T500SL Shear / baler / logger
General description of the Sierra T500SL shear / baler / logger In the world of scrap metal processing, equipment value and capability are essential to a profitable business, and the Sierra T500SL delivers on both counts. A 500 ton shear, baler and logger that s sized perfectly for cost-conscious operators. From its rugged self-framed construction, to its automated shearing, baling and logging cycles, the Sierra 500SL incorporates features found in machines much more costly. Our highly efficient hydraulic and power unit allow our customers to prepare their material with a very low cost per ton ratio. This means a higher operational margin and a higher profit. The production capacity of this machine is unique for a machine of this segment.
Power unit The advanced Sierra technology enables us to reach high production levels with only a 260 HP engine. This translates into low processing costs. The power unit of all Sierra machines has been designed in such a way that the least possible amount of energy is needed to obtain the highest possible output ratio. The machine is diesel driven. DIESEL DRIVEN T500SL: Diesel engine Brand 260 HP CATERPILLAR
Hydraulic unit The T500SL shear, baler and logger uses top of the line Rexroth pumps, components and a Denison distributor block. This combination guarantees the best possible speed with low energy consumption. A combination of a Rexroth variable displacement pump with a Denison vane pump is found on all Sierra shears. The Denison pump is used for low pressure and speed (return of all cylinders) while the Rexroth will work when pressure and speed is needed. This combination has proven to be very efficient and has been adopted on the vast majority of our products. The distributor block is PLC controlled in order to enable best possible performance. Rexroth variable displacement piston pumps 1 Denison vane pumps 1 Working pressure 350 bar max. Pressure relieve system included Oil tank capacity 1.800 l Oil cooling included Oil heating included Filtration system with 10 Micron magnet filters included
Control unit Ergonomic controls and a unique self diagnostic system enable a reliable and fast operation of the T500SL The unparalleled superiority of the Allen Bradley PLC (Rockwell group) has proven to be the most reliable PLC in the industry. It is particularly well suited for the scrap yard environment where vibrations, dirt, dust and humidity prove to be fatal to most electronic systems. Valves are controlled by the PLC in order to give the best possible performance. The control panel is situated on the cabin which contains all electrical components of the machine. This unit is located inside the operators cabin.
Charging box The unique Sierra charging box design enable to size material quickly and to close the box without losing precious time. The production capacity of any shear is determined by the amount of time needed to closed the charging box. All Sierra charging boxes are fully lined with thick Hardox 400 plates. Charging box open length 5.000 mm width 2.250 mm Charging box closed length 5.000 mm width 800 mm height 600 mm Feed and bale cylinder Flat lid force Curved lid force 140 t 180 t 180 t Due to the curved lid design the volume of the open box is bigger than any other competing product. Three cylinders per lid give the T500SL ample force to size any kind of material.
The hinges are never exposed to scrap when the box is closed. This is the case on most competing machines. Replacement of the hinges is a very expensive and time consuming issue. Downtime of weeks must be calculated for this repair. With the unique Sierra design replacement is not necessary as hinges are not subject to wear. The hydraulic stabilizers are built in such a way that the machine can be easily lifted on a trailer. The solid and heavy electro welded structure has to meet very strict quality control procedures. All welds are checked by ultrasound in order to assure a long lifetime.
Shearhead This solid construction contains the hold down clamp and the guillotine. Both moving parts are automatically lubricated. The most important components of any shear are the hold down clamp and the guillotine. Sierra protects these parts by using bronze replaceable liner plates. Only this system will guarantee a long life time to these important components. Shear force Hold down 500 ton 120 ton Blade width 880 mm Shear throat width 880 mm height 660 mm
Dimensions and weight Overall length 13.570 Overall width 2.500 Overall height 3.530 Weight approx. 58 ton
Productivity information Cutting capacity: 10/15 tons per hour The cutting capacity varies based on type of material and cutting length Baling capacity: 8/13 tons per hour The baling capacity varies based on type of material Logging capacity: 8/15 tons per hour The logging capacity varies based on type of material Cuts per minute empty cycle 5 Cuts per minute with 600 mm cuts 4 Bale and log sizes 800 x 600 mm x Var. Average bale density 1.000 kg/m 3 Average log density 450 kg/m 3
Standard features Some of the standard features of the Sierra T500SL which are extras on most competing machines: Preload table Hold down clamp Bronze liners on guillotine and hold down clamp Autolube of guillotine and hold down clamp Hardox 400 anti wear liners
Remote control Spare parts availability Installation and training Service
Comparison sheet In order to properly compare products you can use the enclosed comparison sheet. SHEARHEAD Real shear force Hold down clamp Bronze liners Scrap ejection slide Automatic lubrication Reduced stroke Sierra T500SL 500 ton Option CHARGING BOX Cylinders per lid 3 Box length 5.000 mm Hardox 400 liners Preload table HYDRAULIC UNIT Oil-recirculation Denison distributor Rexroth valves Rexroth piston pumps Magnet filters Oil heater Oil cooler CONTROL UNIT Large cabin Allen Bradley PLC Remote control OTHERS Installation and training Local service Spare parts availability Warranty 10 Microns 24-48 hours Immediate Total warranty on site all inclusive The competition offers the above only as extras in order to keep the base price low. Since we know that the above is needed in order to run a profitable organisation we have included everything as a standard feature!