EC Certificate Full Quality Assurance System

Similar documents
DNV BUSINESS ASSURANCE

Notified Body No.: 0575 G U A D N L. SJq

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

MED 96/98/EC QUALITY SYSTEM MODULE D CERTIFICATE

EC-CERTIFICATE (Full quality assurance system)

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Notified Body No.: 0575

EU Declaration of Conformity EMC Directive 2014/30/EU, ATEX Directive 2014/34/EU, PED Directive 2014/68/EU No: MMI SE

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

Notified Body No.: 0098

Certificate No. DNV-2009-OSL-ALARM This Certificate consists of 5 pages. This is to certify that the product PIR / DUAL TECHNOLOGY DETECTORS

Notified Body No.: 0575

MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Valve Manufacturers Association of America

1. Terms defined in the Construction Products Regulation (CPR)

Implementing the Construction Products Regulation (EU) 305/2011

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

Frequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry

The Danish Energy Authority to carry out inspections in June and July 2012

EUROPUMP ATEX Guideline Part II

European Regulations of Medical Devices and In-vitro Diagnostic Medical Devices. The Notified Body Point of View

Achieve Success with European Medical Device Commercialization. By Russ King

Lawnmowers, pedestrian controlled (combustion engine powered)

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems

The New EU-Regulation on Construction Products

Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories

Coatings for protection of FRP structures with heavy rain erosion loads

EU Declaration of Conformity

Shipboard incinerators with capacities up to 4000 kw

ETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products

Record of Amendments. Version Date Amendment Section/page affected

COMMISSION DELEGATED REGULATION (EU) /... of

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY

Lawnmowers (pedestrian controlled, battery powered)

EC-TYPE EXAMINATION CERTIFICATE (MODULE B)

Declaration of Conformity Declaration of Performance Notes

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

Role of CE Marking in the Placing on the Market of Electronic Components

Certificate of Conformity Product Certification Scheme type 5

Council Directive 93/68/EEC of 22 July 1993 amending Directives

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

Chain saws (electric mains powered and battery powered)

The New EMC Directive 2004/108/EC

Lawnmowers (pedestrian controlled electric mains-powered)

Regulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR

ROK-10 MÓDULO EXPANSOR BIDIRECCIONAL

SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)

New Requirements for Placing of Medical Devices on the Market: Conformity Assessment to the Technical Regulations

The Machinery Directive 2006/42/EC

COMMISSION DELEGATED REGULATION (EU)

The New EMC Directive 2004/108/EC

CE marking of noise barriers and foundations

INSTRUCTIONS FOR SAFE OPERATIONS LM3000 EXPLOSION PROOF LASER DISTANCE METER

European Technical Approval ETA-08/0035 This ETA replaces ETA-08/0035 with validity from till

SIMPLIFIED VOYAGE DATA RECORDER (S-VDR)

For compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.

The PPE Directive and the PPE Regulation

CE Marking and Technical Standardisation

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Brush cutters Grass Trimmers (combustion engine powered)

Technical Bulletin CE marking: from 1st July 2013

Record of Amendments. Version Date Amendment Section/page affected

USCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE

TRASCO ATEX Couplings

Lawn trimmers and lawn edge trimmers (hand held electric mains powered)

EC TYPE EXAMINATION (MODULE B) CERTIFICATE

Reporting Changes to your Notified Body

Single Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology M/327

ANNEX GD-CERT-EX-EN SIT

Issued to DISTRIBUIDORA INTERNACIONAL CARMEN, S.A -DICSA- Zaragoza Zaragoza, Spain

Guidelines for designating and monitoring notified bodies in Norway

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

Guideline Construction Products Regulation (EU) 305/20122

Regulation on the handling of explosives precursors

EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE

Response to request for review Destruction of HFC-23 at Refrigerant (HCFC-22) Manufacturing Facility of Chemplast Ltd. (0499)

Garden blowers, vacuums and blower/vacuums (electric mains powered)

EC TYPE EXAMINATION (MODULE B) CERTIFICATE

CE MARKING OF WOOD-BASED PANELS

GROUNDING AVOIDANCE SYSTEM (GAS)

JBCE input for the RoHS FAQ document

EUROPEAN UNION. Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 ENT 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481

TYPE APPROVAL CERTIFICATE

METALDRIVE ATEX Couplings

C e r t i f i c a t e Of Conformity No.: 0560-CPD /AA/05

CE MARKING PROCESS & NOTIFIED BODIES

Robotic Mowers (battery powered and charging station connected to electric mains or low voltage supply)

Certificate No PC-NOR-NA This Certificate consists of 6 pages. This is to certify that the product(s) Wireless Intrusion Alarm Equipment

Operating Instructions for Rotor flow Indicator. Model: DKF

DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Declaration of Conformity

REGULATION FOR THE CE CERTIFICATION ACCORDING TO THE MEDICAL DEVICES DIRECTIVE

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

Cylinder Mortice Dead lock Lockcase(mm) A=87 Backset (mm) B=55. Follower (mm) 8 Latch Bolt

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY

Want to know more about the Notified Body? Everything you need to know to help you through the Notified Body process and on to accreditation.

ei DG UV Test EC-Type Examination (Module B) Certificate Certificate No

COMMISSION DELEGATED REGULATION (EU) /... of

Transcription:

This is to certify that the quality system of: Omni Lens Pvt. Ltd. 5 - SAMRUDDHI, Opp. SAKAR III, Navarangpura, Ahmedabad, Gujarat, India-380014 For design, production and final product inspection/testing of: Sterile Intra Ocular Lenses & Accessories Has been assessed with respect to: The conformity assessment procedure described in Article 11.3.a and Annex II excluding section 4 (Module H2) of Council Directive 93/42/EEC on Medical Devices, as amended and found to comply. Further details of the product(s) and conditions for certification are given overleaf. Place and Date: Høvik, 18 September 2017 For: DNV GL NEMKO PRESAFE AS Tone Kolpus PROD 021 Notified Body No.: 2460 The Certificate has been digitally signed. See www.presafe.com/digital_signatures for more info Notice: The Certificate is subject to terms and conditions as set out in the Certification Agreement. Failure to comply may render this Certificate invalid. MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 1 of 6

Jurisdiction Application of Council Directive 93/42/EEC of 14 June 1993, adopted as Forskrift om Medisinsk Utstyr by the Norwegian Ministry of Health and Care Services. Certificate history: Revision Description Issue Date 0.0 Replace the certificate 1238-2012-CE-IND-NA rev. 3 (NB 0434) following the transfer of Notified Body functions to DNV GL NEMKO Presafe AS (NB 2460) at recertification 2017-09-18 Products covered by this Certificate: Product Name Product Description Class Single piece PMMA Intraocular Lenses (Raw material: PMMA, Yellow PMMA) Having combination of: Diameter: 12.00 mm to 13.50 mm (in 0.50 increment) Optic Type & Size (Spherical /Aspheric type optic with or without 360 square edge): 5.00 mm to 7.00 mm (in 0.25 increment) Brands: Omni, Intra, C-Thru, Innova, Innova Plus,Techno Instrument Lens Inner Packing: Lens case or Lens tray Outer packing: Single Pack or Multiple packing in lens tray Model/Design/Style: AC131 UV, AC132 UV, AC133 UV, AC134 UV, CB111 UV, CB122 UV, CB191 UV, CB192 UV, CB132 UV, CB133 UV, CB143 UV, CB144 UV,CB132 UV2, CB133 UV2, CB143 UV2, CB144 UV2, CB11-33 UV, CB11-33 UV2, CB191 UVSQ, CB132 UV2SQ, CB191UVSC2, CB122 UVSC2, CB132UVSC2, CB133UVSC2, CB143UVSC2, CB144UVSC2, SQ525, SQ550, SQ600, SQ650, SQSC600, SQSC525, YSQSC600, YSQSC525, YSQ525, YSQ550, YSQ600, YSQ650, UVAC60-120, UVAC60-125, UVAC60-130, UVAC60-135, UVC50-120, UVC50-125, UVC55-125,UVC525-120, UVC525-125, UVC60-125, UVC60-130, UVC65-130, UVC65-135, UVHC60-125, UVHC60-130, UVHC65-130, UVHC65-135, UVC5/6-130, UVHC5/6-130, UVSQC525-120, UVSQHC60-125, UVC600-125SC2, UVC525-120SC2, SQ600ASP,YSQ600ASP MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 2 of 6

Hydrophilic Acrylic Foldable Intraocular Lenses (Raw materials: HA 25% & HA 26% (Clear & Natural/Extended Yellow)) Having combination of: Diameter: 11.00 mm to 13.50 mm (in 0.50 increment) Optic Type & Size: (Spherical /Aspheric, Multifocal/ Diffractive Multifocal, Toric / Diffractive Toric type optic with or without 360 square edge): 5.00 mm to 7.00 mm (in 0.25 increment) Brands: Omni, Intra, C-Thru, Aquafold, Innova, Innova Plus, Innova Asp, GenNext, Revive, Axis, BIOL, Techno Instrument Lens Inner Packing: Vial, Blister, Holster, Semi preloaded, Preloaded or Multiple Outer packing: Single Pack, Combo pack Model/Design/Style: CBF31UVFL,CBF32FLEX,CBF32MFFLEX,CBF32UV,CBF32UV A,CBF32UVQ,CBF32UVFL,CBF32MFFL,CBF32UVASP,CBF32U VDFA,CBFY32UV,CBFY32UVA,CBFY32UVQ,CBFY32UVFL,CB F32UVFLASP,CBFY32MFFL,CBFY32UVASP,CBFY32UVDFA,C BF33UV,CBF33UVA,CBF33UVQ,CBF33UVFL,CBF33MFFL,CBF 33UVASP,CBF33UVDFA,CBFY33UV,CBFY33UVA,CBFY33UVQ,CBFY33UVFL,CBFY33MFFL,CBFY33UVASP,CBFY33UVDFA, CBF81UV,CBF81UVA,CBF81UVQ,CBF81UVFL,CBF81MFFL,C BF81UVASP,CBF81UVDFA,CBFY81UV,CBFY81UVA,CBFY81U VQ,CBFY81UVFL,CBFY81MFFL,CBFY81UVASP,CBFY81UVDF A,CBF82UVA,CBF82UVASP,CBF37UV,CBF37UVA,CBF37UVQ, CBF37UVFL,CBF37MFFL,CBF37UVASP,CBF37UVDFA,CBFY3 7UV,CBFY37UVA,CBFY37UVQ,CBFY37UVFL,CBFY37MFFL,C BFY37UVASP,CBFY37UVDFA, CBF33 SUVASP+, CBFY33SUVASP+, CBF32UVMCR,CBF33UVMCR,CBFY32UVMCR,CBFY33UVMC R, LBF33UVDF, PBF37UV,PBF37UVA,PBF37UVAQ,PBF37UVQ, PBF37UVFL,PBF37MFFL,PBF37UVASP,PBF37UVDFA,PBFY37 UV,PBFY37UVA,PBFY37UVQ,PBFY37UVFL,PBFY37MFFL,PBF Y37UVASP,PBFY37UVDFA,SQ600,SQA600,SQFL600,SQQ600, SQMFFL600,SQA600DF,SQA600MCR,YSQ600,YSQA600,YSQ FL600,YSQQ600,YSQMFFL600,YSQA600DF,YSQA600MCR, SQA575, SQFL575, SQQ575, SQMFFL575, YSQA575, YSQFL575, YSQQ575, YSQMFFL575, SQFL600ASP, SQA600ASP, SQQ600ASP,SQMFFL600ASP, YSQFL600ASP, YSQA600ASP, YSQQ600ASP,YSQMFFL600ASP, SQA600DF, SQFL600DF, SQQ600DF, YSQA600DF, YSQFL600DF, YSQQ600DF, SQA600MCR, YSQA600MCR, AY4, UVF575-120, UVF575-120FL, UVF575-120Q, UVF575-120MFFL, UVF575-125, UVF575-125FL, UVF575-125Q, UVF575-125MFFL, UVF600-110Q, UVF600-125A, UVF600-125FL, UVF600-125Q, UVF600-125MFFL, UVF600-130A, UVF600-130FL, UVF600-130Q, UVSQF600-125A, UVSQF600-125FL, UVSQF600-110Q, UVF600-130DFFL, UVF600-130DFA, UVF600-110DFQ, MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 3 of 6

UVF600-125DFFL, UVSQF600-125MCR CBF33UVT, CBF33UVT1 to CBF33UVT9, CBFY33UVT, CBFY33UVT1 to CBFY33UVT9, PBF37UVQT, PBF37UVQT1 to PBF37UVQT9, PBFY37UVQT, PBFY37UVQT1 TO PBFY37UVQT9,SQFL600T, SQFL600T1 to SQFL600T9, YSQFL600T, YSQFL600T1 to YSQFL600T9, SQQ600UVT,SQQ600UVT1 to SQQ600UVT9, YSQQ600UVT, YSQQ600UVT1 to YSQQ600UVT9, CBF32UVASP*+, PBF37UVASP*+, SQQ600MCR*+, YSQQ600MCR*+, TAY4, HAY4,M AY4, LDS AY4,CBF33SUVASP+, CBF35UVFL, SQQ600ASP*,CBF32UVFLASP*.,LBF33UVDF,PBF31UVQ,PBF 33UVQ,PBF35UVQ,PBF37UVAQ (EU), ASPHI6108, PBF41UVQ,PBF43UVQ, PBF45UVQ, PBF37UVQDFT#, CBF32UV26, CBF31UVFLASP*. ( * is added for HA26% material after each model) Hydrophobic Acrylic Foldable Intraocular Lenses (Raw material: Hydrophobic Acrylic - Clear & Natural Yellow) Having combination of: Diameter: 11.00 mm to 13.50 mm (in 0.50 increment) Optic Type & Size: (Spherical /Aspheric, Multifocal / Diffractive Multifocal, Toric / diffractive toric type optic with or without 360 square edge): 5.00 mm to 7.00 mm (in 0.25 increment) Brands: Acrivue, OMNI, Intra, C-Thru, Aquafold, Innova, Innova Plus, Innova Asp, GenNext, Revive, Axis, BIOL, Techno Instrument Lens Inner Packing: Lens case, Semi preloaded, Preloaded Outer packing: Single Pack, Combo pack Model/Design/Style: LBHF32 UV, LBHF33 UV, LBHF37 UV, LBHF38 UV, LBHY32 UV, LBHY33 UV, LBHY37 UV, LBHY38 UV, LBHF32 UVASP, LBHF33 UVASP, LBHF37 UVASP, LBHF38 UVASP, LBHY32 UVASP, LBHYO32UVASP,LBHY33 UVASP, LBHY37 UVASP, LBHYO37UVASP,LBHY38 UVASP, CBHF32 UVASP, CBHF33 UVASP,CLBHF37 UVASP,CBHF38 UVASP, CLBHY32 UVASP,CLBHY33 UVASP, CBHY37 UVASP,CLBHY38 UVASP,CLBHF32 UVASP,CLBHF33 UVASP,CBHF37 UVASP,CBHF38 UVASP,CBHY32 UVASP, CBHY33 UVASP,CBHY37 UVASP,CBHY38 UVASP, PBHF33UVASP, PBHF37UVASP, PBHY37UVASP,PBHF32UVASP,PBHY32UVASP,PBHYO32UVA SP,PBHYO37UVASP, LBHF32UVDF, LBHY32UVDF, LBHYO32UVDF, PBHF37UVDF, PBHY37UVDF, PBHYO37UVDF, FLHF32UVDF, FLHY32UVDF, HBHYO37UVASP,FLHF32UVASP, FLHY32UVASP,HAY4 H ANY4, MH ANY4. LBHY32UVT, LBHY32UVT1 TO LBHY32UVT9,LBHF32UVT, LBHF32UVT1 To LBHF32UVT9, BHY37UVQT,PBHY37UVQT1 TO PBHY37UVQT9,PBHF37UVQT, PBHF37UVQT1 to PBHF37UVQT9, TH ANY4, CBHF33UVT1 TO CBHF33UVT9,CSQHF60125L1, MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 4 of 6

Capsular Tension Ring Lens Delivery System CSQHF60125L1AP, YSQHF60125L1, YSQHF60125L1AP, YSQHF60125L1DF, CSQHF60125L1DF, YSQHF60110Q4AP, CSQHF60110Q4AP, YSQHF60110Q2AP, CSQHF60110Q2AP, YSQHF60125L1TR*, SQHF60125L1TR*, YSQHF60110Q2TR*, CSQHF60110Q2TR*, CSQHF60120Q4AP, CSQHF60130Q4AP, CSQHF60130C1AP, Raw material: PMMA, BLUE PMMA Brand Names: Omni, Intra Inner Packing: Lens case Outer packing: Single Pack Models: CTR 100, CTR 110, CTR 120, CTR 130, CTR 140, CTR150, CTR160, CTR 100BL, CTR 110BL, CTR 120BL, CTR 130BL, CTR 140BL, CTR150BL, CTR160BL IRING 10, IRING 11, IRING 12, IRING 13, IRING 14, IRING 15. IRING 16, IRING 10BL, IRING 11BL, IRING 12BL, IRING 13BL, IRING 14BL, IRING 15BL, IRING 16BL Brand Names: Aquaject (Cartridge & Cushion), Aquaject Plus (Cartridge, Cushion & Injector or Cartridge, Cushion, Injector and Lens Rolling System Part-2) Inner Packing: Paper Pouch, Blister Pack Outer packing: Single Pack,Combo Pack Models: Flyglide,Mini, Micro, Small, Monoglide, IM-WS-Y-Small, IM-WS-Y-Mini, IM-WS-Y-Flyglide, IM-WS-W-Micro, AQ-S-B- Small, AQ-S-B-Mini, AQ-S-B-Flyglide, SA-WS-B-Small. SA-WS- B-Mini, SA-WS-B-Flyglide, IM-WS-Y Monoglide, IM-WS-W- Mini,SA-S-B-Flyglide,SA-S-B-Small,AQ-S-B-Monoglide, AQ-S-B- Micro,SA-S-B-Small, SA-S-B-mini. AQ-S-W-Micro, AQ-S-B-MJ18, AQ-S-B-MJ20, AQ-S-B-MJ22, AQ-S-B-MJ24, AQ-S-B-MJ26, AQ- S-B-MJ28, AQ-S-B-RET20, AQ-S-B-RET22, AQ-S-B-RET24, AQ- S-B-RET26, AQ-S-B-CON18, AQ-S-B-CON20, AQ-S-B-CON22, AQ-S-B-CON24, AQ-S-B-CON26 IIa The complete list of devices is filed with the Notified Body MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 5 of 6

Sites covered by this certificate Site Name Omni Lens Pvt. Ltd. Address Registered office: 5 - SAMRUDDHI, Opp. SAKAR III, Navarangpura, Ahmedabad, Gujarat, India-380014 Factory: A-69 / A-70, Electronics Estate, GIDC, Sector 25, Gandhinagar, Gujarat, India EU Representative: Obelis S.A, Boulevard General Wahis 53, 1030 Brussels, BELGIUM. Email: mail@obelis.net Terms and conditions The certificate is subject to the following terms and conditions: Any producer (see 2001/95/EC for a precise definition) is liable for damage caused by a defect in his product(s), in accordance with directive 85/374/EEC, as amended, concerning liability of defective products. The certificate is only valid for the products and/or manufacturing premises listed above. The Manufacturer shall fulfil the obligations arising out of the quality system as approved and uphold it so that it remains adequate and efficient. The Manufacturer shall inform Presafe of any intended updating of the quality system and Presafe will assess the changes and decide if the certificate remains valid. Periodical audits will be held, in order to verify that the Manufacturer maintains and applies the quality system. Presafe reserves the right, on a spot basis or based on suspicion, to pay unannounced visits. The following may render this Certificate invalid: Changes in the quality system affecting production. Periodical audits not held within the allowed time window. Conformity declaration and marking of product When meeting with the terms and conditions above, the producer may draw up an EC declaration of conformity and legally affix the CE mark followed by the Notified Body identification number of Presafe. End of Certificate MSD-CO-078 DNV GL NEMKO PRESAFE AS - Veritasveien 3, N-1363 Høvik, Norway - Registered Enterprise No: NO 997 067 401 MVA Page 6 of 6