Cornice DH-1 Index Cornice Cornice Types and Information Pricing Chart Features Measuring / Installation Cornice Order Form DH-2 DH-3 DH-4 DH-5 DH-29 Index Drapery Hardware Drapery Hardware Information Estate Wrought Iron Pricing Custom Iron Traverse Rods Custom Wrought Iron Pricing C-Rings Outdoor Ready Hardware Contemporary Metal Pricing Plantation Wood Pricing Measuring Guide Samples Hardware Order Form DH-6 DH-7 DH-8 DH-9 DH-10 DH-11 DH-12 DH-12 DH-13 DH-14 DH-15 DH-16 DH-17 DH-18 DH-29 Index Drapery Motorization Drapery Motorization Pricing Drapery Motor Order Form How to Fill Out Order Form How to Make a Template Bent Track Order Form Motorization Controls Motorization Programming DH-20 DH-21 DH-22 DH-23 DH-24 DH-25 DH-26 DH-27 Index ADO ADO Information ADOglide Order Form ADOshade Order Form ADOwrap Order Form DH-30 DH-31 DH-32 DH-33 Sampling DH-34
DH-2 Cornice TYPE 1 Riverwalk Cornice Shown with returns. Minimum width: 12 Maximum width: 84 Pricing Chart Features and Specs Index Cornice Measuring & Installation Specialty Applications, Specifications Order Form DH-3 DH-3 DH-4 DH-29 TYPE 2 Riverwalk Cornice with Block Embellishments / GrandView Cornice with Key Embellishments No less than 24 between blocks / keys. 1 Block - Minimum width: 50-1/2, Maximum width: 84 1 Key - Minimum width: 54, Maximum with: 84 TYPE 3 Riverwalk Cornice with Block Embellishments / GrandView Cornice with Key Embellishments No less than 24 between blocks / keys. 2 Block / Key - Minimum width: 77, Maximum width: 120 2 Keys - Minimum width: 84, Maximum width: 120 TYPE 4 Riverwalk Cornice with Block Embellishments / GrandView Cornice with Key Embellishments No less than 24 between blocks / keys. 3 Block / Key - Minimum width: 103-1/2, Maximum width: 144 3 Keys - Minimum with: 114, Maximum with: 144 TYPE 5 Riverwalk Cornice with Block Embellishments / GrandView Cornice with Key Embellishments No less than 24 between blocks / keys. 4 Block / Key - Minimum width: 130, Maximum width: 144 4 Keys - Minimum with: 144, Maximum with: 144 Cornices will not have blocks or keys on corners. Returns will be as shown in the Type 1 Cornice shown at top of page. Minimum return - 3/4.
Pricing Chart Cornice DH-3 OB Product / OB or IB Window Size Widths Up To Price Chart 1 Window Size Dust Cover 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 102" 108" 120" 132" 144" IB Flush Mount No 57 66 75 87 96 105 114 123 134 144 153 162 171 181 191 210 228 249 OB Outside Mount Yes 64 74 84 94 103 113 121 133 142 151 160 170 179 190 199 217 237 256 OB Outside Mount over IB product Yes 71 83 92 101 110 120 129 140 149 158 167 177 187 197 206 224 244 263 Type Style - Type and Color Availability Center Blocks/ Keys Min Width Max Width I 0 12 84 2 1 50 1/2 /54 84 3 2 77 /84 120 4 3 103 1/2 /114 144 5 4 130 /144 144 Product Type & Style Minimum OB Return Size One-Inch Blinds 2-1/2" Two-Inch Blinds 3-1/4" Shades-Standard Headrail 3-1/4" Shades-Large Headrail 4-1/2" Shades-Simple Ascent 2-3/4" Shades-Cord Free 3" Woven Woods-Std. Headrail 3" Woven Woods-Simple Ascent 4" Woven Woods-Twin Headrail 4-1/2" Roller Shades 4-1/2" Shutter - By Pass System 5" Treanna Window Shadings 4-1/4" Vertical Blinds 5" Panel Track 2-3 Channels 3-3/4 Panel Track 4-5 Channels 5-3/8 Mandalay 6 CeAnna 6 Color # Color Name 48 Brite White 52 Alabaster 69 Black Onyx 74 Pecan 80 Latte 82 Walnut 83 Cinnamon 84 Espresso 85 Java 86 Maple 89 Ebony 98 Mahogany Product Notes The natural beauty of wood often includes dark pigments and strong grain patterns that appear randomly throughout the cornice. These are especially visible in cornices finished in light colors. Slight variations in color as well as minimal warpage may occur. Minor surface imperfections should also be expected. These are the natural tendencies that occur when dealing with wood products and are considered acceptable. When choosing any type cornice, the wood center embellishments and the cornice material may have variances in stain color from one another. The wood blocks generally have a darker stained dyelot. Riverwalk Features and Benefits Cornice Height 5" Optional Pricing Schedule - Net Cost Straight End Cut (instead of mitered corner) N/C Custom Return Sizes (Larger than 5") $8 Riverwalk Insert Charge (Roller Shades, Vertical Fabric & Treanna) Item #RW500 Cornice Depth (thickness) 11/16" to 7/8" Maximum Width Colors Available 25 Cornice Material Painted Finish Cornice Dust Cover Inside Mount Return Size Outside Mount Return Size Outside Mount Face Size Inside Mount Face Size Camber & Bow Tolerances Warranty 192" - Waiver required for widths > 192 Basswood 3/16" Veneer Product / sill depth specific Product specific 2-1/2"> width ordered 2-1/2"> width ordered 1/32" for each 12" of width 10 Year $10 Riverwalk Insert Charge (Woven Woods & Grasscloth) $15 Inside Corner Configuration $25 Unusual Requests All unusual requests must be approved through Customer Service before order is placed. The minimum surcharge is $65 but may increase depending on the request. The total charge will be given with the approval. Please note: Some requests may void the warranty of the product. Cornices over 90 in width that are not delivered by our truck system may be shipped in 2 pieces and must be assembled on the job site. Cornices over 180 in width will be delivered or shipped in 2 or 3 pieces and must be assembled on the job site.
DH-4 Cornice Features of Cornice Quality Construction The one-piece face construction is used for cornices up to 84 in width. Cornices over 84 in width are manufactured with multiple pieces. Finishes are applied by the same flowcoating equipment used on our ForestView and GrandView wood blind slats ensuring superior quality and the best color match possible. Cornices use the same species of wood (Basswood) as our wood blinds. The unique design of the cornice is a far better fit in today s modern American home decor. Cornice The 5 high cornice cornice is an excellent topper for any of our window covering products. The cornice is designed to accommodate an insert. At 5 high, the cornice gives you the flexibility to mix and match as a valance when wood blinds are your window covering of choice. Adaptable & Easy to Order Order your cornice with the desired window covering. All you need for the order is the window measurement and the cornice type. We make all of the necessary calculations and adjustments for you. The only extra information required is sill depth, if it is an inside mount. Each installation page provides you with a chart showing the cornice returns and dust cap sizes required for a perfect fit. Simple Installation Inside-mount installations on all other products, except 2 blinds, have a dust cap that extends into the window opening. Similar to an inside-mount vertical valance installation. Just place the cornice dust cover into the window sill, push dust coverto the far back edge of the sill and mount it by drilling screws into the dust cover and then directly up into the top of the window sill. Proceed with the installation of the window covering product. Outside-mount installations on all other products use a color-matched mounting strip that is attached to the wall, then the cornice is attached to the mounting strip. Outsidemount installations are recommended when windows have wood trim. Inside corners use our block system that we developed to make installation simple. We ship all inside corner systems in two pieces that are easily assembled on the job site by placing two (2) screws into predrilled holes. Easy to Install When used with any of our 2 horizontal blinds, our cornice uses the same clip system as our GrandView wood blind valance. Warranty The cornice carries a 10-year limited warranty. Cornice Features / Measuring & Installation Inside Mount Measuring and Installation Available for Type 1 only Maximum width 84 For inside-mount applications, measure the exact inside window opening. You must also measure the sill depth, which is the distance from the front edge of the sill to the back edge. If the window has trim molding, measure the sill depth from the back edge of the sill to the front edge of the molding. Outside Mount Measuring and Installation For outside-mount applications, measure the exact window opening. If molding is present around the window, measure from the outer edge of molding on one side to the outer edge of molding on the opposite side. Installation for outside-mount applications is simple. To speed installation, a pre-drilled 2 high color-coordinated mounting strip slightly narrower than the inside width of the cornice is included. STEP 1: Install the mounting strip using the screws provided. STEP 2: Install the product onto the mounting strip using standard installation screws provided with the product. Make sure when installing the product that you allow 1/4 clearance between the top of the mounting strip and the product. STEP 3: Place the cornice over the product allowing the back edge of the dust cover to rest on top of the mounting strip. Insert the screws provided into the pre-drilled holes in the dust cover and attach the cornice to the mounting strip. DO NOT USE ANGLE IRONS. Outside Mount over Inside Mounted Product Measuring and Installation For inside-mount applications where an outside mounted cornice is desired, measure the exact window opening. If molding is present around the window, measure from the outer edge of molding on one side to the outer edge of the molding on the opposite side. Installation for an outside-mounted cornice over an inside-mounted product is simple. (You may install the cornice using the existing molding surrounding the window opening. If you choose this type of installation, please skip to the last paragraph on this page.) To simplify installation, a pre-drilled, 1 high color-coordinated mounting strip the exact size of the window opening is provided. STEP 1: Install the mounting strip flush with the top of the window sill, using the screws provided. STEP 2: Place the cornice over the mounting strip so that the back edge of the dust cover and the returns touch the wall. STEP 3: Insert the screws provided into the pre-drilled holes in the dust cover and attach the cornice to the mounting strip. DO NOT USE ANGLE IRONS If you plan to install the cornice using the window molding, set the cornice over the molding so that the back edge of the dust cover and the returns touch the wall. Insert the screws provided into the pre-drilled holes in the dust cover and attach the cornice to the molding. (The window molding must be at least 1/2 thick to use this installation method.) The installation method for an insidemounted cornice is determined by the product type. If the product is a two-inch blind, first install the product, then install the cornice using the standard valance clips provided. The factory has already attached the valance receiver clips to the back of the cornice. (The cornice installs the same way a standard valance does.) A dust cover is only available for inside mounted cornices installed with two-inch blinds if the return size is greater than 3/4. For all other products, the cornice is installed first. STEP 1: Insert the screws provided into the pre-drilled holes in the dust cap and attach to the upper sill. Make sure the dust cap is fully inserted into the opening and the cornice returns are touching the exterior wall face. STEP 2: Install the product underneath the cornice using the standard installation method for that product. Based on your sill depth measurement and the product selected, we have adjusted the returns and dust cap dimensions to allow enough clearance for this to be easily accomplished. Cornice - OB Standard The chart to the right indicates the minimum return size that will provide enough clearance for the product you select to be covered with a cornice. You may increase the size of the returns as long as you increase the dust cap measurement by the same amount. All OB cornices are attached over the mounting strip the product is installed to. DO NOT USE ANGLE IRONS!
Measuring and Installation Cornice - OB over IB This is the recommended method for IB products where a cornice is to be used. It is easier to install than the true IB product application. The minimum return size is 3/4 for type 1 and 1-1/2 for type 2 through 5. All OB over IB cornices are attached over the mounting strip. DO NOT USE ANGLE IRONS! Return size (minimum return size for this application is 3/4 for type 1 and 1-1/2 for type 2 through 5. The dust cover and returns must be at least this depth to provide enough clearance to fit over the mounting strip for type 1. For types 2-5, the corner pieces extend 1/2 from the back of the cornice.) You may increase the size of the returns as long as you increase the dust cap measurement by the same amount. When the product being covered by the cornice is not totally recessed in the opening but rather extends into the room, the minimum return size and dust cap must be increased proportionately by the same amount of this extension. (Example: The product extends into the room by 1/2. The return size and dust cap must be increased by the same amount for a total return and dust cap size of 1 1/4 for type 1. ) The one drawback to using this method is that the coverage over the actual product is approximately 3 1/2 rather than the 5 height of the cornice because that the cornice itself extends 1 1/2 above the actual window opening. For standard height windows this will not cause a problem. However, looking up at a tall window, it becomes easy to see the product s headrail underneath the cornice. Cornice - IB When ordering an inside mount cornice, the minimum return and dust cap size are based on the product type and sill depth. The minimum sill depth varies from 1-1/2 to 2-5/8, depending on the product type selected. When mounting over 2 or 2-1/2 blinds it is not recommended you make the returns longer as the are installed using the standard 2 valance and receiver clip. Customer Service can advise on the return and dust cap size specifications. DO NOT USE ANGLE IRONS! Specifications and Specialty Applications Standard OB Cornice (Type 1) - Also used for OB installation over IB installed product. Maximum width is 84. Receiver Clip 13/16 thickness Valance Clip Return measurement Ordered width plus 2-1/2 for Type 1, 3-1/2 for Types 2 through 5 There is 2-1/2 added to every Type 1 cornice width, and 3-1/2 to every cornice width for Types 2 through 5 to allow for the returns/corners and necessary product clearances. This is called face width. Standard IB cornice for 2 and 2-1/2 blinds installs with our standard valance clip and receiver system. Return measurements are determined from the inside measurement of the cornice face to the back edge of the return. Dust Cap Cornice DH-5 Cornice can be made without returns. Ends will be a straight cut. Dust cap is made from 3/16 thick hardwood veneer. The mounting strip for an OB cornice is 2 high, 5/8 thick, and is colormatched hardwood. The mounting strip for an OB cornice over an IB product is 1 high, 5/8 thick, and is color-matched hardwood. The dust cap is manufactured 1/8 narrower than the window opening. Installation for a standard IB cornice for all products (excluding 2 and 2-1/2 blinds) is accomplished by attaching the dust cover to the upper window sill with screws. Cornices over 90 in width that are not delivered by our truck system, may be shipped in 2 pieces and must be assembled on the job site.cornice blocks are used on Types 2 thru 5 and allow for a maximum cornice width of 144. The block measures 2-1/2 wide, 5-3/8 high and is 1-1/2 deep. Corner Application Inside corner applications measures both cornices from the wall out to the opposite end where each cornice will stop. You must deduct the dust cap size plus 1 for the cornice face from each cornice. This will give you the necessary clearances for the cornice corner application to fit properly.
DH-6 Drapery Hardware
Drapery Hardware DH-7
DH-8 Drapery Hardware Drapery Hardware Pricing Refer to Drapery Hardware manual for more finial designs in this category. Estate Iron 1-1/2 Rod Type Description Rod width, in inches 12"-24" 25"-48" 49"-72" 73"-96" 97"-120" 121"-144" 145"-168" 169"-192" 193"-216" S Single Rod Set (1 1/2") 131.30 160.20 189.09 218.50 232.69 262.11 276.82 291.00 320.41 D Double Rod Set (1 1/2") 160.20 189.09 218.50 247.40 262.11 291.00 305.70 334.60 364.02 C Corner Window Rod Set 200.58 229.46 258.37 287.78 301.97 331.39 346.10 360.27 389.69 B Bay Window Rod Set (1 1/2 ) 246.77 275.67 304.55 333.97 348.16 377.57 392.28 406.46 435.88 IM Inside Mount Rod Set (1 1/2") 73.00 90.33 133.94 N/A N/A N/A N/A N/A N/A Number of brackets included * 2 2 2 3 3 3 4 4 5 Estate Iron 1-1/2" rod sets include two finials, forged brackets & mounting hardware. Above pricing is presented in two foot increments, however, all rods will be manufactured to the precise width that is ordered. No finials on inside mount rod sets. Double rod sets feature end cap finials on back rod. Corner windows are defined as having two sides; Bay windows are defined as have three sides. Call for pricing on Bay windows with more than three sides. For Corner and Bay windows, measure the top sides of all the windows and add together to get total rod width, then identify the price above for total rod width cost. * Rod width greater than 72", includes center support bracket(s) Finish Colors Finish No. Description 03 Matte Black 12 Pewter 14 Rustica 31 Oil Rubbed Bronze Finial Choices for 1-1/2 Rods Style No. Finial Name Finial Dimensions 101 Grande Pajaro 5-1/2" w x 4-1/2" h 102 Grande Double Scroll Leaf 8" w x 6" h 107 Grande Square Cap 2.75 x 3 h 108 Crown Ball 4 w x 3.25 h 109 Grande Scroll 7 w x 3.25 h 111 Grande Flame 8-1/2" w x 4" h 112 Grande Double Acanthus 9" w x 4-1/2" h 115 Grande Iron Ball 3" w x 3" h 117 Grande Camelot 5" w x 3-1/2" h 118 Grande Terrazzo 6-5/8" w x 3" h 120 Grande Papyrus 5" w x 3-3/8" h 121 Grande End Cap 7/8" w x 2-3/8" h The finials listed above are available on 1-1/2" rod sets only Brackets Item No. Description Price Rod Size Dimensions 1220 Forged Single Bracket 23.09 1 1/2" 1 1/8" w x 4 1/2" h x 4 5/8" d (3 1/2" projection) 1222 Forged Double Bracket (1) 23.09 1 1/2" 4" w x 1-1/8" h x 6-1/8" d (2-1/2" & 5 projection) 1221 Forged Extension Bracket 23.09 1 1/2" 4" w x 1-1/8" h x 6 1/8" d (5" projection) 1217 Center Support Bracket 23.09 1 1/2" 4" w x 1-1/8" h x 4-5/8" d (3-1/2" projection) 1217D Double Center Support Bracket 23.09 1 1/2" 4" w x 1-1/8" h x 6-1/8" d (3-1/2" projection) 1217E Extended Center Support Bracket 23.09 1 1/2" 4" w x 1-1/8" h x 6-1/8" d (3-1/2" projection) 1223 Inside Mount Bracket 23.09 1 1/2" 1 1/8" w 4 1/2" h x 1" d (1/8" projection) 1233T Elbow Connector (2) 23.09 1 1/2" 1 1/2" w x 1 1/2" d (90 degree connector) (1) Front cup holds a 1-1/2" rod and back cup holds a 1" rod (2) special connector for bay windows and corner windows Rings Item No. Description Price Rod Size Inside diameter of ring 1103 Rings - eyelet (10 pack) 26.24 1 1/2" 2" 1103C C-Rings - eyelet (10 pack) 26.24 1 1/2" 2" 1104 Rings - eyelet (10 pack) 31.50 1 1/2" 2 1/2" Tiebacks Item No. Description Price Dimensions 1000 Flame (U style) 26.24 9" face x 1 1/2" width x 3" projection 1001 Acanthus Leaf (U style) 26.24 7 3/4" face x 3 7/8" width x 7 3/4" projection 1002L Scroll (U style) - left 26.24 7" face x 4" width x 5" projection 1002R Scroll (U style) - right 26.24 7" face x 4" width x 5" projection 1003 Orbed (U style) 26.24 6" face x 1 1/2" width x 3" projection 1006 Iron Scroll (Post style) 31.50 7 5/8" face x 3 3/4" projection 1007 End Cap (Post style) 26.24 1 3/4" width x 4" projection 1008 End Cap (U style) 26.24 6" face x 1 1/2" width x 3" projection Rods up to 96 are made as one piece. Rods over 96 and up to 192 will come in two pieces. Rods over 192 and up to 288 will come in 3 pieces. Rods made in one piece over 96 carry a retail surcharge of $100, and a shipping and handling charge of $15 or percentage of invoice, whichever is higher. For open accounts the percentage is 5%. For COD accounts the percentage is 6%.
Drapery Hardware DH-9 Custom Iron Traverse Rods Hand drawn, elegantly crafted traverse rod sets are now available in the Custom Iron line. Rod sets come with everything you need to get the job done. Including rod, finials, brackets, mounting hardware, master carriers, carriers and batons. Available in Single, Double, Inside Mount, Corner and Bay window configurations. One way draw, single segment traverse rod sets are available up to 192 long. Additional shipping applies to rod sets over 105. Split draw traverse rod sets are available up to 216. Split draw rods over 108 are shipped in two segments. Ordering Split Draw Rod Sets Specify T for traverse at the end of the rod set part number on the order form. Rod will include two master carriers that will open from the center of the rod. Ordering One Way Draw Rod Sets Specify TR for right draw (opens to the right) or TL for left draw (opens to the left). Rod will include one long arm master carrier that allow the curtain to close past the end bracket. Left Draw
DH-10 Drapery Hardware
Drapery Hardware DH-11 Drapery Hardware Pricing Refer to Drapery Hardware manual for more finial designs Custom Iron 1 in this category. Rod Type Description Rod width, in inches 12"-24" 25"-48" 49"-72" 73"-96" 97"-120" 121"-144" 145"-168" 169"-192" 193"-216" S Single Rod Set (1") 96.11 110.82 154.42 169.13 189.09 215.35 230.06 244.77 264.73 ST Single Traverse Rod Set 180.86 203.03 254.06 276.23 303.65 337.36 359.53 381.70 409.11 D Double Rod Set (1") 133.94 154.42 189.09 212.73 226.91 253.17 270.51 291.00 314.64 DT Double Traverse Rod Set 257.46 292.86 342.45 381.01 410.11 451.30 483.56 518.96 557.53 C Corner Window Rod Set 159.09 173.80 217.39 232.10 252.06 278.33 293.04 307.74 327.71 B Bay Window Rod Set (1 ) 180.08 194.79 238.38 253.09 293.45 299.32 314.03 328.74 348.70 IM Inside Mount Rod Set (1") 58.29 75.62 N/A N/A N/A N/A N/A N/A N/A Number of brackets included * 2 2 2 3 3 3 4 4 5 Custom Iron 1" rod sets include two finials, forged brackets & mounting hardware. Above pricing is presented in two foot increments, however, all rods will be manufactured to the precise width that is ordered. No finials on inside mount rod sets. Double rod sets feature end cap finials on back rod. Corner windows are defined as having two sides; Bay windows are defined as have three sides. Call for pricing on Bay windows with more than three sides. For Corner and Bay windows, measure the top sides of all the windows and add together to get total rod width, then identify the price above for total rod width cost. * Rod width greater than 72", includes center support bracket(s) Finish Colors Finish No. Description 03 Matte Black 12 Pewter 14 Rustica 31 Oil Rubbed Bronze Finial Choices for 1 Rods Style No. Finial Name Finial Dimensions 131 Rounded Square Cap 2-1/4" w x 2-1/2"h 132 Terrazzo 6-5/8" w x 3" h 134 Torche 4" w x 3-1/2" h 135 Capri 3-1/2" w x 2-1/2" h 136 End Cap 7/8" w x 1-3/4" h 138 Small Acanthus 4-1/2" w x 2-3/4" h 139 Fleur 4-1/2 w x 3 h 140 Acorn 3-1/2 w x 2 h 147 Flame 5-3/8" w x 2-1/4" h 149 Iron Ball 3-1/2" w x 2-1/2" h The finials listed above are available on 1" rod sets only Brackets Item No. Description Price Rod Size Dimensions 1207 Forged Single Bracket 20.99 1" 1" w x 3 1/2" h x 3 1/4" d (2 1/2 projection) 1209 Forged Double Bracket (1) 20.99 1" 4" w x 1" h x 6" d (2 1/2" & 5"projection) 1208 Forged Extension Bracket 20.99 1" 4" w x 1" h x 6" d (5"projection) 1216 Center Support Bracket 20.99 1" 2-1/2" w x 1" h x 3-1/4" d (2-1/2" projection) 1216D Double Center Support Bracket 20.99 1" 2-1/2" w x 1" h x 3-1/4" d (2-1/2" projection) 1216E Extended Center Support Bracket 20.99 1" 2-1/2" w x 1" h x 3-1/4" d (2-1/2" projection) 1210 Inside Mount Bracket 20.99 1" 1 1/4" w x 2 1/4" h x 7/8" d (1/8" projection) 1233 Elbow Connector (2) 20.99 1" 1 1/4" w x 1 1/4" d (90 degree connector) (1) Front cup holds a 1" rod and back cup holds a 1" rod (2) special connector for bay windows and corner windows Rings Item No. Description Price Rod Size Inside diameter of ring 1102 Rings - eyelet (10 pack) 26.24 1" 1 1/2" 1102C C-Rings - eyelet (10 pack) 26.24 1" 1 1/2" Tiebacks Item No. Description Price Dimensions 1000 Flame (U style) 26.24 9" face x 1 1/2" width x 3" projection 1001 Acanthus Leaf (U style) 26.24 7 3/4" face x 3 7/8" width x 7 3/4" projection 1002L Scroll (U style) - left 26.24 7" face x 4" width x 5" projection 1002R Scroll (U style) - right 26.24 7" face x 4" width x 5" projection 1003 Orbed (U style) 26.24 6" face x 1 1/2" width x 3" projection 1006 Iron Scroll (Post style) 31.50 7 5/8" face x 3 3/4" projection 1007 End Cap (Post style) 26.24 1 3/4" width x 4" projection 1008 End Cap (U style) 26.24 6" face x 1 1/2" width x 3" projection Rods up to 96 are made as one piece. Rods over 96 and up to 192 will come in two pieces. Rods over 192 and up to 288 will come in 3 pieces. Rods made in one piece over 96 carry a retail surcharge of $100, and a shipping and handling charge of $15 or percentage of invoice, whichever is higher. For open accounts the percentage is 5%. For COD accounts the percentage is 6%.
DH-12 Drapery Hardware C Curtain Rings C-rings allow one-way draw curtains to be used on longer rods requiring a center support bracket(s). A great choice for covering a sliding glass door or large window. C-rings are used with our low profile center support bracket(s) which allow the rings to smoothly slide past the center bracket. C-rings appear as standard rings when viewed from the front. Outdoor Ready Drapery Hardware We are proud to announce our new Outdoor Ready finish option. Now any of our popular Custom Iron drapery hardware styles can be used to decorate your deck, cabana or outdoor space. This option is available for a 20% up charge, that includes a full 5 year replacement waranty. Sets must be installed under an eave or overhang, avoiding direct exposure to the elements.
Drapery Hardware DH-13 Contemporary Metal Designer quality 1 Adjustable to size metal rod sets. Sausalito - Featuring authentic materials - Complete sets available in 22-40, 40-76 and 76-148 lengths. Ball Cap Finishes Burnished Copper - 15 Nickel - 16 Black - 03 Oil Rubbed Bronze - 31 Ribbed Square Cap Accessories Traditions Baroque Brackets Eyelet Rings Round Flame Tiebacks Inside Mount Bracket Clip Rings Single rod sets include two finials, brackets and mounting hardware. Orchid Double rod sets include two rods, two finials of your choice on the front rod and end cap finials on the back rod. 76-148 rod sets include a center support bracket. End Cap More styles and details available in our price list, including bay window, inside mount and corner window rod sets.
DH-14 Drapery Hardware Drapery Hardware Pricing Refer to Drapery Hardware manual for more finial designs in this category. Contemporary Metal 1 Adjustable Rods Rod Type Description Adjustable rod width, in inches 22"-40" 40"-76" 76"-148" S Single Rod Set (1") 58.29 73.00 87.71 D Double Rod Set (1") 75.62 92.96 130.78 C Corner Window Set, per side 50.42 65.13 79.84 B Bay Window Set, per side 47.79 62.50 77.20 IM Inside Mount Rod Set (1") 35.70 51.99 0.00 Number of brackets included 2 2 3 Contemporary 1" adjustable rod sets include two finials, forged brackets & mounting hardware. No finials on inside mount rod sets. Double rod sets feature end cap finials on back rod. For Corner of Bay window sets, above pricing is per side; Corner windows have two sides and most Bay windows have three sides. * Rod width greater than 72", includes center support bracket(s) Finish Colors Finish No. Description 03 Matte Black 15 Burnished Copper 16 Brushed Nickel 31 Oil Rubbed Bronze Finial Choices for 1 Rods Style No. Finial Name Finial Dimensions 3100 Ribbed Square Cap 2 1/2" w x 3" h 3101 Sausalito 2 3/4" w x 2 1/2" h 3102 Ballcap 2" w x 2 1/2" h 3103 Baroque 2" w x 2 1/2" h 3104 Orchid 2 1/2" w x 3 1/2" h 3105 End Cap 1 1/2" w x 3/4" h 3107 Traditions 2 3/4" w x 2 1/2" h 3108 Round Flame 3" w x 3" h The finials listed above are available on 1" rod sets only Brackets Item No. Description Price Dimensions 3500 Single Magnetic Bracket 14.69 1" w x 2 1/2" h x 3 1/4" d (2 1/2" projection) 3502 Double Magnetic Bracket (1) 14.69 1" w x 2 1/2" h x 5 3/4" d (2 1/2" & 5" projection) 3501 Extension Bracket 14.69 1" w x 2 1/2" h x 5 3/4" d (5" projection) 3503 Inside Mount Bracket 14.69 1 1/4" w x 2 1/2" h x 7/8" d 1233 Elbow Connector (2) 14.69 1 1/4" w x 1 1/4" d (90 degree connector) (1) Front cup holds a 1" rod and back cup holds a 1" rod (2) special connector for bay windows and corner windows Rings Item No. Description Price Rod Size Inside diameter of ring 3600 Clip Rings (10 pack) 23.61 1" 1 1/2" 1102 Rings - Eyelet (10 pack) 26.23 1" 1 1/2" Tiebacks Item No. Description Price Dimensions TB100 Post Tieback w/finial choice 35.18 2" base x 4" deep x finial dimension
Plantation Wood Richly finished, plantation grown hardwood. Drapery Hardware DH-15 Traverse Sets Baton Drawn - 1 3/8 and 2 diameter rod sets - Custom made to any size. Finishes Mahogany - 28 White - 20 Turned Knob Astoria Leather - 23 Walnut - 23 Available with both 2 and 1 3/8 rod sets. Black - 41 Duke Accessories Duchess End Cap Aluminum track embedded in full round wood rods. Brackets Brackets Inside Mount Bracket Marquis Tiebacks Eyelet Rings All the same wood parts as a standard Plantation Wood set, plus embedded aluminum track master carriers, drapery carriers, end stops and batons. Available double rod sets feature traversing front and back rods. Single rod sets include two finials, brackets and mounting hardware. Double rod sets include two rods, two finials of your choice on the front rod and end cap finials on the back rod. Rods greater than 96 will ship as two pieces and include a center support bracket. Single piece long rods are available upon request, but incur additional freight costs. More styles and details available in the price list, including inside mount rods. Smooth Ball Sultan
DH-16 Drapery Hardware Drapery Hardware Pricing Refer to Drapery Hardware manual for more finial designs in this category. Plantation Wood Rod Type Description Rod width, in inches 1-3/8 Rod 48" 72" 96" 120" 144" S Single Rod Set (1 3/8") 94.01 107.14 122.90 135.51 148.11 ST Single Traverse Rod Set 168.10 209.07 243.74 278.41 314.13 D Double Rod Set (1 3/8") 132.89 161.77 178.06 193.82 209.58 DT Double Travers Rod Set 303.62 366.66 429.70 524.25 597.79 IM Inside Mount Rod Set (1 3/8") 45.69 58.29 71.42 N/A N/A Number of brackets included 2 2 3 3 4 Rod Type Description Rod width, in inches 2 Rod 48" 72" 96" 120" 144" S Single Rod Set (2") 139.19 161.77 194.34 206.95 219.56 ST Single Traverse Rod Set 194.36 243.74 303.62 366.66 419.19 D Double Rod Set (2") 193.82 226.39 258.96 283.12 309.39 DT Double Travers Rod Set 335.24 398.18 524.25 618.80 892.14 IM Inside Mount Rod Set (2") 74.57 97.17 119.75 N/A N/A Number of brackets included 2 2 3 3 4 Rods up to 96 are made as one piece. Rods over 96 and up to 192 will come in two pieces. Rods over 192 and up to 288 will come in 3 pieces. Rods made in one piece over 96 carry a retail surcharge of $100, and a shipping and handling charge of $15 or percentage of invoice, whichever is higher. For open accounts the percentage is 5%. For COD accounts the percentage is 6%. Plantation Wood rod sets include two finials, forged brackets and mounting hardware. Above pricing is presented in two foot increments, however, all rods will be manufactured to the precise width that is ordered. All Traverse Rod sets include aluminum traverse track embedded with wood pole, with master carrier, drapery carriers, end stops and baton(s). For one-way Traverse draw, indicate R on the order form for right draw or L for left draw. Standard rods wider than 96 will be made using two equal length segments joined using a rod connector in the middle of the rod unless otherwise requested. Traverse rods wider than 96 are available in one segment upon request and must be shipped via LTL truck additional freight charges apply. No finials on inside mount rod sets. Double rod sets feature end cap finials on back rod. Finial Choices Style No. Finial Name Rod Size Finial Dimensions Finish Colors 906 Wood Ball 1 3/8" 3" w x 1.75" h Finish No. Description 9002 Turned Knob 1 3/8" 2.75" w x 2" h 20 White 9005 Astoria 1 3/8" 3" w x 1.75" h 23 Leather 9006 End Cap 1 3/8" 1" w x 1.75" h 27 Walnut 907 Marquis 1 3/8 4.5 w x 3.5 h 28 Mahogany 908 Duke 1 3/8 3.5 w x 3 h 40 Black 906-2 Wood Ball 2" 5.25" w x 3.5" h 9002-2 Turned Knob 2" 4" w x 2.5" h 9005-2 Astoria 2" 4" w x 3.5" h 9006-2 End Cap 2" 1" w x 3" h 9009-2 Duchess 2 6 w x 3.5 h 9010-2 Sultan 2 4 w x 4.75 h Brackets Item No. Description Price Rod Size Dimensions 942 Single Bracket 17.84 1 3/8" 1" w x 3" h x 5 1/8" d (3 7/8" projection) 9420 Double Bracket (1) 17.84 1 3/8" 1" w x 3" x 8 3/4" d (3 7/8" & 7 3/8" projection) 922 Inside Mount Bracket 17.84 1 3/8" 3" face x 3/4" deep 942-2 Single Bracket 24.67 2" 1 1/2" w x 4" h x 6 3/4" d (5" projection) 9420-2 Double Bracket (2) 24.67 2" 1 3/8" w x 3 3/4" h x 9 1/2" d (4 1/4" & 7 3/4" projection) 922-2 Inside Mount Bracket 24.67 2" 3 1/2" face x 3/4" deep (1) Front cup holds a 1" rod and back cup holds a 1" rod (2) special connector for bay windows and corner windows Rings Item No. Description Price Rod Size Inside diameter of ring 930 Wood Rings - eyelet (10 pack) 32.55 1 3/8" 1 3/4" 930-2 Wood Rings - eyelet (10 pack) 38.85 2" 2 3/4" Tiebacks Item No. Description Price Dimensions 914 Rosette 30.98 4" face x 1" width x 3.5" deep
MEASURING GUIDE Drapery Hardware DH-17 Finial Width Rod Width Finial Width 5 Inch Overlap 5 Inch Overlap Window Width Determine Your Hardware Width Rod width does not include the width of the finials on each end. Finials add 2 to 8 in width on each end, depending on the finial style. We recommend a 5 overlap on each side of the window. For example if your window is 50 wide, you would normally order a 60 length rod and the overall finished width would be 64 to 84 depending upon the finial style. Bay Windows To order a bay window rod set correctly, you need to provide the separate measurement of each section of the bay area wall (shown here as A, B and C) and the degree of each wall angle (shown here as Angle #1 and Angle #2). If you would like us to determine the angles, you will need to additionally provide the opening width of the bay. We will calculate your rod size based on these measurements and rod style you select. Our standard calculations allow for the finials to be just short of the outside of the opening. If you wish them to project out past the opening or be held short, please provide the desired distances. Measuring Tips - Always use a steel tape measure. All dimensions should be taken to the nearest 1/4 inch. - Double check to make sure that you haven t transposed width and height measurements. - Measure every window. Windows that look identical often are not. - If you have any questions, please contact Customer Service for more information. Angle #1 Angle #2 B A Bay Window Measuring Opening Width C
DH-18 Drapery Hardware Hardware Sample Sets Our drapery hardware sample set is an easy way to show your customer the style and unsurpassed quality of the product. Each set is packaged in a tote bag that is convenient to bring to meetings and customer presentations. Plantation Wood Sample Contemporary Metal Sample Includes Custom Wrought Iron Sample Estate Wrought Iron Sample Sample Bag $79.00 Sample Bag Catalog Binder & Retail Price List Plantation Wood sample Contemporary Metal sample Custom Iron (1 ) sample Estate Iron (1 1/2 ) sample Finish sample plates Magnetic Bracket sample Wall Mount Samples $199.00 This sample set comes with a set of rings representing each of our finishes and four complete rod sets that include rod, finials, brackets and mounting hardware. You may specify which rods, finials and finishes you desire or just leave it up to us. Catalog binder including finish plates is included. Overall width of rods including finials is 22. Plantation Wood Sample Contemporary Metal Sample Catalog + Finish Samples Contemporary Metal Rings Custom Wrought Iron Sample Estate Wrought Iron Sample 22 Wrought Iron Rings Plantation Wood Rings
Drapery Motorization DH-19 Index Drapery Motorization Drapery Motorization Pricing Drapery Motor Order Form How to Fill Out Order Form How to Make a Template Bent Track Order Form Motorization Controls Motorization Programming DH-20 DH-21 DH-22 DH-23 DH-24 DH-25 DH-26 DH-27 Somfy s Glydea Motorized Drapery Tracks
DH-20 Drapery Motorization Glydea 60 Motorized Drapery Tracks Operates by hand held remote or home automation Has a manual override Recommended maximum weight per track: 132 pounds Recommended maximum length per track: 36 feet Splicing available Recommended that a bracket is installed every 2.5 feet Drapery rod is visible, call Skandia Customer Service for valance options if needed Stack Left Stack Right Split Draw One Way Straight Track Center Opening with Bend Glydea One Touch Ceiling Bracket Item #65-1780907 Retail: $5.00 4.5"-6" Adjustable Wall/Ceiling Bracket Kit (Includes double wall mount bracket and one touch bracket) Item #65-1782054 Retail $15. Center Opening with Continuous Curve See more options on page DH-23
Drapery Motorization DH-21 Pricing Glydea 60 RTS Motorized Tracks for Pinch Pleat Max Width # of Brackets Split Draw Side Opening 4Ft (48in) 3 1422 1406 5Ft (60in) 3 1463 1443 6Ft (72in) 3 1491 1476 7Ft (84in) 3 1525 1507 8 Ft (96in) 3 1558 1542 9 Ft (108in) 4 1599 1580 10 Ft (120in) 4 1665 1650 11 Ft (132in) 4 1702 1683 12Ft (144in) 5 1745 1730 13Ft (156in) 5 1778 1761 14Ft (168in) 5 1819 1804 15Ft (180in) 6 1854 1837 16Ft (192in) 6 1922 1907 17Ft (204in) 6 1964 1946 18Ft (216in) 7 1999 1983 19Ft (228in) 7 2103 2055 20Ft (240in) 7 2113 2098 21Ft (252in) 8 2151 2131 22Ft (264in) 8 2184 2168 23Ft (276in) 8 2227 2209 24Ft (288in) 9 2270 2254 25Ft (300in) 9 2307 2289 26Ft (312in) 9 2346 2330 27Ft (324in) 10 2365 2348 28Ft (336in) 10 2408 2392 29Ft (348in) 10 2443 2424 30Ft (360in) 11 2488 2473 31Ft (372in) 11 2521 2503 32Ft (384in) 11 2556 2541 33Ft (396in) 12 2590 2572 34Ft (408in) 12 2634 2619 35Ft (420in) 12 2660 2640 36Ft (432in) 13 2691 2675 Max Width # of Brackets Glydea 60 RTS Motorized Tracks for RippleFold RippleFold 80% RippleFold 100% RippleFold 120% (5 carriers/ft) (6 carriers/ft) (7 carriers/ft) Split Side Split Side Split Side Draw Opening Draw Opening Draw Opening 4Ft (48in) 3 1461 1445 1474 1307 1488 1472 5Ft (60in) 3 1511 1494 1527 1357 1546 1527 6Ft (72in) 3 1552 1537 1571 1404 1593 1578 7Ft (84in) 3 1595 1576 1617 1447 1644 1624 8 Ft (96in) 3 1638 1622 1665 1498 1693 1677 9 Ft (108in) 4 1689 1669 1716 1548 1751 1732 10 Ft (120in) 4 1765 1749 1800 1630 1833 1817 11 Ft (132in) 4 1812 1792 1847 1677 1888 1868 12Ft (144in) 5 1864 1849 1905 1737 1946 1931 13Ft (156in) 5 1909 1918 1950 1780 1999 1979 14Ft (168in) 5 1957 1942 2007 1837 2055 2040 15Ft (180in) 6 2005 1985 2053 1884 2108 2088 16Ft (192in) 6 2081 2097 2135 1968 2190 2174 17Ft (204in) 6 2133 2114 2188 2020 2250 2231 18Ft (216in) 7 2176 2161 2239 2071 2301 2285 19Ft (228in) 7 2262 2244 2324 2157 2395 2375 20Ft (240in) 7 2313 2297 2381 2111 2451 2436 21Ft (252in) 8 2360 2340 2428 2260 2504 2484 22Ft (264in) 8 2402 2424 2478 2309 2555 2539 23Ft (276in) 8 2455 2435 2531 2363 2615 2595 24Ft (288in) 9 2508 2492 2591 2422 2673 2658 25Ft (300in) 9 2555 2535 2638 2469 2728 2709 26Ft (312in) 9 2603 2588 2693 2523 2783 2767 27Ft (324in) 10 2634 2615 2724 2555 2820 2800 28Ft (336in) 10 2685 2670 2781 2613 2878 2863 29Ft (348in) 10 2730 2711 2828 2658 2931 2911 30Ft (360in) 11 2784 2769 2888 2720 2991 2976 31Ft (372in) 11 2829 2810 2933 2763 3042 3023 32Ft (384in) 11 2874 2859 2984 2816 3095 3079 33Ft (396in) 12 2962 2900 3028 2859 3145 3126 34Ft (408in) 12 2971 2956 3089 2919 3206 3190 35Ft (420in) 12 3007 2987 3124 2954 3249 3229 36Ft (432in) 13 3049 3032 3173 3003 3296 3280 All published manufactured prices are RTS versions. Prices include all hardware required for the drapery type, except for the bracket choice and the hand held remote. Choose the bracket (DH-20) and the recommended number on the chart above. Add the bracket cost and hand held remote cost DH-26) to obtain your final price. Use your Glydea Motorized Drapery Order Form. Call Skandia Customer Service for confirmation on pricing and ordering. Your order will be shipped directly from Somfy Automation Systems.
DH-22 Order Form Drapery Motorization
Drapery Motorization DH-23 How to Fill Out Order Form 1 Part Number Motor Glydea 60 Motor RTS with 10' plug 10 1 1 1 1 1 2 3 Width (Inches) Glydea motorized tracks are custom built according to the specified width. Please note that the finished track width is measured pulley end to pulley end. For bent and curved tracks please provide the total of all wall measurements. When fabricating your drapery please add 1.5 to your measurement to allow for the return. Tandem Y=Yes N=No Tandem motorized systems utilize two Glydea motors and are used for draperies that exceed the maximum single motor capacity. Tandem systems are available in dry contact or infrared control technologies only. Additional items needed for tandem systems should be noted in the Special Instructions Section of the order form. 4 Motor Side L=Left Side R=Right Side Choose the motor side best suited for your installation. 5 Track Type A-I See below O=Other NOTE: Somfy requires a template for all curved tracks. Please see Directions for Creating a Template for Drapery Curves on page for necessary information. A One Way D One Way w/bend G Center Opening w/2 Bends B Center Opening E R = 300 mm max (11.8 ) Center Opening w/bend H R = 3000 mm (11.8 ) One Way w/continuous Curve C Asymetrical F R = 300 mm max (11.8 ) One Way w/2 Bends I R = 3000 mm (118 ) Center Opening w/continuous Curve R = 300 mm max (11.8 ) R = 3000 mm (118 ) 6 7 8 9 10 11 Stack L=Left R=Right S=Split If Bent: # of Bends 1=1 Bend, 2=2 Bends, 3=3 Bends, etc NOTE: Somfy requires exact angle measurements for all bent tracks. Please submit completed and signed Bent Drapery Track Measurement Form page with all bent track orders. Carrier Type PP=Pinch Pleat (QTY of 3 per foot included) RF80 = RippleFold 80% fullness (QTY of 5 per foot spaced every 2 3/8 included) RF100 = RippleFold 100% fullness (QTY of 6 per foot spaced every 2 1/8 included) RF120 = RippleFold 120% fullness (QTY of 7 per foot spaced every 1 7/8 included) Brackets NOTE: Brackets are not included and must be ordered separately. Part Numbers One Touch Ceiling Bracket 1780907 4.5-6 Wall Mount Bracket 1782054 8.75-10.25 Double Wall Mount Bracket 1782053 Swivel Ceiling Bracket 1780906 Somfy recommends one (1) bracket by each pulley and one (1) bracket every 24. Additionally, one (1) bracket should be placed on each side of a splice if used. Butt Master Y=Yes N=No Only available for RippleFold center opening systems. Quantity 2 required; please note item numbers in Special Instructions Section of the order form item # 1780953. Splice X=Special splice instructions Somfy includes a center splice every 16ft of track. Please indicate in the Special Instructions Section if your requirements differ from Somfy's standard.
Drapery Motorization DH-24 How to Make a Template What you need: Large piece of construction paper Tape measure Marker Tape 1 2 3 Start with a large piece of construction paper that exceeds the depth and length of the curve. Place the paper on the floor or ceiling depending on the orientation of the curve. Secure the paper with the tape. 6 Please provide as much detail as possible and all templates must include the following: Indicate room side Note how the template was created -Template created on the floor facing up (See Figure 1)(Preferred method) -Template created on the ceiling facing down (See Figure 2) Purchase order number Customer name Company name and account number 4 Clearly define the stacking side, motor placement, pocket depth and center line of track with the marker. 7 Note the distance from the wall or the window to the center of the track. NOTE: Be sure to clear all possible obstructions such as handles, sills etc. 5 Mark the radius of the curve 8 Identify the following measurement points: Placement of motor Exact stopping point of track on template Total measurement of curve (See Figure 4- C ) Please call Somfy for specialty curving applications. Depending on your particular application, your project may require special attention. Figure 1: Template on the Floor Facing Up Carriers Down Figure 2: Template on the Ceiling Facing Down Ceiling Template Wall Template Ceiling up Wall Floor Figure 3: Critical Dimensions of a Curved Track Figure 4: Total Measurement of Curve Distance window to track min. 3 Pocket Width B Curved Window Center line of drapery track C L Wall C Cross section of window A Template Submission Instructions Attach a copy of the purchase order to the template. Roll up template and place in a mailing tube. DO NOT FOLD TEMPLATE Mail to: Skandia Somfy Systems, Window Inc. Fashions Skandia Window Fashions 270 121 Crossway Herrod Blvd. Road 10050 Scripps Ranch Court Tallahassee, Dayton, NJ 08810 FL 32305 San Diego, CA 92131 Attn: Drapery Department NOTE: When mailing, be sure to: - Include Get a tracking your return number address - Include your your account return number address on the drapery order form - Include your sales order number on the label Acceptable materials for making templates: Kraft Paper Butcher Paper Construction Paper Somfy will not accept templates made from the following materials: Newspaper Plastic Wax Paper Fabric Tissue Paper Roofing Paper Existing Arch Shades Wrapping Paper NOTE: If the material used to make a template stretches, tears easily, will not lay flat or will mark the fabric - IT WILL NOT BE USED. Note: Somfy Net Surcharges for drapery tracks that are custom curved or bent 65-9014999 Somfy Service Charge for Custom Curving/Bending $79.57 Net 65-9014998 Somfy Special Packing Charge for Custom Curving/Bending $80.00 Net
Drapery Motorization DH-25 The following dimensions are shown from the top view of the track and show various wall designs. 1 Choose the design that best fits your room setup. 2 Provide all of the proper wall measurements and degrees of all angles. 3 Provide the Return measurement R (distance from wall to front of drapery track as shown) and submit to Somfy. NOTE: When fabricating your drapery, please add 1.5 to your drapery measurement to allow for the return. Bent Track Order Form Style 1 Measurements R B WALL Style 2 Measurements B R BC C WALL TRACK CD D A AB TRACK BC C A AB DE E AE Style 3 Measurements A R AB B WALL TRACK BC C Style 4 Measurements C AB B BC R WALL TRACK CD D DE AC A AE E Style 5 Measurements A R AB WALL TR A CK B Unless stated, measurements given are wall measurements and Somfy will make allowances. Style A B C D E AC AE TRACK 1 TRACK 2 Degree of Bend AB BC CD DE R Dimension Style A B C D E AC AE Degree of Bend AB BC CD DE R Dimension NOTE: Orders for bent tracks will not be accepted without a signed copy of this form accompanied by the Drapery Order Form. NOTE: Somfy includes a center splice every 16 of track. Please indicate in the Special Instructions section of the Drapery Order Form if your requirements differ from Somfy s standard. Date: Company Name: Contact Name: P.O. # PRINT NAME: SIGNATURE: Account #: Notes: TITLE: DATE:
DH-26 Controls Drapery Motorization Remotes for Radio Frequency (RF) 1 Channel Remote Item# 65-1810632 Retail: $110.00 SPECIAL ORDER COLORS: Silver, Black, White w/blue (Patio Finish) Call for pricing 5 Channel Remote Item# 65-1810633 Retail: $143.00 SPECIAL ORDER COLORS: Silver, Black, White w/blue (Patio Finish) Call for pricing 5 Channel Wall Switch (White) Item# 65-1810813 Retail: $269.00 16 Channel Remote w/on-screen Display SPECIAL ORDER (White) Retail: $455 Item# 65-1811081 (Silver) Retail: $500.00 Item# 65-1811082 Time Control Remote SPECIAL ORDER Item# 65-1805176 Retail: $332.00 ThermoSunis Indoor Wirefree RTS Remote SPECIAL ORDER Item# 65-9013708 Retail: $455.00 SPECIAL ORDER OPTIONS: 1 Channel Wall Switch SPECIAL ORDER (White, Black, Ivory, Almond) Item #65-1810897 Retail: $257.00 5 Channel Wall Switch SPECIAL ORDER (White, Black, Ivory, Almond) Item #1810813 Retail: $269 Wall Switch 2 Channel, 3 Channel, 4 Channel SPECIAL ORDER White, Black, Ivory Call for pricing Wall Switch Face Plates Convert 5 Channel to 2, 3, or 4 Channel wall switch White, Black and Ivory Call for pricing Wall Switch Deluxe Label Set SPECIAL ORDER Wider variety of labels for customizing switches with specific room names or products names. 56 labels total. Call for pricing Table Top Holder SPECIAL ORDER Holds 1 Channel or 5 Channel remote upright on table surface. Call for pricing RTS Repeater SPECIAL ORDER Device used in large rooms to enhance signal between remote and motors. Solves the challenge of transmitting the signal in particularly large rooms or areas. Item #65-1810791 Retail: $370.00 Power Distribution Boxes and Transformers are available when hardwiring motors. Call for pricing. Training Training Education Available Call Customer Service Motorization Notebook and DVD (Pricing examples included) Cost: No Charge Item #13-0000-12-1 Motorization Brochure (Enhance Your Lifestyle) Cost: No Charge Item #14-0000-12
Drapery Motorization DH-27 How to Program Glydea RTS 60 Drapery Track Resetting and Programming Step 1 Resetting the Glydea RTS Drapery Track (see picture of bottom of motor) 1. Press the receiver Program Button on the motor until the drapery jogs 3 times. All the settings are erased. Step 2 Manually move drapery to a middle position along the track. This allows for movement of the motor in either direction. ADJUSTING THE UPPER (OPEN) AND LOWER (CLOSED) LIMITS Step 1 Go to the original UP or DOWN limit to be re-adjusted. Step 2 Press and hold the UP and DOWN buttons at the same time until the drapery jogs once. Step 3 Press the UP or DOWN button to move drapery to the new limit desired. Step 4 To confirm the new limit, press and hold the MY button until the drapery jogs once. The new limit is now set. Step 3 Press and hold the UP and DOWN buttons at the same time until the drapery jogs once. Step 4 Briefly press the UP or DOWN button, the drapery automatically should open when the UP button is pressed and close when the DOWN button is pressed. Step 5 (if needed) If the direction of the drapery is incorrect, Press the MY button until the drapery jogs once, the direction should be corrected. Step 6 Press the Programming Button on the back of the RTS transmitter until the motor jogs once. Programming is completed.
DH-28 Order Forms Product That Cornice Will Be Installed Over * * * Skandia Cornice Order Form Tallahassee, FL (850) 878-6093 Account #: Ship To: San Diego, CA (858) 635-7786 Account Name: Date of Order: Address: Sidemark/PO#: City, State, Zip: Rush Order 24-hour 48-hour (extra charge) Telephone # (required): Special Shipping Instructions: Line No. 1. 2. 3. 4. 5. 6. 7. Qty Installation Width Sill Depth (only required for IB installation) Cornice Style Cornice Type Riverwalk (block) GrandView (key) Color Number For a detailed description of what options are available for each product listed above, please refer to the product section in the Retail Price Guide. Color Name Refer to measuring instructions in the Retail Price Guide to determine proper size and depth. The Dust Cap is optional with an IB (inside) mount. All OB (outside) mounts will be made with a dust cap. Special Instructions (Specify Line Number) OB - over IB Product IB - 2 or 2 1/2 Blinds IB - Other Products Type 2-1 block / key Type 3-2 block / key Type 4-3 block / key Type 5-4 block / key OB - Standard Type 1 1 Blinds 2 Blinds 2 1/2 Blinds Vertical Blinds Roller Shades Woven Wood Shades Standard Headrail Woven Wood Shades Simple Ascent HR Woven Wood Shades Twin Headrail Cellular / Pleated Shades Treanna Window Shading Vertical Cellular Panel Track 2-3 Channel Panel Track 4-5 Channel Return Size Dust Cap Depth Dust Cap Y or N
Order Forms DH-29
DH-30 Drapery The ADO Collections Skandia Window Fashions and ADO have teamed up to provide you with unique fabrics with combinations of window treatments for those who seek the best in design. ADO Corporation is a German based manufacturer of fine drapery fabrics and window covering products made of the highest quality materials and workmanship. ADO has developed a worldwide reputation as an innovator with the highest quality fabrics featuring fabric by the yard, draperies, Roman shades, ADOwrap (sheer vertical tracks), and ADOglide (sliding panel tracks). Draperies available in French Pleat, Bohemian and Goblet Pleat, Rod Pocket, Grommet and Ripplefold Soft shades styles include Hamilton (flat Roman), Mathis (back slat Roman), Chandler (front slat Roman), Wofford (waterfall), Addison (shirred balloon), Albany (relaxed Roman), Weston (butterfly Roman), Sommerset (slouch Roman), and Concord (hobbled Roman). Top treatments are available in board-mounted styles, such as Carolina, Hannah (traditional swag) and rod-mounted swags, as in Charleston (with one cascade), Emily (overlapping swag), Madison (a pointed bell swag), Savannah (a rounded swag without cascades). ADOwrap is a vertical blind with ADO sheer fabric as a treatment to cover the vanes. ADOglide is a panel track product that combines fabric panels with a track system. Other styles, fabrics, options and retail pricing are available. Please contact Custom Service or your District Sales Manager to find out more.