1. Product description Technical data The presence detector is suitable for detecting the movement of humans and animals through their radiant heat. The sensitive 4-element-PIR sensor technology for presence detection guarantees reliable detection of occupants even when they are seated. Therefore is ideally suited for occupancy related control functions within LON networks. The presence detector can be connected to a digital input module like lumina T6, lumina B8 or lumina BE8 to make the presence signal available in a LON network. Furthermore the presence detection range (for instance in corridors and stairways) can be extended by connecting them directly to multi sensors of type lumina MS4 and MS4/RC. The presence detector is available in two versions. The EB version is suitable for installation in suspended ceilings, ceiling sails or recessed junction boxes. The AP version allows surface mounting. Version 1.00 Page 1 of 6 Mar 25, 2014
2. Mounting 2.1. Dimensions installation variant 2.2. Dimensions surface mount variant Version 1.00 Page 2 of 6 Mar 25, 2014
2.3. Connections Pin Meaning 1 24V AC/DC power supply 2 3 Floating contact (output) 4 5 digital input (-) 6 digital input (+) Version 1.00 Page 3 of 6 Mar 25, 2014
2.4. Connection example The following scheme shows an installation of a multi sensor and several presence detectors. Please note that only one presence detector may be connected directly to the multi sensor. Instead of the multi sensor a digital input module for floating contacts can be used. Here several detectors can connected in parallel to an input. Alternatively, the digital input of the can be used to connect additional presence detectors. The contact (output) of the is closed, if presence has been detected or the digital input is closed. Out In Out In 24V AC/DC LON LON RTD Out In Out In Out In lumina MS4 lumina MS4/RC Version 1.00 Page 4 of 6 Mar 25, 2014
3. Technical data Supply operating voltage, power 24V DC ±15% 24V AC ±15% Connections Power supply, Input and Output Output Output Presence Input input Presence Indicators LED Occupancy Sensor Detection range, sitting Detection range, walking 6-pin detachable plug-in terminal connection for wire cross sections 0.2-1.5 mm² (solid and flex), two lines can be connected to each pin 1 x isolated contact for connection to a digital input for presence detection or for connection to a lumina MS4 / lumina MS4/RC multi-sensor. 1 x digital input for connection to isolated contacts signaling presence detection. status led 4 Element PIR Sensor 6m Ø, at 3m installation height 12m Ø, at 3m installation height Housing Type of protection IP 20 (EN 60529) Dimensions installation variant 84 x 68 mm (Ø x Height) Fitting dimensions installation variant 68 x 40 mm (Ø x Depth) Dimensions surface mount variant 89 x 80 mm (Ø x Height) Ambient conditions Operating temperature Transport temperature Relative humidity Installation height CE-Conformity -25 C... +60 C -25 C... +60 C Max 93% (w/o condensation) up to 2000 m above sea level 2004/108/EC Electromagnetic Compatibility 2006/95/EC Low voltage directive Version 1.00 Page 5 of 6 Mar 25, 2014
4. Products 4.1. Order information Order number Description 910 121 W, for suspended ceiling mounting, pure white 910 122 W, for surface mounting, pure white 5. Support The information given in this manual has been carefully collated. Should you have any further questions relating to this product, please contact: spega - Spelsberg Gebäudeautomation GmbH Zechenstr. 70 47443 Moers Germany Fon: +49 (2841) 88049-70 Fax: +49 (2841) 88049-49 Email: support@spega.com Version 1.00 Page 6 of 6 Mar 25, 2014