B9512G Control Panels

Intrsion Alarm Systems B9512G Control Panels B9512G Control Panels www.boschsecrity.com Flly integrated intrsion, fire, and access control allows sers to interface with one system instead of three Spports p to 599 points sing a combination of hardwired or wireless points for installation flexibility, and p to 32 areas and 32 doors for p to 2,000 sers On-board Ethernet port for Conettix IP alarm commnication and remote programming, compatible with modern IP networks inclding IPv6/ IPv4, AtoIP, and Universal Plg and Play Installer-friendly featres inclding on-board USB for easy on-site RPS programming, pls plg-in PSTN and Celllar commnication modles for simple installation and ftre proof pgrades Email and text notifications as well as remote control of yor system sing Android or ios mobile devices The B9512G Control Panel and the B8512G Control Panel are the new premier commercial control panels from Bosch. B9512G control panels integrate intrsion, fire, and access control providing one simple ser interface for all systems. With the ability to adapt to large and small applications, the B9512G provides p to 599 individally identified points that can be split into 32 areas. The control panel incldes a bilt-in Ethernet port for IP network commnications, and is compatible with modles that send events to selected pblic switched telephone networks (PSTN), IP networks, or celllar network destinations throgh for programmable rote grops. For sers, programmable keypad shortcts, sitation sensitive on-screen help, and a bilingal ser interface make system operation simple and easy. With the B9512G Control Panel, yo can: Monitor alarm points for intrder or fire alarms while operating keypads and other otpts (p to 599 programmable otpts inclding three on-board). Program all system fnctions local or remote sing Remote Programming Software (RPS) or by sing basic programming throgh the keypad. Add p to 32 doors of access control sing the optional B901 Access Control Modle. (Optionally se the D9210C Access Control Interface Modle for p to eight of the 32 doors.) The B9512G is a direct replacement for previos G Series control panel models D9412GV4, D9412GV3, D9412GV2, and D9412G. Fnctions Programmable otpts For alarm-otpt patterns Programmable bell test

2 B9512G Control Panels System response High-performance micro-controller provides indstry leading system response 63 point indexes Selectable point response time Selectable EOL resistor configration, single or dal Cross point capability Fire alarm verification Dangeros gas indicator incldes carbon monoxide (NFPA 720) Watch mode Schedled events (SKEDs) perform several fnctions, sch as trn on (arm) the system, trn off (disarm) the system, bypass and nbypass points, and control otpts User interface Spervision of p to 32 keypads Cstom keypad text is flly programmable throgh RPS Fll fnction men inclding cstomizable shortcts Athority by area and 32 character name for each ser 14 cstom athority levels control ser s athority to change, add, or delete passcodes to disarm or bypass areas, and to start system tests Programmable primary and secondary langage by ser and keypad; select from English, Spanish, French, and Portgese Area configration Area programming offers a wide selection of different system configrations. Make area arming conditional on other areas (master or associate), if desired. Yo can configre any area for perimeter and interior arming, not reqiring a separate area for this fnction. Link mltiple areas to a shared area which is atomatically controlled (hallway or lobby). For higher secrity applications, the Area Re-Arm featre garantees that areas are always rearmed, and are disarmed for no longer than a specific, configrable, amont of time (for example, service time). Cstom fnctions For added convenience, the installer can program cstom fnctions that allow cstomers to complete complex tasks with one simple action. For example, a cstom fnction can bypass a grop of points and arm the system, allowing the ser to perform these fnctions with one easy command. Users can activate cstom fnctions with a keypad, keyfob, token, or card, or the control panel can activate a fnction in reaction to a falted point, or atomatically throgh a schedled event (SKED). Passcode secrity Two-man rle. Reqires two people with two niqe passcodes to be present at the time of opening. Early ambsh. Allows sers to verify that the facility is safe by reqiring two passcodes. The control panel sends a dress event if the ser does not enter the passcode a second time after inspecting the premises. Dal athentication. Reqires two forms of identification before processing certain system commands, inclding trning off the system and opening doors. A standard system ser mst have a passcode, a credential (token or card), and appropriate command athority permissions assigned in the door and keypad s assigned area. Easy exit control The control panel changes from one On (armed) state to another withot trning off (disarming) the system. For example, if yo change the state from Part On (Perimeter Arm) to All On (Master Arm), the control panel complies and reports the change. Easy Exit Control redces the nmber of keystrokes, simplifying system operation. Programmable passcode-controlled men list Passcode-controlled shortcts provide sers only with the options and information pertinent to them, simplifying system operation. Flexible control The system provides the flexibility to choose added convenience or high secrity. For example, yo can restrict to a keypad's immediate local area trning on (arming) and trning off (disarming) the system with a passcode, even if the ser has access to other areas. This is particlarly sefl for high secrity areas, where a ser may have access to the area, bt wold prefer to only trn off (disarm) the area individally rather than with the rest of the system. Monitor Delay/Delayed Response Create a special point index that delays the reaction of a point for a specified time (p to 1 hor in mintes and seconds). This delay provides time for the specified condition to reset before activating any annnciation. The system can annnciate locally and send a report, if desired. When the system is armed, the point can respond like a normal point providing dal fnctionality. Use this featre to ensre that perimeter doors have not been propped open, or to monitor critical areas sch as compter rooms and safes, for example. System sers The system spports p to 2,000 sers. Each ser can have a personalized passcode, a wireless keyfob, and a credential to control the system. Yo can assign passcodes to one of 14 cstomized athority levels in each area that can be restricted to operate only dring certain times. Yo can program a primary and secondary langage for each ser and by keypad (select from English, Spanish, French, and Portgese). The keypad changes to the ser s programmed langage when the ser enters his passcode or holds the Help key.

3 B9512G Control Panels Commnication formats The control panel prioritizes and sends reports to for rote grops. Network and phone commnications can se either the Modem4 or the Contact ID commnications formats. Each grop has a programmable primary and backp destination. The control panel provides flexible commnications for most central stations with reporting capabilities sch as: Individal point nmbers Opening or closing reports by ser and area nmber Remote programming attempts Diagnostic reports Notice For premises eqipment sed in the commnication path, sch as roters, se only listed eqipment. IP commnication The control panel can se on-board Ethernet (IP) connection (the on-board Ethernet port is exclded on E versions) to commnicate with a Conettix D6600 or a Conettix D6100IPv6 Commnications Receiver/ Gateway. The control panel can optionally se a B426 Conettix Ethernet Commnication Modle or a Conettix Plg-in Celllar Commnicator (B440/B441/B442/B443). Using Conettix IP commnication offers a secre path that incldes anti-replay/anti-sbstittion featres and provides enhanced secrity with AES 256-bit encryption (sing Cipher Block Chaining (CBC)). The control panel spports Domain Name System (DNS) for both remote programming and central station commnication. DNS provides ease of se, eliminating the need to se static IP addresses as yor reporting destination, and accommodates a simple soltion for central station disaster recovery. IP Setp is easy, eliminating the need to se complicated internet programming tools sch as ARP and Telnet. The control panel spports both IPv6 and IPv4 networks. Commnication paths The control panel accommodates p to for separate phone and for separate network paths to the central station receiver. When resetting alarms or trning a system on and off, the ser is identified by name and nmber. Personal notification The control panel can send text messages and emails for personal notification over Ethernet or sing a celllar commnicator. Yo can configre p to 32 destinations sing a combination of celllar phone nmbers and email addresses. The control panel sends notifications in the ser s programmed primary langage. Firmware pdates The system allows remote firmware pdates throgh Remote Programming Software (RPS) sing the RPS Firmware Update Wizard. The Firmware Update Wizard ses the on-board USB connection or the on-board Ethernet (IP) connection (the on-board Ethernet port is exclded on E versions) to transmit firmware pdates. The control panel can optionally receive firmware pdates from RPS sing a B426 Conettix Ethernet Commnication Modle or a Conettix Plg-in Celllar Commnicator (B440/B441/B442/B443). Notice! Celllar firmware pdates reqire more time than Ethernet pdates and carrier data rates apply. Control panel pdates. Remotely pdate the control panel firmware for easy featre enhancements withot replacing ROM chips. Modle pdate spport. Remotely pdate the firmware on connected SDI2 modles for easy featre enhancements withot visiting each individal modle. A wide variety of inpt options Each point: Accommodates normally open (NO) and normally closed (NC) devices with end of line (EOL) resistor spervision. Accepts programming for fire, gas, fire spervisory, or intrsion applications. Spports hardwired and wireless devices. Spports IP cameras by Bosch as point sorces. IP camera spport The control panel can se its on-board Ethernet to connect directly to Bosch IP cameras. The control panel commnicates with Bosch IP cameras, allowing the camera s video motion detection to activate points on the control panel and control panel events to trigger camera actions, inclding sending video snapshots via email. Secrity and fire detection The control panel provides eight on-board points, and p to 591 additional off-board points (depending on model and expansion interfaces). Yo can program individal points to monitor some types of brglar alarms, fire alarms, and spervision devices. Event log The event log stores p to 10192 local and reported events. The event log incldes time, date, event, area, point, and ser. View the event log from a keypad or se RPS to remotely retrieve event information. When the event log reaches a programmed threshold of stored events, it can send an optional report to a receiver. Schedled events (SKEDs) The internal clock and calendar start individally schedled events (SKEDs). SKEDs perform fnctions sch as trn on or off, relay control, or point bypassing. The control panel offers:

4 B9512G Control Panels 80 schedled events with p to 31 different fnctions 32 opening windows and 32 closing windows 32 ser grop windows Day-of-week, date-of-month, or holiday only schedles 8 holiday schedles of 366 days (leap year) Programming Installers can perform limited programming on-site with a keypad (critical parameters; sch as accont IDs, central station and RPS IP addresses and phone nmbers, reporting formats, and more). They can also do fll programming on-site or remotely (attended or nattended) with RPS. A programmable system passcode prevents nathorized remote programming. Diagnostics Keypads and RPS offer diagnostic help for monitoring and trobleshooting. The diagnostics featres allow yo to view the stats of the wired and wireless devices. The featres provide the stats of the control panel and its connected devices, sch as firmware version, power, and missing conditions. View the stats of each area. Bosch Video Management System integration With Bosch Video Management System (Bosch VMS) and an intrsion system, the VMS operator has a single ser interface to monitor and control the intrsion system combined with video srveillance. With Bosch VMS and a control panel, the operator can, for example: View videos triggered by intrsion events, inclding all relevant information sch as areas, point, and ser show in the display with the event View areas, points, otpts, and doors with their statses on the Bosch VMS map, providing the exact location in the system. Trn on (arm) and trn off (disarm) areas. Bypass and nbypass points. Lock and nlock doors (Bosch VMS 6.0 and higher). Reqirements to integrate Bosch VMS with a control panel: A licensed Bosch VMS system sing Professional Editions v5.5 or higher or Bosch VMS Enterprise Edition v5.5 or higher. Expansion license to integrate the intrsion control panel. One license needed per control panel. Order nmber MBX-XINT-xx for the expansion license added to a Bosch VMS base license. Refer to the Bosch Video Management Software prodct page on the Bosch website, www.boschsecrity.com. Access to Remote Programming Software (RPS). Certifications and approvals Region Certification Erope CE EMC, LVD, RoHS B9512G, B9512G-E, B8512G, B8512G-E Astralia USA Canada RCM Parts inclded CSFM FCC FDNY- CoA C C C C C C C 294 - Standard for Access Control Units and Systems 365 - Police Station Connected Brglar Alarm Units 609 - Standard for Local Brglar Alarm Units and Systems 636 - Holdp Alarm Units and Systems 864 - Standard for Control Units and Accessories for Fire Alarm Systems 985 - Hosehold Fire Warning System Units 1023 - Hosehold Brglar Alarm System Units 1076 - Proprietary Brglar Alarm Units and Systems 1610 - Central Station Brglar Alarm Units 1635 - Standard for Digital Alarm Commnicator System Units California State Fire Marshall (see or website) Part 15 Class B Fire Department of New York City CAN/C S303 - Local Brglar Alarm Units and Systems CAN/C S304 - Standard for Signal Receiving Center and Premise Brglar Alarm CAN/C S545 - Residential Fire Warning System Control Units CAN/C S559 - Fire Signal Receiving Centres and Systems C-ORD C1023 - Hosehold Brglar Alarm System Units C-ORD C1076 - Proprietary Brglar Alarm Units and Systems Region Certification The B9512G incldes the following: USA ANSI/ SIA CP-01-2010-Control Panel Standard - Featres for False Alarm Redction Qant. Component 1 B9512G

5 B9512G Control Panels 1 Literatre pack Installation Gide C Installation Gide Owner s Manal Release Notes SIA Qick Reference Gide 1 Literatre CD containing prodct literatre Each B9512G-E control panel kit incldes the following: Qant. Component 1 B9512G-E (withot on-board Ethernet port) 1 Plg-in commnicator (telephone or celllar, depending on the kit) Wiring Terminal wire size 12 AWG to 22 AWG (2.0 mm to 0.65 mm) SDI2 wiring Commnications Ethernet Nmber of Areas 32 Cstom fnctions 32 Maximm distance Wire size (nshielded wire only): 7,500 ft (2,286 m) 22 AWG (0.65 mm) One on-board Ethernet connector* 1 Plg-in Transformer (16.5 VAC 40 VA) Keypads 32 keypads, inclding 16 SDI keypads 1 Control panel enclosre 1 Literatre pack Installation Gide C Installation Gide Owner s Manal Release Notes SIA Qick Reference Gide 1 Literatre CD containing prodct literatre Technical specifications Properties Dimensions Weight Environmental considerations Relative hmidity Temperatre (operating) Power reqirements Crrent (maximm) Otpt (alarm) Otpt (axiliary, continos power, and switched axiliary combined) Voltage (operating) Voltage (AC) 10.625 in x 7.75in x 1.875 in (26.99 x 19.69 x 4.76 cm) 1.95 lbs (0.88kg) 5% to 93% at +32 C (+90 F) 0 C to +49 C (+32 F to +120 F) Standby: 180 ma Alarm: 260 ma 2 A at 12 VDC 1.4 A at 12 VDC nominal 12 VDC nominal 16.5 VAC 40 VA plg in transformer (D1640/D1640-CA) Events Up to 10,192 Passcode sers Points Programmable otpts RF points 591 SKEDs 80 2000, pls 1 Installer passcode 599 (8 on-board, p to 591 off-board) 599 (3 on-board, p to 596 off-board) *The E control panels do not inclde an on-board Ethernet connector. Ordering information B9512G Control Panel The B9512G is available individally or in kits. For kits, refer to Qick Selection Gide (B9512G/ B8512G Kits) on the Docments tab of the control panel s Prodct Page at s.boschsecrity.com. Order nmber B9512G B9512G-E Control Panel The B9512G-E is available only in kits. For kits, refer to Qick Selection Gide (B9512G/ B8512G Kits) on the Docments tab of the control panel s Prodct Page at s.boschsecrity.com. Order nmber B9512G-E Accessories B520 Axiliary Power Spply Modle Provides axiliary power to 12VDC devices or to SDI2 modles. Order nmber B520 B208 Octo-inpt Modle Provides 8 programmable inpts. Order nmber B208 B308 Octo-otpt Modle Provides 8 programmable relays. Order nmber B308

6 B9512G Control Panels SDI2 Inovonics Interface and Receiver Kit Kit containing B820 and EN4200 for se on SDI2 bs panels. Order nmber ENKIT-SDI2 D122 Dal Battery Harness Harness with circit breaker. Connects two batteries to a compatible control panel. Order nmber D122 D122L Dal Battery Harness with Long Leads Color-coded harness with circit breaker and leads measring 89 cm (35 in.). Connects 12 V batteries to compatible control panels. Order nmber D122L D126 Standby Battery (12 V, 7 Ah) A rechargeable sealed lead acid power spply sed as a secondary power spply or in axiliary or ancillary fnctions. Order nmber D126 D1218 Battery (12 V, 18 Ah) A 12 V sealed lead acid battery for standby and axiliary power with two bolt fastened terminals. Incldes hardware for attaching battery leads or spade connectors Order nmber D1218 D1238 Battery (12 V, 38 Ah) A 12 V sealed lead-acid battery for standby and axiliary power with two bolt fastened terminals. Incldes hardware for attaching battery leads or spade connectors. Order nmber D1238 D137 Monting Bracket Used to mont accessory modles in D8103, D8108A, and D8109 enclosres. Order nmber D137 D138 Monting Bracket, Right Angle Used to mont accessory modles in D8103, D8108A, and D8109 enclosres. Order nmber D138 D1640 Transformer System transformer rated at 16.5 VAC, 40 VA. Order nmber D1640 D8004 Transformer Enclosre For applications sch as fire alarm that might reqire a transformer enclosre. Order nmber D8004 D9002 5 Monting Skirt Monts inside B8103, D8103, D8108A, and D8109 enclosres. Can accept p to six standard 7.62 cm x 12.7 cm (3 in. x 5 in.) cards. Order nmber D9002-5 D101 Lock and Key Set Short-body lock set with one key spplied. Uses the D102 (#1358) replacement key. Order nmber D101 D110 Tamper Switch Screw on tamper switch that fits all enclosres. Shipped in packages of two. Order nmber D110 ICP EZTS Dal Tamper Switch Combination tamper switch with a wire loop for additional tamper otpts. Order nmber ICP-EZTS B8103 Enclosre White steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Order nmber B8103 D8103 Enclosre Grey steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Order nmber D8103 D8108A Attack Resistant Enclosre Grey steel enclosre measring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.). Listed. Incldes lock and key set. B520, B4512, and B5512 reqire the B12 monting plate. Order nmber D8108A D8109 Fire Enclosre Red steel enclosre measring 40.6 cm x 40.6 cm x 8.9 cm (16 in. x 16 in. x 3.5 in). Listed. Incldes a lock and key set. Order nmber D8109 BATB-40 Battery Box\Enclosre The BATB-40 Battery Box holds two dry or wet cell batteries. The box can be sed with fire alarm systems or intrsion systems. Order nmber BATB-40 BATB-80 Battery Box\Enclosre with Shelf The BATB-80 Battery Box holds p to for dry or wet cell batteries. The box can be sed with fire alarm systems or with intrsion systems. Order nmber BATB-80 Software Options RPS Kit (USB) Accont management and control panel programming software with USB secrity key (dongle). Order nmber D5500C-USB

7 B9512G Control Panels Represented by: Astralia Bosch Secrity Systems Pty Ltd Site 1, Level 2, 21 Solent Circit Balkham Hills, NSW, 2153 Phone: +1 300 026 724 Fax: +61 2 8850 2230 stsales@a.bosch.com www.boschsecrity.com.a Bosch Secrity Systems 2016 Data sbject to change withot notice Astralia, Jne 2016