SMF SOLUTIONS FOR PRODUCTION BIG PET BOTTLES AND JARS

SMF SOLUTIONS FOR PRODUCTION BIG PET BOTTLES AND JARS

BOTTLE DIMENSIONS 3 12 L VOLUME Hmax. 435mm HEIGHT DIAMETER NECKRING UNDER NECKRING Min. 44,5 mm Max. 45,5 mm Hmin. 17,5 mm volume and diameter adjustments might be avaiable on special request 200mm

BOTTLE DIMENSIONS VOLUME 5 20 L Hmax. 550mm HEIGHT DIAMETER NECKRING UNDER NECKRING Min. 48 mm Max. 55 mm Hmin. 20 mm volume and diameter adjustments might be avaiable on special request 340mm

Blowing pressure Jar volume Max. jar diameter Max. jar heigh Max. neck diameter Output* Working air quantity (10 bar) Working air quantity (30 bar) Number of cavities Power installed Power supply Steering voltage Mould material 30 BAR 0,5 3,5 L 135 mm 280 mm 100 mm up to 5OOO BPH (0,5L) up to 4 5OO BPH (1,5L) up to 3OOO BPH (3,5L) 3 4,5 m /min 3 3,8 m /min 4 83.O kw 4OO +/- 5% 3P, 5O-6OHz 24V/DC FORTAL JAR DIMENSIONS DIAMETER NECKRING VOLUME 0,5 3,5 L UNDER NECKRING Min. 75 mm Max. 100 mm Hmin. 20 mm Hmax. 280mm 135 mm

F A M I L Y STRATOS electric machines are used to manufacture bottles and other containers made out of PET plastic using preform reheating and blowing technology. Preforms are loaded into a hopper and transported into a blowing machine, where they are heated in an oven through several stages of plasticizing process by the use of infrared lamps IR. Heated preforms are transported to a blowing mould, when the mould is closed the bottles are blown in a two stage process: pre-blow (pressure 7BAR) and main blow (pressure 25-30BAR). Blown bottles are cooled and placed on a plate conveyor; there they are ready to be delivered to the next stage at the production line. Wide spectrum of bottle sizes 3 20 litres Stratos machines are designed for a wide spectrum of bottles sizes. Stratos 10 is a two cavity machine which can produce bottles from 3.0L to 10L. Stratos 20 is a one cavity machine suitable for containers 12.0L to 20L but it is equipped with format parts (for the neck rings) so it can be used for production of 3.0L to 20L containers. Flexibility, easy operation and mould change-over The shape and size of the bottle can be easily changed thanks to SMF easy mould change-over system. This system utilizes rollers and a mould trolley. Advanced PLC control with a user-friendly interface allows easy regulation of the system of stretching and heating preform. Stratos also has a CENTRAL LUBRICATION SYSTEM to minimize maintenance stopovers and ensure the highest standards. A central lubrication system controls the consumption of lubricants and makes sure all the crucial parts are properly lubricated. Cost-effective and efficient big bottle production STRATOS machines meet all the customers' requirements, the machines offer high quality production of PET bottles at the highest technological level. Closing unit movements, stretching rod as well as closing unit manipulator system are steered by servo drives which ensure fluent regulation, work and performance of mechanical operations. Information about production capacity, speed of the machine, detected errors, list of alarms and emergency stops is also easily accessible. Thanks to the internet connection The system can also make the diagnosis of active sensors in order to some minor software issues. Moreover, all Stratos machines have an installed UPS system which protects PLC and motion controllers of the machine. In situation of an emergency stop, UPS reduces the risk of damage. Solutions for comfort use and fully automatic production To take the full advantage of STRATOS machines SMF implemented a preform dumper which is designed to automate the production process. Thanks to this solution, preforms are placed into a preform hopper automatically. Handling is limited to changing pallets with octabin filled preforms. As an option the machine can also be equipped with a POWER WIZARD solution designed to ensure a stable temperature for preforms during the reheating process. This system allows to eliminate disruptions resulting from fluctuations of air temperature. The Pyrometric Temperature Controller PowerWizard precisely and automatically readjusts the amount of heat radiated towards preforms it is done by comparing the actual preform temperature and the set value (nominal). Closed loop temperature control not only guarantees stable quality but also protects the production process against the environmental disruptions. Advantages < A wide spectrum of bottles sizes from 3.0L to 20L and the ability to work with various types of neck rings. (available as an option), < User friendly design, < Equipped with quick and easy change-over of bottle size moulds with trolley for moulds, < PLC control system with user friendly touchscreen, < Preform dumper, < Central lubrication system < Units for bottle production process, such as: a closing unit, stretching rods, transmission of preforms between oven and moulds, are controlled and steered by servo drives, < POWER WIZARD Pyrometric Temperature Controller is utilized for a precise regulation of temperature to reduce energy costs and the wastage of preforms, < Remote Control System Router Internet module quick help and support for the customer. Stratos machines are equipped with an Air Recuperation System which ensures low air consumption. After each cycle high pressure air, instead of going to the atmosphere, is transferred to a special container (air recycling) where it is stored and then used again in other processes. Thanks to the recuperation the air demand is much lower. Another improvement is a Router-Internet module which allows easy and fast error diagnosis. It also makes the machine easily accessible by SMF software engineer so the customer may save time and cut the service costs.

JUMBO 5 20 J SEMI-AUTOMATIC BLOW MOULDING MACHINES www.smfgmbh.com info@smfgmbh.com