StreetPrint Applicator Program Integrated Paving Concepts Inc. makers of tooling / templates / infrared equipment for decorative stamped asphalt
StreetPrint Applicator Program Established in 1992 Integrated Paving Concepts has been the industry leader in decorative stamped asphalt and patterned paving products. Manufacturers of StreetPrint asphalt stamping templates, StreetHeat - asphalt infrared reheat equipment, tooling and asphalt coating sprayers. The name StreetPrint and our StreetPrint logo is protected by registered trademarks. Integrated Paving Concepts Inc. is the owner of all trademarks and the use of the StreetPrint name and logo can only be lawfully used by those licensed by Integrated Paving Concepts Inc. Our Brands StreetPrint asphalt stamping templates are hand welded with unique 3/8 swayged wire for better longevity. StreetHeat asphalt infrared reheat equipment has innovative reciprocating heater banks that allows the use of efficient, high-intensity true IR stainless steel alloy heaters to reheat asphalt surfaces without damage as well as to melt thermoplastics. StreetPrint Applicator Program Integrated Paving Concepts Inc. licenses qualified applicants to use the StreetPrint process as well as the StreetPrint name and logo, subject to the terms and conditions of our Applicator agreement. There is no license fee. However, to become qualified applicants must sign our StreetPrint Applicator Agreement which has the following major features: Benefits Recognized as a qualified Applicator of StreetPrint as is sometimes required within specifications by others. Entry into online Applicator Lookup on the www.streetprint.com website The right to market under the StreetPrint Brand used in over 40 countries world wide. Purchase of Genuine StreetPrint Start-Up kit To become an Applicator you must make an initial purchase of one Integrated Paving Concept s start-up packages or your choice of genuine StreetPrint templates and StreetHeat equipment. All StreetPrint projects must be completed using genuine materials as sold by Integrated Paving Concepts Inc. and use only the authorized products, as determined by IPC, in conjunction with the Processes and the Marks. 2-Year Renewable License Our Applicator Agreement licenses your use of StreetPrint for a 2-year term. Should you continue to observe the provisions of the Applicator Agreement throughout this term, you have the right to continue as an Applicator on a 2-year renewal basis. No Territorial Restrictions This is not a franchise and StreetPrint Applicators are not restricted by territory. Once licensed, you may perform StreetPrint work in any location within North America. The StreetPrint Applicator Agreement, prepared for your signature will be forwarded to you after receipt of your Ordering Information as outlined in this booklet.
Applications & Training Decorative Residential Driveways & Accents Crosswalks Pedestrian Walkways & Sidewalks Plazas Intersections Traffic Calming Parking Lots Storefronts & Entranceways *Coating Products sold separately by others, and may have certification requirements for purchase and installation. Infrared Heater StreetPrint Plate + + Template Compactor = Training & Support Complete the online StreetPrint Training Guide at www.streetprint.com and submit results to Integrated Paving for evaluation and review. OR Contact Integrated Paving Concepts for assistance in arranging live training on your jobsite. Training is a chargeable service at a daily rate in addition to travel and accommodation expenses.
Thermoplastics & Repair Melting Thermoplastic with StreetHeat Integrated Paving Concepts StreetHeat heating equipment can also be used for melting decorative thermoplastics, road markings and small asphalt repair. Surface Applied Thermoplastic Inlaid Thermoplastic *Thermoplastic products sold separately by others, and may have certification requirements for purchase and installation. Pothole Repair Road Markings
StreetHeat StreetPrint Equipment StreetHeat SR-120, SR-60 and SR-20 Pavement Heaters The purchase of StreetHeat equipment is the initial step in becoming an StreetPrint Applicator. The optional Start-Up Kits provide you with the necessary tooling and equipment to successfully install StreetPrint projects of varying size, scope and complexity. Depending upon the specific kit, the following equipment may be included: StreetHeat SR-120 The SR-120 is the largest model in the SR series of asphalt reheat equipment. Designed specifically for thermoplastics in large areas and crosswalks. Using the same reciprocating technology and features as the SR-60, the SR-120 offers a greater heating area of 130ft2 (10ft x 13ft) (12m2 3.05m x 3.96m). * full lane width heating * electronic control panel * variable heating banks & powered wings * offset heaters to eliminate cold seams * self-propelled *easily maneuverable * Heat Soak function * adjustable heater camber * lightweight * proven design
StreetHeat StreetPrint Equipment StreetHeat SR-60 The SR-60 is the flag ship model that started the SR series of reheat equipment. The proven design of the SR -60 employs an innovative reciprocating infrared heater bed that allows the use of efficient, high-intensity true IR stainless steel alloy heaters to reheat the asphalt surface as well as melt thermoplastics. Features a gentle reciprocating heat with a heating area of 60 ft² (6.5ft x 9ft) *5.57m2-1.98m x 2.74m+. StreetHeat SR-20 The SR-20 is the most maneuverable pavement heater in the StreetHeat family. It has always been the optimal device for heating borders, corners, narrow strips and perimeters of uncommon shapes. It now gives the user the ability to heat 18 inch / 45.7 cm areas or by rotating the heater bank, 3 ft / 91.4 cm areas. Design for various applications including : * residential driveways * commercial parking lots * crosswalks * entranceways * pedestrian spaces * level medians Features * fully automated controls * adjustable heater camber * easily maneuverable * heat soak function * lightweight * proven design SR-20 is designed for situations where the layout of the pavement surface will not allow for efficient use of the SR-60. The SR-20 is ideal for heating areas such as borders and tight curves and driveways and accents. The SR-20 is the perfect tool for heating borders, and now you can rotate the heaters and run dual propane tanks, that offers even greater heating and melting exibility. * SR-20 includes an attached StreetHeat Jet Heater
Standard StreetPrint Tooling Equipment StreetHeat Portable Jet Heater The StreetHeat Portable Jet Heater is designed to deliver supplemental heat for touch ups. Its flexibility allows for excellent reheating of small areas for imprinting, completing asphalt repairs and preparing cold seams. The StreetHeat uses 1/3 less propane compared to conventional torches. Infrared Thermometer (C⁰ or ⁰F) This non-contact thermometer senses the energy of an object with an infrared detector. It measures surface temperature quickly and accurately. Easy to use: just point, shoot and read. Readings are shown in digital display. This portable, battery operated thermometer keeps a safe distance between you and the heat source and measures 18 to 400 C (0 to 750 F). Comes with a black case. Hand Held Finishing Tools The hand held finishing tool allows you to perform minor touch ups on an imprinted surface. StreetPrint Electric Hammer Finishing Bits StreetPrint Finishing Bits are sold individually. The electric hammer is not included and must be obtained separately. Finishing bits are to be used in place of the hand held finishing tool; they are not meant for continuous use.
StreetPrint Templates Equipment & Patterns Integrated Paving Concepts has over 20 + templates to choose from. Templates patterns shown below are samples of our most commonly used templates by our StreetPrint Applicators. Custom templates are also available. For more information on our template catalogue visit www.streetprint.com Herringbone Ashlar Slate Offset Brick Random Slate BORDERS TEMPLATES Stacked Brick Cobble Border Double Stacked Border End to End Border Texas Cobble Border Soldier Course Border
StreetPrint Templates Equipment & Patterns ACCENT TEMPLATES Interchangeable Accents Wheel Chair Numbers & Letters Cyclist Hopscotch
Integrated Paving Concepts Inc. Corporate Head Office Suite 102 17957 55th Avenue Surrey, BC V3S 6C4 Canada U.S. Mailing Address PMB 48 936 Peace Portal Drive Blaine, WA 98230-4040 USA Telephone Toll Free in USA and Canada 1 (800) 688 5652 Telephone (604) 574 7510 Fax (604) 574 7520 Email info@streetprint.com www.streetprint.com