Machinery Listings Finishing Alea ALEA stenter-yoc 1974-working width 2400mm Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7109 Cost: 0 Terms: - Babcock Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7705 Cost: 90,000 Terms: EACH, http://finatexinternational.com/pictures/7705.zip EURO, CNF Babcock Stenter Frame year: 1993 Width: 2400mm Model: EC-AIR 6 Chambers Thermic Oil heated Kusters Padder 2200mm Corino Weft Straightner 2400mm year 1998 Horizontal Pin chain Cooling Zone at Exit Exit onto batching device Excellent condition Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 9843 Cost: 0 Terms: - -Babcock Stenter Frame year: 1991 Width: 2400mm Model: EC-AIR 6 Chambers Thermic Oil heated Mazzera 3 Bowl finishing padder Bianco weft straightner Horizontal Pin chain Cooling Zone at Exit Exit onto batching device
Reference: 10806 Cost: 0 Terms: SEE -BABCOCKRAM 1997 MODEL 2.30 WIDTH 1997 model yoc 2.30 working width 6 chambers Oil heated system pin+clip mahloflouard horizental chain LOCATI:My valuable customer in İRAN. PRICE:160.000 Euro ex.work REMARK:Pictures are on request. Reference: 12436 Cost: 0 Terms: - -STENTER BABCOCK, 1994 240CM, 4 CHAMBERS, OIL CIRCULATI, PIN, PADDING MANGLE, WEFT STRAIGHTNER, PLAITER, EXHAUST FAN, CTROL PANEL, 380/50 Reference: 13334 Cost: 0 Terms: - -1 x Babcock STENTER TYPE -1028 Width : 241cm YOC : 2001 Delivery Time : Immediate Nominal Width: 241 CM, Working Width; 215 CM, Entry: Bianco centering with dual padders, Weft straightener Mahlo: HRMC 94 HX, Pin chain entry with right & left edge sensors. Pin chain combine with clips & pins, Drying Chambers: 5NOS, Direct fired Burner with Maxon Burners(350 kw) and with 5 Nos direct coupled circulation fans. Drying Chambers also equipped with PLEAVA Sensors. Cooling Zone at exit. Individual Chain Drive system for both Right and Left side chains. Combine Exit with Batcher & Plaiter. Reference: 13763 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/13763.zip -1 pc - STENTER MACHINE ARTOS BABCOCK, y.o.c. 1988, w. w. 2400 mm Machine nr.:164xxx, Type: 5000/5700 horizontal chain pins With foulard, MENZEL, type 31490, w. w. 2350 mm Gas-heated,7 Chambers Two Weft Straightner : - 1-MAHLO, type RFMC-9GH, nr. 23/636H/XXXX, y.o.c. 1988, w. width 2400 mm; - 1-MAHLO, type RFMC-10A, nr. 25/664/3XXXX, y.o.c.. 2001, w. width 1800 mm; Price exw Europe: 62.000,00 EUR
Reference: 15638 Cost: 0 Terms: SEE -BABCOCK 7 CHAMBERS 230 CM WW GAS HEATED 2010 RECDITIED This is the offer for the following item: Line drying and heat setting completely overhauled in 2010 manufacturer Babcock Year built alleged circa 1990 (not detectable because there is no label) Working width of 2,300 mm ramosa. pliers The line is composed as follows : Headscarf 3-cylinder Width 2000 mm cylinders. useful working height 1800 mm The two outer cylinders are rubber coating, the central cylinder is coated with hard rubber, Double bowl impregnation bath reduced, Dancer synchronization Elstraight Reading system heads Optics Manufacturer Mahlo Width 2000 mm cylinders. useful working height 1800 mm stenter Manufacturer Babcock 7 rooms heated gas Burners and fans staggered fields, to get a better uniformity of ecioè temperature : 1 field burner to the left and to the right fan, 2 field burner to the right and left fan and so also the other fields Chain to return only horizontal mechanical pliers on Artos, is already prepared also for mounting plates with pins (if required is a modest cost about 2,500 Euro ) Double cooling output Device rolling output for large rolls Electric Electro for the supply of combustion air to the burners Device exhaust fan output Suction piping exhaust fumes that connect the machine all'esaustore Tubing ring for the supply of gas to the burners Price: Euro 110.000 for ex -mill floor. Reference: 15651 Cost: 0 Terms: - -BABCOCK 240 CM 8 CHAMBERS OIL HEATED 1997 1997model,240 cm ww,horizental chain,8 Chambers,oil heated. With cutting,suction device.without weft straightener. Price:120.000 eur EX.WORK Brueckner Reference: 9008 Cost: 0 Terms: - -Bruckner Stenter, Roller Width 2400mm, Working Width 2200mm, Year 1995, 4 Chambers, Gas Fired, Both Side Bruners (Total 8 Burners), Vertical Pin Chain Entry, Corino Fabric Entry System, Tendamatic Finger Entry, Gluing Device, Edge Cutting and Suction Devices, Exit by Plaiting.
Reference: 9100 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/9100.zip -Trend : Brückner Model : 1994 Chamber: 6 Kabin Width : 240 cm 150.000 EUR Reference: 9582 Cost: 0 Terms: - -Bruckner Stenter machine for knitting fabric - Year: 1999 - Working iwdht:2400mm - Chmaber: 4chambers 1set Weft straighteners Brand: Bianco - Itali Year: 1999 Working width: 22cm Type: Invertor system Control panel : 1pcs Reference: 10718 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10718.zip Brueckner, Ram, 2000 model, 240 cm -2000 model 6 chambers with natural gas 240 working width mahlo flouard. Price:230.000 euro EXWORK. Reference: 11703 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11703.zip -Bruckner Stenter, Roller Width 2400mm, Working Width 2200mm, Year 1995, 4 Chambers, Gas Fired, Both Side Bruners (Total 8 Burners), Vertical Pin Chain Entry for Knitted Fabrics, Corino Fabric Entry System, Tendamatic Finger Entry, Gluing Device, Edge Cutting and Suction Devices, Exit by Plaiting, Simonett Rolling Machine on Exit. Price: GBP 55000/- C&F Sea Port
Reference: 11748 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11748.zip - 1 x Brückner Stenter Type HN24/4, Year 1993, Working width min. 600 mm Max. 2400 mm, Speed of machine 4 80 m/min Entry Length 6 meter, 4 Chambers Gas Heated with 8 Burners each 3 meter Exit length 3.5 meter Horizontal pin chain Padder 2 bowls BIANCO Weft straightener with 6 heads Exit plaiter and batcher Machine is good condition Location- Germany- PRICE- Euro-135,000.00- CNF-Major- Reference: 12437 Cost: 0 Terms: - -BRUCKNER, 2001 240CM, 7 CHAMBERS, OIL CIRCULATI, PIN/CLIP CHAIN, HIGH ENTRANCE GANTRY, FABRIC FEED ROLLERS, STAINLESS STEEL SCRAY, 2ND HIGH GANTRY, CENTERING/GUIDING UNIT, 2 BOWL PADDING MANGLE, MAHLO WEFT STRAIGHTNER, OPERATOR PLANTFORM, HIGH DISPLAY GANTRY, ENTRY ZE 5 MTR, PHOTO CELL EDGE GUIDERS, TANDEMATIC UNCURLERS, STEAMING DEVICE, 3 MTR EXIT ZE WITH COLLING UNIT, 'A' FRAME BATCHER/PLAITER Reference: 12527 Cost: 0 Terms: - -BRUCKNER STENTER YEAR 1995 1X BRUCKNER STENTER YEAR 1995, FULLY REVISED IN 2010 AND CTROLLED BY SIEMENS TOUCH SYSTEM WITH S7 SOFTWARE KUSTER PADDER WITH BIANCO WEFT STRAIGHTNER WITH 6 EYES. FABRIC ENTRY SYSTEM, TENDAMATIC FINGER ENTRY, GLUING DEVICE 6 METER LG ENTARY, MAXIMUM WIDTH 2400MM,, 4 CHAMBERS, GAS FIRED, BOTH SIDE MAXI BURNERS (TOTAL 8 BURNERS), HORIZTAL PIN CHAIN ENTRY EXIT WITH COOLING ZE BY PLAITING, SIMETT ROLLING MACHINE EXIT. EXCELLENT RUNNING CDITI.
Reference: 13847 Cost: 0 Terms: - -BRUCKNER STENTER MACHINE NVB 22-6 Yoc 1985, width 2400 mm for knitting, electrical and steamer heated, n.6 compartments with pins, without mangle, with straightener Reference: 11394 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11394.zip Brückner Stenter 1995 model/240 vertical chain- 1995 model 6 chambers 240 -working width mahlo flouard,clips. Vertical Chain so especially for knitting fabrics. With natural gas Price:150.000 DOLLAR EXWORK Reference: 14544 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/14544.zip -Brückner 2002 Model 240 cm/gas Heated 6 Chambers 2002 Model 2400mm 6 chambers Natural gas heated With padder. Mahlo Weft Straighner Price:220.000 EUR CNF
Reference: 14952 Cost: 0 Terms: SEE -STENTER BRUCKNER MODEL YEAR 1985 W.V 2300 MM 4 CHAMBERS HOT OIL HEATED PIN AND CHAIN SELVEDGE CTROL ERLAHT LEIMER UNIT OUTLET BIG BATCHER AND PLAITER EX MİLL:55.000 USD Reference: 13739 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/13739.zip -Bruckner Tenter 2001 yoc 8 chambers 240 cm width,natural gas,vertical chain mahloflouard,padder,bruckner in excellent conditions. Price:250.000 EUR CNF Bruckner Tenter 1997 yoc 8 chambers 240 cm width,natural gas,vertical chain no mahloflouard no padder,bruckner in excellent conditions. Price:200.000 EUR CNF Reference: 10719 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10719.zip Brueckner, Ram, 2004, 240 cm 2004 model 6 chambers 240 working width natural gas mahlo flouard. Price:270.000 euro EXWORK. Reference: 4858 Cost: 103,000 Terms: usd, cfr http://finatexinternational.com/pictures/4858.zip 1 Bruckner Tenter Frame, Model VN 24/5, Year 1979, Working Width 2.4 m E&L Guiders KF4, Impregnation Foulard, Mahlo Weft Straightener RFMC 74S with 4 Heads Pin Chain, Vertical, 5 Compartments, Oil Heated, Cooling Chamber, Delivery to A-Frame
Reference: 16492 Cost: 0 Terms: - -STENTER MACHINE BRUCKNER ( NEW PATTY PACK UNUSED YEAR 1998 ) COMBINED PIN-CLIP CHAIN STRAIGHTENING RANGE: MINIMUM 600 MM, MAXIMUM 2400 MM SPEED 60 M/MIN (FOR FABRIC 150 G/M2) STEAM HEATED (STEAM REQUIREMENTS 2000 KG/HOUR) FABRIC WIDTH 2400 MM FOR 100% COTT OR POLY/COTT FABRIC SHEETING, SATEEN AND TWILL FABRIC MAXIMUM FABRIC DENSITY 250 G/M2 ENTRY CHAMBER LENGTH 3 METERS EXIT CHAMBER LENGTH 3 METERS 4 DRYING CHAMBERS (3 METERS LG EACH) STENTER ENTRY EQUIPPED WITH FRAME WITH FABRIC GUIDING ROLLERS COMPACT CE STRAIGHTENING AND CENTERING DEVICE WITH 2 SPIRAL ROLLERS AND 2 GUIDING ROLLERS WITH RUBBER COATING WITH ELECTRO-OPTICAL SENSOR FLUO-E TO AUTOMATICALLY CENTER FABRIC KLEINWEFERS BICOFLEX IMPREGNATING PADDER USED FOR TREATING FABRIC WITH STIFFENERS ROLL WIDTH 2600 MM MAXIMUM FABRIC WIDTH 2400 MM FABRIC WEIGHT 100-250 G/M2 SPEED 6-120 M/MIN INCLUDES MAHLO WEFTSTRAIGHTNER ORTHOMAT RFMC 10 WITH LCD DISPLAY 1 PAIR OF EDGE STRAIGHTENERS MODEL LA 5302 INFRARED DRYING DEVICE BRUNER BKT COOLING ZE LENGTH 1500 MM HIGH CAPACITY IIZING DEVICE ANTISTAT BATCHER AT EXIT EH-HWA
Reference: 15721 Cost: 0 Terms: - http://finatexinternational.com/pictures/15721.zip -Re: Used EH-HWA Gas Stenter. -Maker : EH HWA, Korea. -Yom : 2008 years. -Model : Platium. -Roller width : 2,600 mm. -Working width : 2,400 mm. -Nos,of chambers : 8 chambers. -Heating sources : Gas. -Electric power : 3p x 60hz x 380V. -Inverter driving method. -Machine speed :From 10M /min to upto 120m/min. -Horizontal pin chain conveyor -complete set with standard accessories. A, Texter guider. B, two bowl padding mangle. C, Screen board. D, 8 sets x Hot air circulation chambers with gas burner.. E,Exhaused Fan F,,Air cooling device. G, Water filled 2 bowl cooling cylinders. H, Plaiter. I, Control panel. -Location : Korea. -Condition : Running stopped at April,19th,2014 years. -Available : immediately. Kranz Reference: 7243 Cost: 90,000 Terms: EACH, http://finatexinternational.com/pictures/7243.zip EURO, CNF 1 KRANTZ STENTER FOR KNIT FABRIC, 5 chmabers, working width 240, oil heated, year 1980, beta padder 3 cylinders width 2 mts, Mahlo Gravimat FMI-7, MAHLO TEXTOMETER RMS-7, also equipped with thermol oil boiler BO, gas burner year 1984 Reference: 8098 Cost: 0 Terms: - KRANTZ K-10 TENTER FRAME - Krantz Model K-10 Tenter Frame, year 1990, working width 2400 mm, vertical return pin chain, 8 heating zones oven, gas fired burners, Serial Number 1031795, 480 volts / 60 Hz / 3 phase, including: High entry with Corino centering and guiding unit type Multi System, Serial No. 91/930, including: 2 Roll Padder with heated tank, Babcock Type 5805 2457, Serial No. 88025 001 164230; 20 Foot (6 meter) open entry section; Automatic Chain Oilers; Steamer; Allen Bradley Controls; Cooling Zone; Selvage Trimmers; 10 foot (3 meter) open exit; Exit Plaiter. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8099 Cost: 0 Terms: - KRANTZ K-10 TENTER FRAME - Used Krantz Model K-10 Tenter Frame, year 1991, working width 2400 mm, vertical return pin chain, 8 heating zones oven, gas fired burners, Serial Number 1032372, 480 volts / 60 Hz / 3 phase, including: High entry with Tandematic centering and guiding unit. 2 Roll Padder with heated tank, Krantz Serial No. 1032370, 20 Foot (6 meter) open entry section, Automatic Chain Oilers, Steamer, Allen Bradley Controls, 2 Cooling Zones, Selvage Trimmers, 10 foot (3 meter) open exit, Exit Plaiter. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!
Reference: 14762 Cost: 0 Terms: - -Manufacturer: Krantz Moenus / Germany Model: K 30 / Econ Air Roller width: 2600 mm Max. fabric width: 2400 mm Year of construction: 2005 Running hours: 80! (Company bought it for knitted fabric but never used it.) Electrical tension: 3 x 380 50 Hz Heating system: Gas Number of ChamberS: 6 Chain type: PIN Accessories: Entry with high inlet, " 2 Bowl Padder from Krantz / Moenus Model: 5805 " Bianco automatic weft straigthener model: M O2 " Entry field 6 meter length " E&L Uncurler left & right " Steaming section 1m length " Edges glueing devices for left & right " 6 Chamber heat setting " Cooling device with sep exhaust " Automtic edges cutting device, stepless-adjustable " Enrolling for small rolls tensionless " Batching system for tensionless enrolling Machine is still on Mill floor, stopped. Location : Europe Schengen Delivery: ready Reference: 14951 Cost: 0 Terms: SEE -STENTER KRANTZ MODEL YEAR 2003 W.V 2400 MM KINDLY KNITTING PIN AND VERTICAL CHAIN 6 CHAMBERS GAS HEATED MAHLO AND PADDER SELVEDGE CTROL OUTLET UN IT BIG BATCHING AND PLAITER EX MİLL:180.000 EURO
Reference: 14959 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/14959.zip -STENTER KRANTZ: MODEL YEAR 2003 W.V 2400 MM KINDLY KNITTING PIN AND VERTICAL CHAIN 6 CHAMBERS GAS HEATED MAHLO AND PADDER SELVEDGE CTROL OUTLET UN IT BIG BATCHING AND PLAITER Price Euro: 200,000 Exwork. Reference: 15586 Cost: 0 Terms: - -KRANTZ K 30 EC AIR Stenter.. Technical details: Manufacturer: Krantz Moenus / Germany Model: K 30 / Econ Air Roller width: 2600 mm Max. fabric width: 2400 mm Year of construction: 2005 Running hours: 80! (Company bought it for knitted fabric but never used it.) Electrical tension: 3 x 380 50 Hz Heating system: Gas Number of ChamberS: 6 Chain type: PIN Accessories: Entry with high inlet, " 2 Bowl Padder from Krantz / Moenus Model: 5805 " Bianco automatic weft straigthener model: M O2 " Entry field 6 meter length " E&L Uncurler left & right " Steaming section 1m length " Edges glueing devices for left & right " 6 Chamber heat setting " Cooling device with sep exhaust " Automtic edges cutting device, stepless-adjustable " Enrolling for small rolls tensionless " Batching system for tensionless enrolling Machine is still on Mill floor, stopped. Location : Europe Schengen Delivery: ready Price: upon request. Kuesters
Reference: 11353 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11353.zip MCS -1 Foulard KÜSTERS, type 223.14-2400, Y.O.M. 1984, machine number 10627454-41, roller width 255cm, working width 240cm, 3 rollers, lop-sided, 1 S-roller, stainless steel trough 12,000 Euro, fot Reference: 16249 Cost: 0 Terms: - -MCS BRAND CTINUOUS GAS SINGEING & IMPREGNATING WW 2400 YEAR 2008 TO BE USED FOR GAS SINGEING, DESIZING, BOILING & COLD BLEACHING TO PREPARE FABRIC FOR PRINTING ROLLERS WIDTH 2.6 M MAXIMUM FABRIC WIDTH 2.4 M SPEED 12-120 M/MIN INCLUDES FEEDING DEVICE FOR FABRIC IN ROLLS OR FOLDED FABRIC FABRIC CLOTH GUIDE WITH ROLL & MOVING PLATES BRUSHING UNITE WITH 2 BRUSHES & SUCTI DEVICE FOR DUST REMOVAL DOUBLE BURNER SINGEING DEVICE DESIZING/IMPREGNATING TANK MADE FROM STAINLESS STEEL (CAPACITY 15 M OF FABRIC) ADDITIAL TANK FOR MIXING CHEMICALS WITH CTROL DEVICE FOR CHEMICAL SOLUTI LEVELS PUMP TO DELIVER CHEMICAL SOLUTI TO THE IMPREGNATING TANK SQUEEZING DEVICE CTROL UNIT SOAPING SECTI MODEL HYDRA 10/0.75 FOR SLOW NSTOP ROTATI OF ROLLS OF IMPREGNATED FABRIC INCLUDES 10 MOTORS ROTATING 10 ROLLS 15 LITER TANK OIL PUMP VALVE FILTER LEVEL INDICATOR Monfort
Reference: 9083 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/9083.zip -Monforts Ram 1994 Model 6 chambers Wıdth 240 cm With natural gas Mahlo fular Needle latch Long input Edge cutting Exit dok roller Swinging Fiyat : 160.000 eur exw Reference: 9085 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/9085.zip -Monforts Ram 1998 Model 6 chambers Width 240 cm Natural gas Mahlo fular Needle mandal Long input Edge cutting Exit dok roller Swinging Fiyat : 180.000 eur exw Reference: 10141 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10141.zip -1996 model 8 chambers 240 working width heated oil mahlo fular,pin+clips 160.000 USD EX.WORK Reference: 11100 Cost: 0 Terms: SEE - MFORST RAM 1996 MODEL 8 CHAMBERS OIL HEATED 240 WORKING WIDTH-160.000 EUR EX.WORK
Reference: 11578 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11578.zip MFORST STENTER 1996 model 6 chambers 240 working width for knitting fabric,oil heated Mahloflouard pin+clip,including padder and weft straighner In working condition Price:150.000 euro ex.work Reference: 14244 Cost: 0 Terms: - -STENTER MFORTS, year 1990, 4 chambers, w.w. 2400 mm, gas heating, MAHLO weft Reference: 15146 Cost: 0 Terms: SEE -MFOST STENTER OIL HEATED/1997 1997 yoc 240 cm ww,6 chambers Oil Heated Mahlopadder,horizental chain Pin+clip Side cutting,swing at exit. Price:160.000 eur FOB Reference: 16309 Cost: 0 Terms: SEE -1 MTEX 14G/K stenter frame, year 1991, 7 compartments, vertical pinchain, working width 2400 mm, roller width 2600mm, THERMOFLUID-heating, overfeeding, selvedge uncurlers and - glueing - system, long entry with steaming compartment, with at entry : double axial unrolling system and MFORTS padder 2 bowls, at exit cooling compartment and axial batching as well as plaiter. Price: EUR 185.000/- CNF VALUE Santa Lucia Unitec
Reference: 15797 Cost: 0 Terms: - *1 SANTA LUCIA MINI-STENTER MACHINE MOD. RED Machine equipped with : -ww.2400mm -introduction by Bianco weftstrightner -overfeeding up to + 50% -a.c motorization + inverters -steaming unit on inlet conic field -uncurlers to work open knitting fabrics -oven of 4 meters long gas heated -cooling at exit -small roll + folder unit at exit Machine still working Price ex works mill floor Euro.26.000,00 -delivery inmediately payment 20% with order 80% before shipment dismantling loading excluded, if requestd we can offer it in separate mail assembly excluded, if requested we can offer in separate mail Strahm Reference: 13357 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/13357.zip Strahm -2004 model 4chambers double passages 240 cm work width,with flouard,chain and natural gas. Price:160.000 euro CNF Unitech Reference: 13550 Cost: 0 Terms: - -UNITECH STENTER WOVEN, YEAR 2003, WW 2400 MM UNITECH STENTER WORKING WIDTH 2.400 YEAR 2003 UNITECH STENTER RANGE FOR KNITTED FABRICS ENTRY CENTER UNWIND WITH J BOX ACCUMULATOR BETA 3 BOWL FINISHING PADDER BIANCO WEFT STRAIGHTNER GUMMING & TRIMMING, VERTICAL PIN CHAIN PRE-STEAMING, GAS HEATING 7 BAYS COOLING ZE TAKE OFF BY BATCHER AND PLAITER Yamuna
Reference: 9738 Cost: 0 Terms: - Printing Reggiani Make : Yamuna, No of chambers : Five Year of make: 3 chambers 1996 & 2 chambers added new in 2005 Heating : Oil heating type Clip/Pin : Pin type Fabric finishing width: 2400 mm Handling: 100 GSM to 400 GSM Mangle: 3 Bowl with Ebonite middle & Rubber top & bottom Delivery end: With cooling zone & Plaiter Between Mangle & feeding : Weft corrector Mechanical for bow & skew. Drives: DC motors for stenter & mangle M/c in working condition and with oil piping & flow control valves complete set for all five chambers. Reference: 16252 Cost: 0 Terms: - -REGIANNI STENTER WW 2400MM 12 CHAMBER GAS YEAR 2008 MODEL TERMA 240/12 YEAR 2008 MAXIMUM FINISHING WIDTH 2400 MM MINIMUM FINISHING WIDTH 600 MM ENTRY CHAMBER LENGTH 4.5 METERS EXIT CHAMBER LENGTH 3 METERS 12 CHAMBERS LENGTH 2 METERS EACH PIN CLIP TYPE GAS HEATED SPEED 100 M/MIN EVAPORATI CAPACITY 3240 KG/HR H2O COMES WITH IMPREGNATING PADDER MODEL FLC-3-240 3 CYLINDERS WITH THE FOLLOWING DIAMETERS: 300 MM 150 MM 300 MM ROLLERS WIDTH 2600 MM FRAME MADE FROM STAINLESS STEEL AISI 304 FABRIC GUIDERS KF2020 MAXIMUM WORK PRESSURE 18 TS SQUEEZING ROLLERS INCLUDES MAHLO WEFT STRAIGHTENER ORTHOMAT RFMC 126E MODEL 240 6 HEADS WIDTH 2400 MM 3 DIAGAL ROLLERS 2 CURVED ROLLERS STENTER ENTRY EQUIPPED WITH 2 FABRIC GUIDING STAINLESS STEEL ROLLERS DIA 140 MM 1 FEEDING STAINLESS STEEL ROLLER DIA 220 MM ENTRY CHAMBER INCLUDES FABRIC CENTERING DEVICE KRS51 E+L WITH PHOTO SENSORS FR55 2 EXTRA BRUSHES STENTER HAS HORIZTAL CHAINS THAT DO NOT REQUIRE LUBRICATI CHAIN LINK SIZE 125 MM 12 SECTIS EACH HAVE 8 AIR DUCTS AND 2 FANS