: V20831H1529X Wash (Heat to 60 C)+1st Rinse (Tap or DI Water)+2nd Rinse (Carb.16L+Mix.16L)+Drying Direct Spray in Air cleaning system: Heating in decanter (see selection), pump, two mechanical filters (10 / 5 µm). 1 st Direct Spray in Air Open Loop rinse which equipped with automatic refilling of tap or DI water and overflow to a sewerage. Pump, mechanical filter (10 / 1 µm) no conductometer 2 nd Direct Spray in Air Closed loop Rinse: chemical filters (16L Active Carbon, 16L Mixbed), 2x mechanical filter (10, 1µm), conductometer incl. Air Blade pressed Heating up to 110 C Base Obligatory choice necessary to select one from a pair of items Power Supply 230/ 400 V, 50-60 Hz (switchboard, wiring) V21031R8077X Machines variants (wiring, appliances) determined for different mains electricity. OR (necessary to choose one of these items) Power Supply 120/ 208 V, 60 Hz (switchboard, wiring) V21531R8689X Pumps 230 V, 50 Hz (liquid management unit) V20931V8957X OR (necessary to choose one of these items) Pumps 230 V, 60 Hz (liquid management unit) V21531V8674X 1
Nozzle arm with air blade (single) V21631A8020X Nozzle system and air blade incl. static fixing system which is able to hold corresponding clamping accessories or the one basic frame see chapter Clamping OR (necessary to choose one of these items) Nozzle arm with air blade Twingo (double) V21631A8046X Nozzle system and air blade incl. static fixing system which is able to hold corresponding clamping accessories or the two basic frame see chapter Clamping (Anti-collision system of nozzle arms including) Control system V31531R8665X OR (necessary to choose one of these items) Control system with traceability (Bar code reader, LAN connective) V31531R8666X Traceability serves to record keeping (register) and monitoring data about washed objects (and baskets) by means of bar code scanner (EEPGRD4130W). Windows Professional OS included. Note: Machine with this option is possible connect to (one) local net (LAN). Heating of Wash Tank to max. temperature 60 C V30831R2532X This option should be configured for processes, which require only slightly higher than room temperature by cleaning (cleaning of glue, some defluxion processes). Higher temperature can be reached, but this takes longer time (installed heater power 4 kw heating of the bath to 60 C). OR (necessary to choose one of these items) Enhanced Heating of Cleaning Tank up to 60 C (Faster Heat Up) V30831R2533X Some PCB defluxion processes may require higher temperature. This option is also for processes, where changes of process temperature should be faster (installed power 8 kw heating of the bath to 60 C). 2
Heating of 1 st rinse tank to max. temperature 40 C V30931V8010X This item should be configured for processes, which require warm water for rough rinsing (installed heater power 4 kw). OR (necessary to choose one of these items) Lid for 1 st rinse tank without heating V31531V8662X Tank of 1 st rinse is without heating, but pump working itself increases temperature. Heating of 2 nd rinse tank to max. temperature 40 C V30931V8011X This item should be configured for processes, which require warm water for final rinsing (installed heater power 4 kw). OR (necessary to choose one of these items) Lid for 2 nd rinse tank without heating V31531V8664X Tank of 1 st rinse is without heating, but pump working itself increases temperature. 3
Option Closed loop for 1st Rinse (Carbon 16L, Mixbed 16L) V21531R8836X Chemical filters (Active Carbon 16L, Mixbed 16L), mechanical filter (10, 1µm) are added into the piping system of rinsing loop. Conductometer is not included. Possible to order separately. Closed loop item is possible to order later or to reverse to open loop. External Closed loop for 1st Rinse (Carbon 39L, Mixbed 39L) V21631R8051X Chemical filters inside external unit (covered carriage) (Active Carbon 39L, Mixbed 39L), NECESSARY to order together with item V21531R8836X Closed loop item is possible to order later or to reverse to open loop External Closed loop for 2nd rinse (Active Carbon 39L, Mixbed 39L) V21631R8052X Chemical filters inside external unit (covered carriage) (Active Carbon 39L, Mixbed 39L), Conductometer for 1 st rinse V30931R8912X For Closed loop Rinse or other external DI water source. 4
Drain pump for 1 st rinse 230V, 50Hz V21431V8514X The pump unit serves to easy pumping of waste water from tank of machine to sewerage, especially when the inlet to sewerage is above the draining tube of machine. Intended for open rinse. Note: Maximal pump capacity is 30 l/min. by 1 m displacement and 2 m hose length, 15 l/min., max. displacement 4 m, outlet tube d 25x2,5. Exhausting fan 230V, 50 Hz V30831O2530X It is to be specified, if customer does not have similar exhaust connection at disposal. The fan is a single phase asynchrony driven radial fan 160 Nm 3 /h, orifice diameter 100 mm. Fan is controlled done by the central controlling unit of Super SWASH. Exhausting fan 230 V, 60 Hz V31531O8690X 60 Hz variant of exhaust ventilator (see above) Exhaust monitoring V30831R2531X This is an under pressure sensor, set on -100 Pa. Not available exhausting switch the alarm signal in situation, when exhausting should work. This option should be choose for machines without integrated exhausting fan, but can work also together with integrated exhausting fan. Handheld Tool for Precleaning of Stencil Appertures by Pressed Air V40731P2887X For cleaning pump print stencils, it is essential to open all apertures before real cleaning cycle starts. After inserting the stencil to the process chamber in front of light wall, the hand-held pressure air tool is used to press the rest of glue from apertures. Cleaning solution can flow through the opening from beginning of cleaning cycle. This can shorten the necessary cleaning time for about 50%. 5
Position monitoring of draining valve V30931R8008X This allows switch manually the piping from the process tank to outside of the machine. It serves to monitoring of drain valve position to the control system to prevent unwanted pumping out from the machine. The same drain valve, but w/o electronic monitoring is included in the basic configuration of the Super SWASH. Handheld Electric Pump for Filling of Machine from Barrel or Canister, 230V, 50/60Hz CEOENVIPEJP125 Washing medium is delivered in barrels or canisters. This pump serves to easy pumping of washing medium from barrel to tank in Super SWASH machine. Handheld Electric Pump for Filling of Machine from Barrel or Canister, 120V, 60Hz CEOENVIPEJP125T Variant with transformer 115 V/ 230 V Signal tower for indication of machine status V31031R8161X Signal tower placed on the top of machine explicit indicates: Process is running (green shining). Process is stopped; some error message is displayed (red blinking + acoustic signal). Process is waiting for operator s intervention (blue shining + acoustic signal). Emergency bath liquid detection V31631V8983X Emergency bath is included in the machine. This item contains sensor which detects liquid in bath Central STOP button V31331K8055X Emergency stop button 6
Software speed control of the nozzles shift of the SuperSwash EESSSWSWSPEEDREG Slowing down of nozzle arm with air blade moving to improve drying process for special application. Only on request! UPS for control system backup V31431R4277X UPS installed into the switchboard ensures a correct machine shutdown for example in case of blackout. SW backup of the CC, SUSW, UNICLEAN, FA23, to USB flash ESWBKPFL Set includes the USB Key with copy of machine SW. Anti-Collision System of Nozzle Arms - only for Nozzle Arm single (in double is in price) V21231F8773X The magnetic sensor protects the moving space of spray and air-knife manifolds again possible collision with any cleaned objects. Reasonable for difficult to clamp, and not precisely defined objects in the cleaning chamber. Possible to be ordered only for Nozzle arm with air blade (single) Nozzle arm with air blade Twingo (double) has anti-collision system of nozzle arms standardly in price. 7
ZESTRON EYE (CMS 4) - continual concentration measuring of Zestron cleaners V31331R8085X Used for concentration measuring of cleaning medium into piping. The set consists of four parts: sensor, controller, power supply adapter and cables. The sensor is calibrated for determined medium from Zestron company. Water softening unit for 1 st rinse V21431R8296X Automatic softening unit serves to treatment of rinsing water prior to input to the machine. Softening station includes the residential valve and brine tank for automatic regeneration of chemical filter (vessel) filling. External unit for automatic refilling of cleaning agent and DI water to keep right level of medium in washing tank. V21531R8837X AAD Automatic Adaptive Dosing of cleaning agent (incl. Zestron EYE) AAD keeps the required concentration value of medium according to real time information from Zestron EYE. V31431Q8295X AD Automatic Dosing of cleaning agent System refills cleaning agent according to set concentration. 8
CLAMPING (for all types) Static fixing system Clamping for stencil glued in frame (any size up to 830 x 816 mm) Firmly mounted in machine Always included in machine price all inclusive Bottom support of frame with thickness 40 mm: from wires, clicked between fixing system sides (1 pc in machine price) Latch reduction: for fixing of frame to thickness 30 mm (1 pc in machine price) All the above mentioned parts are included in machine price! No need to order! Stencil clamping directly into machine CLAMPING FIXED DIRECTLY INTO STATIC FIXING SYSTEM IN THE CHAMBER (BASIC FRAME IS NOT NEEDED): Incl. in machine price V31231M8068X VectorGuard Stencil Holder, adjustable for all types - directly into SuSW&Twingo DEK VectorGuard stencil sheet are protected by al frame which allow to easy slide into PBT VectorGuard stencil holder for cleaning 9
V31231M8671X Holder of Zelflex Protect Stencil 584x584 - directly into SuSW & Twingo & SIA V31231M2593X Tilting Arm Assembly for VectorGuard and Zelflex Stencil Holder - directly into SuSW&Twingo V21631M8957X Holder of Stencil Sheet max718x745mm -NECESSARY to specify Stencil type-directly only to SuSW Please send us the gerber data of stencil or distance among holes and their diameter! V21331M8115X Holder of Stencil Sheet max.710x650mm -NECESSARY to specify Stencil type-directly to SuSW & Twingo & MiSW Please send us the gerber data of stencil or distance among holes and their diameter! V21631M8041X Bottom Support of Frame to thickness 30mm Max dimension of stencil: Incl. in machine price 718 745 Max dimension of stencil: Incl. in machine price 710 650 10
Squeegee clamping directly into machine CLAMPING FIXED DIRECTLY INTO STATIC FIXING SYSTEM IN THE CHAMBER (BASIC FRAME IS NOT NEEDED): V31331M8987X Holder for 2 Squeegees DEK 152 a 115; MPM 100 a 146; Samsung 140 a 160 - directly into SuSW&Twingo Incl. in machine price V31331M8988X Holder for 4 Squeegees: DEK 152 a 115; MPM 100 a 146; Samsung 140 a 160- directly to SuSW&Twingo& MiSW V31331M8038X Holder for 2 Squeegees Samsung (front screw 110-170) - directly into SuSW&Twingo Incl. in machine price V21331M8041X Holder for 4 Squeegees Samsung (front screw 110-170) - directly into SuSW&Twingo& MiSW Incl. in machine price V31331Q8076X Holder for 2 Squeegees MPM Accela 94 - directly into SuSW&Twingo Vertical PCB clamping into basic frame Super SWASH Single (BASIC FRAME HAVE TO BE ORDERED) Incl. in machine price V21531M8842X Basic Frame Super SWASH - usable (inner) dimension 740x772mm 772 740 11
V31331M8834X Bar with double sided spring fingers for PCB into SUSW, MD (distance 50mm) Basic frame Super SWASH not included - necessary to order extra 740 772 V41331M8979X Stop system for Supporting of PCB for Spring Fingers Bar (for Bars into SuSW, Twingo, MiSW) Spring Wires Bar for PCB - into Basic Frame SuSW, MD V31331M8160X (distance 20 mm) Basic frame Super SWASH not included - necessary to order extra 740 772 12
Vertical PCB clamping into basic frame Super SWASH Twingo (BASIC FRAME HAVE TO BE ORDERED) 740 695 V21631M8968X Basic Frame Twingo - usable (inner) dimension 740x695mm Spring Fingers Bar for PCB - into Basic Frame Twingo (distance 50 mm) V31331M8917X Basic frame Super SWASH not included - necessary to order extra 740 695 13
Spring Wires Bar for PCB into Basic Frame Twingo (distance 25 mm) V31331M8139X Basic frame Super SWASH not included - necessary to order extra 740 695 Horizontal PCB clamping into basic frame Super SWASH Single & Twingo V21531M8868X Spring Wires Bar for PCB (T-profile horizontal) into Basic Frame SuSW & Twingo Incl. 16 pcs wire springs (diameter 0.8 mm) V21531M8822X Spring Wires Bar for PCB (Triangle profile horizontal) into Basic Frame SuSW & Twingo Incl. 8 pcs wire springs (diameter 1.0 mm) 14
Wire Basket - Basic Frame SuSW or Twingo is needed W x L x H: V31631M8117X 24 x 727 x 50 mm (Max 8 pcs/ machine) V31631M8982X 24 x 727 x 100 mm (Max 4 pcs/ machine) V31631M8118X 24 x 727 x 170 mm (Max 3 pcs/ machine) Example of max capacity of PCB: V31631M8117X 8 baskets in basic frame V31631M8982X 4 baskets in basic frame V31631M8118X 3 baskets in basic frame Wire Basket - Basic Frame SuSW or Twingo is needed W x L x H: V31631M8119X 34 x 727 x 50 mm (Max 8 pcs/ machine) V31631M8120X 34 x 727 x 100 mm (Max 4 pcs/ machine) V31631M8121X 34 x 727 x 170 mm (Max 3 pcs/ machine) Example of max capacity of PCB: V31631M8119X 8 baskets in basic frame V31631M8120X 4 baskets in basic frame V31631M8121X 3 baskets in basic frame Other (customized) holders can be made on request. Drawing and photos + samples are necessary to design. Price specified after submitting documentation + samples. 15 Aggiornamento a Settembre 2016