HEP Tech Co., Ltd. Company Profile
HEP Group Structure 1. HEP Tech Co., Ltd. Head office / Global sales team / R&D center 2. HEP GmbH Europe sales office / Warehouse / Europe R&D center & DEKRA certified lab 3. WeiSen Electronic Co., Ltd. ISO 9001 & OHSAS18001 & ISO14001 certified factory & China sales service center
HEP Group HEP Tech Co., Ltd. is incorporated in 2002 in Taiwan. It functions as the Group s Headquarters. Located in Taichung, the HQ covers a area of 2718 sq m, with 6 stories, including 2-story basements, usable floor space of 8,235 sq m. It houses the management, global sales team, and HEP s 2nd R&D Center outside of Germany.
HEP Organization Chart - Taiwan
HEP GmbH, Germany HEP GmbH was Founded in 2001, located in Schalksmühle, Germany with the sales & R&D center and warehouse. HEP GmbH merger with HEP Engineering GmbH (HEP Group s european development center) in 2015. DEKRA certified lab
Production Facilities Guangdong Taiwan Factory ZhuHai, China
Factory - Zhuhai WeiSen Electronic Co., Ltd. Total occupied ground : 15,000 sq meter The area of factory : 3,008 sq meter Assembly line : 4 lines Number of employees : 320 Sales object : Export - oriented ISO 9001 KEMA Certified OHSAS18001 ISO14001 Certified OHSAS18001 occupational heath & safety management system ISO14001 environmental management system
Facility - Production Line
Facility - SMD Technology Using SMD technology for PCB chips mounting. 0.27sec/pc mounting speed ± 5 degrees of angle deviation of component mounting on PCB
Facility - Manual Mounting
Inspection Equipment In-Circuit Tester Inspection items : Open circuit Short circuit Defective component Wrong component Incorrect mounting
Inspection Equipment - Function Test 100% function test Input power test Input voltage test Power factor test Operating frequency test Lumen Factor test Ambient Temperature test Protection Test
Inspection Equipment - Burn-in Room 100% burn-in test from 4 to 8 hours
Inspection Equipment - RoHS Test Lab X-ray Spectrometry Material analysis for 6 hazardous substances: Pb (Lead) Cr+6 (Hexavalent chromium) Cd (Cadmium) Hg (Mercury) PBB (Polybrominated biphenyls) PBDE (Polybrominated diphenyl ether)
Inspection Equipment - EMI Radiated / Conducted Emissions Test Lab Pre-test 743 semi anechoic chamber L7m x W4m x H3m Shielding effectiveness: Test frequency in accordance to IEEE-299 / EN50147-1, 30MHz to 10 GHz ( 100dB). Radiated / Conducted Emissions test: Test according to the standard of EN 55015 (CISPR 15)
Group Total Production Capacity - Monthly Volume Product Factory 2016 2017 2018 LED Drivers WeiSen 2,860,000 3,150,000 3,000,000 Electronic Transformer WeiSen 330,000 660,000 200,000 Electronic Ballast WeiSen 750,000 300,000 400,000
Global Sales Distribution - Product Sold by Region Updated : 2018
Global Sales Distribution Updated : 2018
HEP Range of Products - Dimming Technology Dimming LED drivers - 1~10V, Phase-control, PWM, Dali Electronic 0/1-10V / Phase-control dimmable ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Digital Addressable Dimming Ballast- DALI - for T5, T8, Linear & Compact Fluorescent Lamps
HEP Range of Products - Standard Series LED drivers constant current & constant voltage Electronic ballasts for T5, T8 Linear & Compact Fluorescent Emergency inverter for T5, T8 Linear & Compact Fluorescent & LED Electronic transformers for Halogen lamp
Dimming LED Drivers - 1~10V, Phase-control, PWM, DALI, Full dimming level from 3%~100% for single color or mucho color via 1-10V, phase-control, PWM, Dali control O/P channel drive 120mA up to 2000mA constant current adjustable via RSET / Dip Switch
Electronic 0/1-10V Dimmable Ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Low inventory costs because one ballast type operates several wattages and lamp type. Automatic identification of lamp type. Flicker-free dimming from 1%-100% of light flux.
Digital Addressable Dimming Ballasts - for T5, T8 Linear Fluorescent Lamps Ultra low energy consumption < 0.25W @ 120V of input voltage range in stand-by, lamp failure, no-load status. In compliance of Europe Energy Efficiency Index of A1 BAT Full-range continuous dimming from 100% light output down to 1% Dimming type- DALI, KNX control
LED Drivers - Constant Current, Constant Voltage Comprehensive range from 3-120W DC output with constant current of 120mA up to 1400mA for high power LEDs. Low ripple current design makes direct lighting perform superior quality Comprehensive application from 3-250 W DC output with constant voltage of 12V or 24V for regular LEDs.
Electronic Ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Automatic identification of lamp type. Patented pre-heating circuit & warm start within 1 sec. Non stroboscopic effects. High-frequency lamp operation (over 45kHz).
Emergency Inverter All-in one design suited for T5, T8 and compact fluorescent lamps ranged from 5-80W, also for LED Operate in 1x, 2x, 3x, 4x lamp of luminaire with conventional or electronic ballast. Auto self-test functions and testing push button. Work with NiCd or NiMh battery Battery automatically discharged-n-charged at intervals of every 3 months
International Certification Europe Australia SAA America China Japan HEP Products are ENEC Certified
2010 Hong Kong International Light Fair
2011 Hong Kong International Light Fair
2012 Frankfurt Light + Building Show
2013 Hong Kong International Light Fair
2014 Frankfurt Light + Building Show
2014 Hong Kong International Light Fair
2015 Hong Kong International Light Fair
2016 Frankfurt Light + Building Show
2018 Guangzhou International Lighting Exhibition
Thank you