PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual curves for symbol number) Individual performance curves should be checked for final selection.
PAGE 60HZ PERFORMANCE BASE MOUNTED TURBINE PUMPS 750 RPM Catalog Number ES5M ES6M ES7M ES8M ES9M PSI (kpa) FEET (M) 8.6 (59) (6) 5.6 (.35).0 60HZ - PERFORMANCE AND SELECTION CHART Capacity In at Total Head in Feet (M) or Pressure Shown 7. (8) 0 ().9 (.30). 6 (79) 60 (8). (.6).5 3.3 (98) 00 (30) 3. (.). 5. (373) 5 (38).8 (.7).8 6.9 (7) 50 (5). (.5).35 75.8 (5) 75 (53). (.3). 86.6 (597) 0 (60).8 (.).8 97. (67) 5 (68).6 (.0).5 08.3 (76) 50. (.08).59 9. (8) 75 (83). (.07).65 Motor Size / /3 / 3/ 7.7 (.8).5 6.9 (.3). 6. (.39).5 5.0 (.3).35. (.7). Motor Size / / 3/ 0.5 (.66). 9. (.59).8 8.6 (.5).3 7. (.5).8 6.5 (.).55 3.9 (.).8 5.9 (.37).6 3.6 (.).5 5. (.3).75 3. (.).58.8 (.30).85.9 (.8).6. (.7).9.6 (.6).65.0 (.5).0. (.5).70 3.5 (.). 30 (896) 300 (9).0 (.06).69. (.3).78 3. (.9).35 0. (965) 35 (99) Motor Size / /3 / 3/ -/ -/. (.76).35. (.70). 0.3 (.6).50 8.9 (.56).65 8. (.5).75 7.5 (.7).85 Motor Size / 3/ -/.5 (.9).0 3. (.8).5. (.76).6 0. (.65).80 9.6 (.60).90 8.8 (.55).05 Motor Size / 3/ -/ 3 6.8 (.).95 8. (.5).5 6. (.39).0 7.5 (.7).30 5.6 (.35). 6.9 (.3). 5.0 (.3).35 6.3 (.39).60.5 (.8).5 5.7 (.35).75.0 (.5).6 5. (.3).90.7 (.7).50 3.6 (.).75.8 (.30).0 5.6 (05) 350 (06).3 (.).70 3. (.9).95. (.6).35 350 RPM Catalog Number ES5M ES6M ES7M ES8M ES9M PSI (kpa) FEET (M) 3 (89) 30 (9) 0.8 (.68).60 Capacity In at Total Head in Feet (M) or Pressure Shown 7. (8) 0 () 0. (.65).65 6 (79) 60 (8) 0.0 (.63).70 3.3 (98) 00 (30) 9. (.58).80 5. (373) 5 (38) 8.8 (.55).9 6.9 (7) 50 (5) 8.6 (.5).98 75.8 (5) 75 (53) 8.3 (.5).0 86.6 (597) 0 (60) 8.0 (.50). 97. (67) 5 (68) 7.8 (.9).30 08.3 (76) 50 7.6 (.7). 9. (8) 75 (83) 7. (.6).5 30 (896) 300 (9) 7. (.5).75 Motor Size 3/ -/ 5.6 (.98).85 5. (.95).90.6 (.9).00 3.5 (.85)..9 (.8).35. (.78).5 Motor Size -/ 3.0 (.6).30 9.6 (.3).38 8.7 (.7).55 7.3 (.09).80 6.6 (.0).95 5.9 (.00). Motor Size -/ 3 5 6. (.65).60 5.6 (.6).70.5 (.5).80.9 (.)..0 (.38).0. (.33).60.9 (.75).60 5.3 (.96).8.5 (.9).80.6 (.73).70.8 (.93).5 9.8 (.) 3.00. (.70).85.3 (.90).60 9. (.) 3.30 0.8 (.68).95 3.8 (.87).80 8.5 (.6) 3.60 0. (.65).0 3.3 (.83).95 8.0 (.3) 3.80 Motor Size 3 5 3.0 (.0).00 3.5 (.98).0 30.5 (.9).30 8.6 (.6).70 7.5 (.73) 3.00 6.5 (.67) 3. 5.6 (.6) 3.50.7 (.55) 3.70 3.9 (.50) 3.90 3.0 (.5).. (.0).0 0. (.63)..8 (.80) 3.5 7. (.09).0.5 (.35).60 0. (965) 35 (99) 7. (.).85 9.8 (.6).30.5 (.78) 3.5 6.9 (.06).0.7 (.30).90 5.6 (05) 350 (06) 7.0 (.).00 Motor Size 3 5 7-/ 9.5 (.59).50. (.76) 3.5 6. (.03).90.0 (.6) 5.0 NOTE: When pumping hot water over 80 F (8. C), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH.
PAGE FEATURES MAXIMUM OPERATING CONDITIONS TEMPERATURE 5 F (07 C) (For Standard Buna-N Seal) INLET PRESSURE 00 PSI (689kpa) CASING WORKING PRESSURE 50 PSI (73kpa) BURKS exclusive, unique regenerative type turbine pumps are designed to handle clear water and many other non-abrasive, lower viscosity liquids on high pressure, low capacity applications with the greatest possible efficiency. BURKS is the only turbine pump with Life-Lok External Impeller Adjustment feature that allows readjustment of impeller without disturbing piping, disassembling pump or replacing parts. Gives up to 0% longer service life than turbine pumps of other designs. Coupling guard furnished on all complete Base-Mounted units manufactured by Burks Pumps. Not furnished with purchase of pump only, but required. QUALITY FEATURES: Self-Priming Compact, space-saving size Dependable carbon/ceramic mechanical shaft seal for temperatures to 5 F (07 C). Bronze impeller with Monel blades - the only moving part Bronze raceway with cast-in vortex pockets - will not vapor lock #303 Stainless Steel pump shaft Easy to service Every pump factory tested Available Bronze fitted, all Bronze, Stainless Steel FOR TEMPERATURES TO 500 F (60 C) Series ES Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "J" to pump catalog number for temperatures below 00 F ( C) and add suffix "JK" to pump catalog number for temperatures over 00 F ( C). Example: ES6MJ. See Section on High Temperature Pumps for more information. PART Bearing Housing MATERIALS OF CONSTRUCTION BRONZE ALL BRONZE STAINLESS FITTED STEEL Cast Iron Cast Iron Cast Iron Adapter Cast Iron Bronze #36 Stainless Case Cast Iron Bronze #36 Stainless Raceway Bronze Bronze #303 Stainless Impeller Bronze (Monel Blades) Bronze (Monel Blades) #303 Stainless Shaft #303 Stainless #303 Stainless #303 Stainless Shaft Seal Carbon-Ceramic Carbon-Ceramic Carbon-Ceramic S. Steel-Buna-N S. Steel-Buna-N S. Steel-Buna-N
PAGE 5 DIMENSIONS DIMENSIONS IN INCHES (mm) A B CP D DD E F G H K K L O P U V X Y 5 5 / (39) 3 / (88) 3 /8 (79) (50) 3 3 /8 (85) / (3) / (3) 5 /8 () () 8 3 /8 () 6 3 / (7) /6 (6) 3 / (9) / (57) (8) () Motor Frame DIMENSIONS IN INCHES (mm) AB C CP HA HB HC HD HE HF HG HH HL HM HO HP HT X Y 56 --- / (37) 3T 6 3 /6 0 /6 (57) (7) 5T 6 3 /6 (57) 8T 8 / (9) 8T 8 / (9) 3T 8 / (9) 5T 8 3 / () (96) 3 / (33) 3 3 / (39) 5 3 / (00) 7 / (38) 8 (3) 8 (3) 8 (3) 0 (5) 0 (5) (79) (79) (558) (558) (558) 5 (635) 5 (635) 8 3 / (730) 8 3 / (730) 8 3 /6 (75) 6 3 /8 (669) 7 3 /8 (695) 8 /6 (78) 9 /6 (75) 3 (80) 33 3 /6 (8) 6 (5) 6 (5) 6 (5) 7 (77) 7 (77) 7 3 / (96) 7 3 / (96) 3 3 3 (0) (0) / () / () (508) (508) (508) 3 (58) 3 (58) 6 3 / (679) 6 3 / (679) / / / / / / / /6 /6 /6 /6 /6 /6 /6 () () () () () () () 9 3 /6 (33) 9 / () 9 / () / (9) / (9) 3 /6 (33) 3 /6 (33) 9 / (3) 9 / (3) 9 / (3) 0 / (60) 0 / (60) (79) (79) A strainer, approximately mesh, should be installed on the suction side of the pump to prevent chips, scale or hard foreign particales from entering the pump and damaging the raceway and impeller. (5) (5) (5) (5) (5) (5) (5) 9 /6 () 9 /6 () 9 /6 () 3 /6 () 3 /6 () 3 /6 () 3 /6 () (8) (8) (8) (8) (8) (8) (8) () () () () () () ()
60HZ PERFORMANCE ES SERIES TURBINE PUMPS PAGE 7
TBMP-8 SERIES: ES BASE MOUNTED TURBINE PUMPS File: ES.dwg
PumpAgents.com - Click here for Pricing/Ordering SYMBOL NUMBER PART NUMBER QTY DESCRIPTION SYMBOL NUMBER PART NUMBER QTY DESCRIPTION 3 5 0 939 9 069 63 Key Oil Seal Spring Plug, /8" Bearing 6 09789-5 09789-6 09789-7 09789-8 09789-9 Raceway - ES5M Raceway - ES6M Raceway - ES7M Raceway - ES8M Raceway - ES9M 6 7 8 9 9 9 0978 07576 07577 083 Shaft Bearing Housing Impeller Adjusting Screw Lock, adjusting Screw Screw - #0- x 3/8" Slinger Washer 7 8 9 30 3 3 0979 058-B 07003 0 0568 0953 5 Frame (for stuffing box) Gland, Stuffing Box Gland Bolt Gland Nut Packing Pipe Plug - /" 5 6 7 0899 983-C 93 09787 0979 0987 35 0 0535 Mechanical Seal - Buna N Mechanical Seal - Viton Mechanical Seal - EPT Frame (for mechanical seal) O-Ring Gasket - Buna N O-Ring Gasket - Viton O-Ring Gasket - EPT O-Ring Gasket - Teflon Screw, Raceway to Frame 5 7 5 38 Power Frame Assy DIFFERING PARTS FOR ALL BRONZE CONSTRUCTION 09787-A 0979-A 09790-C 03-A 0877 Frame (for mechanical seal) Frame (for packing gland) Case Cap Screw Cap Screw - S.S. 8 9 3 5 SA09788-5 SA09788-6 SA09788-7 SA09788-HT-8 SA09788-HT-9 00 09790-B 036 03 09695 85 057 78-A 093 03 Impeller - ES5M Impeller - ES6M Impeller - ES7M Impeller - ES8M Impeller - ES9M Impeller Locknut Case Pipe Plug - /" Suction Sleeve - Buna N (Std.) Suction Sleeve - Viton Suction Sleeve - EPT Key, Woodruff (as shown) (repair kits only) Key, Square Cap Screw, 7/6- x -/" Lg Cap Screw, /- x 3/" Lg REPAIR KITS FOR ES SERIES PUMPS CATALOG NO. 5-5 5-6 5-7 5-8 5-9 FOR USE WITH ES5M ES6M ES7M ES8M ES9M Kit Includes: Impeller, Raceway, Mechanical Seal, Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and Instructions. TBMP-85 SERIES: ES BASE MOUNTED TURBINE PUMPS * Standard impellers are suitable for fluid temperatures to 50 F. For higher temperatures, add the designation "HT" to impeller part number. This includes all "MJ" Jacketed Seal Pumps. Example: SA-9788HT-5
For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Burks Pumps Home >> Burks Pumps stock list >>