digital reote control WARRANTY 10 years for excanger
The Digital Reote Control unit. Installation flexibility: A can be installed on board the appliance; B can be installed away fro the appliance. Double teperature setting: day teperature. night teperature (lower night teperature). Large graphic display ensuring easier control and adjustent for the user. High precision: uses an NTC sensor that onitors iu variations in roo teperature. Thanks to the Digital Reote Control unit, it is possible to: regulate two roo teperature and therostat settings; set a different on/off progra for every day of the week; see in continuous sequence: inside and outside teperature; display all the operating paraeters. A B Cofort. The new chronotherostat and elegant huidifying tray provide and aintain constant teperature and ideal levels of huidity for a cofortable environent. Another cofort feature is represented by the possibility of disengaging the tangential fan ( Echo series). This ensures silent running while aintaining the very highest standards of efficiency. Electronic lock. This function (standard on all digital chronotherostats) perits locking all the controls to prevent anyone (e.g. children) fro changing any alreadyset paraeters.
gas convectors Safe and ecological. SEALED COMBUSTION CHAMBER operation does not use up oxygen in the heated roo, eliating harful eissions inside. Safety is ensured even in the case of accidental switchoff with: Therocouple (piezoelectric). Flae ionisation (electronic). External eissions are well below legally required liits. All this akes it possible to cobine concrete econoic advantages with absolute environental friendliness. Gas convectors, for every type of environent, both and odern. The quality of the aterials. Diecast aluiu heat exchanger: its large finned surface ensures extreely high efficiency and low heat inertia. Exclusive design. A soft line, with a depth of just 23 c. A radiator to be shown off in a broad range of colours and with DELUXE custoised features. DELUXE custoised features: irrored, with photos or paintings, coloured and chroed.
Sealedchaber convectors with FORCED cobustion Poster features. DIGITAL chronotherostat. ELECTRONIC control LOCK ( ). SEALED CHAMBER. adjustable fins COMPACT diensions. IN SERIES connection. Utost installation flexibility with pipe lengths (inlet and outlet) up to DOUBLE POWER (/) and DOUBLE SPEED preset. Modular aluiu heat exchanger. High efficiency thanks to crossover exchange principle: the burner develops a horizontal flae that crosses the vertical air flow produced by the convection fan. The cobustion syste adopted is especially silent. The air inlet duct is separated, at origin, fro the cobustion gas outlet duct. This solution perits obtaining both parallel (SINGLE end section) and double (INDIVIDUAL end sections) inlet and outlet. The inlet and outlet end sections can be positioned away fro each other (on the sae wall or different walls) with individual end sections, without using any doubling accessory. MAX pipe length internal pipe installation option MINIMUM OVERALL DIMENSIONS height 58 c width 39 and 57 c Poster ELECTRONIC control LOCK TYPES OF INSTALLATION NOTE: To prevent condensation buildup, ALWAYS insulate the outlet pipe. the end sections single Ø54 single Ø32 e Ø54 recessed screen single Ø32 individual external grid
NATURAL cobustion sealedchaber convectors Echo XXc features. SEALED CHAMBER. COMPACT diensions (Echo Xc). IN SERIES connection. Pipe length (inlet and outlet) up to 0. Modular aluiu heat exchanger. Single gas opening / flae ignition control (piezoelectric). Natural convection (CONVECTORS) or forced convection (FAN CONVECTORS with fan that can be disengaged). FAN THAT CAN BE DISENGAGED for ore silent running during night hours (Echo X). Also operates WITHOUT power supply (Echo XXc). Roo teperature adjustent by eans of odulating therostat (0//). Pilot therocouple flae control. Incorporated gas pressure stabiliser. internal pipe installation option adjustable fins Echo Xc adjustable fins Echo X Echo E features. DIGITAL chronotherostat ELECTRONIC control LOCK ( ). SEALED CHAMBER. DOUBLE POWER (/) preset. IN SERIES connection. Pipe length (inlet and outlet) up to 0. Modular aluiu heat exchanger. Autoatic ignition. Natural convection (CONVECTORS) or forced convection (FAN CONVECTORS). FAN THAT CAN BE DISENGAGED (at MIN speed) for ore silent running during the night hours (Echo E). Ionisation flae control. Incorporated gas pressure stabiliser. internal pipe installation option ELECTRONIC control LOCK adjustable fins Echo E the end sections TYPES OF INSTALLATION external grid individual
Ceiling installation Caratteristiche Poster. DIGITAL chronotherostat. ELECTRONIC control LOCK ( ). SEALED CHAMBER. COMPACT diensions. IN SERIES connection. Utost installation flexibility with pipe lengths (inlet and outlet) up to. DOUBLE POWER (/) and DOUBLE SPEED preset. Modular aluiu heat exchanger. High efficiency thanks to crossover exchange principle: the burner develops a horizontal flae that crosses the vertical air flow produced by the convection fan. The cobustion syste adopted is especially silent. The air inlet duct is separated, at origin, fro the cobustion gas outlet duct. This solution perits obtaining both parallel (SINGLE end section) and double (INDIVIDUAL end sections) inlet and outlet. The inlet and outlet end sections can be positioned away fro each other (on the sae wall or different walls) with individual end sections, without using any doubling accessory. MAX pipe length internal pipe installation option MINIMUM OVERALL DIMENSIONS height 58 c width 39 and 57 c adjustable fins Poster ELECTRONIC control LOCK TYPES OF INSTALLATION BRACKET NOTE: To prevent condensation buildup, ALWAYS insulate the outlet pipe. the end sections single Ø54 single Ø32 e Ø54 recessed screen single Ø32 individual external grid
Ceiling installation When the proble is space, the solution is ceiling Poster. The Poster ceiling radiators 40/60/80/ have been designed for installation in high places, directly on the ceiling or wall (with brackets). To prevent hot air flow being directed onto people, we suggest the appliance be installed at a MIN height of 2.3 and MAX height of 3, preventing any air stratification probles. installation Min 500 Min 50 129 Min 0 75 240 Ø 65 Ø 110 ACCESSORIES Pipe KIT (indispensable for operation). Pipe KIT (to be fitted fro inside roo). Min 0 210,5 240 45 Min 0 SDP, GP, GPu end section protection grid. Pipes, curves and end sections (custoised installations). Flue end section for roof outlet. Valley in soft polyethylene for roof outlet. INSULATING MATERIAL FOR INSULATING THE FLUE. Wall spacer (custoised installations). ACCESSORIES for custoising the shell. Technical specifications of heat convectors Type of exhaust (air intake / fue outlet) Heat input (Hi) Heat output Heat output CONVECTOR FAN CONVECTOR Efficiency (Hi) Heatable volue (average insulation and 30 / 50 kcal/h 3 ) Fan air flow Consuption G20 natural gas H Consuption LPG GAS inlet pipe diaeter Power supply/frequency Rated power input Power protection Noise at 3 CONVECTOR FAN CONVECTOR (NOT REQUIRED for Xc and Xtc) (FAN CONVECTOR) GAS Category Diaeter of hole in wall Ø32/Ø54 (parallel pipes P) (concentric pipes Xc, X and E) Air inlet pipe diaeter (pipes P) fue outlet (pipes P) inlet/outlet (concentric pipes Xc, X and E) MAX pipe length Ø32 (2 terals) (pipes P) Ø54 (2 terals) (pipes P) Ø32 (1 teral)(parallel pipes P) Ø54 (1 teral)(parallel pipes P) WIDTH HEIGHT DEPTH Net weight Poster PSR u.. PSR40 PSR60 PSR80 PSR C13 C33 C53 C63 3,85 6,5 8,0 10,0 2,27 4,55 5,60 7,0 3,5 5,85 7,4 9,1 2,4 4 5,07 6,20 % 92 3 84 50 143 86 210 126 259 5 3 /h 130 335 419 3 /h 0,407/0,285 0,688/0,481 0,847/0,593 1,06/0,742 kg/h 0,303/0,212 0,512/0,358 0,630/0,441 0,788/0,552 kg/h 0,299/0,209 0,505/0,354 0,621/0,435 0,777/0,544 Ø V/Hz 230/50 W 135 IP IP20 db A db A 38 39 40 40 II2H 3+ 65 / 110 NO / 110 32 / 54 54 32 / 54 54 10 3 10 5 1 10 508 658 808 958 580 kg 21 27,7 34 41,2
Efficiency (Hi) Heatable volue (average insulation and 30 / 50 kcal/h 3 ) Fan air flow Consuption G20 natural gas H Consuption LPG GAS inlet pipe diaeter Power supply/frequency (NOT REQUIRED for Xc and Xtc) Rated power input (FAN CONVECTOR) Power protection Noise at 3 CONVECTOR FAN CONVECTOR GAS Category Diaeter of hole in wall Ø32/Ø54 (parallel pipes P) (concentric pipes Xc, X and E) Air inlet pipe diaeter (pipes P) fue outlet (pipes P) inlet/outlet (concentric pipes Xc, X and E) MAX pipe length Ø32 (2 terals) (pipes P) Ø54 (2 terals) (pipes P) Ø32 (1 teral)(parallel pipes P) Ø54 (1 teral)(parallel pipes P) inlet / outlet (concentric pipes Xc, X and E) WIDTH HEIGHT DEPTH Net weight % 3 3 /h 3 /h kg/h Ø V/Hz W IP db A db A kg 580 21 27,7 34 41,2 10 5 508 3 1 658 808 10 10 958 65 / 110 32 / 54 32 / 54 NO / 110 54 54 II2H 3+ 35 35 36 37 230/50 100 80 IP20 0,339 0,250 0,582 0,430 0,847 0,625 1,06 0,783 Heat output FAN CONVECTOR Heat output CONVECTOR Type of exhaust (air intake / fue outlet) Heat input (Hi) 3,2 2,24 2,93 1,98 84 50 130 5,5 3,85 5,0 3,46 143 86 8,0 5,60 7,35 4,92 92 210 126 335 10,0 7,0 9,05 6,20 259 5 419 C13 C33 C53 C63 Technical specifications of heat convectors Echo XN, Xc, ER u.. PR30 PR50 PR70 PR Poster PR 580 50 MIN 50 MIN in PR30 PR50 PR70 PR A 300 450 600 750 B 204 204 204 204 C 312,5 312,5 312,5 312,5 D 267,5 267,5 267,5 267,5 A C D ACCESSORIES Pipe KIT (indispensable for operation). Pipe KIT (to be fitted fro inside roo). SDP, GP, GPu end section protection grid. Pipes, curves and end sections (custoised installations). Flue end section for roof outlet. Valley in soft polyethylene for roof outlet. INSULATING MATERIAL FOR INSULATING THE FLUE. Wall spacer (custoised installations). ACCESSORIES for custoising the shell. B RIGHT INSIDE 16,5 25 16,5 / 17,5 25 / 26,5 36 17,5 26,5 36 580 650 650 / 60 3 110 110 / 70 570 / 60 508 110 110 / 70 658 130 130 / 80 808 / 60 508 110 110 / 70 658 130 130 / 80 808 II2H 3+ II2H 3+ II2H 3+ 20,5 27 30,5 20,5 27 30,5 NO NO 20 30 50 40 50 IP20 IP20 IP20 70 NO 230/50 230/50 0,22 0,16 0,37 0,27 0,22 0,16 0,37 0,27 0,54 0,40 0,22 0,16 0,37 0,27 0,54 0,40 2,10 0,84 1,79 0,71 85 51 30 3,49 1,42 3,02 1,2 85 86 51 2,10 0,84 1,79 0,71 1,88 0,74 53 32 74 3,49 1,42 3,02 1,2 3,18 1,24 54 140 5,11 2,04 4,35 1,75 4,60 1,81,1 131 79 182 2,10 1,42 1,28 1,87 53 32 74 3,49 2,44 2,18 3,18 54 140 5,11 3,58 3, 4,60,1 131 79 182 C1 C1 C1 Xc18 Xc30 XN18 XN30 XN45 ER18 ER30 ER45 580 (Xc) 650 (X, E) 50 MIN 50 MIN in 18 30 45 A 195 345 3 A (od. Xc) 140 320 B 313 313 493 B (od. Xc) 250 250 C 163 163 163 D 505 505 505 D (od. Xc) 432 432 ACCESSORIES Pipe KIT (indispensable for operation). Tier KIT (Daily and Weecly). Convection fan KIT. Pipe KIT (to be fitted fro inside roo). GN end section protection grid. ACCESSORIES for custoising the shell. A B C D RIGHT INSIDE ITALKERO S.r.l. Via Luuba, 2 Zona Ind. Torrazzi 41100 Modena Italy Tel +39 059 2550711 FAX +39 059 40500 Co. +39 059 250160 http://www.italkero.it Eail: info@italkero.it NOTE: Due to ongoing product upgrading, aesthetic and diensional features, technical details, fittings and accessories could undergo changes and are not binding. 3522000381 Rev.2 01/2005