CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Similar documents
CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Reaction to fire testing of Vescom vinyl wall covering with a Fibre Structure, a total weight of 550 g/m 2 according to EN 13823:2002

Test Report: ICL/CR15/11/087

P.O. Box NL-2665 ZN Bleiswijk Brandpuntlaan Zuid 16 - NL-2665 NZ Bleiswijk The Netherlands

Classification report

Centrum stavebního inženýrství a.s.

Reaction to fire classification report No C-rev.1

Reaction to fire classification report No C

Additional Reaction to Fire Classification Report

TNO report. Centre for Fire Research Van Mourik Broekmanweg 6 P.O. Box AA Delft. T F

TFI Report Classification

Contact person Date Reference Page Richard Johansson P (2) Fire Research

Additional reaction to fire classification report No H

Classification of reaction to fire performance in accordance with BS EN : A1: 2009 on Sandwich Panel, WP 50.

CPD Seminar: Importance of Reaction-to-Fire Properties of Materials: Combustibility, Spread of Flame and Smoke Generation

CLASSIFICATION REPORT

Centrum stavebního inženýrství a.s.

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

New European Fire Testing Classification for Construction Products

Classification Report

Form: KSD-100:10 Page 1 of 3

PUBLIC SUMMARY REPORT OF THE EGOLF EN 13823

DELTA Classification Report

Forbo Flooring Attn. Mr. A. Tijhof Postbus AA Krommenie. Report. Sponsor : Contractor, manufacturer : Forbo Flooring. Lot. No. : 66869/3877.

BS EN 13823: A Report To: Contra Vision. Document Reference: Date: 25 th November Issue No.: 1

Test Report: ICL/H18/9039 Rev 1

SBI. Single Burning Item - EN THE BENCHMARK IN FIRE TESTING

Determination of the fire resistance according to EN : 2006 of vertical linear joints sealed with Henkel PATTEX FR55

Classification of reaction to fire performance in accordance with EN : A1: 2009 on Superfoil SFNC. Prepared for:

BS EN 13823: A Report To: Durabuild Technologies Pvt. Limited. Document Reference: Date: 22 nd February Issue No.

CLASSIFICATION IN REGARD OF REACTION TO FIRE according to EN :2007

TFI Report Classification

REACTION TO FIRE TESTS FOR BUILDING PRODUCTS DETERMINATION OF THE HEAT OF COMBUSTION ACCORDING TO STN EN ISO 1716: 2003

gent warn nfire No, 16209C Reaction to fire class ification report lntroduction Owner of the classification report

Determination of the fire resistance according to EN of vertical linear joints sealed with Henkel PATTEX FR66

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

Analysis Report

BCTC CARPET TECHNICAL CENTRE

Not all insulation is the same! from fire testing to real fires.

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Analysis Report

New European Cable Testing and Classification

Certification of Translation Accuracy Translation of Document from Dutch to English

CPR: EUROCLASSIFICATION & TESTS FOR CABLES

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Information Data Sheet. Fire behavior of decorative high pressure laminates (HPL)

SUBJECT: ASSESSMENT FOR INTERNAL SURFACE FINISHES OF LIGHTBETON PANEL FOR COMPLIANCE WITH THE NEW ZEALAND BUILDING CODE(NZBC)

REVIEW ON TWO PERFORMANCE-BASED TESTS FOR ASSESSING FLAME SPREAD IN HONG KONG

Tech Notes. TESTING PROTOCOL Fire Retardant Gel Coats. INTERPLASTIC CORPORATION Thermoset Resins Divison ISSUE 5

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

Harmonisation and equivalence of reaction-to-fire performance classification in Europe: a small-scale desk-based study

TFI Report Reaction to fire test

Certifikat och provningsprotokoll för art och 4511

MEDIUM-DENSITY HOUSING # 7. Fire safety

MFPA Leipzig GmbH Prüf-, Überwachungs- und Zertifizierungsstelle für Baustoffe, Bauprodukte und Bausysteme

FAÇADE FIRE TESTS Towards a new European standard method

BS EN ISO : 2010

BS EN ISO : 2010

BS EN ISO : 2010

Test report. NanoPhos coating system EPR and EEN. Name of client: NanoPhos SA. Date: Pages: 5 Encl.: 1 Ref: BP / KTO

IMO Resolution MSC 61(67): Annex 1: Part 2

Report VNLF Test Report

Development of a European approach to assess the fire performance of facades

Facts about insulation and fires 29 October 2014

Abrasion Resistance of Fluoropolymer and polyester Coatings

Test on extruded rigid PVC profile for concrete formwork at 50 kw/m² irradiance in

+ = FIRE LABORATORY INTRODUCTION. APPLUS+ LGAI - Our company history. High Technology Knowledge. Customer Confidence. Branding

ASSESSING THE FIRE PERFORMANCE OF ELECTRIC CABLES (FIPEC)

BS 476: Part 6: 1989+A1:2009

Passive fire protection. 6 Passive fire protection. 6.1 Fire compartmentation. Passive fire protection

ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS

Sýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

Üntel is ready for CPR

White paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?

Loss Prevention Standard

1.0 INTRODUCTION. Shaw Industries Group 2 SwRI Project No c

Report Test Report

CERTIFICATE OF APPROVAL No ME 5085

Maximum Dimensions: Approved for spans unlimited in width, heights up to 10.5 m ( in), minimum panel overlap 400 mm (15.

Analysis Report

ISO INTERNATIONAL STANDARD

BS EN ISO 1716: Determination Of The Heat Of Combustion For Building Products

EU DECLARATION OF CONFORMITY (Doc) issued in accordance with the MARINE EQUIPMENT DIRECTIVE (MED) and EU/US MRA

BS 476: Part 3: External Fire Exposure Roof Test. WF Report Number: Date: 28 th April Test Sponsor: Tapco Europe Limited

Vescom bv Sint-Jozefstraat AV Deurne Nederland

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

AFIREFENIX SZ1-K 0,6/1 kv PH120 (AS+)

CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE

~,oeti. Report VN Classification Report. Reference

Institute of Building Technology. Classification report no: Reaction to Fire acc. PN-EN A1:2010

ISO INTERNATIONAL STANDARD

FUNDERMAX GMBH FIRE TEST REPORT

Transcription:

P.O. Box 554-2665 ZN Bleiswijk Brandpuntlaan Zuid 16-2665 NZ Bleiswijk +31 88 3473 723 nederland@efectis.com OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN 13501-1:2007+A1:2009 Classification no. Sponsor Product name P.O. Box 70 5750 AB Deurne Vescom Fine Prepared by Efectis Nederland BV Notified body no. 1234 Author(s) W. Scheffer BBE A.J. Lock Project number 2013400 Date of issue Number of pages 5 All rights reserved. No part of this publication may be reproduced and/or published without the previous written consent of Efectis Nederland. Submitting the report for inspection to parties who have a direct interest is permitted. In case this report was drafted on instructions, the rights and obligations of contracting parties are subject to either the Standard Conditions of TNO or the relevant agreement concluded between the contracting parties. 2013 Efectis Nederland BV Page 1 / 5

1. INTRODUCTION This classification report defines the classification assigned to Vescom Fine in accordance with the procedures given in EN 13501-1:2007+A1:2009. 2. DETAILS OF CLASSIFIED PRODUCT 2.1. GENERAL The product, Vescom Fine, is defined as a wall covering. 2.2. PRODUCT DESCRIPTION Product description: Polypropylene woven fabric on paper backing Vescom 2000 water-based adhesive, consisting of carbohydrates and PVAc, following the product instructions The product has a total thickness of approx. 0.5 mm and a mass per unit area of approx. 300 g/m 2. 2.3. MANUFACTURER/IMPORTER P.O. Box 70 5750 AB Deurne 3. STANDARDS, REPORTS, RESULTS AND CRITERIA IN SUPPORT OF THIS 3.1. REPORTS Name of laboratory Name of sponsor Report ref. no. Test method Efectis Nederland BV 2013-Efectis-R0400a 2013-Efectis-R0400b EN ISO 11925-2:2010 EN 13823:2010 This report consists of five pages and may only be used in its entirety. Page 2 / 5

3.2. TEST RESULTS Test method and test number EN-ISO 11925-2 surface flame impingement Edge flame impingement EN 13823 Vescom Fine Parameter Fs 150 mm Ignition of filter paper Fs 150 mm Ignition of filter paper No. tests 6 6 Continuous parameter mean (m) Results Compliance with parameters 21-26 - FIGRA0.2MJ [W/s] 59 - FIGRA0.4MJ [W/s] 28 - THR600s [MJ] 2.1 - LFS < edge SMOGRA [m2/s2] 3 2 - TSP600s [m2] 43 - Flaming debris - flaming 10 s - flaming > 10 s Compliant 3.3. CRITERIA Classification criteria of the Single Burning Item (SBI) test Construction products Excluding floorings and linear pipe thermal insulation products Class Fire Class Smoke A2 B FIGRA 0.2 MJ 120 W/s LFS < edge of the long wing specimen THR 600s 7.5 MJ FIGRA 0.2 MJ 120 W/s LFS < edge of the long wing specimen THR 600s 7.5 MJ s1 SMOGRA 30 m 2 /s 2 TSP 600s 50 m 2 s2 SMOGRA 180 m 2 /s 2 TSP 600s 200 m 2 FIGRA 0.4 MJ 250 W/s Class Droplets C LFS < edge of the long wing specimen d0 No flaming droplets/particles THR 600s 15 MJ d1 Flaming droplets/particles < 10 s D FIGRA 750 W/s d2 Not d0 or d1 This report consists of five pages and may only be used in its entirety. Page 3 / 5

4. AND FIELD OF APPLICATION 4.1. REFERENCE OF This classification has been carried out in accordance with clause 11 of EN 13501-1:2007+ A1:2009. 4.2. The product, Vescom Fine, in relation to its reaction to fire behaviour is classified: B The additional classification in relation to smoke production is: s1 The additional classification in relation to flaming droplets / particles is: d0 Reaction to fire classification: B s1, d0 4.3. FIELD OF APPLICATION This classification is valid for the following product parameters: Thickness Approx. 0.5 mm Surface density 300 g/m 2 This classification is valid for the following end use applications: Substrate Air gap Methods and means of fixing Joints Non-combustible (class A1/A2 according to EN 13238:2010) None Glued None 4.4. DURATION OF THE VALIDITY OF THIS REPORT There are no limitations in time on the validity of this report. This report consists of five pages and may only be used in its entirety. Page 4 / 5

5. LIMITATIONS This classification document does not represent type approval or certification of the product. W. Scheffer BBE A.J. Lock Project leader reaction to fire Project leader reaction to fire This report consists of five pages and may only be used in its entirety. Page 5 / 5