G FACTOR = 350 / 450 SOFT MOUNTED High spin Maximum efficiency, energy saving and environmentally friendly. Especially designed for those laundries where the quality of the process and the energy and water saving are a priority. The new high spin washer extractors offer a top performance and a renovated look to meet the needs of the most demanding customers. Its advanced design and technology, together with its wide range of options and accessories, have an important effect on the energetic efficiency and on water and chemicals saving, reducing its production costs and increasing the business productivity. This type of high spin washer extractors (G-Factor: 350 to 450) drastically reduce the residual moisture after the washing process, thus allowing important savings in the process that follows such as drying and ironing. The simple and quick installation and the minimum space required for its use and maintenance are a key advantage compared to other ranges. The new high spin washer extractors offer models in 11, 14, 18, 25, 35, 45, 60 and 120 kg. FEATURES High spin soft mounted washer extractors, G Factor: 350 to 450 and spinning speeds between 680 and 1245 rpm depending on model. Easy installation, no need of anchoring to the floor and reduced costs. External case, jacket and drum made in stainless steel. Traceability storage of data. OPTIONS Double drain kit allows the recovery of the water, with important savings. Feet (for models 11 to 25 kg). Drain pump kit (11 and 14 kg). Bottom cover for 45, 60 and 120 kg washers and plinth for 11, 14, 18 and 25 kg models. Double heating electric-steam kit. Tilting System both forwards and backwards for an easy loading. unloading in 60 and 120 kg models. Weighing sensor System on feet. 6 extra signals for automatic liquid dosing. Ship voltage: 440 480 III without neutral - 50 / 60 Hz. Remote controle module for external management. STAINLESS STEEL DESIGN EFFICIENT MIX BALANCE CONTROL TOUCH PLUS CONTROL MULTI- CHOICE INLET AUTO WEIGHT WET CLEANING MAINT. CARE OPTIMIZED DRUM OPTIMAL CONSUMP. 19
Laundry Washing Washing Drying Ironing Finishing Accessories Professional laundry Self-service High spin / 11-14 - 18-25 - 35 kg G FACTOR = 450 LA-18 TP E Microprocessor Touch Plus Control with display. 26 pre-set programs (4 economic programs). Possibility of programming, export and import programs through USB memory, without limite. WASH CONTROL management software included. Digital sequence display. 8 signals for automatic liquid dosing, programmable in time and delay. Possibility to install an automatic detergent doser on the rear of the machine. Detergent dispenser with 4 compartments (pre-wash, wash, bleachers and softeners). Water levels completely modifiable. 3 water inlets (Hot water, Cold water, Soft water). Safety switch for door opening. Wash and spin speeds are configurable.. These machines have electronic control of imbalance with frequency variator, that detects the load uncentered before spinning. Standard frequency: 50-60 Hz. No need to be fixed to the floor. WRAS approved product. Optional version for ETL certified product. Model Code Capacity kg Drum Vol. Door Spin speed Power (*) Dimensions (#) (1:9) (1:10) Ø x Depth litres Ø r.p.m. G kw Volt mm LA-11 TP E 19034351 11 10 532x425 100 290 1.245 450 6,25 T 692x788x1.158 LA-11 TP HW 19034734 11 10 532x425 100 290 1.245 450 0,75 M 692x788x1.158 LA-11 TP S 19034735 11 10 532x425 100 290 1.245 450 0,75 M 692x788x1.158 LA-14 TP E 19034352 14 13 620x430 130 373 1.150 450 9,50 T 788x869x1.301 LA-14 TP HW 19034736 14 13 620x430 130 373 1.150 450 1,50 M 788x869x1.301 LA-14 TP S 19034737 14 13 620x430 130 373 1.150 450 1,50 M 788x869x1.301 LA-18 TP E 19034353 20 18 700x470 180 373 1.080 450 12,75 T 884x913x1.409 LA-18 TP HW 19034738 20 18 700x470 180 373 1.080 450 2,20 M 884x913x1.409 LA-18 TP S 19034739 20 18 700x470 180 373 1.080 450 2,20 M 884x913x1.409 LA-25 TP E 19034354 28 25 770x530 250 373 1.035 450 19,00 V 979x1.041x1.548 LA-25 TP HW 19034770 28 25 770x530 250 373 1.035 450 3,00 M 979x1.041x1.548 LA-25 TP S 19034771 28 25 770x530 250 373 1.035 450 3,00 M 979x1.041x1.548 LA-35 TP E 19034355 39 35 860x602 350 560 975 450 22,00 X 1.095x1.184x1.598 LA-35 TP HW 19034772 39 35 860x602 350 560 975 450 4,00 X 1.095x1.184x1.598 LA-35 TP S 19034773 39 35 860x602 350 560 975 450 4,00 X 1.095x1.184x1.598 (#) : Heating systems for washer extractors 11-14 - 18-25 - 35 kg (*) : Standard Voltages for models 11-14 - 18-25 - 35 kg : E : Electrical heating Heated by heating elements T : Code for 400 V III +N / 230 V III (THREE PHASE) Valid also for 230 V I+N (Single phase) HW : Hot water Washing process with hot water. M : Code for 230 V I+N (SINGLE PHASE) Valid for 400 V III +N / 230 V III (Three-phase) S : Heating by steam in an external generator. Inlet pressure: 4 bar. V : X : Code for 400 V III +N (Three-phase) - Valid also for 230 V III Code for 400 V III +N (Three-phase) - (Optional 230 V III) 20
WET CLEANING «WET CLEANING» system incorporated: - Control of temperature - Control of the time - Water levels completely modifiable - Possible manual dosing for every 8 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second Options for LA washer extractors / 11-14 - 18-25 - 35 kg Model Code Description KDD-14-18 19004633 Kit double drainage for 14 and 18 kg KDD-25 19004662 Kit double drainage for 25 Kg KP-11 19004482 Kit feet for LA-11, LA-14, LA-18, LA-25 and LA-35 KBD-11-14 19034837 Kit drain pump for LA-11 and LA-14 KZ-11 19005582 Plinth to put the machines at the same level - For 11 kg machines - H=505 mm KZ-14 19005336 Plinth to put the machines at the same level - For 14 kg machines - H=363 mm KZ-18 19005061 Plinth to put the machines at the same level - For 18 kg machines - H=255 mm KZ-25 19004974 Plinth to put the machines at the same level - For 25 kg machines - H=116 mm KH-11 19035700 Plinth to align the door at 850 mm - For 11 kg machines KH-14 19035701 Plinth to align the door at 850 mm - For 14 kg machines KH-18 19035702 Plinth to align the door at 850 mm - For 18 kg machines KH-25 19035703 Plinth to align the door at 850 mm - For 25 kg machines KV-11-14-18 19004570 Kit to transform an E or HW machine (11, 14 or 18 kg) to Steam version KV-25 19004571 Kit to transform an E or HW machine 25 kg to Steam version KV-35 19035743 Kit to transform an E or HW machine 35 kg to Steam version AUTO WEIGHT 19035704 Weighing sensor System on feet. Includes RL-6. RL-6 19034838 6 extra signals for automatic liquid dosing. LA-35 230-3 WIFI Voltage 230 V - 3 50/60 Hz for LA-35 REMOTE CONTROLE MODULE FOR EXTERNAL MANAGEMENT Transformation to ship voltage Only for electrical heating. Kit transformation ship voltage 440 480 V - III - 50/60 Hz Extra price transformation ship voltage for: Washer extractor LA-11 T`P Washer extractor LA-14 T`P Washer extractor LA-18 T`P Washer extractor LA-25 T`P Washer extractor LA-35 T`P 21
Laundry Washing Washing Drying Ironing Finishing Accessories Professional laundry Self-service High spin / 45-60 - 120 kg G FACTOR = 350 Microprocessor Touch Plus Control with display. 26 pre-set programs (4 economic programs). Possibility of programming, export and import programs through USB memory, without limite. WASH CONTROL management software included. Digital sequence display. 8 signals for automatic liquid dosing, programmable in time and delay. Possibility to install an automatic detergent doser on the rear of the machine. Detergent dispenser with 5 compartments (pre-wash, wash, bleachers and softeners). Water levels completely modifiable. 3 water inlets (Hot water, Cold water, Soft water). Safety switch for door opening. Wash and spin speeds are configurable.. These machines have electronic control of imbalance with frequency variator, that detects the load uncentered before spinning. Standard frequency: 50-60 Hz. No need to be fixed to the floor. LA-60 TP E WRAS approved product. Model Code Capacity kg Drum Vol. Door Spin speed Power (*) Dimensions (#) (1:9) (1:10) Ø x Depth litres Ø r.p.m. G kw Volt mm LA-45 TP E 19034774 50 45 918x720 450 560 850 350 31,30 X 1.478x1.444x1.905 LA-45 TP HW 19034775 50 45 918x720 450 560 850 350 7,50 X 1.478x1.444x1.905 LA-45 TP S 19034776 50 45 918x720 450 560 850 350 7,50 X 1.478x1.444x1.905 LA-60 TP E 19034356 67 60 1.048x684 600 560 760 350 40,00 X 1.478x1.444x1.905 LA-60 TP HW 19034780 67 60 1.048x684 600 560 760 350 11,00 X 1.478x1.444x1.905 LA-60 TP S 19034781 67 60 1.048x684 600 560 760 350 11,00 X 1.478x1.444x1.905 LA-120 TP HW 19034785 133 120 1.360X840 1200 700 680 350 15,00 X 1.836x1.863x2.245 LA-120 TP S 19034786 133 120 1.360X840 1200 700 680 350 15,00 X 1.836x1.863x2.245 (#) : Heating systems for washer extractors 45-60 - 120 kg: (*) : Standard Voltages for models 45-60 - 120 kg: E : Electrical heating Heated by heating elements X : Code for 400 V III +N (Three-phase) - (Optional 230 V III) HW : Hot water Washing process with hot water. S : Heating by steam in an external generator. Inlet pressure: 4 bar. Transformation to ship voltage Only for electrical heating. Kit transformation ship voltage 440 480 V - III - 50/60 Hz 22
WET CLEANING «WET CLEANING» system incorporated: - Control of temperature - Control of the time - Water levels completely modifiable - Possible manual dosing for every 8 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second Options for LA washer extractors 45-60 - 120 kg Model Code Description KDD-45-60 19004661 Kit double drainage for LA-45 MP, LA-60 MP KME-45-60 19011484 Kit water inlet hose 1 for LA-45, LA-60 KV-45-60 19004574 Kit to transform an E or HW machine (45, or 60 kg) to Steam version KEV-45-60 19004575 KB-60 19005593 KBF-60 19005592 Kit DOUBLE HEATING SYSTEM (Electric + Steam) for electric washer extractors 45 or 60 kg. Reduces 1/3 of the electric power Kit COMPLETE tilting system (REAR and FRONTAL) for LA-60. Includes RL-6. Kit FRONTAL tilting system for LA-60. Includes RL-6. KZ-45-60 19004676 Panel to cover the low space for 45 and 60 kg KDD-120 19004748 Kit double drainage for LA-120 KB-120 19005892 KBF-120 19005891 AUTO WEIGHT 19035704 Kit COMPLETE tilting system (REAR and FRONTAL) for LA-120. Includes RL-6. Kit FRONTAL tilting system for LA-120. Includes RL-6. Weighing sensor System on feet. Includes RL-6. INCONSISTENT WITH THE VERSIONS KB and KBF RL-6 19034838 6 extra signals for automatic liquid dosing. LA-45 230-3 LA-60 230-3 LA-120 230-3 Voltage 230 V - 3 50/60 Hz for LA-45 Voltage 230 V - 3 50/60 Hz for LA-60 Voltage 230 V - 3 50/60 Hz for LA-120 WIFI REMOTE CONTROLE MODULE FOR EXTERNAL MANAGEMENT KB-120 Tilting System Washer Extractor LA-120 TP - Tilting sequence using KB-120 tilting system Back: loading the clothes Vertical: working Forward: discharge of the clothes 23