Accreditation Manager. Copper and copper alloy waste fittings

Similar documents
Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous

Performance of household electrical appliances-refrigerating. EN Domestic cooking appliances burning gas - Part 1-1: Safety - General

Address 3255 Pepper Ln., Suite 112 Las Vegas, NV 89120, USA

EN Light And Lighting - Measurement And Presentation Of Photometric Data Of Lamps And Luminaires - Part 1: Measurement And File Format

10.6 Schedule of Accreditation

CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES

Standard for tests for flammability of plastic materials for parts in devices and appliances

8501 E. Pleasant Valley Rd. Cleveland, OH 44131

LIST OF PUBLISHED STANDARDS

IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014

(Text with EEA relevance) Reference and title of the harmonised standard (and reference document) EN 26:1997/A1:2000 Note 3 Date expired (18.7.

13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations

Fluorescent Lamps - Guide for Electrical Measurements

13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Manager Accreditations

Evaluation of properties of polymeric materials. Enclosed and dead-front switches (tri-national standard with NMX-J-162-ANCE-2016 and UL 98)

Deemed to Comply Standards

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

10.6 Scope of Accreditation

10.6 Schedule of Accreditation

Gas (Safety and Measurement) Amendment Regulations 2014

List of Harmonised Standards for EEE. Household and similar electrical appliances- Safety Part 1: General requirements

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Summary of Substantive Changes between the 2012 and 2018 editions of ASME A /CSA B125.1 Plumbing Supply Fittings

An Urgent Bulletin from CSA Group

Completed Projects / Projets terminés

10.6 Schedule of Accreditation

Declaring Definitions for Electrical Products 7 March 2014

Laboratory Authorization Certificate

SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT

Controlled Goods Definitions Safety Standards

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

NSW Government Notice

Gas Equipment. Volume 3 April Issue date: April 29, 2009

SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012

10606 Bloomfield Ave Santa Fe Springs, CA USA

Declaring Definitions for Electrical Products Gazetted: 18 November 2016

333 Pfingsten Road Northbrook, Illinois 60062

Wattage Estimation Guide

SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT

Listing of Water Heater Standards

Exhibit A. Mechnical, Plumbing, and Electrical Plan Check and Inspection Fees. Total Cost Per Unit FEE TYPES MECHANICAL PERMIT FEES

CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018,

Read Only Copy Not For Distribution. Chapter 19. Referenced Standards 19.1 REFERENCED STANDARDS 19.2 STANDARDS ORGANIZATIONS

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications

For more information on the MARR program or any questions on the product list, please refer to or contact MARR at

DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

- Full test except clause (IPX1 IPX2) (Oxygen bomb test) and annex ต

TABLE OF CONTENTS. Part I Administrative... 1

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Safety Standards for Electronic Products

European Standards moved from the Low Voltage Directive to the Machine Directive

24 (Second Section) OFFICIAL BULLETIN Friday, September 10, 2010

MECHANICAL EXHAUST VENTILATION SYSTEMS OPERATIONAL GUIDELINES-REVISED 2003

PLUMBING FIXTURES CHAPTER 27

SPECIFIC APPLIANCES CHAPTER 6

Government Notices

SCHEDULE OF FEES. Penalty Fees. Building Fee Schedule FEE

Completed Projects / Projets terminés

DOCUMENT TABLE OF CONTENTS

CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT

Design and Construction Standards SECTION PLUMBING EQUIPMENT

Notice That Particular Low Voltage or Extra-low Voltage Fittings or Appliances are Declared Medium Risk Articles

Consumer Protection (Safety Requirements) (Amendment) Regulations 2017

First Catalogue of Products Subject to Compulsory Certification

SCOPE OF ACCREDITATION

Bill de Blasio, MAYOR. build safe live safe. Rick D. Chandler P.E., COMMISSIONER

CERTIFICATION BODY ACCREDITATION PROGRAM QUALITY AUDITING INSTITUTE

De accreditatie werd uitgereikt aan/ L'accréditation est délivrée à/ The accreditation is granted to/ Die akkreditierung wurde erteilt für:

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

DETAIL OF NOTIFICATION SCOPE GSO Technical Regulation. Gulf Technical Regulation for Low Voltage Electrical Equipment and Appliances (BD )).

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION

IAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany

Gas Safety. Syllabus. For. Gas Appliance Service. Certificate of Qualification Examination. (Formerly Class C)

SECTION PLUMBING EQUIPMENT

Listing of standards providing presumption of conformity for List (2) products under Regulation BD

DUKE UNIVERSITY CONSTRUCTION STANDARDS

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

TABLE OF CONTENTS. Part I Administrative

SPECIFIC APPLIANCES CHAPTER 6

SPECIFIC APPLIANCES CHAPTER 6

Standard Name Standard number Adopted standard

NO NONSENSE POWER. A compact and powerful unit designed and engineered to deliver power and performance at a competitive price.

Energy Efficiency Labelling

Mobile Vendors Bulletin

NFPA 54 UPDATE. Paul Cabot American Gas Association

Installation Instructions

10.6 Schedule of Accreditation

2016 CALIFORNIA CODES KITCHEN, BATH & LAUNDRY REMODEL REQUIREMENTS

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

TABLE OF CONTENTS. Part I Administrative... 1

Transcription:

IAS Accreditation Number Company Name Address Contact Name Telephone +86 20-8732-0648 Effective Date of Scope April 3, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-464 CCIC-CSA International Certification Co., LTD No. 10, KeYan Road, Science Park Luo Gang District, Guangzhou Guangdong 510663 People s Republic of China Wayne Thomas Accreditation Manager EPA WaterSense Plumbing Specifications - Showerheads - Tank Type High Efficiency Toilets - Flushing Urinals - High Efficiency Lavatory Faucets - Commercial PRSV Plumbing Products AS 1589 AS 1756 AS 2887 Copper and copper alloy waste fittings Household sinks Plastic waste fittings AS 3498 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks AS 3688 AS/NSZ 1730 AS/NSZ 3662 Water supply and gas systems - Metallic fittings and end connectors Washbasins Performance of showers for bathing International Accreditation Service, Inc. 3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A Telephone +1 562-364-8201 IASInfo@iasonline.org www.iasonline.org Page 1 of 46

ASME A112.1016/CSA B125.16 ASME A112.18.1/CSA B125.1 ASME A112.18.2/CSA B125.2 ASME A112.18.6 ASME A112.18.6/CSA B125.6 ASME A112.19.1 ASME A112.19.1/CSA B45.2 ASME A112.19.10 ASME A112.19.2/CSA B45.1 ASME A112.19.3/CSA B45.4 ASME A112.19.5/CSA B45.15 ASME A112.4.14:2004 (R2010) ASME A112.4.2/CSA B45.16 ASME A112.6.3 (2016) Performance requirements for automatic compensating valves for individual showers and tub/shower combinations Plumbing supply fittings Plumbing waste fittings Flexible water connectors Flexible water connectors Enamelled cast iron and enamelled steel plumbing fixtures Enamelled cast iron and enamelled steel plumbing fixtures Retrofit Dual Flush Devices for Water Closets Ceramic plumbing fixtures Stainless steel plumbing fixtures Flush valves and spuds for water closets, urinals, and tanks Manually operated valves for use in plumbing systems Personal hygiene devices for water closets Floor Drains and Trench Drains ASSE 1001 (2017) Performance Requirements for Atmospheric Type Vacuum Breakers ASSE 1002/ASME A112.1002/CSA B125.12 Anti-siphon fill valves for water closet tanks ASSE 1011 (2004) Performance Requirements for Hose Connection Vacuum Breakers ASSE 1014 ASSE 1016-2011 ASSE 1017 ASSE 1061 Performance Requirements for Backflow Prevention Devices for Hand-Held Showers Performance requirements for automatic compensating valves for individual showers and tub/shower combinations Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems Performance Requirements for Push-Fit Fittings TL-464 Page 2 of 46

ASSE 1069 Performance Requirements for Automatic Temperature Control Mixing Valves ASSE 1070/ASME A112.1070/CSA B125.70 Performance requirements for water temperature limiting devices ATS 5200.101 Technical Specification for plumbing and drainage products - Appliances (low hazard rating) ATS 5200.489 Technical Specification for plumbing and drainage products - Stainless steel flexible assemblies for plumbing applications CSA B125.3 CSA B137 series CSA B181.1 CSA B181.2 CSA B45.0 CSA B45.11 CSA B45.3 CSA B45.5 CSA B64.1.1 CSA B64.2 (2011) CSA B79 (2008) D1785 D2241 D2466 Plumbing fittings Thermoplastic pressure piping compendium ABS Drain, Waste, and Vent Pipe and Pipe Fittings PVC Drain, Waste, and Vent Pipe and Pipe Fittings General Requirements for Plumbing Fixtures Glass plumbing fixtures Porcelain-Enamelled Steel Plumbing Fixtures Plastic plumbing fixtures Atmospheric vacuum breakers (AVB) Hose connection vacuum breakers (HCVB) Commercial and residential drains and cleanouts Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 D2661 Standard Specification for Acrylonitrile-Butadiene- Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings TL-464 Page 3 of 46

EN1111 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification EN1112 Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification EN13310 Kitchen sinks - Functional requirements and test methods EN14428 EN14527 Shower enclosures - Functional requirements and test methods Shower trays for domestic purposes EN14688+B3:F40 Sanitary appliances - Wash basins - Functional requirements and test methods EN200 Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification EN274-1 WASTE FITTINGS FOR SANITARY APPLIANCES.PART 1: REQUIREMENTS. EN31 EN33 Wash basins - Connecting dimensions WC pans and WC suites - Connecting dimensions EN817 Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications EN997 F1807 F876 F877 IAPMO IGC 154 IAPMO IGC 172 IAPMO IGC 258 WC pans and WC suites with integral trap Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing Standard Specification for Crosslinked Polyethylene (PEX) Tubing Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems Shower and Tub/Shower Enclosures, Bathtubs with Glass Pressure-Sealed Doors, and Shower/Steam Panels GLASS LAVATORIES, SINKS AND COUNTER TOPS Low Flow Laundry Faucet TL-464 Page 4 of 46

IAPMO/ANSI Z1157 IAPMO/ANSI Z124.1.2 IAPMO/ANSI Z124.5 IAPMO/ANSI Z124.6 Ball Valves PLASTIC BATHTUB & SHOWER UNITS Plastic Toilet Seats Plastic Sinks NSF/ANSI 14 Plastics Piping System Components and Related Materials OCCUPATIONAL SAFETY Portable and Mobile Ladders ANSI ASC A14.2 Ladders - Portable Metal - Safety Requirements ANSI ASC A14.5 Ladders - Portable Reinforced Plastic - Safety Requirements ANSI ASC A14.7 Mobile Ladder Stands and Mobile Ladder Stand Platforms CSA Z11 Portable ladders Protective Footwear ASTM F2413 CAN/CSA Z195 CAN/CSA Z334 EN 12568 (2010) Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear Protective footwear Over-the-shoe toe protectors Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts EN ISO 13287 Personal protective equipment - Footwear - Test method for slip resistance EN ISO 20344 EN ISO 20345 EN ISO 20346 EN ISO 20347 EN 50321 AS/NZS 2210.2 2009 Personal protective equipment - Test methods for footwear Personal protective equipment - Safety footwear Personal protective equipment - Protective footwear Personal protective equipment - Occupational footwear Electrically insulating footwear for working on low voltage installations Occupational protective footwear - Test methods (ISO 20344:2004, MOD) (except clauses 5.17 & 6.11) TL-464 Page 5 of 46

AS/NZS 2210.3 2009 Occupational protective footwear - Specification for safety footwear (ISO 20345:2004, MOD) Labels CSA C22.2 No. 0.15-15 UL 969 Adhesive labels UL Standard for Safety Marking and Labeling Systems Functional safety CSA C22.2 NO. 0.8 Safety functions incorporating electronic technology UL 991 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices UL1998 UL Standard for Safety Software in Programmable Components Gas Controls ANSI Z21.77/CSA 6.23 ANSI Z 21.78/CSA 6.20 ANSI Z21.15/CSA 9.1 ANSI Z21.18/CSA 6.3 ANSI Z21.21/CSA 6.5 ANSI Z21.24/CSA 6.10 Manually Operated Piezo-Electric Spark Gas Ignition Systems and Components Combination gas controls for gas appliances Manually operated gas valves for appliances, appliance connector valves and hose end valves Gas Appliance Pressure Regulators Automatic valves for gas appliances Connectors for gas appliances ANSI Z21.41/CSA 6.9 Quick disconnect devices for use with gas fuel appliances ANSI Z21.80/CSA 6.22 ANSI Z21.81/CSA 6.2 ANSI Z21.92/CSA 6.29 ANSI Z21.69/CSA 6.16 ANSI LC 1/CSA 6.26 ANSI Z21.20 Line pressure regulators Cylinder Connection Devices Manually Operated Electric Gas Ignition Systems and Components Connectors for moveable gas appliances Fuel gas piping systems using corrugated stainless steel tubing Automatic Gas Ignition Systems and Components TL-464 Page 6 of 46

ANSI Z21.20/CSA 60730-2-5 ANSI Z21.23 ANSI Z21.54/CSA 8.4 ANSI Z21.93/CSA 6.3 AS 2613 AS 4617 AS 4618 AS 4619 AS 4620/AG204 AS 4621 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems Gas appliance thermostats Gas hose connectors for portable outdoor gas-fired appliances Excess flow valves for natural and propane gas with pressures up to 5 psig Safety devices for gas cylinders Manual shut off gas valves Gas appliance regulators Gas appliance thermostats Thermoelectric flame safeguards Regulators for use with liquefied petroleum Vapour phase AS 4622 Electrical and electronic ignition devices for gas appliances AS 4624 AS 4627 AS 4629/AG 214 AS 4631 AS/NZS 1869 ASME B16.33 ASME B16.38 ASME B16.44 CAN1-6.4 CGA CR91-002 Combination controls for gas Quick-connect devices for gas Automatic shut off valves and vent valves Limited flexibility connectors for gas Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS 1/2 Through NPS 2) Large Metallic Valves for Gas Distribution - Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi Automatic Gas Ignition Systems and Components Manually Operated Gas Valves For Use on Piping TL-464 Page 7 of 46

CSA 3.16 CSA 8.1 CSA 8.3 DS/EN 161 EN 1106 Lever operated non-lubricated gas shut-off valves Elastomeric composite hose and hose couplings for conducting propane and natural gas Thermoplastic hose and hose couplings for conducting propane and natural gas Automatic shut-off valves for gas burners and gas appliances Manually operated taps for gas burning appliances EN 125 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices EN 126 Multifunctional controls for gas burning appliances EN 12864 Low-pressure, nonadjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures EN 13611 EN 16129 EN 257 EN 298 EN 88-1 EN 88-2 UL 119 UL 144 UL 21 Safety and control devices for gas burners and gas burning appliances - General requirements Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures Mechanical thermostats for gas-burning appliances Automatic burner control systems for burners and appliances burning gaseous or liquid fuels Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kpa Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar Outline of Investigation for Adapters, Fittings and Couplings for Anhydrous Ammonia and Fuel Gases UL Standard for Safety LP-Gas Regulators Standard for LP-Gas Hose TL-464 Page 8 of 46

UL 569 UL Standard for Safety Pigtails and Flexible Hose Connectors for LP-Gas Gas Appliances 10CFR430 Appendix E to Subpart B Test method for measuring the energy consumption of water heaters AGA Requirement 8-96 ANSI Z21.1/CSA 1.1 ANSI Z21.10.1/CSA 4.1 ANSI Z21.10.3/CSA 4.3 ANSI Z21.11.2 ANSI Z21.13/CSA 4.9 ANSI Z21.19/CSA 1.4 ANSI Z21.42 ANSI Z21.5.1/CSA 7.1 ANSI Z21.5.2/CSA 7.2 ANSI Z21.57 ANSI Z21.58/CSA 1.6 ANSI Z21.63/CSA 11.3 ANSI Z21.72/CSA 11.2 ANSI Z21.73/CSA11.1 ANSI Z21.74/CSA 11.4 ANSI Z21.89/CSA 1.18 ANSI Z21.96/CSA 11.6 ANSI Z21.97/CSA 2.41 ANSI Z83.11/CSA 1.8 Gas-fired decorative illuminating appliances for outdoor installation Household Cooking Gas Appliances Gas Water Heaters - Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or Less Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous Gas-fired room heaters, volume II, unvented room heaters Gas-fired low pressure steam and hot water boilers Refrigerators Using Gas Fuel Gas-Fired Illuminating Appliances Gas Clothes Dryers - Volume 1, Type 1 Clothes Dryers Gas Clothes Dryers - Volume II, Type 2 Clothes Dryers Recreational Vehicle Cooking Gas Appliances Outdoor cooking gas appliances Portable type gas camp heaters Portable type gas camp stoves Portable type gas camp lights Portable Refrigerators Outdoor cooking specialty gas appliances Portable water heaters for outdoor use Outdoor decorative gas appliances Gas food service equipment TL-464 Page 9 of 46

ANSI Z83.20/CSA 2.34 Gas-Fired Tubular and Low-Intensity Infared Heaters ANSI Z83.21/CSA C22.2 No. 168 Commercial Dishwashers, Includes Update No. 1 ANSI Z83.26/CSA 2.37 ANSI Z83.7/CSA 2.14 ANSI Z83.8/CSA 2.6 AS 2658 AS 4551 AS 4553 AS 4554 AS 4555 AS 4557 AS 4558/AG 108 Gas-fired outdoor infrared patio heaters Gas-fired Construction heaters Gas unit heaters, gas packaged heaters, gas utility heaters and gas-fired duct furnaces LP gas portable and mobile appliances - excluding: wind test with clause B39 Domestic gas cooking appliances Gas space heating appliances Gas laundry dryers Domestic gas refrigerators Domestic outdoor gas barbecues Decorative gas log and other fuel effect appliances AS 4563 (limited to wind velocity less than 50 km/h) Commercial catering gas equipment AS 4565 AS 4643 AS 5262/AG 404 AS 5263.0 Radiant gas heaters for outdoor and non-residential indoor use Overhead radiant tube gas heaters LP Gas mobile industrial direct fired air heaters Gas appliances, general requirements AS/NZS 5263.1.1 Gas appliances Part 1.1: domestic gas cooking appliances AS/NZS 5263.1.2 AS/NZS 5263.1.3 Gas appliances part 1.2: gas fired water heaters for hot water supply and/or central heating Gas appliances part 1.3: gas space heating appliances AS/NZS 5263.1.7 Gas appliances part 1.7: domestic outdoor gas barbecues AS/NZS 5263.1.8 Gas appliances - Part 1.8: Decorative effect gas appliances TL-464 Page 10 of 46

CAN1-1.16-M79 CAN1-2.15 CAN1-2.23 CAN3-B140.9.3-M86 CGA 2.29 CSA B140.0-03 CSA B140.8-1967 Propane Fired Cooking Appliances for Recreational Vehicles Gas-fired domestic lighting appliances Gas-Fired Portable Infra-Red Heaters Portable Kerosine-Fired Heaters Hand-Held Torches for Fuel Gases Oil-Burning Equipment: General Requirements Portable Industrial Oil-Fired Heaters CSA International Requirement 4.98 U.S. Gas-fired portable heaters for recreational and commercial DS/EN 14543 Specifications for dedicated liquid gas appliancesparasol patio heaters- flueless radiant heaters for outdoor or amply ventilated area use DS/EN 437 Tests gases- test pressures- appliance categories EN 13203-2 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption EN 203-1 EN 203-2-1 EN 203-2-10 EN 203-2-11 EN 203-2-2 EN 203-2-3 EN 203-2-4 EN 203-2-6 Gas heated catering equipment- general safety rules Gas heated catering equipment- specific requirementsopen burners and wok burners Gas heated catering equipment. Specific requirements. Chargrills Gas heated catering equipment part 2-11: specific requirements pasta cookers Gas heated catering equipment- specific requirementsovens Gas heated catering equipment part 2-3: specific requirements - boiling pans Gas heated catering equipment part 2-4: specific requirements fryers Gas heated catering equipment part 2-6: specific requirements hot water heaters for beverage EN203-2- 8 Gas heated catering equipment part 2-8: specific requirements brat pans and paëlla cookers TL-464 Page 11 of 46

EN 203-2-7 EN 203-2-8 EN 203-2-9 EN 203-3-3 Gas heated catering equipment. Specific requirements. Salamanders and rotisseries Gas heated catering equipment - part 2-8: Specific requirements - brat pans and paëlla cookers Gas heated catering equipment- specific requirementssolid tops, warming plates and griddles Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects EN 26 Gas-fired instantaneous water heaters for the production of domestic hot water EN 30-1-1 Domestic cooking appliances burning gas- safety - general EN 30-2-1 EN 416-1 EN 419-1 EN 449 EN 461 EN 484 EN 497 EN 498 EN 509 EN 521 Domestic cooking appliances burning gas- rational use of energy- general Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) Specification for dedicated liquefied petroleum gas appliances flueless non-domestic space heaters not exceeding 10 Kw Specification for dedicated liquefied petroleum gas appliances- independent hotplates, including those incorporating a grill for outdoor use Specification for dedicated liquefied petroleum gas appliances- multi-purpose boiling burners for outdoor use Specification for dedicated liquefied petroleum gas appliances- Barbecues for outdoor use contact grills included Decorative fuel-effect gas appliances Specification for dedicated liquefied petroleum gas appliances- portable vapour pressure liquefied petroleum gas appliances TL-464 Page 12 of 46

EN 732 GSO 1049 GSO 1050 IAS U.S. Requirements 9-96 NSF/ANSI 2 NSF/ANSI 4 NSF/ANSI 5 SANS 1539 SASO 167 SASO 168 UAE.S GSO 1049 UAE.S GSO 1050 UL 147 UL 733 ULC/ORD-C2728 Specifications for dedicated liquefied petroleum gas appliances. Absorption refrigerators Methods of test for domestic cookers for used with liquefied petroleum gases Domestic cookers for used with liquefied petroleum gases Portable outdoor illuminating appliances Food Equipment Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transport Equipment Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment Appliances Operating On Liquefied Petroleum Gas (Lpg) Or Natural Gas (Ng) - Safety Aspects Methods of test for domestic cookers for used with liquefied petroleum gases Domestic cookers for used with liquefied petroleum gases Methods of test for domestic cookers for used with liquefied petroleum gases Domestic cookers for used with liquefied petroleum gases Hand-Held Torches for Fuel Gases Oiled-Fired Air Heaters and Direct-Fired Heaters Pellet Fuel Burning Cooking Appliances Electrical Appliances and Accessories C 22.2 No. 94 Enclosures for electrical equipment, environmental considerations (Tri-national standard with NMX-J- 235/2-ANCE-2015 and UL 50E) C22.2 No 205 Signal equipment C22.2 No. 100 Motors and generators (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A) C22.2 No. 108 Liquid pumps C22.2 No. 147 Motor-operated gardening appliances TL-464 Page 13 of 46

C22.2 No. 21 Cord sets and power-supply cords (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA (300Vac/dc 30A) C22.2 No. 24 Temperature-indicating and -regulating equipment C22.2 No. 247 Operators and systems of doors, gates, draperies and louvres C22.2 No. 33 Construction and Test of Electric Cranes and Hoists C22.2 No. 55 Pecial use switches (except Clauses 6.10,6.14, and 6.15) C22.2 No. 64-10 Household cooking and liquid-heating appliances C22.2 No. 66.1/66.2/66.3 Low Voltage Transformers - Part 1: General Requirements (Bi-National standard, with UL 5085-1) (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc, 30A]) C22.2 No. 71.2 Electric bench tools C22.2 No. 73 Construction and Test of Electrically Equipped Machine Tools C22.2 No. 77 Motors with inherent overheating protection (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A. No ability to perform Clause 5.8 Limited short-circuit test) C22.2 No. 94.1 Enclosures for electrical equipment, non-environmental considerations (Tri-national standard with NMX-J- 235/1-ANCE-2015 and UL 50) C22.2 No. 94.2 Enclosures for electrical equipment, environmental considerations (Tri-national standard with NMX-J- 235/2-ANCE-2015 and UL 50E) C22.2 No.107.1 Power conversion equipment C22.2 No.107.2 Battery Chargers C22.2 No.109 Commercial cooking appliances C22.2 No.113 Fans and ventilators C22.2 No.120 Refrigeration equipment C22.2 No.139 Electrically operated valves C22.2 No.140.3 Refrigerant-containing components for use in electrical equipment TL-464 Page 14 of 46

C22.2 No.153 Electrical quick-connect terminals (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc,30A]) C22.2 No.158 Terminal blocks (except Clauses 6.10, and 6.13) C22.2 No.164 Electric sauna heating equipment (except Clause 10.2.2) C22.2 No.182.3 Special use attachment plugs, receptacles and connectors (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc,30A]) C22.2 No.188 Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE)(except Clauses 7.10, 7.11, 7.14) C22.2 No.223 Power supplies with extra-low-voltage class 2 outputs (except Hot Flaming Oil) C22.2 No.243 Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) C22.2 No.36 Hairdressing equipment C22.2 No.42 General use receptacles, attachment plugs, and similar wiring devices (except Clauses 8.11, 8.12, 8.13, 8.14, 8.22, 8.26, 8.27, 8.28, 8.29, 8.34) C22.2 No.46 Electric air-heaters (except Clauses 6.16 and 6.17) C22.2 No.61 Household cooking ranges C22.2 No.63 Household refrigerators and freezers C22.2 No.68 Motor-operated appliances (household and commercial) C22.2 No.72 Heater elements CAN/CSA-C22.2 No.60745-1 CAN/CSA-C22.2 No.60745-2-1 CAN/CSA-C22.2 No.60745-2-11 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements (Bi-National standard, with UL 60745-1) Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills (Bi-National standard, with UL 60745-2-1) Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws (Bi-National standard, with UL 60745-2-11) TL-464 Page 15 of 46

CAN/CSA-C22.2 No.60745-2-12 CAN/CSA-C22.2 No.60745-2-13 CAN/CSA-C22.2 No.60745-2-14 CAN/CSA-C22.2 No.60745-2-15 CAN/CSA-C22.2 No.60745-2-16 CAN/CSA-C22.2 No.60745-2-17 CAN/CSA-C22.2 No.60745-2-18 CAN/CSA-C22.2 No.60745-2-19 CAN/CSA-C22.2 No.60745-2-2 CAN/CSA-C22.2 No.60745-2-20 CAN/CSA-C22.2 No.60745-2-21 CAN/CSA-C22.2 No.60745-2-22 CAN/CSA-C22.2 No.60745-2-23 CAN/CSA-C22.2 No.60745-2-3 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators (Bi-National standard, with UL 60745-2-12) Hand-held motor operated electric tools - Safety - Part 2-13: Particular requirements for chain saws (Bi- National standard, with UL 60745-2-13) Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers (Bi-National standard, with UL 60745-2-14) Hand-held motor operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (Binational standard, with UL 60745-2-15) Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers (Bi-national standard, with UL 60745-2-16) Hand-held motor operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers (Bi-national standard, with UL 60745-2-17) Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools (Bi- National standard, with UL 60745-2-18) Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches (Bi-National standard, with UL 60745-2-2) Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools Hand-Held Motor-Operated Electric Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and TL-464 Page 16 of 46

Disk-Type Sanders (Bi-National standard, with UL 60745-2-3) CAN/CSA-C22.2 No.60745-2-4 CAN/CSA-C22.2 No.60745-2-5 CAN/CSA-C22.2 No.60745-2-6 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type (Bi-National standard, with UL 60745-2-4) Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws (Binational standard, with UL 60745-2-5 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers (Bi-National standard, with UL 60745-2-6) CAN/CSA-C22.2 No.60745-2-7 Hand-held motor-operated electric tools. Part 2: Particular requirements for spray guns for nonflammable liquids CAN/CSA-C22.2 No.60745-2-8 CAN/CSA-C22.2 No.60745-2-9 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers (Bi-National standard, with UL 60745-2-8) Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers (Bi-National standard, with UL 60745-2-9) CAN/CSA-E60730-1 Automatic electrical controls Part 1: General requirements (Adopted IEC 60730-1:2013, fifth edition, 2013-11, with Canadian deviations) CAN/CSA-E60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls (Adopted IEC 60730-2-9:2008, edition 3:2008 consolidated with amendment 1:2011, with Canadian deviations) CSA C22.2 No. 1335.1 Portable Electrical Motor-Operated and Heating Appliances: General Requirements CSA C22.2 No. 1335.2 Portable Electrical Motor-Operated and Heating Appliances; Particular Requirements CSA SPE 1000 Model Code for the field evaluation of electrical equipment IEC 60745-1 IEC 60745-2-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements Hand-held motor-operated electric tools Safety Part 2-1: Particular requirements for drills and impact drills TL-464 Page 17 of 46

IEC 60745-2-11 IEC 60745-2-12 IEC 60745-2-13 IEC 60745-2-14 IEC 60745-2-15 IEC 60745-2-16 IEC 60745-2-17 IEC 60745-2-18 IEC 60745-2-19 IEC 60745-2-2 IEC 60745-2-20 IEC 60745-2-21 IEC 60745-2-22 IEC 60745-2-23 IEC 60745-2-3 IEC 60745-2-4 Hand-held motor-operated electric tools Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Hand-held motor-operated electric tools Safety Part 2-12: Particular requirements for concrete vibrators Hand-held motor-operated electric tools Safety Part 2-13: Particular requirements for chain saws Hand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planers Hand-held motor-operated electric tools Safety Part 2-15: Particular requirements for hedge trimmers Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers Hand-held motor-operated electric tools Safety Part 2-17: Particular requirements for routers and trimmers Hand-held motor-operated electric tools Safety Part 2-18: Particular requirements for strapping tools Hand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointers Hand-held motor-operated electric tools Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches Hand-held motor-operated electric tools Safety Part 2-20: Particular requirements for band saws Hand-held motor-operated electric tools Safety Part 2-21: Particular requirements for drain cleaners Hand-held motor-operated electric tools Safety Part 2-22: Particular requirements for cut-off machines Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary tools Hand-held motor-operated electric tools Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Hand-held motor-operated electric tools Safety Part 2-4: Particular requirements for sanders and polishers other than disk type TL-464 Page 18 of 46

IEC 60745-2-5 IEC 60745-2-6 IEC 60745-2-7 IEC 60745-2-8 IEC 60745-2-9 Hand-held motor-operated electric tools Safety Part 2-5: Particular requirements for circular saws Hand-held motor-operated electric tools Safety Part 2-6: Particular requirements for hammers Hand-held motor-operated electric tools Safety Part 2-7: Particular requirements for spray guns for nonflammable liquids Hand-held motor-operated electric tools Safety Part 2-8: Particular requirements for shears and nibblers Hand-held motor-operated electric tools Safety Part 2-9: Particular requirements for tappers IEEE 112 Standard Test Procedure for Polyphase Induction Motors and Generators IEEE 114 NFPA 79 UL 1004-1 UL 1004-2 UL 1004-3 UL 1004-6(2nd Edition) UL 1004-8(2nd Edition) UL 1017 Test Procedure for Single-Phase Induction Motors Electrical Standard for Industrial Machinery Rotating Electrical Machines General Requirements Impedance Protected Motors Thermally Protected Motors (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A. No ability to perform Clause 37 Limited short-circuit test) Servo and Stepper Motors Inverter Duty Motors Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines UL 1026 Household Electric Cooking and Food Serving Appliances UL 1054 Special-Use Switches (except Section 21) UL 1059 UL 1081 UL 1082 UL 1278 UL 1310 Terminal Blocks Swimming Pool Pumps, Filters, and Chlorinators Household Electric Coffee Makers and Brewing-Type Appliances Movable and Wall- or Ceiling-Hung Electric Room Heaters (except Par 57) Class 2 Power Units (except Hot Flaming Oil) TL-464 Page 19 of 46

UL 1659 UL 197 UL 1977 UL 2021 UL 207 UL 250 UL 325 UL 399 UL 429 UL 486C Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords Commercial Electric Cooking Appliances Component Connectors for Use in Data, Signal, Control and Power Applications (except Section 20) Fixed and Location-Dedicated Electric Room Heaters Refrigerant-Containing Components and Accessories, Nonelectrical Household Refrigerators and Freezers Door, Drapery, Gate, Louver, and Window Operators and Systems Drinking Water Coolers Electrically Operated Valves Splicing Wire Connectors UL 498 Attachment Plugs and Receptacles (except Section 55, 56, 57, 78, 92, 116, 123, 137H, 137I) UL 499 UL 50 UL 507 Electric Heating Appliances Enclosures for Electrical Equipment, Non-Environmental Considerations Electric Fans (except Par 67.2 and Par 92.1A) UL 5085-1 Low Voltage Transformers - Part 1: General Requirements UL 5085-2 Low Voltage Transformers Part 2: General Purpose Transformers UL 5085-3 Low Voltage Transformers Part 3: Class 2 and Class 3 Transformers [Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power:9kVA (300Vac/dc, 30A)] UL 50E Enclosures for Electrical Equipment, Environmental Considerations UL 561 Floor-Finishing Machines UL 60745-1 Hand-Held Motor-Operated Electric Tools Safety Part 1: General Requirements TL-464 Page 20 of 46

UL 60745-2-1 Hand-Held Motor-Operated Electric Tools Safety Part 2-1: Particular Requirements for Drills and Impact Drills UL 60745-2-11 Hand-Held Motor-Operated Electric Tools Safety Part 2-11: Particular Requirements for Reciprocating Saws UL 60745-2-12 Hand-Held Motor-Operated Electric Tools Safety Part 2-12: Particular Requirements For Concrete Vibrators UL 60745-2-13 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-13: Particular Requirements for Chain Saws UL 60745-2-14 Hand-Held Motor-Operated Electric Tools Safety Part 2-14: Particular Requirements for Planers UL 60745-2-15 Hand-Held Motor-Operated Electric Tools Safety Part 2-15: Particular Requirements for Hedge Trimmers UL 60745-2-16 Hand-Held Motor-Operated Electric Tools Safety Part 2-16: Particular Requirements for Tackers UL 60745-2-17 Hand-Held Motor-Operated Electric Tools Safety Part 2-17: Particular Requirements for Routers and Trimmers UL 60745-2-18 Hand-Held Motor-Operated Electric Tools Safety Part 2-18: Particular Requirements For Strapping Tools UL 60745-2-19 Hand-Held Motor-Operated Electric Tools Safety Part 2-19: Particular Requirements For Jointers UL 60745-2-2 UL 60745-2-20 UL 60745-2-21 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Cleaners UL 60745-2-22 Hand-Held Motor-Operated Electric Tools Safety Part 2-22: Particular Requirements For Cut-Off Machines UL 60745-2-23 Hand-Held Motor-Operated Electric Tools Safety Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools TL-464 Page 21 of 46

UL 60745-2-3 Hand-Held Motor-Operated Electric Tools Safety Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders UL 60745-2-4 Hand-Held Motor-Operated Electric Tools Safety Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type UL 60745-2-5 Hand-Held Motor-Operated Electric Tools Safety Part 2-5: Particular Requirements for Circular Saws UL 60745-2-6 Hand-Held Motor-Operated Electric Tools Safety Part 2-6: Particular Requirements for Hammers UL 60745-2-7 Hand-held motor-operated electric tools. Part 2: Particular requirements for spray guns for nonflammable liquids UL 60745-2-8 Hand-Held Motor-Operated Electric Tools Safety Part 2-8: Particular Requirements for Shears and Nibblers UL 60745-2-9 Hand-Held Motor-Operated Electric Tools Safety Part 2-9: Particular Requirements for Tappers UL 73 UL 773A UL 778 UL 817 UL 82 Motor-Operated Appliances Nonindustrial Photoelectric Switches for Lighting Control Motor-Operated Water Pumps Cord Sets and Power-Supply Cords (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA (300Vac/dc,30A) Electric Gardening Appliances UL 858 Household Electric Ranges (except Par 66 and Par 67) UL 859 UL 873 Household Electric Personal Grooming Appliances Temperature Indicating and Regulating Equipment UL 875 Electric Dry Bath Heaters (except Par 42.1.3) UL 982 UL 987 UL1564 Motor-Operated Household Food Preparing Machines Stationary and Fixed Electric Tools Industrial Battery Chargers UL60730-1 Automatic Electrical Controls Part 1: General Requirements TL-464 Page 22 of 46

UL60730-2-9 Automatic Electrical Controls Part 2-9: Particular Requirements for Temperature Sensing Controls Household and Commercial Appliances ANSI/UL 1995 ANSI/UL 471 ANSI/UL 474 ANSI/UL 484 ANSI/UL 60335-1 Heating and Cooling Equipment Commercial Refrigerators and Freezers Dehumidifiers Room Air Conditioners Household and Similar Electrical Appliances ANSI/UL 60335-2-24 Household and Similar Electrical Appliances Safety Part 2-24: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers ANSI/UL 60335-2-40 Household And Similar Electrical Appliances Safety Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers ANSI/UL 964 CSA C22.2 No. 104 CSA C22.2 No. 117 CSA C22.2 No. 150 CSA C22.2 No. 167 CSA C22.2 No. 168 CSA C22.2 No. 187 CSA C22.2 No. 195 CSA C22.2 No. 236 Electrically Heated Bedding Humidifiers Room air conditioners Microwave Ovens Household dishwashers Commercial dishwashers Electrostatic air cleaners(except Ozone test) Motor-operated food processing appliances (household and commercial) Heating and cooling equipment CSA C22.2 No. 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements CSA C22.2 No. 60335-2-15 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids CSA C22.2 No. 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers TL-464 Page 23 of 46

CSA C22.2 No. 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters CSA C22.2 No. 60335-2-40 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers CSA C22.2 No. 60335-2-6 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances CSA C22.2 No. 60335-2-9 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances CSA C22.2 No. 92 Dehumidifiers IEC/EN 50564 Electrical and electronic household and office equipment - Measurement of low power consumption IEC/EN 60335-1 Household and similar electrical appliances Safety Part 1: General requirements IEC/EN 60335-2-102 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC/EN 60335-2-13 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC/EN 60335-2-14 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines IEC/EN 60335-2-15 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids IEC/EN 60335-2-23 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care IEC/EN 60335-2-24 Household and similar electrical appliances - Safety -- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC/EN 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters TL-464 Page 24 of 46

IEC/EN 60335-2-40 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC/EN 60335-2-6 Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC/EN 60335-2-65 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances IEC/EN 60335-2-78 Household and similar electrical appliances - Safety -- Part 2-78: Particular requirements for outdoor barbecues IEC/EN 60335-2-80 Household and similar electrical appliances - Safety -- Part 2-80: Particular requirements for fans IEC/EN 60335-2-89 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor IEC/EN 60335-2-9 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances IEC/EN 60335-2-98 Household and similar electrical appliances - Safety -- Part 2-98: Particular requirements for humidifiers NSF/ANSI 4 NSF/ANSI 7 NSF/ANSI 8 UL 1083 UL 1647 UL 563 UL 621 UL 749 UL 763 UL 867 UL 921 Commercial Cooking, Rethermalization, and Powered Hot Food Holding and Transportation Equipment Commercial Refrigerators and Freezers Commercial Powered Food Preparation Equipment Household Electric Skillets and Frying-Type Appliances Motor-Operated Massage and Exercise Machines Ice Makers Ice Cream Makers Household Dishwashers Motor-Operated Commercial Food Preparing Machines Electrostatic Air Cleaners (except Ozone test) Commercial Dishwashers TL-464 Page 25 of 46

UL 923 UL 998 Microwave Cooking Appliances Humidifiers Lighting Products CSA C22.2 No. 12 CSA C22.2 No. 141 CSA C22.2 NO. 166 CSA C22.2 No. 1993 CSA C22.2 No. 207 CSA C22.2 No. 250.0 CSA C22.2 No. 250.1 CSA C22.2 No. 250.13 CSA C22.2 No. 250.4 CSA C22.2 No. 250.570 CSA C22.2 No. 250.7 CSA C22.2 No. 256 CSA C22.2 No. 37 CSA C22.2 No. 43 CSA C22.2 No. 74 CSA C22.2 No. 84 CSA C22.2 No. 89 CSA C22.2 No. 9.0 CSA TIL No. B-68 Portable Luminaires Emergency Lighting Equipment Stage and Studio Luminaires Self-Ballasted Lamps and Lamp Adapters Portable and stationary electric signs and displays Luminaires (except Clauses 16.5.5, 16.8, 16.11, and 16.12) Retrofit Kits For Luminaire Conversion Light Emitting Diode (LED) Equipment For Lighting Applications Portable Luminaires Track Lighting Extra-Low-Voltage Landscape Lighting Systems Direct Plug-in Nightlights Decorative Lighting Products Lampholsers Equipment for Use with Electric Discharge Lamps Incandescent Lamps Swimming Pool Luminaires, Submersible Luminaires and Accessories General Requirements for Luminaires (except Clauses 13.32, 13.33, and 13.37) Interim Certification Requirements for Ballasts for Use with Fluorescent Lamps CSA TIL No. B-70 Interim Certification Requirements for decorative lighting strings with flashers or controllers TL-464 Page 26 of 46

CSA TIL No. B-79 Requirements for Retrofitted Luminaires and LED Retrofit Kits for Installation into Previously Installed Luminaires CSA TIL No. B-79A CSA TIL No. B-81 Interim Certification Requirements for LED Retrofit Kits and Field Retrofitted Luminaires Interim Certification Requirements for Self Ballasted Tubular LED (TLED) Type A Lamps Subject 1029A Outline of Investigation For Ignitors And Related Auxiliaries For HID Lamp Ballasts UL 1018 Electric Aquarium Equipment (except Section 53) UL 1029 UL 1088 UL 153 UL 1573 UL 1574 UL 1598 UL 1598B High-Intensity Discharge Lamp Ballasts Temporary Lighting Strings Portable Electric Luminaires Stage and Studio Luminaires and Connector Strips Track Lighting Systems Luminaires (except Section 16.5.5, 16.8, 16.11, and 16.12) Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires UL 1598C Light - Emitting Diode (LED) Retrofit Luminaire Conversion Kits UL 1786 UL 1838 UL 1993 UL 2108 UL 234 UL 2388 UL 48 UL 496 UL 588 Direct Plug-In Nightlights Low Voltage Landscape Lighting Systems Self-Ballasted Lamps and Lamp Adapters Low Voltage Lighting Systems Low Voltage Lighting Fixtures For Use in Recreational Vehicles Flexible Lighting Products Electric Signs Lampholsers Seasonal and Holiday Decorative Products, Supplement SD TL-464 Page 27 of 46

UL 65 UL 676 UL 8750 UL 8754 UL 879 UL 879A Wired Cabinets Underwater Luminaires and Submersible Junction Boxes Light Emitting Diode (LED) Equipment for Use in Lighting Products Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays Electric Sign Components LED Sign and Sign Retrofit Kits UL 8800 Outline of Investigation For Horticultural Lighting Equipment UL 924 UL 935 UL 962 ULC-S1088 Emergency Lighting and Power Equipment Fluorescent - Lamp Ballasts Household and Commercial Furnishings Standard For Temporary Lighting Strings Electronic Products Information Technology Equipment CSA C22.2 No. 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements (For 2nd edition, except Clauses 2.10.4.2, 2.10.8.4, 3.2.5.1, 4.2.8, 4.3.12, 4.3.13) EN 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements (For 2nd edition, except Clauses 2.10.4.2, 2.10.8.4, 3.2.5.1, 4.2.8, 4.3.12, 4.3.13) IEC 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements (For 2nd edition, except Clauses 2.10.4.2, 2.10.8.4, 3.2.5.1, 4.2.8, 4.3.12, 4.3.13) UL 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements (For 2nd edition, except Clauses 2.10.4.2, 2.10.8.4, 3.2.5.1, 4.2.8, 4.3.12, 4.3.13) Audio, Video and Similar Electronic Apparatus CSA C22.2 No. 60065 EN 60065 Audio, Video and Similar Electronic Apparatus - Safety Requirements(For 7th edition, except Clauses 6, 7.2, 8.18, 8.22, 14.2, 14.4, 14.5,14.12, 16.1, 18; For 8th edition, except Clauses 6, 7.2, 8.17, 8.21, 14.3, 14.5, 14.6,14.13, 16.1, 18) Audio, Video and Similar Electronic Apparatus - Safety Requirements(For 7th edition, except Clauses 6, 7.2, TL-464 Page 28 of 46

8.18, 8.22, 14.2, 14.4, 14.5,14.12, 16.1, 18; For 8th edition, except Clauses 6, 7.2, 8.17, 8.21, 14.3, 14.5, 14.6,14.13, 16.1, 18) IEC 60065 UL 60065 Audio, Video and Similar Electronic Apparatus - Safety Requirements(For 7th edition, except Clauses 6, 7.2, 8.18, 8.22, 14.2, 14.4, 14.5,14.12, 16.1, 18; For 8th edition, except Clauses 6, 7.2, 8.17, 8.21, 14.3, 14.5, 14.6,14.13, 16.1, 18) Audio, Video and Similar Electronic Apparatus - Safety Requirements(For 7th edition, except Clauses 6, 7.2, 8.18, 8.22, 14.2, 14.4, 14.5,14.12, 16.1, 18; For 8th edition, except Clauses 6, 7.2, 8.17, 8.21, 14.3, 14.5, 14.6,14.13, 16.1, 18) Electrical Equipment for Measurement, Control and Laboratory Use CSA B-81 Interim Certification Requirements for Self Ballasted Tubular LED (TLED) Type A Lamps CSA C22.2 No. 61010-031 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (Binational standard with UL 61010-031)(Except Clause 11.3) CSA C22.2 No. 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements(For 2nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3rd edition, except Clauses 6.7.1.3, 10.5.3 2, 11.6, 12, 13.2.3, 14.8) CSA C22.2 No. 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits (Tri-national standard, with ANSI/ISA-61010-2- 030 (82.02.03) and UL 61010-2-030) (Except Clause 14.101) CSA C22.2 No. 61010-2-032 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement (Adopted IEC 61010-2-032:2012, edition 3.0:2012, with Canadian deviations) (For 3rd edition, except Clause14.101) TL-464 Page 29 of 46

CSA C22.2 No. 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage (Adopted IEC 61010-2-33:2012, edition 1.0:2012, with Canadian deviations)(except Clause 14.101) CSA C22.2 No. 61058-1 Switches for Appliances - Part 1: General Requirements EN 61010-031 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (Except Clause 11.3) EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements(For 2nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3rd edition, except Clauses 6.7.1.3, 10.5.3 2, 11.6, 12, 13.2.3, 14.8) EN 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits (Tri-national standard, with ANSI/ISA-61010-2- 030 (82.02.03) and UL 61010-2-030) (Except Clause 14.101) EN 61010-2-032 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement (Adopted IEC 61010-2-032:2012, edition 3.0:2012, with Canadian deviations)(for 3rd edition, except Clause14.101) EN 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage (Adopted IEC 61010-2-33:2012, edition 1.0:2012, with Canadian deviations) (Except Clause 14.101) UL 61010-031 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for TL-464 Page 30 of 46

electrical measurement and test (Second edition) (Except Clause 11.3) UL 61010-1 Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements - Second Edition (For 2nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3rd edition, except Clauses 6.7.1.3, 10.5.3 2, 11.6, 12, 13.2.3, 14.8) UL 61010-2-030 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits (First edition) (Except Clause 14.101) UL 61010-2-032 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement (Third Edition) (For 3rd edition, except Clause14.101) UL 61010-2-033 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage (First Edition) (Except Clause 14.101) UL 61058-1 Switches for Appliances - Part 1: General Requirements Audio/video, information and communication technology equipment CSA C22.2 No. 62368-1 Audio/video Information and communication technology equipment Part 1: Safety Requirements(except clause 5.4.1.10.2, 5.4.3.3, 5.4.4.6.5, 10, G.7, G.13.6.2, G.15.3.3, G.15.3.4, J, M.8, S.3.2, U, DVB, DVC, DVI, DVJ) EN 62368-1 Audio/Video Information and Communication Technology Equipment - Part 1: Safety Requirements(except clause 5.4.1.10.2, 5.4.3.3, 5.4.4.6.5, 10, G.7, G.13.6.2, G.15.3.3, G.15.3.4, J, M.8, S.3.2, U, DVB, DVC, DVI, DVJ) UL 62368-1 Audio/Video Information and Communication Technology Equipment - Part 1: Safety Requirements(except clause 5.4.1.10.2, 5.4.3.3, 5.4.4.6.5, 10, G.7, G.13.6.2, G.15.3.3, G.15.3.4, J, M.8, S.3.2, U, DVB, DVC, DVI, DVJ) TL-464 Page 31 of 46