential downtime - Energy management solution available to minimise energy consumption Easy operation and installation - Compatible with any compressor technology - User-friendly communication display providing air quality indication and maintenance requirements - Ready to install, with an integrated filtration solution (DS - 0) - Compact equipment fits in a minimum space The Ceccato DS adsorption dryers will eliminate water vapour that may potentially condensate in your compressed air system and cause damage. These dryers use an adsorption material called desiccant in order to absorb and remove (by regeneration phase) the humidity from the compressed air. ith this method we can reach a PDP < C ( -0 C. or -0 C.). This range should also be used when the ambient temperature goes below freezing point, to avoid ice building in pipes and applications. The DS range is typically used in the chemical, food and pharmaceutical industry and whenever a PDP < C is requested. dsorption removes the remaining moisture content in the air that will condense out even downstream of a refrigerant dryer. Its technology simulates a temperature reduction down to -0 C to -0 C by attracting and retaining moisture with the desiccant media (moisture freezes at + C actual temperature reduction) to condense out the very last water content in the air. The moisture is removed from the air flow to your network and released. dsorption dryers are recommended for the most demanding applications, where no moisture contamination can be accepted. Standard features and options Risks to avoid umid, unclean air can cause: - dirty air network increases leakage risk - igh maintenance cost of your air network (corrosion), operation process and potential downtime - Shorten the life span of your operation process (machine/equipment) - Risk of water contamination in the air network, with potential freezing in winter time - ower quality of the final product causing potential risk of product recalls - Reduced productivity Standard features and options DS - 0 DS 0-0 DS 0 - Capacity at bar (- 0 C) - 0 l/ 0-00 l/ 000-00 l/ Dew point Standard -0 C Standard -0 C Standard -0 C Maximum working pressure bar, bar and, bar orking pressure range - bar -, bar Voltages Easy installation - V - DC 0/0z 00 - - 0V - C 0/0z Multiport inlet and - 0 V - C 0/0z Forklift slot - bar & -, bar 0 V - C 0/0z Forklift slots Dew point sensor Dew point -0 C = available = not available By derating the air capacity (-0 C as an option together with derating the air capacity)
V PR DS 0 - RGE Compact execution Control dewpoint as option (CD) Electric timer control (STD) Control dew point (CD) Reliable operation with standard components tested for continuous service. The compact dryer can be installed on the floor (floor mounted kit as standard). The inlet prefilter and the postfilter FPRE, have to be mounted on the air distribution line. The filters are included but not pre-mounted. Developed with high quality components. DS dryers guarantee a stable dew point of -0 C. The use of an optimised desiccant volume and a wide vessel ensure a low air speed and a longer contact time. Purge phases are controlled by an electronic timer on the standard models (DS / STD). Max. orking There is also a dew point control version (DS / CD) where the drying phase is dew point dependent and is controlled by our electronic dew point management system. The two inlet prefilters FMO - and the postfilter FPRE have to be mounted on the air distribution line. The filters are included but not pre-mounted. liquids from the air sytem. Removable front panel allows for easy access for servicing without disconnecting the pipe system. Stainless steel purge nozzle. Postfilters, integrated in the dryer, removes particulate in the air stream. Electronic control housed in an IP box which enables: Base frame makes it easy to transport by fork lift. gauge - tower. gauge - tower B. Prefilter removes particulates and coalesced - regeneration cycle management - regulation status - default diagnosis - remote default report ir connection. igh efficiency silencers with integrated safety valve. ide vessels for optimum air spread and reliable drying. ir connection. Robust frame, including fork lift slots for easy installation. dew point sensor dew point digital display Two manometers integrated in the control panel to show pressure in the two vessels. psi l/ DS,0 DS,0 0 DS,0 0-0 0 DS,0, -0 0 DS,0 0, -0 DS 0,0 0, -0 DS 0, 0,0 0, DS, 0,0 00 DS, 0,0 00 DS, 0,0 cfm C, -0-0 eight Gas kg / 0 / / 0 0 / 0 0 / 0-0 0 FPRE 0 0, -0 0 FPRE 0 0, -0 FPRE 0 00-0 FPRE 0, 0 Post filters / Pre filters IC Dimensions m/h 0 Integrated in the dryer Galvanized piping with flanged connections. DS, 0,0 00 0-0 0 FPRE 0 0 DS, 0,0 00-0 0 FPRE 0 0 igh efficiency silencers with integrated safety valve. DS 0, 0,0 00-0 FPRE 0 DS 0, 0,0 00-0 FPRE 0 0 DS, 0,0 00-0 FPRE ½ 0 0 0 Inlet valves, long service interval. DS 0, 0,0 00 0-0 0 FPRE 0 ½ 0 0 0,0 000-0, 0, 00-0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 0 00 FMO 0 0 FPRE 0 00 0 DS 0 DS 0 DS 0 DS,0 00-0, 0, 00-0,0 000 00-0, 0, 00-0,0 00-0, 0, 00-0 Reference conditions: Operating pressure: see the technical data table / Operating temperature: C / Relative humidity: 00% Filters are delivered loose with the dryer: DS -0: the filters can be directly fixed on the dryer. DS 0-: the filters have to be mounted on the air distribution line. For conditions differing from the reference conditions, use the below correction factor table. MUTIPORT IET D OUTET Inlet / Connections FPRE µm mg/mc SI M P Purge nozzle for regeneration. 0,0 µm 0,0 mg/mc IP Dew point sensor. FMO 0, µm 0, mg/mc d Standard Dew Point ir Treatment Capacity Type Operating S TIS RRGEMET ESURES ES D FST ISTTIO 0 ir Inlet - bar DS/, or bar (max. working pressure) 0, DS - DS 0 0, 0, 0,,,,,,,,,, DS 0 - DS 0 0, 0, 0,,,,,,,,, 0,, 0, 0, 0,,,,, 0,,0,, 0 0 0 0-0 -0,0,0,0 0, 0, 0, 0, 0, 0, 0, pplications for DS - ir Inlet - bar DS 0 - DS ow to decrease your energy consumption? The electronic Dew Point control (CD) extends the drying phase of the dryer s cycle. It is done by measuring PDP of compressed air on the dryer and only switching the columns when desiccant in the active tower is saturated. The regeneration part of the cycle stays fixed. s most of the time compressor and dryer runs < 00% load, this results in a significant extension of the drying time and a reduction in purge air consumption. Typically the extra investment in a Dew Point control is paid back in a few months by savings made on dryer running costs. DS/ bar (max. working pressure) DS/, bar (max. working pressure) DS - DS 0 DS 0 - DS eight luminium head, base and cylinders prevent corrosion. Easy to maintain: - Maintenance operations can be performed without disconnecting tubing. - dsorbent cartridge with built-in postfilter. utomatic electronic control to manage the dryer and phase status with an automatic fault diagnosis, including alarms. Each tower is fitted with a high efficiency silencer for quiet operation. T DS 0-0 STD RGE Versatile installation with multiport system and six possible connections. Compact, reduced footprint, simple design. This module can be installed horizontally or vertically, can stand on the floor or be mounted on a wall (optional mounting kit available). The inlet prefilter is delivered loose with the dryer but it can be directly fixed on it. The postfilters FPRE are integrated in the desiccant cartridges. ER Technical data DS - 0 STD RGE OG O TEC OU C T S U TR DSORPTIO DRERS DS - REI Perfectly clean and dry air system with a clever dew point management Energy efficient and solid performance T compact quality air solution for easy installation and maintenance SERVICE I DS - DS id th ength
V PR DS 0 - RGE Compact execution Control dewpoint as option (CD) Electric timer control (STD) Control dew point (CD) Reliable operation with standard components tested for continuous service. The compact dryer can be installed on the floor (floor mounted kit as standard). The inlet prefilter and the postfilter FPRE, have to be mounted on the air distribution line. The filters are included but not pre-mounted. Developed with high quality components. DS dryers guarantee a stable dew point of -0 C. The use of an optimised desiccant volume and a wide vessel ensure a low air speed and a longer contact time. Purge phases are controlled by an electronic timer on the standard models (DS / STD). Max. orking There is also a dew point control version (DS / CD) where the drying phase is dew point dependent and is controlled by our electronic dew point management system. The two inlet prefilters FMO - and the postfilter FPRE have to be mounted on the air distribution line. The filters are included but not pre-mounted. liquids from the air sytem. Removable front panel allows for easy access for servicing without disconnecting the pipe system. Stainless steel purge nozzle. Postfilters, integrated in the dryer, removes particulate in the air stream. Electronic control housed in an IP box which enables: Base frame makes it easy to transport by fork lift. gauge - tower. gauge - tower B. Prefilter removes particulates and coalesced - regeneration cycle management - regulation status - default diagnosis - remote default report ir connection. igh efficiency silencers with integrated safety valve. ide vessels for optimum air spread and reliable drying. ir connection. Robust frame, including fork lift slots for easy installation. dew point sensor dew point digital display Two manometers integrated in the control panel to show pressure in the two vessels. psi l/ DS,0 DS,0 0 DS,0 0-0 0 DS,0, -0 0 DS,0 0, -0 DS 0,0 0, -0 DS 0, 0,0 0, DS, 0,0 00 DS, 0,0 00 DS, 0,0 cfm C, -0-0 eight Gas kg / 0 / / 0 0 / 0 0 / 0-0 0 FPRE 0 0, -0 0 FPRE 0 0, -0 FPRE 0 00-0 FPRE 0, 0 Post filters / Pre filters IC Dimensions m/h 0 Integrated in the dryer Galvanized piping with flanged connections. DS, 0,0 00 0-0 0 FPRE 0 0 DS, 0,0 00-0 0 FPRE 0 0 igh efficiency silencers with integrated safety valve. DS 0, 0,0 00-0 FPRE 0 DS 0, 0,0 00-0 FPRE 0 0 DS, 0,0 00-0 FPRE ½ 0 0 0 Inlet valves, long service interval. DS 0, 0,0 00 0-0 0 FPRE 0 ½ 0 0 0,0 000-0, 0, 00-0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 0 00 FMO 0 0 FPRE 0 00 0 DS 0 DS 0 DS 0 DS,0 00-0, 0, 00-0,0 000 00-0, 0, 00-0,0 00-0, 0, 00-0 Reference conditions: Operating pressure: see the technical data table / Operating temperature: C / Relative humidity: 00% Filters are delivered loose with the dryer: DS -0: the filters can be directly fixed on the dryer. DS 0-: the filters have to be mounted on the air distribution line. For conditions differing from the reference conditions, use the below correction factor table. MUTIPORT IET D OUTET Inlet / Connections FPRE µm mg/mc SI M P Purge nozzle for regeneration. 0,0 µm 0,0 mg/mc IP Dew point sensor. FMO 0, µm 0, mg/mc d Standard Dew Point ir Treatment Capacity Type Operating S TIS RRGEMET ESURES ES D FST ISTTIO 0 ir Inlet - bar DS/, or bar (max. working pressure) 0, DS - DS 0 0, 0, 0,,,,,,,,,, DS 0 - DS 0 0, 0, 0,,,,,,,,, 0,, 0, 0, 0,,,,, 0,,0,, 0 0 0 0-0 -0,0,0,0 0, 0, 0, 0, 0, 0, 0, pplications for DS - ir Inlet - bar DS 0 - DS ow to decrease your energy consumption? The electronic Dew Point control (CD) extends the drying phase of the dryer s cycle. It is done by measuring PDP of compressed air on the dryer and only switching the columns when desiccant in the active tower is saturated. The regeneration part of the cycle stays fixed. s most of the time compressor and dryer runs < 00% load, this results in a significant extension of the drying time and a reduction in purge air consumption. Typically the extra investment in a Dew Point control is paid back in a few months by savings made on dryer running costs. DS/ bar (max. working pressure) DS/, bar (max. working pressure) DS - DS 0 DS 0 - DS eight luminium head, base and cylinders prevent corrosion. Easy to maintain: - Maintenance operations can be performed without disconnecting tubing. - dsorbent cartridge with built-in postfilter. utomatic electronic control to manage the dryer and phase status with an automatic fault diagnosis, including alarms. Each tower is fitted with a high efficiency silencer for quiet operation. T DS 0-0 STD RGE Versatile installation with multiport system and six possible connections. Compact, reduced footprint, simple design. This module can be installed horizontally or vertically, can stand on the floor or be mounted on a wall (optional mounting kit available). The inlet prefilter is delivered loose with the dryer but it can be directly fixed on it. The postfilters FPRE are integrated in the desiccant cartridges. ER Technical data DS - 0 STD RGE OG O TEC OU C T S U TR DSORPTIO DRERS DS - REI Perfectly clean and dry air system with a clever dew point management Energy efficient and solid performance T compact quality air solution for easy installation and maintenance SERVICE I DS - DS id th ength
V PR DS 0 - RGE Compact execution Control dewpoint as option (CD) Electric timer control (STD) Control dew point (CD) Reliable operation with standard components tested for continuous service. The compact dryer can be installed on the floor (floor mounted kit as standard). The inlet prefilter and the postfilter FPRE, have to be mounted on the air distribution line. The filters are included but not pre-mounted. Developed with high quality components. DS dryers guarantee a stable dew point of -0 C. The use of an optimised desiccant volume and a wide vessel ensure a low air speed and a longer contact time. Purge phases are controlled by an electronic timer on the standard models (DS / STD). Max. orking There is also a dew point control version (DS / CD) where the drying phase is dew point dependent and is controlled by our electronic dew point management system. The two inlet prefilters FMO - and the postfilter FPRE have to be mounted on the air distribution line. The filters are included but not pre-mounted. liquids from the air sytem. Removable front panel allows for easy access for servicing without disconnecting the pipe system. Stainless steel purge nozzle. Postfilters, integrated in the dryer, removes particulate in the air stream. Electronic control housed in an IP box which enables: Base frame makes it easy to transport by fork lift. gauge - tower. gauge - tower B. Prefilter removes particulates and coalesced - regeneration cycle management - regulation status - default diagnosis - remote default report ir connection. igh efficiency silencers with integrated safety valve. ide vessels for optimum air spread and reliable drying. ir connection. Robust frame, including fork lift slots for easy installation. dew point sensor dew point digital display Two manometers integrated in the control panel to show pressure in the two vessels. psi l/ DS,0 DS,0 0 DS,0 0-0 0 DS,0, -0 0 DS,0 0, -0 DS 0,0 0, -0 DS 0, 0,0 0, DS, 0,0 00 DS, 0,0 00 DS, 0,0 cfm C, -0-0 eight Gas kg / 0 / / 0 0 / 0 0 / 0-0 0 FPRE 0 0, -0 0 FPRE 0 0, -0 FPRE 0 00-0 FPRE 0, 0 Post filters / Pre filters IC Dimensions m/h 0 Integrated in the dryer Galvanized piping with flanged connections. DS, 0,0 00 0-0 0 FPRE 0 0 DS, 0,0 00-0 0 FPRE 0 0 igh efficiency silencers with integrated safety valve. DS 0, 0,0 00-0 FPRE 0 DS 0, 0,0 00-0 FPRE 0 0 DS, 0,0 00-0 FPRE ½ 0 0 0 Inlet valves, long service interval. DS 0, 0,0 00 0-0 0 FPRE 0 ½ 0 0 0,0 000-0, 0, 00-0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 0 00 FMO 0 0 FPRE 0 00 0 DS 0 DS 0 DS 0 DS,0 00-0, 0, 00-0,0 000 00-0, 0, 00-0,0 00-0, 0, 00-0 Reference conditions: Operating pressure: see the technical data table / Operating temperature: C / Relative humidity: 00% Filters are delivered loose with the dryer: DS -0: the filters can be directly fixed on the dryer. DS 0-: the filters have to be mounted on the air distribution line. For conditions differing from the reference conditions, use the below correction factor table. MUTIPORT IET D OUTET Inlet / Connections FPRE µm mg/mc SI M P Purge nozzle for regeneration. 0,0 µm 0,0 mg/mc IP Dew point sensor. FMO 0, µm 0, mg/mc d Standard Dew Point ir Treatment Capacity Type Operating S TIS RRGEMET ESURES ES D FST ISTTIO 0 ir Inlet - bar DS/, or bar (max. working pressure) 0, DS - DS 0 0, 0, 0,,,,,,,,,, DS 0 - DS 0 0, 0, 0,,,,,,,,, 0,, 0, 0, 0,,,,, 0,,0,, 0 0 0 0-0 -0,0,0,0 0, 0, 0, 0, 0, 0, 0, pplications for DS - ir Inlet - bar DS 0 - DS ow to decrease your energy consumption? The electronic Dew Point control (CD) extends the drying phase of the dryer s cycle. It is done by measuring PDP of compressed air on the dryer and only switching the columns when desiccant in the active tower is saturated. The regeneration part of the cycle stays fixed. s most of the time compressor and dryer runs < 00% load, this results in a significant extension of the drying time and a reduction in purge air consumption. Typically the extra investment in a Dew Point control is paid back in a few months by savings made on dryer running costs. DS/ bar (max. working pressure) DS/, bar (max. working pressure) DS - DS 0 DS 0 - DS eight luminium head, base and cylinders prevent corrosion. Easy to maintain: - Maintenance operations can be performed without disconnecting tubing. - dsorbent cartridge with built-in postfilter. utomatic electronic control to manage the dryer and phase status with an automatic fault diagnosis, including alarms. Each tower is fitted with a high efficiency silencer for quiet operation. T DS 0-0 STD RGE Versatile installation with multiport system and six possible connections. Compact, reduced footprint, simple design. This module can be installed horizontally or vertically, can stand on the floor or be mounted on a wall (optional mounting kit available). The inlet prefilter is delivered loose with the dryer but it can be directly fixed on it. The postfilters FPRE are integrated in the desiccant cartridges. ER Technical data DS - 0 STD RGE OG O TEC OU C T S U TR DSORPTIO DRERS DS - REI Perfectly clean and dry air system with a clever dew point management Energy efficient and solid performance T compact quality air solution for easy installation and maintenance SERVICE I DS - DS id th ength
V PR DS 0 - RGE Compact execution Control dewpoint as option (CD) Electric timer control (STD) Control dew point (CD) Reliable operation with standard components tested for continuous service. The compact dryer can be installed on the floor (floor mounted kit as standard). The inlet prefilter and the postfilter FPRE, have to be mounted on the air distribution line. The filters are included but not pre-mounted. Developed with high quality components. DS dryers guarantee a stable dew point of -0 C. The use of an optimised desiccant volume and a wide vessel ensure a low air speed and a longer contact time. Purge phases are controlled by an electronic timer on the standard models (DS / STD). Max. orking There is also a dew point control version (DS / CD) where the drying phase is dew point dependent and is controlled by our electronic dew point management system. The two inlet prefilters FMO - and the postfilter FPRE have to be mounted on the air distribution line. The filters are included but not pre-mounted. liquids from the air sytem. Removable front panel allows for easy access for servicing without disconnecting the pipe system. Stainless steel purge nozzle. Postfilters, integrated in the dryer, removes particulate in the air stream. Electronic control housed in an IP box which enables: Base frame makes it easy to transport by fork lift. gauge - tower. gauge - tower B. Prefilter removes particulates and coalesced - regeneration cycle management - regulation status - default diagnosis - remote default report ir connection. igh efficiency silencers with integrated safety valve. ide vessels for optimum air spread and reliable drying. ir connection. Robust frame, including fork lift slots for easy installation. dew point sensor dew point digital display Two manometers integrated in the control panel to show pressure in the two vessels. psi l/ DS,0 DS,0 0 DS,0 0-0 0 DS,0, -0 0 DS,0 0, -0 DS 0,0 0, -0 DS 0, 0,0 0, DS, 0,0 00 DS, 0,0 00 DS, 0,0 cfm C, -0-0 eight Gas kg / 0 / / 0 0 / 0 0 / 0-0 0 FPRE 0 0, -0 0 FPRE 0 0, -0 FPRE 0 00-0 FPRE 0, 0 Post filters / Pre filters IC Dimensions m/h 0 Integrated in the dryer Galvanized piping with flanged connections. DS, 0,0 00 0-0 0 FPRE 0 0 DS, 0,0 00-0 0 FPRE 0 0 igh efficiency silencers with integrated safety valve. DS 0, 0,0 00-0 FPRE 0 DS 0, 0,0 00-0 FPRE 0 0 DS, 0,0 00-0 FPRE ½ 0 0 0 Inlet valves, long service interval. DS 0, 0,0 00 0-0 0 FPRE 0 ½ 0 0 0,0 000-0, 0, 00-0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 ½ 00 0 0 FMO 0 0 FPRE 0 0 00 FMO 0 0 FPRE 0 00 0 DS 0 DS 0 DS 0 DS,0 00-0, 0, 00-0,0 000 00-0, 0, 00-0,0 00-0, 0, 00-0 Reference conditions: Operating pressure: see the technical data table / Operating temperature: C / Relative humidity: 00% Filters are delivered loose with the dryer: DS -0: the filters can be directly fixed on the dryer. DS 0-: the filters have to be mounted on the air distribution line. For conditions differing from the reference conditions, use the below correction factor table. MUTIPORT IET D OUTET Inlet / Connections FPRE µm mg/mc SI M P Purge nozzle for regeneration. 0,0 µm 0,0 mg/mc IP Dew point sensor. FMO 0, µm 0, mg/mc d Standard Dew Point ir Treatment Capacity Type Operating S TIS RRGEMET ESURES ES D FST ISTTIO 0 ir Inlet - bar DS/, or bar (max. working pressure) 0, DS - DS 0 0, 0, 0,,,,,,,,,, DS 0 - DS 0 0, 0, 0,,,,,,,,, 0,, 0, 0, 0,,,,, 0,,0,, 0 0 0 0-0 -0,0,0,0 0, 0, 0, 0, 0, 0, 0, pplications for DS - ir Inlet - bar DS 0 - DS ow to decrease your energy consumption? The electronic Dew Point control (CD) extends the drying phase of the dryer s cycle. It is done by measuring PDP of compressed air on the dryer and only switching the columns when desiccant in the active tower is saturated. The regeneration part of the cycle stays fixed. s most of the time compressor and dryer runs < 00% load, this results in a significant extension of the drying time and a reduction in purge air consumption. Typically the extra investment in a Dew Point control is paid back in a few months by savings made on dryer running costs. DS/ bar (max. working pressure) DS/, bar (max. working pressure) DS - DS 0 DS 0 - DS eight luminium head, base and cylinders prevent corrosion. Easy to maintain: - Maintenance operations can be performed without disconnecting tubing. - dsorbent cartridge with built-in postfilter. utomatic electronic control to manage the dryer and phase status with an automatic fault diagnosis, including alarms. Each tower is fitted with a high efficiency silencer for quiet operation. T DS 0-0 STD RGE Versatile installation with multiport system and six possible connections. Compact, reduced footprint, simple design. This module can be installed horizontally or vertically, can stand on the floor or be mounted on a wall (optional mounting kit available). The inlet prefilter is delivered loose with the dryer but it can be directly fixed on it. The postfilters FPRE are integrated in the desiccant cartridges. ER Technical data DS - 0 STD RGE OG O TEC OU C T S U TR DSORPTIO DRERS DS - REI Perfectly clean and dry air system with a clever dew point management Energy efficient and solid performance T compact quality air solution for easy installation and maintenance SERVICE I DS - DS id th ength
applications & drying process Residual oil pplication for DS dryer Particularly for: - The chemical and pharmaceutical Industries. - Petrochemical plants. - Food industry. - Transportation of hygroscopic materials. - Quality painting. - Textile production. - Semiconductors. - Cable pressurization. - Beer and drinks production. - pplications in low-temperature environments. -... and whenever a pressure dew point less than C is requested. -0 C (..)* aborotories Painting Cold zones Instruments Residual particles µm -0 C (..)* Very cold regions External installations Semiconductors 0,0 mg/m Food industries * Quality class according to ISO - The drying process Drying phase: inlet filter inlet valve silencers *FPRE et air from the compressors passes through the inlet filter () which removes the oil and enters into tower. The desiccant contained in it adsorbs the water vapor molecules. fter a fixed (STD) or variable time (CD) the inlet valve () deviates the airflow from tower to tower B and it becomes the operative tower. Regeneration phase: During the drying phase in the tower, some dry air is deviated into the top of tower B, extracting the trapped water vapor from the desiccant material. During this phase, tower B is open to the atmosphere, allowing the purge air to expand. The silencers () on the ensure quiet operation. P max atm. **FMO B P max atm. Pressurization phase: Once regeneration has taken place and tower B is pressurized, the inlet valve () changes air flow again. dsorbent material Unsaturated Saturated Inlet valve Discharge silencer Prefilters and Postfilter * On DS-0 filter is built inside of the desiccant cartridges. ** Recommended but not included on DS-0 umidity detector (CD)
V PRTERSIP SERVICE TECOOG OU C TRUST REI dsorption air dryers Range DS SIMPIC high quality product and technology you can trust Choosing our high performance compressor ensures your compressed air availability Our products are simple, easy to use and give strong reliability Serviceability and aftermarket are guaranteed Original Parts and Services Dealers are always nearby and complete the strong partnership you can expect Increases your profit and improve the image of your company Contact your local Ceccato representative now! 00 www.ceccato-compressors.com