Instruction Manual Tower Fan NSTF-06MI Please register your product on-line at www.nscessity.co.uk www.nscessity.co.uk IMPORTANT! KEEP FOR FUTURE REFERENCE NSTF-06MI Instruction 8pp 23.5.indd 2 24/5/10 13:03:57
2 Tower Fan Model: NSTF-06MI Package Contents a) 1 x Tower Fan b) 2 x Base Parts c) This instruction manual If you find any of the above is missing, please contact your retailer. Parts Description 1) Control panel 2) LED indicator lights 3) Rotory speed control 3 4) ION indicator light 5) Front grille 4 6) Back panel 7) Oscillation support 8) Base plate (2pc) 5 1 2 6 7 8 NSTF-06MI Instruction 8pp 23.5.indd 3 24/5/10 13:03:57
Safety Instructions Please read this instruction manual before using your Tower Fan for the first time and keep safe for future reference. 3 CAUTION: Read and follow all instructions before operating this fan. Use the fan only as described in this manual. Misuse may cause a fire or an electrical shock. 1 Do not operate the fan with a damaged power cord or plug, after it malfunctions, has been dropped or damaged. If the power cord is damaged it must be replaced by a qualified service engineer to avoid a hazard. 2 Close supervision is necessary when this fan is used near children and pets. 3 Always turn the fan off after use and before cleaning or moving location. 4 Do not insert fingers or other objects into the fan guard. 11 Arrange the power cord away from an area where it may be tripped over. 12 Never place the power cord under a carpet or rug. 13 To disconnect from the power supply, grip the plug and pull from the power socket. Never pull by the cord. 14 Do not hang or mount the fan on a wall or ceiling. 15 Do not operate if the fan guard is removed or damaged. 5 Do not operate the fan in areas where petrol, paint or other flammable liquids are used or stored. 6 Do not place the fan near an open flame, cooking or heating appliance, or hot surface. 7 This fan is not intended for use in wet or damp locations. Never locate the fan in an area where it may fall into a bath or other water container. 8 This fan should not be operated outside. 16 This product is designed for household and light commercial use ONLY. 17 Do not allow children play with the packaging (such as plastic bags). 18 Check the voltage of your mains supply matches the voltage marked on the rating label of the appliance before plugging into the power socket. 19 Before assembling or dismantling the fan, please ensure that the fan is unplugged. 9 Always use on a dry, level surface. 10 Do not let the power cord hang over the edge of a table or counter. NSTF-06MI Instruction 8pp 23.5.indd 4 24/5/10 13:03:57
4 Caution This appliance is for household use only. Any servicing other than cleaning and user maintenance should be performed by authorized service representative. Do not immerse the unit in water. To reduce the risk of fire or electric shock, do not remove the housing. No user serviceable parts inside. Only authorized service personnel shall handle repair work. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Assembly of the Fan 1. Ensure the power cord goes through the hole created by the front & back base plates when joined together. 2. Make sure the holes of front base plate correspond with the rear base, and then press them together. 3. Insert the Oscillation support into the base plate. 4. Fasten the Butterfly screws to make sure the main unit and the base plates are firmly connected. 5. Then clip the power cord into base plate. NSTF-06MI Instruction 8pp 23.5.indd 5 24/5/10 13:03:58
Operating Instructions 5 Press the ON/OFF button once to turn on the power and press again to stop. SPEED When the fan is switched on, turn the speed control knob in a clockwise direction to increase the fan speed. Turn it anticlockwise to reduce the speed. LEDs The LEDs will light up to indicate the volocity. Press the OSC button to make the fan oscillate in a horizontal direction. Press again to switch off this function. Speed control ION MODE Press once to choose breeze effect; press twice to select sleep mode; press a third time to turn off wind effects. Breeze mode simulates a natural wind cycle of rising and falling wind velocity which will vary according to the fan speed selected by the rotary speed control. Sleep mode is similar to Breeze mode and will include periods when the fan is off. TIMER Press the button to select the required operating time ~ 1, 2, 4 or 8 hours. The LED lights will indicate the chosen time. For continuous operation, do not select Timer or press the Timer button a fifth time according to the following diagram. ION When the appliance is switched on, press the ION button to set the ioniser function. The appliance will release negative ions into the air to assist in restoring a natural balance. A blue light will indicate that the ION function is selected. Press the ION button once more to turn off the ION function. NOTE: when breeze or sleep mode is selected, the fan will continually cycle through Low, Medium and High setting as appropriate to the desired speed. NSTF-06MI Instruction 8pp 23.5.indd 6 24/5/10 13:03:58
6 Maintenance BEFORE MAITENANCE, REMOVE THE PLUG FROM THE POWER SUPPLY. Use a soft cloth regularly to clean the surface of the fan and fan base. Should the fan body become very dirty, use a soft, damp cloth and dry the unit completely before reconnecting to the power supply. Do not allow water to get into the motor during the cleaning process. Do not use the THINNER, ALCOHOL, OR OTHER CHEMICAL liquids to clean the fan. Storage out of season Before storing your fan at the end of the season please follow the above maintenance routine and then: 1. Apply a few drops of lubricant on motor shaft to avoid corrosion. 2. Remove any oil or dirt stains from the body to prevent the fan from damage. 3. Return the fan to it s retail carton and store in a cool, dry place. Recycling and Disposal The WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) has been put in place to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high level environment protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not mix products bearing the crossed out bin symbol with your general household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. NSTF-06MI Instruction 8pp 23.5.indd 7 24/5/10 13:03:58
Service and Warranty NScessity guarantees this product free from defects in materials and workmanship for a period of one (1) year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, or if the unit has been re-sold, this will render this WARRANTY VOID. The product you buy may sometimes differ slightly from illustration. This warranty is in addition to, and does not affect, your statutory rights. Do not operate the unit with a damaged cord or plug, after the unit malfunctions, has been dropped or damaged. For your convenience, record the complete model number and product name (located on the Rating Plate), the date you purchased the product, and attach your purchase receipt as proof of purchase. To ensure your product is covered by warranty, the complete faulty product together with your purchase receipt should be returned to your retailer. 7 Should you have a problem with this product, please contact our help desk, Tel: 0870 765 2574 or visit our website at www.nscessity.co.uk This product has been manufactured to comply with EEC Directives 2006/95/EG and 98/336/EEC Date of purchase: Place of purchase: NScessity has a large range of premium products. We endeavour to ensure NScessity Products are the best you can get in their categories, we are very proud of them! Please visit our website for further information, www.nscessity.co.uk NSTF-06MI Instruction 8pp 23.5.indd 8 24/5/10 13:03:58
Specification Model No: NSTF-06MI Voltage: 220-240V, 50Hz Rated power: 40w N.W. 4.5kg G.W. 5.5kg Class II 2010 NScessity Ltd All Rights Reserved Tel: 0870 765 2574 www.nscessity.co.uk GU8 6BD NSTF-06 / IM1005 NSTF-06MI Instruction 8pp 23.5.indd 1 24/5/10 13:03:56