Light Compaction Equipment Full Product Range - LF / LG / LH / LP / LT / LX
Light-weight equipment for heavy-duty purposes Dynapac light-weight equipment for outstanding end results. Manoeuvrability, ergonomics and versatility are hallmarks of our light compaction machines. When it comes to engineering quality and cost-efficiency they share the solid foundation of Dynapac research and experience. We also listen to our customers, a key way to get input for future development. At Dynapac, we always strive to find new ways and better solutions. Productivity, performance, ergonomics and environmental considerations are prioritized areas. But equally important is your satisfaction and success. Forward Plates Dynapac offers a full range of forward plates, specially designed for compacting asphalt and granular soils. They are ideal for small repair and maintenance work, such as driveways and pathways, parking lots and backfilling in trenches. Forward and Reversible Plates Dynapac s forward and reverse plates constitute an economical alternative and compliment to a roller. Being all-round machines, they are specially designed to compact soil in narrow areas. Gravel Sand Silt Clay
Rammers Dynapac s range of rammers is designed for compacting cohesive soils, such as clay and silt but also sand and gravel. They are ideal for small repair jobs and in narrow areas, such as trenches or housing sites. Double Drum Rollers Double drum rollers are suitable for compacting thin layers of granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in narrow areas. High frequency technology and a powerful diesel engine give impressive performance with regard to the machine size. Rockfill Asphalt Trench Rollers The Dynapac LP8504 roller is the perfect choice for compacting cohesive and granular soils in connection with backfills, foundation work and similar projects. With no overhang, the LP8500 is also well suited for compaction work close to walls and other obstacles. Subbase Base Rockfill Asphalt
Rammers A wide range for tough conditions Dynapac rammers are suitable for applications on both granular and cohesive soils, where strict requirements are imposed for compaction in narrow areas, trenches and repair work. Made to cope with tough conditions Through the use of a cyclone pre-filter and a high capacity main airfilter, together with the built-in fuel filter, the Dynapac rammers are made to cope with toughest of conditions, where a demand for hard hitting compaction is needed. Serviceability and daily maintenance The LT rammer series features extremely easy access to all daily maintenance points. Simple solutions like changing the airfilter without use of tools are much appreciated by the user. Operation Idle Stop Air breather Easy handling for top performance To ensure easy handling and optimal performance Dynapac engineers have developed a multi-functional fuel tank featuring: Breather shut off, Electrical shut off, Shut off fuel and Throttle control in three fixed positions (Stop/Idle/Run). The fuel tank has a high capacity built-in fuel filter for optimal engine performance. The fuel filter can be changed with filled tank. Dynapac rammers equipped with Honda GX100 engine have a new carburator allowing full acceleration from idel to full speed without interruptions. Together with the new Dynapac Air Breather System, which replaces the primer pump, the engine can be very easily started after refueling.
Single lifting point on crank case for easier handling, reducing wear on shock absorbers. Dynapac Air Breather System makes the primer pump obsolete on the new Dynapac rammers. Strong engine protection. Efficient shock absorbers to reduce hand/ arm vibration with integrated handle stop. Lifting handle on foot for easier transportation. Multi-functional fuel tank with easy to reach throttle control with three fixed positions. Durable rammer engines for excellent reliability.
Rammers A wide range for though conditions Dynapac LT604 Dynapac LT700 Dynapac LT800 Dynapac LT6004 Dynapac LT5004 Dynapac LT7000 Round Forward Plate For flush compaction close to obstacles The LX90 vibratory plate compactor features a unique round base that allows flush compaction next to posts, pillars, guardrails, manholes, drainage inlets and foundations. The design of LX90 makes it easy to manoeuvre around obstacles.
RAMMERS LT604 LT604 LT700 LT800 LT800 LT5004 LT5004 LT6004 LT6004 LT7000 Operating mass (kg) 64 65 74 84 85 60 62 68 69 78 Force/blow (kn) 14,8 14,8 18,6 21,4 21,4 10 10 14,8 14,8 18,6 Speed (m/min) 15-17 15-17 15-18 13-16 13-16 15-18 15-18 15-18 15-18 15-18 Plate width (mm) 230 280 280 280 330 150 230 230 280 280 Amplitude (mm) 65-75 65-75 70-80 75-85 75-85 50-60 50-60 65-75 65-75 70-80 Frequeny (Hz) 12 12 12 12 12 11 11 12 12 12 Engine brand Honda Honda Honda Hatz Hatz Honda Honda Honda Honda Honda Rated power (kw) 2,2 2,2 2,9 3,4 3,4 2,2 2,2 2,2 2,2 2,9 Sound power, guaranteed (L wa db(a) 104 104 107 106 106 104 104 104 104 107 Sound pressure at operators ear (L pa db(a) 91 91 96 96 96 91 91 91 91 96 H/A vibrations, standard handle (m/s 2 ) 7 7 11,9 12,6 12,6 6,4 6,4 4,9 4,9 9,6 Part No. 4812099076 4812099077 4700770558 4700770560 4700770579 4812099078 4812099079 4812099080 4812099081 4700770604 Op. and Maintenance Manual ID (see below) ILT604-1EN ILT604-1EN ILT700-1EN ILT800EN ILT800EN ILT5004-1EN ILT5004-1EN ILT6004-1EN ILT6004-1EN ILT7000-1EN Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/ ROUND FORWARD PLATE LX90 Operating mass (kg) 96 Speed (m/min) 22 Plate diameter (mm) 450 Engine brand Honda Rated power (kw) 4,0 Sound power, guaranteed (L wa db(a) 104 Sound pressure at operators ear (L pa db(a) 92 H/A vibrations, standard handle (m/s2) 6,1 Part No. 4700770267 Op. and Maintenance Manual ID (see below) ILX090EN Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac. com/en/partsandservices/dynadoc/
Forward Soil & Asphalt Plates Versatile plates for increased efficiency The Dynapac LF forward plates are designed for compacting asphalt and granular soils. With Dynapac technology, you get quality, reliability and value for money. Speed and performance The latest Dynapac LF forward plates are fast. Approximately 20% faster than previous Dynapac models and with increased quality of the finished job. Our forward plates give you the possibility to reach a better end result than previously, such as with the specially engineered bottom plate, designed to leave no marks. Freedom of choice The LF plates are easily converted from soil to asphalt work, simply by hooking on a water tank. Outstanding in operation In tight and complicated spaces the LF plates prove their excellence. The handle is aligned with the centre of the plate for supreme and easy manoeuvrability, and it can even be raised to a vertical position in order to avoid obstacles. It is easily folded for transportation and storage. Dynapac vibration reducing handle reduces exposure to hand-transmitted vibration compared to plate models without such handles. The handle gives high operator comfort and the vibration values level are below the 2,5 m/s 2 daily exposure action value for an eight-hour reference period according to EU directive EC/2002/44. For the Dynapac LF75, as an example, the test values are 6 m/s 2 without handle and 1,2 m/s 2 with the vibration reduced handle. The values were obtained by laboratory type testing in accordance with EN500-4 standard. The values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user.
Water distribution a key quality factor The Dynapac LF -series is designed to water the entire contact surface is uniformly. The key is a unique water distribution system, integrated into the bottom plate. No pipes, and no sprinklers to clean. The water consumption is easily optimized by means of a flow adjustment valve, easily reached by the operator. Together with the removable water tank, with a large secured cap, this makes refills swift, simple and less frequent. The LF series has a unique design of the bottom plate and its edges give a well-defined contact surface to avoid marks on the surface. Contact surface with asphalt in blue. Some of the options available for the LF range are handles for manual lifting, protection frames, block paving kit to suit specific jobs or a design cover which can be added on the soil machines. Vibration reduced handle. Standard lifting eye for crane lifting. Positioned to keep the machine in balance during lifting. Removable water tank: just clip it on your plate to work on asphalt.
Forward Soil & Asphalt Plates Soil equipped machines Dynapac LF60 Dynapac LF75 Dynapac LF50 Dynapac LF80 FORWARD PLATES - soil LF50 LF60 LF75 LF75 LF80 LF100 LF100 Operating weight (kg) 52,5 57,5 79,8 83,2 82,1 94,9 103,7 Centrifugal force (kn) 8,4 10,4 15 15 19 17 17 Speed (m/min) 24 25 27 24 34 25 25 Plate width (mm) 320 350 420 500 420 500 500 Amplitude (mm) 0,9 0,9 1,0 1,0 1,3 0,9 0,9 Frequency (Hz) 95 95 95 95 95 95 95 Engine brand Honda Honda Honda Honda Honda Honda Hatz Rated power (kw) 2,2 2,2 4,1 4,1 4,1 4,1 2,5 Sound power, guaranteed (L wa db(a) 100 100 102 102 103 104 104 Sound pressure at operators ear (L pa db(a) 89 88 91 91 91 93 93 H/A vibrations, (m/s 2 ) 6,9 7,9 6,0 6,0 6,7 6,0 9,3 H/A vibrations, vibration reduced handle (m/s 2 ) 1,9 1,9 1,2 1,2 1,2 1,3 1,9 Part No. 4812099036 4812099039 4812099042 4812099047 4812099051 4812099055 4812099060 Op. and Maintenance Manual ID (see below) ILF050-1EN ILF060-2EN ILF075-2EN ILF075-2EN ILF080-1EN ILF100-1EN ILF100-1EN FORWARD PLATES - soil LF130* LF130* Operating mass (kg) 134,7 141,0 Centrifugal force (kn) 20 20 Speed (m/min) 22 22 Plate width (mm) 500 500 Amplitude (mm) 0,9 0,9 Frequency (Hz) 95 95 Engine brand Honda Hatz Rated power (kw) 4,1 2,5 Sound power, guaranteed (L wa db(a) 104 104 Sound pressure at operators ear (L pa db(a) 93 93 H/A vibrations, standard handle (m/s2) 5,4 9,3 H/A vibrations, vibration reduced handle (m/s 2 ) 1,1 1,9 Parts number 4812099064 4812099065 Op. and Maintenance Manual ID (see below) ILF130-1EN ILF130-1EN * with transport wheels Dynapac LF100 Dynapac LF130 Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/
Asphalt equipped machines The removable water tank makes water filling easy. Take the tank to a water tap or to the large water tank on your truck instead of the whole machine. Dynapac LF75 Dynapac LF80 Dynapac LF100 FORWARD PLATES - asphalt LF75* LF75* LF80* LF100 LF100* LF100* Operating mass (kg) 91,7 95,4 94,0 94,6 107,1 116,1 Centrifugal force (kn) 15 15 19 17 17 17 Speed (m/min) 27 24 34 25 25 25 Plate width (mm) 420 500 420 500 500 500 Water sprinkler kit (l) 13 13 13 13 13 13 Amplitude (mm) 1,0 1,0 1,3 0,9 0,9 0,9 Frequency (Hz) 95 95 95 95 95 95 Engine brand Honda Honda Honda Honda Honda Hatz Rated power (kw) 4,1 4,1 4,1 4,1 4,1 2,5 Sound power, guaranteed (L wa db(a) 102 102 103 104 104 104 Sound pressure at operators ear (L pa db(a) 91 91 91 93 93 93 H/A vibrations, standard handle (m/s 2 ) 6,0 6,0 6,7 6,0 6,0 9,3 H/A vibrations, vibration reduced handle (m/s 2 ) 1,2 1,2 1,2 1,3 1,3 1,9 Parts number 4812099045 4812099049 4812099053 4812099057 4812099059 4812099061 Op. and Maintenance Manual ID (see below) ILF075-2EN ILF075-2EN ILF080-1EN ILF100-1EN ILF100-1EN ILF100-1EN * with transport wheels Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/
Reversible Plates Excellent allround plates for soil compaction Dynapac reversible plates are known for their high compaction efficiency. Over the years Dynapac has studied compaction and can today recommend the right Dynapac machine for your application. The range of reversible plates are an economical alternative or compliment to a roller. These allround machines are specially designed to compact soil in confined areas, such as in trenches and parking lots, among other areas. Reversible plates are also suitable for special applications, such as block paving. Dynapac also offers a range of fully hydraulic reversible plate compactors, the LH range. Heavy-duty bottomplates for tough work The bottom plates on Dynapac LG reversible plates are made of Hardox 400, which is abrasion resistant with a hardness of 400 HBW. Easy-to-adjust handle and service friendly design The new LG400 Dynapac forward and reverse plates feature handles easy to adjust for each operator and a service friendly design with easy access to all vital parts.
Well protected engine by heavy-duty protecting frame. Fixed handle-grip for tough working conditions. Vibration reduced handle. Impact resistant steel covers. Straps to secure the joints between bottom plate and engine. The LG & LH ranges offers different widths of bottom plates. Heavy-duty Hardox 400 bottom plate. Dynapac LG200 Dynapac LG300 Dynapac LG160 Dynapac LG400 Dynapac LH700 Dynapac LG500 Dynapac LH800
Reversible Plates FORWARD AND REVERSIBLE PLATES LG160 LG160 LG160 LG160 LG200 LG200 LG200 LG300 LG300 el.start Operating mass (kg) 155 161 169 175 217 231 247 265 270 Centrifugal force (kn) 28 28 28 28 36 36 36 40 40 Speed (m/min) 22 22 22 22 25 25 25 25 25 Plate width (mm) 330 450 330 450 500 500 500 500 600 Amplitude (mm) 1,4 1,4 1,4 1,4 1.9 1.9 1.9 1,7 1,7 Frequeny (Hz) 80 80 80 80 65 65 65 68 68 Engine brand Honda Honda Hatz Hatz Honda Hatz Hatz Honda Honda Rated power (kw) 4,1 4,1 2,8 2,8 4,8 3,1 3,1 5,8 5,8 Sound power, guaranteed (L wa db(a) 108 108 108 108 105 108 108 108 108 Sound pressure at operators ear (L pa db(a) 92 92 92 92 90 90 90 92 92 H/A vibrations, standard handle (m/s 2 ) 1,5 1,5 2,4 2,4 3,5 3,5 3,5 2,4 2,4 Parts number 4700770679 4700770641 4700770680 4700770640 4700770615 4700770616 4700770617 4700770628 4700770681 Op. and Maintenance Manual ID (see below) ILG160-2EN ILG160-2EN ILG160-2EN ILG160-2EN ILG200EN ILG200EN ILG200EN ILG300-2EN ILG300-2EN FORWARD AND REVERSIBLE PLATES LG400 LG400 el.start CE LG400 el.start EPA Operating mass (kg) 398 436 436 Centrifugal force (kn) 52 52 52 Speed (m/min) 25 25 25 Plate width (mm) 650 650 650 Amplitude (mm) 1,8 1,8 1,8 Frequeny (Hz) 60 60 60 Engine brand Honda Lombardini Lombardini Rated power (kw) 7,7 6,2 6,4 Sound power, guaranteed (L wa db(a) 108 108 - Sound pressure at operators ear (L pa db(a) 93,2 94,5 - H/A vibrations, standard handle (m/s 2 ) 2,5 2,1 2,1 Parts number 4812099002 4812099115 4812099000 Op. and Maintenance Manual ID (see below) ILG400-1EN ILG400-1EN ILG400-1EN FORWARD AND REVERSIBLE PLATES LG300 LG300 LG300 el LG300 el.start LG500 LG500 LG500 el.start LG500 el.start LH700 el.start Operating mass (kg) 282 287 302 307 502 505 522 525 780 820 Centrifugal force (kn) 40 40 40 40 60 60 60 60 95 95 Speed (m/min) 35 25 25 25 24 24 24 24 30 30 Plate width (mm) 500 600 500 600 550 750 550 750 660 660 Amplitude (mm) 1,7 1,7 1,7 1,7 2,1 2,1 2,1 2,1 2,5 2,5 Frequeny (Hz) 68 68 68 68 60 60 60 60 53 53 Engine brand Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz Hatz Rated power (kw) 4,2 4,2 4,2 4,2 8,2 8,2 8,2 8,2 11,0 11,0 Sound power, guaranteed (L wa db(a) 108 108 108 108 109 109 109 109 109 109 Sound pressure at operators ear (L pa db(a) 94 94 94 94 96 96 91 91 95 H/A vibrations, standard handle (m/s2) 1,7 1,7 1,7 1,7 3,4 3,4 2,1 2,1 3,4 Parts number 4700770638 4700770682 4700770618 4700770683 4700770503 4700770620 4700770504 4700770505 4700770538 4700770572 Op. and Maintenance Manual ID (see below) ILG300-2EN ILG300-2EN ILG300-2EN ILG300-2EN ILG500-1EN ILG500-1EN ILG500-1EN ILG500-1EN ILH700EN ILH800EN Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see tables above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/ LH800
Double Drum Rollers The ultimate allrounder Walk behind rollers are suitable for compacting thin layers on granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in narrow areas. Oil-cooling system in world class To help avoid overheating Dynapac rollers are equipped with controlled oil temperature. This helps reduce unplanned stops thereby increase productivity by offering longer time of operation, longer service intervals and longer lifetime of the machine. Large water tank To increase the productivity, the machines are equipped with large watertanks for fewer refills of water. The water tank also serves as protection of the hydraulical components. Dynapac LP6500 Built-in oil cooler to withstand harsh environments Powerful engine for reliable operation. Large water tank for fewer refills of water. Heavy-duty protecting frame. Minimum overhang on both sides due to fully hydraulical design. The Dynapac LP8504 roller is suitable for compacting cohesive and granular soils in connection with backfills, foundation work, parking lots and similar applications. With no overhang, they are also well suited for compaction work close to obstacles. With the remote control the machine operator can stay out of dusty and noisy trenches where exhaust emissions can be accumulated.
Dynapac LP6500 Dynapac LP750 Dynapac LP8504 Rollers LP6500 LP6500 electric start LP750 LP750 electric start LP8504 Operating mass (kg) 696 716 993 1009 1675 Centrifugal force (kn) 21 21 25 25 65 Speed forward / reverse (m/min) 60/38 60/38 60/60 60/60 20,5/20,3 Drum width (mm) 650 650 750 750 850 Amplitude (mm) 0,45 0,45 0,5 0,5 1,1 Frequency (Hz) 61 61 63 63 32 Engine brand Hatz Hatz Hatz Hatz Hatz Rated power (kw) 6,8 6,8 8,9 8,9 12,5 Sound power, guaranteed (L wa db(a) 107 107 109 109 106 Sound pressure at operators ear (L pa db(a) 90 90 90 90 - H/A vibrations, standard handle (m/s 2 ) 4,3 4,0 4,3 4,3 - Parts number 4700770570 4700770571 4700770451 4700770454 4812099124 Op. and Maintenance Manual ID (see below) ILP6500-2EN ILP6500-2EN ILP750-2EN ILP750-2EN ILP8500-1EN Important: Full details of measurements are available in the Operation and Maintenance Manuals of the product (see table above for ID number). They can be found on www.dynapac.com/en/partsandservices/dynadoc/ Dynapac is so much more than just equipment. When our machines are distributed, we include a whole concept of service with original parts, support and organized know-how, covering all the needs in the entire field of compaction and paving on every continent. We have cut down on response times and increased availability, reliability and distribution speed. For optimum quality, the same engineer who designed the original machine also looked after the parts. We have a row of service points around the globe to provide peace of mind. Through the internet, our service points have documentation and parts availability information, updated minute by minute. With the Atlas Copco international network, we are always ready to offer support and assist with parts and service in order to maintain the highest product quality. We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines. The above information is a general description only, is not guaranteed and contains no warranties of any kind. www.dynapac.com 3492 0004 01 6-10 Atlas Copco Construction Tools AB, Stockhom, Sweden.