Software Release M2.7 Summary for the Notifier AM2020/AFP1010 Fire / Security Control Panels, Including NOTI FIRE NET and Peripherals

Similar documents
Laptop / PC Programming Manual

Network Display Unit Installation Instructions

AM2020 AFP1010 CHAPTER TWO OPERATION

Panel Remote Annunciators Installation Instructions

AFP-300/400 OPERATORS MANUAL INTELLIGENT FIRE DETECTION AND ALARM SYSTEM SOFTWARE VERSION 2.2 REVISION AUS 3

AFP-400 Analog Fire Panel MEA E. City of Chicago Class 1: 1291E Class 2: 1792E GENERAL FEATURES. A Pittway Company

D8024, D9024, D10024 Analog Fire Alarm Control Panels Programming Guide

Section 4: Operating Instructions

DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

PEGAsys. Multi-Loop Intelligent Suppression Control System FEATURES DESCRIPTION. Effective: March 2007 K

DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

ANNUNCIATOR FIXED MODULE

Fire Operator Workstation (Fire OWS) User s Guide

TrueAlarm Fire Alarm Controls

The System 5000 Operating Manual

CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM

AFP-300/AFP-400 Analog Fire Panel

The ACM-8R Annunciator Control Module

Control Panel. 1.0 GENERAL SCOPE OF WORK Introduction... 2

TrueAlarm Fire Alarm Systems

IntelliKnight 5820XL Addressable Fire Alarm Control System Sales Guide

A World of Solutions

Fire Alarm Control Panel AM2020/AFP1010. Document /22/99 Rev: P/N 15088:J ECN

HS-5100, HS-5200, HS-5400 ANALOGUE ADDRESSABLE CONTROL PANELS. User Manual. Approved Document UI-ELAN-02 Revision 03

/9308 External Battery Chargers Installation Instructions

intelligent fire alarm ID60series panels

LDM Series Lamp Driver Modules For Graphic Annunciation and Control

The EN54 Part 2, 4 and 13 Fire System

A World of Solutions in Fire Protection Systems

Intelligent Security & Fire Ltd

SECTION FIRE ALARM STANDARDS REVISED CONSTRUCTION STANDARD

Addressable Fire Alarm Control Panel

Control/Communicator

LifeAlarm Fire Alarm Control Panels

FieldServer Driver - Serial FS Notifier NCA

FIRE ALARM SYSTEM 1.1 GENERAL REQUIREMENTS

Operation Manual Fighter ProVision Software. Version: 0.0 Revision: 1

EIA-232D Protocol And Data Formats for the AFP-200 Fire Alarm Control Panel

The ID51 & ID52 can be upgraded to 2 loops without the need to change back box. FEATURES. Intelligent Features

Fire System Objects. Introduction Page *3. Engineering *17. Data Base Generation *43

ZX1e ZX2e ZX5e. Document No Issue 01 user manual

FieldServer Driver - Serial FS Grinnell TFX Minerva

PS-Tools. User s Guide for the 50 Pt Addr Panel

Mircom FX /01/16

Fire Alarm Control Panel AFP Programming Manual. Australia Edition. Document DOC Rev: E 11/12/2018 ECN:

Security Escort. Operations Guide. Security Escort

MODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description

ID50series. intelligent fire alarm panels

The TC-4F. Time Control Module C P/N 15972:C ECN For the Sensican 2000 Fire Alarm Control Panel

MS Rev. 2/DACT-UD: Intelligent Addressable FACP with Optional 2nd Loop

PN 50257:E ECN NOTI FIRE NET. Manual. Document 50257:E 7/5/01 Rev: E. Technical Manuals Online! -

INTELLIGENT FIRE ALARM CONTROL PANEL

NetSOLO Broadband. Voice Evacuation. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System

The supplier and installer of the system should be approved by the local civil defence authority.

1.1 The Network Communications Module for Wire (NCM-W) Channel A & B Connections. Network Connection Ports (NUP)

E3 Series Broadband System

TECHNICAL DATA OBSOLETE

THE "SS90" SERIES RELEASE DEVICES MODEL B2 INSTALLATION MANUAL

PWGSC Ontario MULTIPLEX FIRE ALARM SYSTEM Sect Region Project Page 1 Number R

C. The Network shall be an IP based Ethernet architecture suitable for long range use on fiber optic media or wire media using VDSL technology.

MR-2602 Two Zone Fire Alarm Control Panel

Data Sheet Fire Safety & Security Products. System Overview. Initiating Circuits SXL-EX FACP 7906

Network Hardware and wiring (quiz)...

Contact ID as of 2/2/2015

MODEL B2 INSTALLATION MANUAL

AXI LED USER MANUAL (REV. 1.0)

FAST, INTELLIGENT FIRE ALARM SYSTEMS THAT DELIVER IT ALL

ZP2 Series Operation Manual

FIREFLY II PLUS RELEASE DEVICES INSTALLATION MANUAL

Supplement to the AM2020/AFP1010 Voice Alarm Multiplex Manual Number 15889, Revision F1, dated 12/11/97

Understanding the Code Pad lights...4. Code Pad tones...5. Fully arming the system On MODE...6. Fully arming the system - Quick Arm MODE...

ONYXWORKS AND FIRSTVISION. Version 4

Data/ Specification Sheet

Intelligent addressable fire alarm control panel

ZM2 OPERATING AND MAINTENANCE INSTRUCTIONS

Vigilant MX4428 Fire Alarm System

The EN54 Part 2 & 4 Fire System

E3 Series Broadband. Description. Features. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System

ZXe INTELLIGENT MULTI PROTOCOL FIRE ALARM CONTROL PANEL

0 4 / 0 4 / 1 4. GE Concord 4 Quick User Guide. GE Concord 4 Quick User Guide Page 1

Operating instructions SENTRI4 Control panel based Fire detection and alarm system

4100U City and Relay Cards Installation Instructions

Installation Guide. Bacharach HGM300 to LonWorks FT-10 Communications Adapter

DS7400Xi Addressable Control/ Communicator

Fire Alarm Control Panel AFP Operations Manual. Australian Edition. Document DOC /11/2015 Rev: P/N DOC :B

Multi-Point Peripherals

Consultant Specification AGILE Wireless Fire Detection System

Operating Instructions MEW01349 Revision -

Fire Control Panels. Addressable Fire Detection and Control Basic Panel Modules and Accessories. UL, ULC, CSFM Listed; FM, NYC Fire Dept Approved*

Planning Instructions MEW01776 Revision -

First Alert 1200C Installer Notes M. Leuck

MS-4012/4024 and CMS-4012/4024. Instruction Manual for the. Fire Alarm Control Panels

Y-Plant Alert. Alarm Annunciator and Sequence of Event Recording System. BU 04M01A02-01E-A

Control/Communicator Installation Manual

HILLS Series LED Code Pad User Manual

Annunciator Modules. for Fire Lite Fire Alarm Control Panels. Document # /30/95 Revision:

FIRE FIRE. 4100U Fire Alarm. Operator's Manual. Technical Manuals Online! -

ALARMS Fire Alarm Priority 2 Alarm. Fire Alarm Priority 2. Ack Event Time Enable Disable Emergency Operating Instructions.

FA-300 Series. LED Fire Alarm Control Panel. User Guide. FA-300 SERIES Fire Alarm Control Panel. FA-300 SERIES Fire Alarm Control Panel

NFS-3030/E. Fire Alarm Control Panel. Programming Manual. Technical Manuals Online! -

Transcription:

12 Clintonville Road Northford, CT 0642-1610 203-484-161 FAX: 203-484-118 Software Release M2. Summary for the Notifier AM2020/AFP1010 Fire / Security Control Panels, Including NOTI FIRE NET and Peripherals AROM2.M, A1ROM2.M, & NROM2.M Export This document covers Release M2. Software kits as they affect the following systems and modules: AROM2.M-AMG AROM2.M-AMGX4 AROM2.M-AMGZC AROM2.M-AMGZCF AROM2.M-CPU A1ROM2.M-CPU AROM2.M-DIAFR A1ROM2.M-DIAFR AROM2.M-DIASP A1ROM2.M-DIASP AROM2.M-LIB AROM2.M-LIB2 AROM2.M-LIB4 AROM2.M-SIB AROM2.M-XPP AROM2.M-XPSC NROM-INAFR2.M NROM-INASP2.M NROM-NAM2.M NRTDISKSP-2.M CAUTION - System Reacceptance Test after Software Changes: To ensure proper system operation, this product must be tested in accordance with NFPA 2-1993 Chapter after any programming operation or change in site-specific software. Reacceptance testing is required after any change, addition or deletion of system components, or after any modification, repair or adjustment to system hardware or wiring. All components, circuits, system operations, or software functions known to be affected by a change must be 100% tested. In addition, to ensure that other operations are not inadvertently affected, at least 10% of initiating devices that are not directly affected by the change, up to a maximum of 50 devices, must also be tested and proper system operation verified. Document 50659 08/0/9 Revision: A P/N 50659:A1 ECN 9-304

Inventory List The following replacement ROMs must be ordered individually according to your system requirements. AROM2.M, A1ROM2.M, and NROM2.M cannot be used in conjunction with earlier ROMs. All system ROMs must be upgraded at the same time. (See Compatibility Warning) AROM2.M-AMG (for standard AMG operation at Annunciator address 29, 30, 31, or 32) AROM2.M-AMGX4 (for use with 5th through 8th AMG in one system at Annunciator address 25, 26, 2, or 28) AROM2.M-AMGZC (for zone coded AMG operation occupying addresses 2, 3, 4, and 5) AROM2.M-AMGZCF (for zone coded AMG operation occupying addresses 2, 3, 4, and 5) AROM2.M-CPU Includes: EPROM for CPU-2020 Document # 1533 "The AM2020/AFP1010 Operator's Instructions" A1ROM2.M-CPU Includes: EPROM for CPU-2 Document # 1533 "The AM2020/AFP1010 Operator's Instructions" AROM2.M-DIAFR Includes: EPROM for DIA-2020FR DIA-2020FR Label AROM2.M-DIASP Includes: EPROM for DIA-2020SP DIA-2020SP Label A1ROM2.M-DIAFR Includes: EPROM for DIA-1010FR DIA-1010FR Label 2 50659-A 12/19/96 DIA-1010FR #DFR1M2. DIA-1010FR Label installed in the AFP1010 DIA-1010 Assembly. Place this 1010 door during installation of the A1ROM2.M-DIAFR. E PROM PART # AROM2.M-AMG 3284 AROM2.M-AMGX4 3295 AROM2.M-AMGZC 3529 AROM2.M-AMGZCF 3534 AROM2.M-CPU #CPU M2. A1ROM2.M-CPU #CPU1M2. AROM2.M-DIA FR # DFR2M2. AROM2.M-DIA SP # DSP2M2. A1ROM2.M-DIA FR # DFR1M2. A1ROM2.M-DIA SP # DSP1M2. AROM2.M-LIB # LIB M2. 1 AROM2.M-LIB2 # LIB4M2. 1 AROM2.M-LIB4 # LIB4M2. 1 AROM2.M-SIB #SIB M2. AROM2.M-XPP 336 AROM2.M-XPSC 33 NROM-INA FR2.M # IFR M2. NROM-INA SP2.M # ISP M2. NROM-NAM2.M #NAM M2. #AFP2M2. NRTDISK SP-2.M # NSP M2. EPROM Part Number List Field Change Procedure for the Notifier AM2020, AFP1010, and AFP-200 Fire Alarm Control Panels, NOTI FIRE NET and Peripherals Software (ROM) Upgrade This procedure outlines the mechanical installation steps required to install AROM(n), ROM(n), NROM(n), VROM- (n), VRAM-1 and XRAM-1 chips in AM2020, AFP1010, AFP-200, NAM-232, NOTI FIRE NET and XP Transponder system boards Field Change Procedure Document # 1544 provides instructions for mechanical replacement of the ROMs. DIA-2020FR #DFR2M2. DIA-2020FR Label installed in the AM2020 DIA-2020 Assembly. Place this 2020 door during installation of the AROM2.M-DIAFR. J

A1ROM2.M-DIASP Includes: EPROM for DIA-1010SP DIA-1010SP Label AROM2.M-LIB Includes: EPROM for LIB-200 AROM2.M-LIB2 Includes: EPROM for LIB-200A AROM2.M-LIB4 Includes: EPROM for LIB-400 AROM2.M-SIB Includes: EPROM for SIB-2048A/SIB-NET AROM2.M-XPP Includes: EPROM for XPP-1 Document # 15888 "The XP Series Transponder System" DIA-1010SP #DSP1M2. DIA-1010SP Label installed in the AFP1010 DIA-1010 Assembly. Place this 1010 door during installation of the A1ROM2.M-DIASP. DIA-2020SP #DSP2M2. DIA-2020SP Label installed in the AM2020 DIA-2020 Assembly. Place this 2020 door during installation of the AROM2.M-DIASP. AROM2.M-XPSC (For use in Canada when the second stage evacuation signal must be activated steadily, not at 120 PPM.) Includes: EPROM for XPP-1 Document # 15888 "The XP Series Transponder System" Document # 50190 "Addendum to the XP Series Transponder System" NROM-INAFR2.M Includes: EPROM for INA Document #1544 NROM-INASP2.M Includes: EPROM for INA Document #1544 "Field Change Procedure" "Field Change Procedure" NROM-NAM2.M Includes: EPROM for NAM-232 EPROM for AFP-200 Document # 50038 "NAM-232 Manual" Document # 15511 "AFP-200 Manual" NRTDISKSP-2.M Includes: 3½" Floppy Disks for NRT Note: The NRT floppy disks contain software which is already installed on the NRT system hard drive. These disks are provided as a backup only. 50659-A 12/19/96 3

Compatibility Warning Software Combinations - All software part numbers are not compatible with each other. Improper mixing of software part numbers may compromise Life Safety functions. If in doubt about the compatibility of a particular software combination, consult the factory. CGAS, AMNET, AUTOPLEXOR, and VGAS/UNINET - This software release is not compatible with earlier versions of CGAS, AMNET, AUTOPLEXOR, and VGAS/UNINET systems. Software in these items must be upgraded for compatibility. Note: INA software and NRT software are not compatible with CGAS, AMNET, AUTOPLEXOR, and VGAS/UNINET software. 4 50659-A 12/19/96

Previous NOTI FIRE NET Software Releases (The following features are included in the current software release) AM2020/AFP1010 Features: INA Features: NRT Features: AROM6N/A1ROM6N (Revision A-C) AROM1-INA (Revision A-C) NFPA Style 4 (Class B) Network Node NFPA Style 4 (Class B) Network Node SLC Connections SLC Connections High and Low MIB Threshold Settings Network-Wide Event Acknowledgment, Internode Wiring Ground Fault Detection Reset, and Signal Silence Capability 400 Event Nonvolatile History Buffer AROM6N/A1ROM6N (Revision D-E) Local Real Time Clock Cooperative Control-By-Event Printer and CRT Interface Receiving Mode Disabled Lamp Test Internal and External Power Supply AROM6N/A1ROM6N (Revision F) Options Enable/Disable from NRT Two Password Levels High and Low MIB Threshold Settings Internode Wiring Ground Fault Detection NROM-2.0/N1ROM-2.0 (Revision G) NROM-2.5/N1ROM-2.5 (Revision A-C) Individual Alarm Acknowledgment Style for Wire Medium NVRAM Memory Check Synchronization of Clocks AROM1-INA (Revision D-F) Receiving Mode Disabled NROM-INA2.0 (Revision G) NROM-INA2.5 (Revision A-C) Individual Alarm Acknowledgment Style for Wire Medium NVRAM Memory Check Synchronization of Clocks ACS Annunciators NAM Features: NROM-NAM2.5 (Revision A) NFPA Style 4 (Class B) Network Node SLC Connections Style for Wire Medium High and Low MIB Threshold Settings Internode Wiring Ground Fault Detection Individual Alarm Acknowledgment, Block Trouble Acknowledgment, Signal Silence, and Reset Capability. CCBE Zone Output Global Manual Evacuate NRT (Revision A-C) NFPA Style 4 (Class B) Network Node SLC Connections Command Center with Network-Wide Event Acknowledgment, Reset, and Signal Silence Capability System (Subset of Network Nodes) with Block Acknowledge, Reset, and Signal Silence Capability 65 Event Display History Buffer Nonvolatile History File (Number of Events Revision Limited by Disk Space Only) Microsoft Windows 3.1 Based Operating System System Interface Window History Buffer/Viewer Window Graphic Presentation Window Memo Window Help File Mouse/Touch Screen Support 13 and 19-inch Monitors Three Password Levels High and Low MIB Threshold Settings Local Real Time Clock Vectored Graphics (305 Only) NRTDISK2.0(-G) (Revision D-E) Receiving Mode Disabled NRTDISK2.0(-G) (Revision F-G) Point Enable/Disable Command Print History Files NRTDISKG-2.5 (Revision A-C) Individual Alarm Acknowledgment Style for Wire Medium Control On/Off Increased Capability Passwords Programmable Alarm/Trouble Tones Logging of Programming/Manual Stage Change Synchronization of Clocks 50659-A 12/19/96 5

Previous AM2020 Software Releases (The following features are included in the current software release) ROMSC1-2020 ISIB Isolation Enhanced Time / Date Input Format Annunciators Keyboard Operation &Terminal Supervision CGAS, AMNET, & AUTOPLEXOR Disabling the Piezo Sounder Compatibility Warning Enhanced READ STATUS Options History Mode Finding the Parentheses Keys Disable Latching LEDs on the SLC Loop Control Self-Restoring Initiating Device Troubles Signal Silence / Signal Cut-Out Times Peripheral Communication Rate Local Mode Signal Silence Operation ROMSC2-2020 Type I.D.s Enhanced Read Status Option Time / Date System and Point Status Reports PRN-2 Paper Out/Off-line Terminal Status Line Enabling NFPA Detector Sensitivity Selection Terminal Beep Initiating Device Tracking Option AROM5 (Rev A) Software Type I.D. Grouping Event-Pending Software Types Battery Charger Control CPU/DIB Communications Failure Signal Block Acknowledge P-80 Printer Troubleshooting Tip Control-By-Time Control Module Reporting ROMSC3-2020 (Rev A) Day/Night Sensitivity Maintenance Alert Device Blink Low Chamber Value Disabled Zones ROMSC3-2020 (Rev B & C) Event Reminder Maintenance Alert Expanded Read Status Functions Low Chamber Value Expanded Status Line Display Monitor Capacity Expanded User Reports LED Latching ROMSC3-2020 (Rev D) Local Printer Maintenance Alert New Type I.D.s Low Chamber Value NIB-96 Trouble Reporting Display Monitor Capacity Non-Alarm Module Reporting Hardware / Software Compatibility Periodic Detector Test AROM-4 (Rev A - F) Prior / Next / Autostep Keys AMG-1 Address Change Remote Page ALL CALL Function Upload / Download of AM2020 Programming AMG-1 Functions Verification Counter Reset Dual Stage Operation (Canada Only) Walk Test XPP-1 Relay Mapping Change Non-Latching Inputs AROM5 (Rev B & C) Zone Coded Synthesized Chime Zone Coded Voice (Male) AROM5 (Rev D - F) New AMG Boards AROM5 (Rev G - I) NFPA 2-1993 Chapter 6 Sensitivity Calibrated Test Drift Compensation Manual Reset of Automatically Activated Control Modules AROM6N (Rev A & B) Selectable Drift Compensation UL106 / UL1610 Security AROM6N (Rev C - F) Revised Standard for DACT Operation AROM6N (Rev G & H) Zone Coded Voice (Female) AROM6.5N (Rev A & B) Rapid XP Transponder All Call Rapid Polling Algorithm Pre-Alarm Option Remote Terminal Mode Supervisory Type I.D. Piezo Disabled During Alter Status Programming Pager Mode AROM6.5N (Rev B - D) Canadian Upgrade Kit AROM6.5N-XPSC provides steady second stage evacuation signal AROM6.6N (Rev A) Printer Trouble Inhibit Universal Digital Alarm Communicator Transmitter 6 50659-A 12/19/96

Previous AFP1010 Software Releases (The following features are included in the current software release) A1ROM5 (Rev A) Battery Charger Control Block Acknowledge Control-By-Time Control Module Reporting Day / Night Sensitivity Device Blink Disabled Zones Event Reminder Expanded Read Status Functions Expanded AMG Addressing Expanded Status Line Expanded User Reports LED Latching Local Printer New Type I.D.s NIB-96 Trouble Reporting Non-Alarm Module Reporting Periodic Detector Test Prior / Next / Autostep Keys Remote Page Verification Counter Reset Walk Test Zone Coded Synthesized Chime Zone Coded Voice (Male) A1ROM5 (Rev B) New AMG Boards A1ROM5 (Rev C - E) NFPA 2-1993 Chapter 6 Sensitivity Calibrated Test Drift Compensation Manual Reset of Automatically Activated Control Modules. A1ROM6N (Rev A) Selectable Drift Compensation UL106 / UL1610 Security A1ROM6N (Rev B - E) Revised Standard for DACT Operation A1ROM6N (Rev F & G) Zone Coded Voice (Female) A1ROM6.5N (Rev A & B) Rapid XP Transponder All Call Rapid Polling Algorithm Pre-Alarm Option Remote Terminal Mode Supervisory Type I.D. Piezo Disabled During Alter Status Programming Pager Mode A1ROM6.5N (Rev B - D) Canadian Upgrade Kit AROM6.5N-XPSC Provides Steady Second Stage Evacuation Signal A1ROM6.6N (Rev A) Printer Trouble Inhibit Universal Digital Alarm Communicator Transmitter 50659-A 12/19/96