SC315 RECTANGULAR RAPID FLASHING BEACON MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Item 11-1 Solar Powered With Two Light Bars, 50 Watt Solar Panel, 35 Ahr Battery & Flasher Controller (Less Pushbutton, Pole, & Sign Face) Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT-10-043 - Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications. 1.844.412.8395 traffic@carmanah.com carmanahtraffic.com
SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location. 17.0 (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: 90-264 VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
SC315 RECTANGULAR RAPID FLASHING BEACON MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Item 11-2 Solar Powered With One Light Bar, 50 Watt Solar Panel, 35 AHr Battery And Flasher Controller (Less Pushbutton, Pole, & Sign Face) Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT-10-043 - Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications. 1.844.412.8395 traffic@carmanah.com carmanahtraffic.com
SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location. 17.0 (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: 90-264 VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
SC315 RECTANGULAR RAPID FLASHING BEACON Item 11-3 AC Powered With Two Light Bars And Flasher Controller (Less Pushbutton, Pole And Sign Face) MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT-10-043 - Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications. 1.844.412.8395 traffic@carmanah.com carmanahtraffic.com
SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location. 17.0 (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: 90-264 VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
SC315 RECTANGULAR RAPID FLASHING BEACON Item 11-4 AC Powered With One Light Bar And Flasher Controller (Less Pushbutton, Pole And Sign Face) MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT-10-043 - Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications. 1.844.412.8395 traffic@carmanah.com carmanahtraffic.com
SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location. 17.0 (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: 90-264 VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
Item 11-8 4 EVR Pedestrian Push Button Overview 4 EVR is digitally controlled and virtually vandal proof. Impact resistant from sticks, skateboards, baseball bats, hammers, and similar objects. The 4 EVR utilizes a piezo switch element that cannot be stuck in a constant call. An LED and audible tone provide the pedestrian with feedback that a call has been placed. Feedback options include: Latching LED and audible dee dah tone Momentary LED and audible dee dah tone No LED and Audible dee dah tone New Transient protection exceeds NEMA requirements. The actuator is pressure sensitive and uses no screws or bolts in the functioning areas. Latch Mode Configurations FEATURES Solid state piezo switch Pressure sensitive Actuator will not stick Virtually vandal proof LED and audible tone ADA and MUTCD compliant 5 year warranty Verisys Registrars ISO 9001:2008 Certified The 4 EVR can be configured with latching/momentary or no LED. In the latching mode the pilot light is lit when the call is placed and remains on until the walk display is energized. All pushbuttons on the phase are synchronized. Latching mode requires a PBI-L or PBIC-L. Push Button Isolator: Rack and Shelf PBI provides an isolated input circuit in a number of configurations including Latching or Momentary, 120 VAC or 24 VDC. The PBI mounts anywhere in the traffic cabinet. The PBIC fits into a 170 card file and replaces the existing isolator cards in the rack. One card manages up to four phases and 16 push buttons Campbell Company 450 W. McGregor Boise, ID 83705 208-345-7459 www.pedsafety.com
Visual Audible Latching Mode Tactile Feedback LED Super bright Red Dee 2300 Hz Dah 2000 Hz LED with PBI-L Optional tactile arrow Operating Temperature Operating Life Electrical Specifications Operating Voltage DC 18 24 VDC Operating Voltage AC 12 17 VAC On Resistance < 150 ohms Operating Mode Normally Open Closure Dwell 150 ms Maximum Terminal 1.5 V Voltage During Closure Switch Piezo electric, solid state switch Environmental Specifications -40 C to 85 C 300 x 10⁶ Operating Force Actuator size ADA Specifications < 3 lbf 2 inches ABOUT Campbell Company is the leading American manufacturer of pedestrian signal safety products, accessible pedestrian signals (APS) pedestrian push buttons, signs, and hardware. ADDITIONAL INFORMATION More information can be found at: www.pedsafety.com Bezel Actuator Hardware Finish Materials Aluminum Stainless Steel Stainless Steel Powder Coat Form Factor Round 3 OD 4 hole, 2 hole (9-3, 10-2) Rectangular 2.8 x 4.5 4 hole, 2 hole Oval 6.8 x 3.4 2 hole Color Black, Green, Yellow, Natural Warranty 5 Years Campbell Company 450 W. McGregor Boise, ID 83705 208-345-7459 www.pedsafety.com Design subject to change without notice.
Item 11-8 Description: Materials: Geometry:
Item 11-9 Item 11-10 OMUTCD Legend To Be Specified Upon Order
Item 11-11 Item 11-12 C D N M E F B J K L G * H A W16-7pL LEFT DIAGONAL ARROW PLAQUE C A B C D E F G H J K L M N 24 12.375.625 4.323 3 30 5.844 3.282 5.884 6.925.600 1.5 30 18.5.75 6.524 4.5 30 8.766 4.923 8.846 10.407.920 1.875 * W16-7pR RIGHT DIAGONAL ARROW PLAQUE *See page 6-2 for arrow design. COLORS: SYMBOL BLACK BACKGROUND YELLOW (RETROREFLECTIVE) 2-126
Item 11-13
Section 11: RRFB Sign Assembly Item 11-14 thru 11-18
Item 11-19
Item 11-19 Length: 14'
Item 11-19 6" - 12" Passed Threads