Type Report Report Date: 11/12/2015

Similar documents
Central Station SIA Protocal

TS700. Intruder Alarm Control Panel ENT 0 ESC

What s New. Installation Manual. Please see page ii. Version 2.X

Contact ID as of 2/2/2015

NEW PAF EVENTS ============== CD EVENT CD EVENT

Type Report Report Date: 1/21/2015

PBS did not observe any paint chips on soil at the school, and no areas of major concern were observed.

ADEMCO CONTACT ID REPORTING (revised )

CDMAEX. CDMA Primary Cellular Alarm Communicator INSTALLATION & USER S GUIDE

Contact ID as of 11/28/2018

CONTACT ID REPORT CODES

FIELD RE-ASSEMBLY FOR FORM 3 AND FORM 7 SHIPMENT MODEL YD CHILLERS - MOD A AND B WITH GRAPHIC CONTROL CENTER AND ELECTRO-MECHANICAL STARTER

XT30/XT50 PROGRAMMING PART 2. Slide 1. Slide 2. Slide 3. Objectives. XT30/XT50 Basic Training Programming- Part 2. Bell Options

LTE30EX. LTE Primary Cellular Alarm Communicator INSTALLATION & USER S GUIDE

4G PRIMARY ALARM COMMUNICATOR INSTALLATION & USER S GUIDE

StarTek West Palm Beach Tech Rates 2018

2000 Series. Program Entry Guide. Control Panels

FMS. Semiflush-Mounted Test Switches

First Alert 1200C Installer Notes M. Leuck

Scantronic Leading the way in security

Table of Contents. All-In-One Wireless Security System V1.3. Programming Guide. Model # MG-6060 / MG-6030

XR10 Command Processor Panel Programming Guide

Effective Date: February Rev. 6/28/2018- Void After: February Product: Plumbing Fixture Fittings File No. 1285

Technical Manuals Online! - Keypad Programming. Basic Programming

Message Library English

UDACT-300A. Digital Alarm Communicator Transmitter. Installation and Operation Manual. LT-888 Rev 3 June DEF 2 ABC ENTER MENU 6 GHI JKL MNO

PROGRAMMING GUIDE SPECTRA CONTROL PANELS V , 1725EX, 1728 AND 1728EX 1755, 1755EX, 1758, AND 1758EX

8-zone Expansion Module

Testing the System. Battery Test. Dialer Test. Fire Drill Test (Code + [#] + 69) One-Man Fire Walk-Test (Code + [#] + 68)

RE6100 Series Helix Security and Automation Platform

November 29, Courtney Wilton Portland Public Schools 501 North Dixon Portland, OR 97227

Temperature Controller SA100. Initial Setting Manual IMR01J03-E1 RKC INSTRUMENT INC.

4-PGM Expansion Module

1.1 Features Accessory Devices About This Manual How to Use This Manual

User s Guide. SUB-MA7240O-0001.OG.Solution doc. Created: 6/05/03. Last Updated: 23/09/03. MA7240AO-0001 Version 1.0

Procedure. for. Installation. of the P/N & P/N Voice Alert Systems. Procedure IP 1 Rev. 1. Date

D6500 reports are shown in typewriter style letters. For example, AC FAILED indicates the report sent when the panel reports an AC power failure.

PFC-3002T Fire Alarm Control Panel

Area Systems While the alarm bell or siren is sounding, enter your user code. The system silences the alarm bell or siren.

MODEL YK (STYLE G) R-134a or R-531A WITH OPTIVIEW CONTROL CENTER FOR ELECTRO-MECHANICAL STARTER, SOLID STATE STARTER AND VARIABLE SPEED DRIVE

MG5000 V2.4 MG5050 V2.4 SP5500 V2.4 SP6000 V2.4 SP7000 V2.4. Programming Guide

FieldServer Driver - Serial FS Grinnell TFX Minerva

MODEL YK M3 M3 G4 THRU YK S6 S4 J2 (STYLE C) R-22 (COOLING ONLY) MODEL YK LB LB G4 THRU YK SE SC J4 (STYLE C) R-134a (COOLING ONLY)

VAP304 PRO INSTALLATION & OPERATION MANUAL

Technical Manuals Online! A B C DEF GHI JKL POWER 9 0 COMMAND YZ. User's Guide

Tomorrow s technology for today s security needs.

VISTA-100 Commercial Fire & Burglary Partitioned System

X64 Wireless Training

Advanced XRF Technology for Precision Plating Measurement

M* #..--.!.++. <...<... D~ta.. ~ - - B.s.P.x. #...0. ~ E. List # FINAL SELECTOR TEST FRAME SD TESTS BATTERY CUTOFF PANEL OFFICES

TS5160. Installation & User Guide. Compatible Equipment. CPA6 0M - Output Module Loudspeaker DC54/58 - Digital Communicators (Stand Alone Only)

Silencing an Alarm All/Perimeter and Home/Away Systems. Area Systems. What to do when a trouble tone is sounding

All-In-One Wireless Security System V3.2 Programming Guide. Model # MG6130 / MG6160

DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55302

XTLC PANEL INSTALLATION GUIDE

Honeywell Control Panels FOR RESIDENTIAL AND COMMERCIAL INSTALLATIONS. Feature Charts

INSTALLATION GUIDE XTLN-WIFI PANEL

Miniature Infrared Temperature Sensors with Optional Touch Screen Display. PSC-SSS-PM with touch screen display (-CRT version)

NetworX Series. NX-8 Commercial Fire Panel Installation and Startup

EMERgency 24 Internal Codes - Alphabetic

TYPE APPROVAL CERTIFICATE

FA-101U Fire Alarm Control Panel

EVALUATION SUBJECT: PLUMBING SUPPLY FITTING

XRSuper6. User s Guide. Technical Manuals Online! -

Programming Worksheets

TS700. Intruder Alarm Control Panel OPEN ENT 0 ESC

Fire Command Center. XR2400F User s Guide

Release Notes for Version 7.05 January 2007

TECOM SYSTEMS NETWORK MASTER

SENTROL ZX300/ZX310. Expandable Security System Control. Installation/ Programming 1

QUICK USER GUIDE. Alarm Control Panel

RUNNER 8/64. 8/64 Zones Control Panel. Program Summary Guide

OPERATING GUIDE for your GEMC-BK1 KEYPAD

Digital Communication Standard - Ademco Contact ID Protocol - for Alarm System Communications

VISTA-128BPT/ VISTA-250BPT/ VISTA-128BPTSIA

XR500/XR100. User s Guide

D9412GV3/D7412GV3 v8.03 to v8.05

OPERATING GUIDE for your GEM-RP1CAe2 KEYPAD

Easy Series ICP-EZM2. Quick Start Guide

9x5x QUICK REFERENCE PROGRAMMING GUIDE

0 4 / 0 4 / 1 4. GE Concord 4 Quick User Guide. GE Concord 4 Quick User Guide Page 1

MLCFC HMI NAVIGATION MANUAL

Sensor Selection Guide. Sensing for Building Applications

Digiplex System V2.14 / V2.2ACC. Control Panel Programming Guide

Input Type: 42: Medical: This is a 24 Hr type input it will activate the external sounder and report a CID event 100.

CC488. Quick Reference Guide Solution Ultima 880

Proudly Designed and Manufactured in New Zealand. By Arrowhead Alarm Products Ltd

Installation Manual GalaXy G2 / G3 / GD. o Settings GalaXy o Linking with iprotect o Keymap

RDC ACCESS. del. time 11:30-14:00 10:31-11:00 11:00 14:00 10:31-11: AF Blakemore DY4 0PY PRE 12:00 Book in pre 12:00

/10 Rev A

Property of Monitronics Inc

All-In-One Wireless Security System V1.0. Model # MG Programming Guide

Microprocessor Intruder Alarm System User Guide


Building Name: Our Lady of Sorrows Date: July 10, 2013

Fire Alarm Control Panels

Security System. User Guide for the LED Command Center

ACN Home Security in collaboration with Verisure UK. Market & Product Overview

CODESEC FIRE ALARM SYSTEMS. security technologies

Control/Communicator Installation Manual

Transcription:

Type Report Report Date: 11/12/2015 SIA1000101 SIA Format Template Type No Description Action Plan 8398 AN - Analog Restoral Restoral, No Alarm 8402 AR-AC Restoral Restoral, No Alarm 8403 AS - Analog Service System Alarm 8404 AT-AC trouble System Alarm 8513 BA-Burglary alarm General Alarm 8514 BB-Burglary bypass System Alert 8515 BC-Burglary cancel System Alert 8516 BD - Swinger Trouble System Alarm 8517 BE - Swinger Trbl Restore Restoral, No Alarm 8520 BH-Burglary A. rest. Restoral, No Alarm 8522 BJ-Burglary T. rest. Restoral, No Alarm 8525 BM - Burg Alarm Cross Pnt System Alert 8530 BR-Burglary restoral Restoral, No Alarm 8531 BS-Burglary supervisory. System Alert 8532 BT-Burglary trouble General Alarm 8533 BU-Burglary unbypass System Alert 8534 BV-Burglary Verified System Alert 8536 BX-Burglary test System Alert 8538 BZ - Missing Supervision System Alert 8641 CA-Automatic closing System Alarm 8644 CD - Closing Delinquent System Alarm 8645 CE-Closing extend System Alarm 8646 CF-Forced closing System Alarm 8647 CG-Close area System Alarm 8649 CI-Fail to close System Alert 8650 CJ-Late close System Alert 8651 CK-Early close System Alert 8652 CL-Closing report Closing (Set), No Alarm 8653 CM - Missing Al-Recnt Cls System Alarm

8656 CP-Automatic closing System Alarm 8658 CR-Recent closing System Alarm 8659 CS-Closing switch System Alarm 8660 CT-Late to open System Alert 8663 CW-Was force armed System Alert 8666 CZ-PPoint closing System Alarm 8769 DA - Card Assigned System Alarm 8770 DB - Card Deleted System Alarm 8771 DC-Access closed System Alarm 8772 DD-Access denied System Alarm 8773 DE - Request To Enter System Alarm 8774 DF-Door forced System Alert 8775 DG-Access granted System Alarm 8776 DH - Door Left Open-Rstrl Restoral, No Alarm 8778 DJ - Door Forced - Trouble System Alert 8779 DK-Access lockout System Alarm 8780 DL - Door Left Open-Alarm System Alarm 8781 DM - Door Left Open-Trbl System Alarm 8782 DN - Door Left Open System Alarm 8783 DO-Access open System Alarm 8784 DP - Access Denied-Bad TM System Alarm 8785 DQ - Access Denied-Un Arm System Alarm 8786 DR-Door restoral Restoral, No Alarm 8787 DS-Door station System Alarm 8788 DT-access trouble System Alarm 8789 DU-dealer ID System Alarm 8790 DV - Access Denied-Un Ent System Alarm 8791 DW - Access Denied -Intrlk System Alarm 8792 DX - Request To Exit System Alarm 8793 DX - Door Locked System Alarm 8794 DZ - Access Closed State System Alarm 8897 EA-Exit Alarm System Alarm 8901 EE-Exit error System Alarm 8914 ER-Expansion rest. Restoral, No Alarm 8916 ET-Expansion trouble System Alarm

8920 EX - Extrnl Device State System Alarm 8922 EZ - Missing Alarm-Ext ER System Alarm 9025 FA-Fire alarm Intruder Alarm 9026 FB-Fire bypass System Alert 9027 FC - Fire Cancel System Alert 9032 FH-Fire Alarm restore Restoral, No Alarm 9033 FI-Firetest begin System Alert 9034 FJ-Fire trouble restore Restoral, No Alarm 9035 FK-Fire test end System Alert 9037 FM - Fire Alarm Cross Pnt Intruder Alarm 9042 FR-Fire restoral Restoral, No Alarm 9043 FS-Fire supervisory System Alert 9044 FT-Fire trouble Intruder Alarm 9045 FU-Fire unbypass System Alert 9048 FX-Fire test System Alert 9049 FY-Missing fire Trouble General Alarm 9050 FZ - Missing Fire Sprv General Alarm 9153 GA-Gas alarm Intruder Alarm 9154 GB-Gas bypass System Alert 9160 GH-Gas A. restore Restoral, No Alarm 9162 GJ-Gas T. restore Restoral, No Alarm 9170 GR-Gas restoral Restoral, No Alarm 9171 GS-Gas supervisory System Alert 9172 GT-Gas trouble General Alarm 9173 GU-Gas unbypass System Alert 9176 GX-Gas test gas System Alert 9281 HA-Hold up alam General Alarm 9282 HB-Hold-up bypass System Alert 9288 HH-Hold-up a. rest. Restoral, No Alarm 9290 HJ-Hold-up T. rest. Restoral, No Alarm 9298 HR-Hold-up restoral Restoral, No Alarm 9299 HS-Hold-up supervisory System Alert 9300 HT-Hold-up trouble General Alarm 9301 HU-Hold-up unbypass System Alert 9409 IA - Eqpmt Fail Condition System Alarm 9426 IR - Eqpmt Fail Restore Restoral, No Alarm 9537 JA-User code tamper System Alarm 9540 JD-Date changed System Alarm 9544 JH-Holiday changed System Alarm

9547 JK - Latchkey Alert System Alarm 9548 JL-Log threshold System Alarm 9551 JO-Log overflow System Alarm 9552 JP - User On Premises System Alarm 9554 JR-Schedule execute System Alarm 9555 JS-Schedule change System Alarm 9556 JT-Time changed System Alarm 9558 JV-User code change System Alarm 9560 JX-User code delete System Alarm 9561 JY - User Code Added System Alarm 9562 JZ - User Level Set System Alarm 9665 KA-Heat alarm General Alarm 9666 KB-Heat bypass System Alert 9672 KH-Heat Alarm restore Restoral, No Alarm 9674 KJ-heat trouble restore Restoral, No Alarm 9682 KR-Heat restoral Restoral, No Alarm 9683 KS-Heat supervisory System Alert 9684 KT-Heat trouble System Alert 9685 KU-Heat unbypass System Alert 9794 LB-Local program System Alarm 9796 LD-Local program denied System Alarm 9797 LE-Listen-in ended Zone Info, No Alarm 9798 LF-Listen-in begin Zone Info, No Alarm 9810 LR-Phone line rest. Restoral, No Alarm 9811 LS-Local program System Alarm 9812 LT-Phone line trouble System Alarm 9813 LU-Local program fail System Alarm 9816 LX-Local program ended System Alarm 9823 L_ - Listen In + Seconds Zone Info, No Alarm 9921 MA-Medical alarm Intruder Alarm 9922 MB-Medical bypass System Alert 9928 MH-Medical alarm restore Restoral, No Alarm 9930 MJ-Medical T. test System Alert 9938 MR-Medical restoral Restoral, No Alarm 9939 MS-Medical supervisory System Alert 9940 MT-Medical trouble Intruder Alarm

9941 MU-Medical unbypass System Alert 10049 NA-No activity System Alarm 10051 NC - Network Condition System Alarm 10054 NF-Forced perimeter arm System Alarm 10060 NL-Perimeter armed System Alarm 10066 NR - Network Restoral Restoral, No Alarm 10067 NS - Activity Resumed System Alarm 10068 NT - Network Failure System Alarm 10177 OA-Automatic opening System Alarm 10179 OC-Cancel report System Alarm 10183 OG-Open area System Alarm 10184 OH - Early To Opn From AL System Alert 10185 OI-Fail to open System Alert 10186 OJ-Late open System Alert 10187 OK-Early open System Alert 10188 OL - Late To Open From AL System Alert 10192 OP-Opening report Opening (Unset), No Alarm 10194 OR-Disarm from alarm System Alarm 10195 OS-Opening keyswitch System Alarm 10196 OT-Late to close System Alert 10202 OZ-Point opening System Alarm 10305 PA-Panic alarm Intruder Alarm 10306 PB-Panic bypass System Alert 10312 PH-Panic alarm restore Restoral, No Alarm 10314 PJ-Panic trouble restore Restoral, No Alarm 10322 PR-Panic restoral Restoral, No Alarm 10323 PS-Panic supervisory System Alert 10324 PT-Panic trouble Intruder Alarm 10325 PU-Panic unbypass System Alert 10433 QA-Emergency alarm Intruder Alarm 10434 QB-Emergency bypass System Alert 10440 QH-Emergency. A. rest. Restoral, No Alarm 10442 QJ-Emergency. T. rest Restoral, No Alarm 10450 QR-Emergency. Restoral Restoral, No Alarm 10451 QS-Emergency. Supervisory System Alert

10452 QT-Emergency Trouble Intruder Alarm 10453 QU-Emergency. Unbypass System Alert 10561 RA-Remote Programer Called failed System Alarm 10562 RB-Remote programer begin System Alarm 10563 RC-Relay close System Alarm 10564 RD-Remote Program Denied System Alarm 10574 RN-Remote reset System Alarm 10575 RO-Relay open System Alarm 10576 RP-Automatic test System Alarm 10578 RR-Power up System Alarm 10579 RS-Remote Program Success System Alarm 10580 RT-Data lost System Alarm 10581 RU-Remote Program fail System Alarm 10584 RX-Manual test Zone Info, No Alarm 10585 RY - Test Off Normal System Alarm 10689 SA-Sprinkler alarm System Alert 10690 SB-Sprinkler. Bypass System Alert 10696 SH-Sprinkler. Alarm restore Restoral, No Alarm 10698 SJ-Sprinkler. Trouble restore Restoral, No Alarm 10706 SR-Sprinkler. Restore Restoral, No Alarm 10707 SS-Sprinkler. supervisory. System Alert 10708 ST-Sprinkler. Trouble System Alert 10709 SU-Sprinkler. unbypass System Alert 10817 TA-Tamper alarm System Alarm 10818 TB-Tamper bypass System Alarm 10819 TC - All Points Tested Zone Info, No Alarm 10821 TE-Test end Zone Info, No Alarm 10824 TH - Tamper Alrm Restore Restoral, No Alarm 10826 TJ - Tamper Trbl Restore Restoral, No Alarm 10832 TP - Walk Test Point System Alarm 10834 TR-Tamper restoral Restoral, No Alarm 10835 TS-Test start Test Report 10836 TT - Tamper Trouble System Alarm 10837 TU-Tamper unbypass System Alarm

10840 TX-Test Report Test Report 10945 UA-ntyped zone Alarm System Alarm 10946 UB-Untyped zone bypass System Alarm 10952 UH-Untyyped Alarm restoral Restoral, No Alarm 10954 UJ-Untyped trouble restoral Restoral, No Alarm 10962 UR-Untyped zone restoral Restoral, No Alarm 10963 US-Untyped zone sup. System Alarm 10964 UT-Untyped zone Trouble System Alarm 10965 UU-Untyped zone unbypass System Alarm 10968 UX-Undefined System Alarm 10969 UY-Untyped missing Trouble System Alarm 10970 UZ-Untyped missing Alarm System Alarm 11081 VI-Printer paper in System Alarm 11087 VO-Printer paper out System Alarm 11090 VR-Printer restore Restoral, No Alarm 11092 VT-Printer trouble System Alarm 11096 VX-Printer test System Alarm 11097 VY-Printer on line Restoral, No Alarm 11098 VZ-Printer off line System Alarm 11201 WA-Water alarm System Alarm 11202 WB-Water bypass System Alarm 11208 WH-Water alarm restoral Restoral, No Alarm 11210 WJ-Water trouble restoral Restoral, No Alarm 11218 WR-Water restoral Restoral, No Alarm 11219 WS-Water supervisory System Alarm 11220 WT-Water trouble System Alarm 11221 WU-Water unbypass System Alarm 11329 XA - Extra Accnt Report System Alarm 11333 XE-Extra point System Alarm 11334 XF-Extra RF point System Alarm 11336 XH - RF Interference Rst Restoral, No Alarm 11337 XI-Sensor reset System Alarm 11338 XJ - RF Rcvr Tamper Rst Restoral, No Alarm 11340 XL - Low RF Signal System Alarm 11341 XM - Missing Alrm-X Point System Alarm

11345 XQ - RF Interference System Alarm 11346 XR-TX battery restoral Restoral, No Alarm 11347 XS - RF Receiver Tamper System Alarm 11348 XT-TX battery trouble System Alarm 11351 XW-Forced point System Alarm 11352 XX - Fail To Test System Alarm 11457 YA - Bell Fault System Alarm 11458 YB-Busy seconds System Alarm 11459 YC-Communication fail System Alarm 11460 YD-RX line card trouble System Alarm 11461 YE-RX line card restoral Restoral, No Alarm 11462 YF-Parameter checksum fail System Alarm 11463 YG-Parameter changed System Alarm 11464 YH - Bell Restored Restoral, No Alarm 11465 YI - Overcurrent Trouble System Alarm 11466 YJ - Overcurrent Restore Restoral, No Alarm 11467 YK-Communication restoral Restoral, No Alarm 11469 YM-System battery mising System Alarm 11470 YN-Invalid report System Alarm 11471 YO-Unknown message System Alarm 11472 YP - Pwr Supply Trouble System Alarm 11473 YQ-Power supply restored Restoral, No Alarm 11474 YR-System battery restoral Restoral, No Alarm 11475 YS-Communication trouble System Alarm 11476 YT-System battery restoral Restoral, No Alarm 11479 YW-Watchdog reset System Alarm 11480 YX-Service required System Alarm 11481 YY-Status report System Alarm 11482 YZ-Service completed System Alarm 11585 ZA-Freeze alarm System Alarm 11586 ZB-Freeze bypass System Alarm 11592 ZH-Freeze A. restore Restoral, No Alarm 11594 ZJ-Freeze T. restore Restoral, No Alarm 11602 ZR-Freeze restoral Restoral, No Alarm

11603 ZS-Freeze supervisory System Alarm 11604 ZT-Freeze trouble System Alarm 11605 ZU-Freeze unbypass System Alarm