BuzziBlox
BuzziBlox Acoustic wall panels which tune a room in the speech spectrum range and especially the low to mid frequencies. FEATURES BuzziBlox foam layered panels come in different sizes, shapes and varying depths. By using alternating depths, the absorption of the different wavelengths ensures reverberation is diffused resulting in a more pleasant sound experience. Blox can be fixed to a wall in endless combinations and gives the appearance of artwork while functioning acoustically. BuzziBlox can also be suspended from the ceiling with screws or magnets. FINISHES Upholstered in fabric collections category A, B, C, D, E, F (excl. Tartan). Cables: Black or aluminium For fabric selection and full range of colours refer to BuzziSpace Finishes Specification. DESIGN BuzziSpace Studio
DIMENSIONS BuzziBlox Square 631 693 SQ-4 SQ-8 SQ-12 SQ-Wedge BuzziBlox Rectangular R-4 R-8 R-12 R-Woss BuzziBlox Rectangular XL R-Wols 1000 2000 2000 RXL-8 RXL-12 BuzziBlox Hexa 693 Hexa-4 Hexa-8 Hexa-12 Hexa-Wedge BuzziBlox Penta Penta-4 Penta-8 Penta-12 Penta-Wedge
FIXING SYSTEMS Fixing System Wall Fixing System Ceiling Pendant with Screw or Magnet Fixing Points (Note: Ceiling Suspended - Screw System not suitable for Rectangular XL) 2000 5000 Fixing System Ceiling Pendant Points 527 1122 452 Square Square Wedge Rectangular Rectangular Wedge 1850 925 Rectangular XL 460 432 395 367 Hexa Hexa Wedge Penta Penta Wedge
CARE & MAINTENANCE BUZZIFABRIC Vacuum clean regularly. Don t wash. Don t remove the BuzziFabric from the BUZZIROUGH Vacuum clean regularly. Don t wash. Don t remove the BuzziRough from the BUZZITERRA Vacuum clean regularly. Don t wash. Don t remove the BuzziTerra from the BUZZITARTAN Vacuum clean regularly. Don t wash. Don t remove the BuzziTartan from the BUZZISKIN BUZZIFELT Vacuum clean regularly. Don t wash. Don t remove the BuzziSkin BuzziFelt from the product. Treat spillages immediately. Professional dry clean or wipe clean BUZZILEATHER Dust with a soft cloth regularly. Don t expose to direct sunlight. Be careful with sharp objects. Spills should be blotted with a soft absorbent cloth. Don t rub. Never use detergents, shoe polish, alkalized products. TREVIRA CS + TREVIRA CS Vacuum clean regularly. Don t remove the BuzziTrevira CS + BuzziTrevira CS from the product. Treat spillages immediately. Professional dry clean or wipe clean KVADRAT REVIVE 1 KVADRAT REVIVE 2 Washable at max. 60ºC. Drip drying. KVADRAT CLARA 2 KVADRAT REMIX 2 KVADRAT HERO Washable at max. 30ºC, wool programme. Drip drying. TA-Massif Charcoal Mount covers in slightly wet condition. KVADRAT TONUS 4 KVADRAT TONUS MEADOW KVADRAT MEMORY Washable at max. 60ºC. Drip drying. KVADRAT MATRIX Washable at max. 60ºC. Drip drying. WOOD FINISHES First, wipe the surface with a dry cloth then clean carefully with a damp cloth. DO NOT use any abrasive cleaning products or scourers as this can damage the surface. In the event that scratching or marring has occurred we recommend that refinishing be carried out by a professional furniture refinishing company
CARE & MAINTENANCE LACQUERED FINISHES First clear the surface with a dry cloth then clean with a slightly damp cloth. DO NOT use abrasive cleaning products nor scourers, they can damage the surface. Renovation should be done by a specialist in furniture coating. It requires sanding of the parts and re-applying an equal amount of coating on all sides. HPL FINISHES Depending on the stains/dirt there are different prescriptions: Light: dry or damp paper towels, a cloth or sponge Normal: with a cloth or soft nylon brush and washing powder, soft soap, toilet soap, or washing-up liquid. If necessary, leave for a while then rinse thoroughly with clean water. Heavy: Discolouration stains through long exposure to tea, coffee, etc. use washing powder and household bleach (but do not repeat too often). For stains such as lead pencil, felt-tip pens, marker and ball-point pens use an organic solvent for example acetone (nail varnish remover). IMPORTANT Please do not cut or chop directly on the worktop surface Avoid abrasive cleaners and pads, corrosive or aggressive cleaning agents. The use of PVC aprons may affect the durability of the HPL on the post-formed edge of worktops, and could lead to premature wear in high traffic work areas such as in front of the sink and hob. Kettles, coffee machines, fryers and other heat or damp cource should not be positioned directly over worktop joints Cuts and scratches will be noticeable on dark decors and gloss finishes