lindab ventilation Lindab Comfort Product overview
Products within the Lindab Waterborne solutions, e.g. chilled beams, facade systems, radiant heating and cooling panels, uses water to regulate the room temperature. Room air is induced through the coil of the beam where the water, either cold or warm, is circulated which results in that the air and temperature in the room are controlled, creating superior comfort. The Waterborne solutions also include suspended or integrated chilled beams, cooling wall panels, supply air beams, facade systems, heating panels, heating strips, control equipment and lighting components. Visit www.lindqst.com We simplify construction has long been one of Lindab s core values. lindqst Lindab Quick Selection Tool an advanced web tool that makes the selection of our air- and waterborne products quick and simple. With lindqst all documentation is made available directly on the web. That means installers, consultants and architects always have access to the latest documentation, installation instructions and product images. It provides a simple shortcut to Lindab s material and is a tool that speeds up and simplifies the daily work. All information is just a mouse-click away. Take responsibility for your indoor climate... The new Plexus combines the traditional cooling function with 360 air distributing technology. This secures a draught-free indoor environment. With the new JetCone balancing technology, you can easily and without using tools, set the desired air flow rate and air pattern. The patent pending heating function in Plexus, secures that the heated air is provided only where needed. Using Plexus as a heat source makes it unnecessary to have radiators this account for about 20 % of the heating investment cost and offers greater flexibility in a completely unique way. The new Plexus therefore offers entirely new possibilities for increased room comfort in combination with lower energy consumption. 1 5 1. Inlet 2. Safe connection 3. 360º air diffusion 4. Face plate 5. JetCone 2 3 4 Lindab s JetCone air volume adjustment system. JetCone makes Plexus a very flexible solution with the possibility to adjust air diffusion, air volume and air pressure. Adjustments are made by changing the positions of the four adjustment regulators. The adjustment is done without any tools, making it very fast and simple. The JetCone technology provides an advantage in planning, since the product selection can be specified even if the planner does not have all the required data.
lindab ventilation Supply air beams Plexus The unique 360º supply air beam!, heating, ventilation, with built-in controller Use: Offices, hotels, restaurants, conference rooms, schools, etc. Installation: Integrated with the suspended ceiling Capacity: Cooling effect of up to 1000 W, air quantity of up to 52 l/s, 80 pa (Plexus 60). Cooling effect of up to 1500 W, air quantity of up to 45 l/s, 80 pa (Plexus 120). Important features: Plexus 360 air diffusion. 30% reduced draft risk because of shorter air throws. Easy to install into ceiling, ventilation, cooling, heating and regulation, JetCone adjustment, all in one. Professor The intelligent choise!, heating, ventilation, direct lighting with built-in controller rooms, schools, etc. Installation: Integrated with the suspended ceiling (Professor I) or free hanging (Professor F) Capacity: Cooling effect up to 400 W/m. Air volume up to 40 l/s. Important features: Extremely low construction depth only 120 mm Pilot The flexible supply air beam!, heating, ventilation, with built-in controller rooms, schools, etc Installation: Integrated with the suspended ceiling Capacity: Cooling effect up to 1400 W. Air volume up to 58 l/s. Important features: Pilot is based on a unique technology known as Jet gap, for which a patent is pending. This allows adjustments to air flow, air pressure and the spread of air. Can easily be adapted to new conditions. Architect Supply air beam to own design!, heating, ventilation, with built-in valves/controls and direct lighting rooms, schools, etc. Installation: Directly into suspended ceiling, against wall or free hanging Capacity: Cooling effect up to 400 W/m. Air volume up to 40 l/s. Important features: Freedom in architectural design. Extremely low construction depth only 100 mm. Plafond For compact and aesthetic installation!, heating, ventilation, with built-in valves/controls rooms, schools, etc Installation: Where wall meets ceiling Capacity: Cooling effect up to 400 W/m. Air volume up to 40 l/s. Important features: For visible installation where wall meets ceiling. Notice: Conditions to the details of the maximum flow and performance: static nozzle pressure of Δp stat = 80 Pa. Difference between room-and medium-temperature water Δt rw : 10 K b. Cooling/ 30 K b. heating. Difference between space and the primary air temperature Δt ra = 6 K. Beam length L = 3,0 m
Polaris I & S Powerful supply air beam., heating, ventilation, and built-in controller rooms, schools, etc Installation: Integrated with the suspended ceiling Capacity: Cooling effect up to 740 W/m. Air volume up to 70 l/s. Important features: Large capacity in a limited area Cabinett Convective cooling - quiet rooms, schools, industries, etc Installation: Three different models that can be suspended or integrated with the suspended ceiling. Open or closed air circulation. Capacity: Cooling effect: 185-300 W/m Important features: High cooling capacity. Passive chilled beams Carat Convective and radiant cooling - quiet, draught free and economical Use: Offices, shopping centres, industries, etc Installation: Free hanging or installed above perforated suspended ceiling Capacity: Cooling effect: 120-320 W/m Important features: Chilled beam using radiation for draught free ventilation. Visible or concealed installation. Available in lengths of up to 6 m. Can be connected in series. Heating- and chilling panels Atrium H/Loggia Radiant heat comfortable and energy-efficient Function: Heating Use: Industries, schools, hospitals, shopping centres, sport halls, etc Installation: Suspended or integrated (applies to Atrium H) with the suspended ceiling Capacity: Heating effect up to 620 W/m 2 Important features: Lightest heating panel on the market. Easy to clean, available in lengths of up to 6 m. Can be connected in series. Capella Chilled beam using radiation for low air velocities rooms, schools, shopping centres, etc Installation: Free hanging or installed above perforated suspended ceiling Capacity: Cooling effect: 80-200 W/m Important features: Chilled beam using radiation for draught free ventilation. Easy to clean. Available in lengths of up to 6 m. Atrium C Radiant cooling quiet and draught free Use: Industries, schools, hospitals, shopping centres, sport halls, etc Installation: Suspended Capacity: Cooling effect up to 150 W/m 2 Important features: Lightest cooling panel on the market. Easy to clean, available in lengths of up to 6 m. Can be connected in series.
Facade systems Fasadium, heating, ventilation with built-in controller Use: Offices, shops, schools, banks, hospitals, etc Installation: Facade position behind fixed window sill Capacity: Cooling effect: 200-1500 W. Heating effect: 200-1600 W Important features: Adapted for low air pressure (100 Pa) Condensation protection Drypac Function: For efficient protection against condensation Use: Where a high level of safety is needed against dripping condensation, and/or greater cooling capacity is required Application: Used on finned batteries Important features: Inorganic material. Can be used continuously 4 C below dew point. Control equipment Regula controller Specially designed controllers for waterborne ventilation systems with individual control Use: Regula Mono, Duo and Regula Combi, controllers that can regulate cooling and heating in the room in sequence, or control either cooling or heating. Regula Secura, condensation guard for safe and optimal operation. Installation: Regula Mono, Duo and Regula Combi can be integrated in the product or placed directly on the wall. Regula Secura and Regula Connect are integrated in or on the product. Important features: Easy to use controller ehybrid - Design a sustainable future... Why do we consume valuable energy when it's not really needed? Daily office work requires us to be flexible and mobile. Did you know that the average office space is only occupied for 50-70% of working hours? Lindab has solved the energy saving issue in the unoccupied zones without compromising the best indoor climate. We have build in all energy consuming functions into a single device and then added real demand-control. Lindab's new ehybrid is the best solution for a perfect indoor climate and offers energy savings that typically exceed 30% of the energy consumption. Visit our web site to see the ehybrid solution in function. - Design a sustainable future...
Download a free QR code app on your Smart- Phone and then scan this code to get further information about our product range. www.lindab.com