International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 June to 30 June 2012 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 /CD 17325-1 TC 17 /CD 16573 TC 20 /CD 16699 TC 22 /CD 3468 /CD 16505 /CD 6469-4 /CD 17409 /CD 23828 TC 25 /DTR 16078 TC 34 /CD 16649-3 TC 37 /CD 24617-4 Ships and marine technology Ships and marine technology Marine environment protection Part 1: Oil spill booms Design Criteria Steel Method for evaluation of hydrogen delayed fracture resistance of high strength steels Aircraft and space vehicles Space systems Disposal of orbital launch stages Road vehicles Passenger cars Windscreen defrosting and demisting systems Test method Road vehicles Ergonomic and performance aspects of Camera-Monitor Systems Requirements and test procedures Electrically propelled road vehicles Safety specifications Part 4: Post crash electrical safety requirements Electrically propelled road vehicles Connection to an external electric power supply Safety requirements Fuel cell road vehicles - Energy consumption measurement Vehicles fuelled with compressed hydrogen Cast irons and pig irons Cast Irons - Classification and designation of casting imperfections Food products Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-Dglucuronide Terminology and other language and content resources Language resource management Semantic annotation framework (SemAF) Part 4: Semantic roles (SemAF-SRL)
TC 38 /CD 3074 TC 39 /CD 17543-1 TC 43 /CD 16254 TC 44 /CD 23277 /CD 23278 /CD 15614-7 /CD 15614-8 TC 45 /CD 17257 /DTS 17796 /CD 1434 TC 46 /CD 21127 TC 59 /CD 6707-2 TC 61 /CD 15512 /CD 17223 TC 67 /DTR 19905-2 TC 68 /CD 12812-1 TC 94 /CD 17493 TC 106 /CD 24234 /CD 7494-2 Textiles Wool Determination of dichloromethane-soluble matter in combed sliver Machine tools Machines tools Test conditions for accessory spindle heads Part 1: Horizontal spindle machines Acoustics Measurement of minimum noise emitted by road vehicles Welding and allied processes Non-destructive testing of welds Penetrant testing of welds Acceptance levels Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding Specification and qualification of welding procedures for metallic materials Welding procedure test Part 8: Welding of tubes to tube-plate joints Rubber and rubber products Rubber Identification of polymers Pyrolytic gas-chromatographic method using mass-spectrometric detection Rubber Qualitative determination of vulcanization-fume composition by thermodesorption and gaschromatographic/mass-spectrometric analysis Natural rubber in bales Amount of bale coating Determination Information and documentation Information and documentation A reference ontology for the interchange of cultural heritage information Buildings and civil engineering works Building and civil engineering Vocabulary Part 2: Contract terms Plastics Plastics Determination of water content Plastics Determination of yellowness index and change in yellowness index Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 2: Jack-ups commentary and detailed sample calculation Financial services Mobile Financial Services Part 1: General framework Personal safety -- Protective clothing and equipment Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven Dentistry Dentistry Mercury and alloys for dental amalgam Dentistry Dental units Part 2: Water and air supply
/CD 9687 TC 108 16063-22:2005/CD Amd 1 TC 127 /CD 17253 7135:2009/CD Amd 1 TC 130 /CD 15341 TC 145 7010:2011/CD Amd 170 TC 150 /CD 13175-1 TC 156 /DTR 16335 TC 161 Dental equipment Graphical symbols Mechanical vibration, shock and condition monitoring Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer Amendment 1 Earth-moving machinery Earthmoving machines and RTT Design requirements for circulation on the road Earth-moving machinery Hydraulic excavators Terminology and commercial specifications Amendment 1 Graphic technology Graphic technology Method for Radius Determination of Printing Cylinders Graphical symbols Graphical symbols Safety colours and safety signs Registered safety signs Amendment 170: Safety sign M047: Use self-contained breathing appliance Implants for surgery Implants for surgery Calcium phosphates Part 1: Hydroxyapatite powders Corrosion of metals and alloys Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification Control and protective devices for gas and/or oil burners and appliances /CD 23551-6 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 6: Thermoelectric flame supervision devices TC 163 /CD 9972 TC 165 /CD 13910 TC 190 /CD 16558-1 /CD 16558-2 /CD 17182 /CD 14858 TC 206 /CD 17095 TC 209 /CD 14644-12 TC 215 /DTS 13582 Thermal performance and energy use in the built environment Thermal performance of buildings Determination of air permeability of buildings Fan pressurization method Timber structures Timber structures - Strength graded timber - Test methods for structural properties Soil quality Soil quality Risk based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) Soil quality Risk-based petroleum hydrocarbons Part 2: Determination of aliphatic and aromatic fractions of semivolatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) Soil quality Determination of some selected phenols and chlorophenols Gas chromatographic method with mass spectrometric detection Soil quality - Environmental availability in soil Use of soil extracts for the assessment of trace element bioavailability Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for interfacial bond strength of ceramic materials at elevated temperatures Cleanrooms and associated controlled environments Cleanrooms and associated controlled environments Part 12: Classification of air cleanliness by nanoscale particle concentration Health informatics Health Informatics Sharing of OID registry information
/CD 17583 IEC/DTR 80001-2- 4 TC 242 /CD 50002 JTC 1 /IEC PDTR 29181-4 /IEC PDTR 29181-6 /IEC PDTR 29181-7 /IEC CD 24727-1 /IEC CD 30100-3 /IEC CD 17922 /IEC CD 18014-4 /IEC CD 27038 /IEC PDTS 30104 /IEC CD 30111 /IEC CD 20006-1 /IEC CD 20006-2 /IEC PDTR 29195 /IEC CD 17788 Health informatics Terminology constraints for coded data elements expressed in Harmonized Data Types used in healthcare information interchange Application of risk management for IT-networks incorporating medical devices Part 2-4: General implementation guidance for Healthcare Delivery Organizations Energy Management Energy audits Information technology Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 4: Mobility Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 6: Media Distribution Telecommunications and Information Exchange Between Systems Future Networks: Problem Statement and Requirements Part 7: Service Composition Identification cards Integrated circuit card programming interfaces Part 1: Architecture Interconnection of information technology equipment Home network management Part 3: Management applications Telebiometric authentication framework using biometric hardware security module (ITU-T X.bhsm /IEC xxxxx) Information technology Security techniques Time-stamping services Part 4: Traceability of time sources Information technology Security techniques Specification for Digital Redaction Information Technology Security Techniques Physical Security Attacks, Mitigation Techniques and Security Requirements Vulnerability handling processes Information Technology for Learning, Education and Training Information Model for Competency Part 1: Competency General Framework and Information Model Information Technology for Learning, Education and Training Information Model for Competency Part 2: Proficiency Level Information Model Passenger Processes for Biometric Recognition in Automated Border Crossing Systems Information Technology Cloud Computing Vocabulary DIS circulated Period from 01 June to 30 June 2012 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown.
* Available in English only Vote terminates TC 8 Ships and marine technology /DIS 24409-2 * Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 2: Catalogue /DIS 24409-3 * Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 3: Code of practice /DIS 16165 * Ships and marine technology Marine environment protection Terminology relating to oil spill response 2012-11-12 2012-11-12 2012-11-22 (Revision of 16165:2001) TC 20 Aircraft and space vehicles /DIS 19631 * Aerospace Tube fittings for fluid systems, 5 000 psi (35 000 kpa) Qualification specification 2012-11-07 /DIS 19632 * Aerospace series Fitting end, 24 internal cone, external thread, flareless type extra fine thread pitch inch series Design standard 2012-11-07 /DIS 22664 * Space data and information transfer systems TC (telecommand) space data link protocol 2012-11-09 (Revision of 22664:2005) /DIS 22667 * Space data and information transfer systems Communications operation procedure-1 2012-11-09 (Revision of 22667:2005) /DIS 22669 * Space data and information transfer systems Space link extension (SLE) Return-all-frames service 2012-11-09 (Revision of 22669:2007) /DIS 22670 * Space data and information transfer systems Space link extension (SLE) Return-channelframes service 2012-11-09 (Revision of 22670:2006) /DIS 26143 * Space data and information transfer systems Space link extension (SLE) Return operational control fields service 2012-11-09 (Revision of 26143:2007) /DIS 16695 Space environment (natural and artificial Earth's internal magnetic reference field models 2012-11-30 TC 22 Road vehicles /DIS 2974.2 * Diesel engines 60 degree female cones for high-pressure fuel injection components 2012-08-06 (Revision of 2974:2005) /DIS 12357-3.2 TC 23 Commercial road vehicles Coupling equipment between vehicles in multiple vehicle combinations Part 3: Strength requirements Tractors and machinery for agriculture and forestry 2012-08-23 /DIS 27850.2 * Tractors for agriculture and forestry Falling object protective structures Test procedures and performance requirements 2012-08-13 10517:2009/DAm d 1 * Powered hand-held hedge trimmers Safety Amendment 1 2012-11-08 /DIS 9912-2 Agricultural irrigation equipment Filters for microirrigation Part 2: Strainer-type filters and disc filters (Revision of 9912-2:1992) /DIS 11783-6 * Tractors and machinery for agriculture and forestry Serial control and communications data 2012-11-28
network Part 6: Virtual terminal (Revision of 11783-6:2010, 11783-6:2010/CD Amd 1) /DIS 15639-1 * Standardization of injection sites for different animal species Part 1: Companion animals (cats and dogs) /DIS 24631-5 * Radio frequency identification of animals RFID transceivers Part 5: Procedure for testing the capability of reading 11784 and 11785 transponders 2012-12-01 2012-12-01 TC 28 Petroleum products and lubricants /DIS 22854 * Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotivemotor gasoline Multidimensional gas chromatography method 2012-11-22 (Revision of 22854:2008) TC 30 /DIS 4064-1.2 Measurement of fluid flow in closed conduits * Water meters for cold potable water and hot water Part 1: Metrological and technical requirements (Revision of 4064-1:2005) 2012-08-15 /DIS 4064-2.2 * Water meters for cold potable water and hot water Part 2: Test methods 2012-08-15 (Revision of 4064-3:2005) TC 34 Food products /DIS 17715 * Flour from wheat (Tricum aestivum) Method for the measurement of damage to starch using an amperometric method /DIS 17718 * Whole meal and flour from wheat (Triticum aestivum) Determination of rheological behaviour as a function of mixing and temperature increase /DIS 16578 * Molecular biomarker analysis General definitions and requirements for microarray detection of specific nucleic acid sequences 2012-09-17 2012-09-17 2012-11-21 TC 42 Photography /DIS 12233 * Photography Electronic still picture imaging Resolution and spatial frequency responses 2012-11-21 (Revision of 12233:2000) /DIS 18902 * Imaging materials Processed imaging materials Albums, framing and storage materials 2012-11-21 (Revision of 18902:2007, 18902:2007/Cor 1:2009) TC 45 Rubber and rubber products /DIS 1629 * Rubber and latices Nomenclature 2012-11-30 (Revision of 1629:1995, 1629:1995/Amd 1:2007) /DIS 11619 * Polyurethane tubing for use primarily in pneumatic installations Dimensions and specification 2012-11-22 TC 58 Gas cylinders /DIS 5145 * Cylinder valve outlets for gases and gas mixtures Selection and dimensioning (Revision of 5145:2004, 5145:2004/Amd 1:2006, 5145:2004/Amd 2:2008) TC 59 Buildings and civil engineering works /DIS 6707-1 * Building and civil engineering Vocabulary Part 1: General terms 2012-11-20 (Revision of 6707-1:2004) TC 61 Plastics /DIS 16396-1 * Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specifications 2012-11-14
(Revision of 1874-1:2010) /DIS 17855-1 * Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications 2012-11-14 (Revision of 1872-1:1993) TC 70 Internal combustion engines /DIS 4548-13 * Methods of test for full-flow lubricating oil filters for internal combustion engines Part 13: Static burst pressure test for composite pressure vessel materials TC 94 Personal safety -- Protective clothing and equipment /DIS 12609-1 * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 1: Specification for products /DIS 12609-2.2 TC 106 * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 2: Guidance for use Dentistry 2012-08-13 /DIS 28888 * Dentistry Screening method for erosion potential of oral rinses on dental hard tissues 2012-11-29 TC 122 /DIS 17451-1.2 TC 123 Packaging * Packaging Numeric Codification of Contents for Electronic Inventories and Manifests of Household Goods and Personal Effects Shipments Part 1: Messaging and coding of inventory numbers, locations and exceptions Plain bearings 2012-11-27 /DIS 3548-1 * Plain bearings Thin-walled half bearings with or without flange Part 1: Tolerances, design features and methods of test 2012-11-02 (Revision of 3548:1999) TC 130 Graphic technology /DIS 12647-1 * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods 2012-11-21 (Revision of 12647-1:2004) /DIS 12647-2 * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes 2012-11-21 (Revision of 12647-2:2004, 12647-2:2004/Amd 1:2007) /DIS 14298 * Graphic technology Management of security printing processes 2012-11-05 /DIS 16759 * Graphic technology Quantification and communication for calculating the carbon footprint of print media products 2012-11-06 TC 145 119 120 121 122 Graphical symbols 119: Safety sign E027: Medical grab bag 120: Safety sign E028: Oxygen resuscitator 121: Safety sign E029: Emergency escape breathing device 122: Safety sign E030: Shipboard safety equipment
123 124 125 126 128 129 130 131 132 133 134 135 136 137 138 139 140 141 123: Safety sign E031: Shipboard general alarm 124: Safety sign E032: Shipboard assembly station 125: Safety sign E033: Door slides right to open 126: Safety sign E034: Door slides left to open 128: Safety sign E036: Lifeboat 129: Safety sign E037: Rescue boat 130: Safety sign E038: Liferaft 131: Safety sign E039: Davit-launched liferaft 132: Safety sign E040: Lifebuoy 133: Safety sign E041: Lifebuoy with line 134: SAfety sign E042: Lifebuoy with light 135: Safety sign E043: Lifebuoy with line and light 136: Safety sign E044: Lifejacket 137: Safety sign E045: Child's lifejacket 138: Safety sign E046: Infant's lifejacket 139: Safety sign E047: Search and rescue transponder 140: Safety sign E048: Survival craft distress signal 141: Safety sign E049: Rocket parachute flare
142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 142: Safety sign E050: Line-throwing appliance 143: Safety sign E051: Two-way VHF radiotelephone apparatus 144: Safety sign E052: Emergency position indicating radio beacon 145: Safety sign E053: Embarkation ladder 146: Safety sign E054: Marine evacuation slide 147: Safety sign E055: Marine evacuation chute 148: Safety sign E056: Survival clothing 149: Safety sign F008: Fixed fire extinguishing battery 150: Safety sign F009: Wheeled fire extinguisher 151: Safety sign F010: Portable foam applicator unit 152: Safety sign F011: Water fog applicator 153: Safety sign F012: Fixed fire extinguishing installation 154: Safety sign F013: Fixed fire extinguishing bottle 155: Safety sign F014: Remote release station 156: Safety sign F015: Fire monitor 157: Saferty sign M037: Close and secure hatches in launch sequence 158: Safety sign M038: Start engine in launch sequence 159: Safety sign M039: Lower lifeboat to the water in launch sequence
160 161 162 163 164 165 166 167 TC 155 11433:1993/DAm d 1 TC 161 160: Safety sign M040: Lower liferaft to the water in launch sequence 161: Safety sign M041: Lower rescue boat to the water in launch sequence 162: Safety sign M042: Release falls in launch sequence 163: Safety sign M043: Start water spray in launch sequence 164: Safety sign M044: Start air supply in launch sequence 165: Safety sign M045: Release lifeboat gripes in launch sequence 166: Safety sign E057: Door opens by pulling on the left-hand side 167: Safety sign E058: Door opens by pulling on the right-hand side Nickel and nickel alloys Nickel alloys Determination of titanium content Diantipyrylmethane molecular absorption spectrometric method Amendment 1 Control and protective devices for gas and/or oil burners and appliances 2012-11-29 /DIS 23553-1 * Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves 2012-11-29 (Revision of 23553-1:2007, 23553-1:2007/Cor 1:2009) TC 163 Thermal performance and energy use in the built environment /DIS 16343 * Energy performance of buildings Methods for expressing energy performance and for energy certification of buildings 2012-11-14 (Revision of /WD 12842) /DIS 16346 * Energy performance of buildings Assessment of overall energy performance 2012-11-14 (Revision of /CD 11368, /WD 12842) /DIS 12571 * Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties 2012-11-15 (Revision of 12571:2000) /DIS 18096 * Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation /DIS 18097 * Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature /DIS 18098 * Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation /DIS 18099 * Thermal insulating products for building equipment and industrial installations Determination of the coefficient of thermal expansion 2012-11-15 2012-11-15 2012-11-15 2012-11-15 /DIS 15758 * Hygrothermal performance of building equipment and industrial installations Calculation of water 2012-11-22
vapour diffusion Cold pipe insulation systems (Revision of 15758:2004) TC 172 Optics and photonics /DIS 11979-7 * Ophthalmic implants Intraocular lenses Part 7: Clinical investigations 2012-11-22 (Revision of 11979-7:2006) TC 190 Soil quality /DIS 13914 * Soil quality Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (HR GC/MS) 2012-11-12 TC 201 /DIS 13424 TC 204 Surface chemical analysis Surface chemical analysis X-ray photoelectron spectroscopy Reporting of results of thin-film analysis Intelligent transport systems 2012-11-14 /DIS 21218 * Intelligent transport systems Communications access for land mobiles (CALM) Access technology support 2012-11-13 (Revision of 21218:2008) /DIS 22839 * Intelligent transport system - Forward vehicle collision mitigation systems - Operation, performance, and verification requirements /DIS 24102-1 * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 1: Local management 2012-11-15 2012-11-02 (Revision of 24102:2010) /DIS 24102-3 * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 3: Service access points 2012-11-02 (Revision of 24102:2010) /DIS 24102-4 * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 4: Station-internal management communications 2012-11-02 (Revision of 24102:2010) /DIS 24102-5 * Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 5: Fast service advertisement protocol (FSAP) 2012-11-02 (Revision of 24102:2010) /DIS 29281-1 Intelligent transport systems Communication access for land mobiles (CALM) Non-IP networking Part 1: Fast networking & transport layer protocol (FNTP) (Revision of 29281:2011) 2012-11-28 /DIS 29281-2 TC 215 Intelligent transport systems Communication access for land mobiles (CALM) Non-IP networking Part 2: Legacy system support (Revision of 29281:2011) Health informatics 2012-11-28 /DIS 21549-2 * Health informatics Patient healthcard data Part 2: Common objects 2012-11-29 (Revision of 21549-2:2004) /DIS 21549-3 * Health informatics Patient healthcard data Part 3: Limited clinical data 2012-11-29 (Revision of 21549-3:2004) /DIS 21549-4 * Health informatics Patient healthcard data Part 4: Extended clinical data 2012-11-29 (Revision of 21549-4:2006) JTC 1 Information technology
/IEC DIS 18092 Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) (Revision of /IEC 18092:2004) 2012-11-19 /IEC DIS 22536 Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) RF interface test methods (Revision of /IEC 22536:2005) 2012-11-06 /IEC DIS 15940 Systems and software engineering Software Engineering Environment Services 2012-11-09 (Revision of /IEC 15940:2006) /IEC DIS 26550 /IEC 14443-3:2011/DAmd 6 /IEC 14443-4:2008/DAmd 3 /IEC DIS 9973 Software and Systems Engineering - Reference model for product line engineering and management Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc Information technology Computer graphics, image processing and environmental data representation Procedures for registration of items (Revision of /IEC 9973:2006) 2012-11-09 2012-11-21 2012-11-21 2012-11-09 /IEC DIS 23006-4.2 Information technology Multimedia service platform technologies Part 4: Elementary services 2012-08-07 (Revision of /IEC 23006-4:2010) /IEC DIS 29120-1.2 Information technology Machine readable test data for biometric testing and reporting Part 1: Test reports 2012-11-27 FDIS circulated Period from 01 June to 30 June 2012 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only Vote terminates TC 5 Ferrous metal pipes and metallic fittings /FDIS 10380 * Pipework Corrugated metal hoses and hose assemblies 2012-08-29 (Revision of 10380:2003)
TC 8 Ships and marine technology /FDIS 3434 * Ships and marine technology Heated glass panes for ships' rectangular windows 2012-08-16 (Revision of 3434:1992, 3434:1992/Amd 1:2004) /FDIS 16145-1 /FDIS 16145-2 /FDIS 16145-3 /FDIS 11209 TC 17 /FDIS 683-1 * Ships and marine technology Protective coatings and inspection method Part 1: Dedicated sea water ballast tanks * Ships and marine technology Protective coatings and inspection method Part 2: Void spaces of bulk carriers and oil tankers * Ships and marine technology Protective coatings and inspection method Part 3: Cargo oil tanks of crude oil tankers * Ships and marine technology Large yachts Deck crane and access gangways strength requirements Steel * Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering (Revision of 683-1:1987) 2012-08-22 2012-08-22 2012-08-22 2012-08-19 2012-08-16 /FDIS 683-2 * Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering (Revision of 683-1:1987, /TR 11637:1997) 2012-08-16 /FDIS 683-11 * Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels 2012-08-16 (Revision of 683-11:1987) TC 20 8816:1993/FDAmd 1 Aircraft and space vehicles * Aircraft Solid-state remote power controllers General requirements Amendment 1 2012-08-26 8843:2005/FDAmd 1 * Aircraft Crimp-removable contacts for electrical connectors Identification system Amendment 1 2012-08-26 /FDIS 11227 * Space systems Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact 2012-08-22 /FDIS 16159 * Space systems Launch pad and integration site Facility, system and equipment failure analysis 2012-08-02 TC 23 /FDIS 15886-3 Tractors and machinery for agriculture and forestry * Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods (Revision of 15886-3:2004) 2012-08-28 /FDIS 12188-2 TC 35 * Tractors and machinery for agriculture and forestry Test procedures for positioning and guidance systems in agriculture Part 2: Testing of satellite-based auto-guidance systems during straight and level travel Paints and varnishes 2012-08-30 /FDIS 15184 * Paints and varnishes Determination of film hardness by pencil test 2012-08-29 (Revision of 15184:1998) /FDIS 19840 * Paints and varnishes Corrosion protection of steel structures by protective paint systems Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces 2012-08-06 (Revision of 19840:2004) TC 37 Terminology and other language and content resources /FDIS 24616.2 * Language resources management Multilingual information framework 2012-08-16
TC 38 /FDIS 105-A11 TC 41 Textiles * Textiles Tests for colour fastness Part A11: Determination of colour fastness grades by digital imaging techniques Pulleys and belts (including veebelts) 2012-08-29 /FDIS 1120 * Conveyor belts Determination of strength of mechanical fastenings Static test method 2012-09-15 (Revision of 1120:2002) TC 44 Welding and allied processes /FDIS 8205-3 * Water-cooled secondary connection cables for resistance welding Part 3: Test requirements 2012-08-29 (Revision of 8205-3:1993) /FDIS 9455-10 * Soft soldering fluxes Test methods Part 10: Flux efficacy test, solder spread method 2012-08-29 (Revision of 9455-10:1998) TC 54 Essential oils /FDIS 1342 * Essential oil of rosemary (Rosmarinus officinalis L.) 2012-08-13 (Revision of 1342:2000) TC 58 7225:2005/FDAmd 1 TC 61 Gas cylinders * Gas cylinders Precautionary labels Amendment 1 2012-08-15 Plastics /FDIS 11403-2 * Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties (Revision of 11403-2:2004) 2012-08-08 /FDIS 9772 TC 67 * Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame (Revision of 9772:2001, 9772:2001/Amd 1:2003) Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 2012-08-19 /FDIS 3183 * Petroleum and natural gas industries Steel pipe for pipeline transportation systems 2012-08-22 (Revision of 3183:2007) TC 69 /FDIS 22514-7 TC 84 Applications of statistical methods * Statistical methods in process management Capability and performance Part 7: Capability of measurement processes Devices for administration of medicinal products and intravascular catheters 2012-08-28 /FDIS 11608-3 * Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers 2012-08-29 (Revision of 11608-3:2000) /FDIS 11608-5 * Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions 2012-08-29 TC 94 16602:2007/FDAm d 1 Personal safety -- Protective clothing and equipment * Protective clothing for protection against chemicals Classification, labelling and performance requirements Amendment 1 2012-08-22
TC 96 Cranes /FDIS 4306-2 * Cranes Vocabulary Part 2: Mobile cranes 2012-08-26 (Revision of 4306-2:1994) TC 106 13397-2:2005/FDAmd 1 Dentistry * Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Grtype Amendment 1: Colour coding 2012-08-29 /FDIS 14457 * Dentistry Handpieces and motors 2012-08-22 (Revision of 11498:1997, 7785-2:1995, 13294:1997, 7785-1:1997) /FDIS 21672-2 * Dentistry Periodontal probes Part 2: Designation 2012-08-15 /FDIS 12836 TC 108 * Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy Mechanical vibration, shock and condition monitoring 2012-08-29 /FDIS 13372 * Condition monitoring and diagnostics of machines Vocabulary 2012-08-26 (Revision of 13372:2004) TC 118 /FDIS 28927-12 TC 121 Compressors and pneumatic tools, machines and equipment * Hand-held portable power tools Test methods for evaluation of vibration emission Part 12: Die grinders (Revision of 8662-13:1997, 8662-13:1997/Cor 1:1998) Anaesthetic and respiratory equipment 2012-08-22 /FDIS 5361 * Anaesthetic and respiratory equipment Tracheal tubes and connectors 2012-08-15 (Revision of 5361:1999) TC 127 Earth-moving machinery /FDIS 6165 * Earth-moving machinery Basic types Identification and terms and definitions 2012-08-22 (Revision of 6165:2006) TC 135 Non-destructive testing /FDIS 2400 * Non-destructive testing Ultrasonic testing Specification for calibration block No. 1 2012-08-15 (Revision of 2400:1972) TC 150 Implants for surgery /FDIS 14630 * Non-active surgical implants General requirements 2012-08-29 (Revision of 14630:2008, 14630:2008/DAmd 1) TC 154 /FDIS 14533-1 /FDIS 14533-2 TC 159 Processes, data elements and documents in commerce, industry and administration * Processes, data elements and documents in commerce, industry and administration Long term signature profiles Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) * Processes, data elements and documents in commerce, industry and administration Long term signature profiles Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES) Ergonomics 2012-08-30 2012-08-30 /FDIS 15535 * General requirements for establishing anthropometric databases 2012-08-22 (Revision of 15535:2006)
TC 172 Optics and photonics /FDIS 9334 * Optics and photonics Optical transfer function Definitions and mathematical relationships 2012-08-21 (Revision of 9334:2007) /FDIS 9335 * Optics and photonics Optical transfer function Principles and procedures of measurement 2012-08-21 (Revision of 9335:1995, 9335:1995/Cor 1:2005) /FDIS 11979-1 * Ophthalmic implants Intraocular lenses Part 1: Vocabulary 2012-08-29 (Revision of 11979-1:2006) 11979-4:2008/FDAmd 1 TC 173 * Ophthalmic implants Intraocular lenses Part 4: Labelling and information Amendment 1 2012-08-29 Assistive products for persons with disability /FDIS 7176-28 * Wheelchairs Part 28: Requirements and test methods for stair-climbing devices 2012-08-06 (Revision of 7176-23:2002, 7176-24:2004) /FDIS 10542-1 TC 176 * Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test methods for all systems (Revision of 10542-1:2001) Quality management and quality assurance 2012-08-22 /FDIS 10004 * Quality management Customer satisfaction Guidelines for monitoring and measuring 2012-08-30 (Revision of /TS 10004:2010) /FDIS 10018 * Quality management Guidelines on people involvement and competence 2012-08-09 TC 178 /FDIS 25745-1 TC 181 Lifts, escalators and moving walks * Energy performance of lifts, escalators and moving walks Part 1: Energy measurement and verification Safety of toys 2012-08-29 /FDIS 8124-1 Safety of toys Part 1: Safety aspects related to mechanical and physical properties 2012-08-21 (Revision of 8124-1:2009) TC 182 Geotechnics /FDIS 22476-4 * Geotechnical investigation and testing Field testing Part 4: Ménard pressuremeter test 2012-09-08 TC 190 Soil quality /FDIS 17155 * Soil quality Determination of abundance and activity of soil microflora using respiration curves 2012-08-02 (Revision of 17155:2002) TC 195 /FDIS 15688 TC 204 /FDIS 17261 /FDIS 17262 TC 205 Building construction machinery and equipment * Road construction and maintenance equipment Soil stabilizers Terminology and commercial specifications (Revision of 15688:2003) Intelligent transport systems * Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology (Revision of /TS 17261:2005, /TS 17261:2005/Cor 1:2005) * Intelligent transport systems Automatic vehicle and equipment identification Numbering and data structures (Revision of /TS 17262:2003) Building environment design 2012-08-30 2012-08-08 2012-08-08
/FDIS 13153 TC 213 /FDIS 17450-2 TC 215 /FDIS 1828 TC 236 * Framework of the design process for energy-saving single-family residential and small commercial buildings with the energy consumption ratio as a criterion Dimensional and geometrical product specifications and verification * Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (Revision of /TS 17450-2:2002, /TS 17450-2:2002/Cor 1:2004) Health informatics * Health informatics Categorial structure for classifications and coding systems of surgical procedures Project Committee: Project Management 2012-08-08 2012-08-15 2012-08-15 /FDIS 21500 * Guidance on project management 2012-08-02 TC 241 Project Committee: Road traffic safety management systems /FDIS 39001 * Road traffic safety (RTS) management systems - Requirements with guidance for use 2012-08-02 JTC 1 /IEC 14443-4:2008/FDAmd 2.2 /IEC FDIS 18000-6 Information technology * Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol Amendment 2: Bit rates of fc/8, fc/4 and fc/2, protocol activation of PICC Type A and frame size from 512 bytes to 4 096 bytes * Information technology Radio frequency identification for item management Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General (Revision of /IEC 18000-6:2010) 2012-08-23 2012-08-21 /IEC FDIS 18000-63 * Information technology Radio frequency identification for item management Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C 2012-08-21