DNJ SERIES PUMPS END SUCTION CLOSE COUPLED

DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards developed by the Hydraulic Institute (HI) and the National Electrical Manufacturers Association (NEMA). APPLICATIONS: DNJ Series Pumps are designed for applications in medium duty service, in heating and air conditioning, booster and general circulating services. SPECIFICATIONS: Capacities - Up to 2300 GPM Pressure - Up to 75 PSI Temperature - From 32 F to 200 F Liquids - Water and Light Hydrocarbons Head - Up to 400 Feet Horsepower - Up to 00 HP Drives - NEMA JM Motors Materials - Cast Iron, Bronze, Stainless Steel FEATURES: DNJ Series Pumps are available in cast iron bronze tted and all iron Materials of Construction (MOC) Pump casing is tted with a bronze replaceable wear ring. Motor bearings are grease lubricated and are sized for a minimum of 20,000 hours L0 basic rating life or 00,000 hours median bearing life. The motor/impeller shaft is protected with a replaceable (bronze) sleeve installed between the shaft and mechanical seal. Mechanical seals with face type ceramic seat, carbon washer, stainless steel metal parts and Buna elastomers are designed for water service and light hydrocarbons up to 200 F. Rotech DN Series Pumps are supplied with enclosed dynamically balanced impellers for smooth, low vibration operation. DNJ SERIES PUMPS: DNJ Pumps are furnished with enclosed dynamically balanced implellers for smooth, low vibration operation. DNJ Series pump designed tough, versatile products to meet your pumping needs. DNJ Series pump delivers variety, durability, standardized options and con gurations. Please contact us to nd out more about DNJ Series options & prices.

HYDRAULIC COVERAGE 400 Selection Chart 800 RPM 300 200 50 40-32 50-32 65-32 80-40 80-32 00-40 25-40 50-40 HEAD - FEET 00 80 60 50 40 32-26 32-20 32-6 40-20 40-6 40-26 50-26 50-20 50-6 65-6 80-26 65-26 80-20 65-20 80-6 00-32 00-26 00-20 25-20 25-32 25-26 50-32 50-26 50-20 30 20 32-3 40-3 50-3 65-3 5 0 2 20 30 40 60 80 00 50 200 300 400 600 800 000 200 500 900 2700 300 550 FLOW - U.S.G.P.M Selection Chart 3600 RPM 450 32-26 50-26 300 32-20 40-26 65-26 80-26 90 32-6 40-20 50-20 65-20 80-20 HEAD - FEET 00 80 60 32-3 40-6 40-3 50-6 50-3 65-3 65-6 80-6 40 30 20 0 5 20 30 40 60 80 00 50 200 300 400 600 800 000 400 800 FLOW - U.S.G.P.M

EXPLODED VIEW 2 7 6 5 4 3 0 9 8 7 5 4 3 6 2 ITEM QUANTITY PART DESCRIPTION MATERIAL JM Motor Cast Iron / Aluminium 2 Key Steel 3 Slinger Rubber 4 Shaft Sleeve Bronze or Stainless Steel 5 Adaptor Cast Iron 6 4 Bolt Carbon Steel 7 4 Nut Carbon Steel 8 Mechanical Seal Car / Cer / NBR as normal 9 8 Bolt or Stud Carbon Steel 0 Impeller C.I / Bronze / Stainless Steel Impeller Nut Carbon Steel 2 Spring Washer Stainless Steel 3 Hex Pocket Head Bolt Carbon Steel 4 O-Ring NBR 5 or 2 Wear Ring C.I / Bronze / Stainless Steel 6 Pump Casing Carbon Steel 7 2 Plug Carbon Steel Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) 969-290 Fax: -(59) 969-2047 Email: sales@windsorpump.com Dan Kurtz Phone: -(226) 377-400 Fax: -(905) 847-2425 Email: dan@windsorpump.com www.windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) 302-3933 Fax: -(905) 847-2425 E-mail: peter@windsorpump.com www.windsorpump.com

Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) 969-290 Fax: -(59) 969-2047 Email: sales@windsorpump.com Dan Kurtz Phone: -(226) 377-400 Fax: -(905) 847-2425 Email: dan@windsorpump.com www.windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) 302-3933 Fax: -(905) 847-2425 E-mail: peter@windsorpump.com www.windsorpump.com

DN SERIES PUMPS END SUCTION FRAME MOUNTED

DN SERIES PUMPS These are general purpose, frame mounted end suction pumps exibly coupled to drivers. Each entire unit can be mounted on a common base plate. APPLICATIONS: DN Series pumps are designed for applications in medium duty service, providing maximum pump value in heating and air conditioning, booster and general circulating services. SPECIFICATIONS: Capacities - Up to 3000 GPM Pressure - Up to 75 psi Temperature - From 32 F to 200 F Liquids - Water and Light hydrocarbons Head - Up to 400 feet Horsepower - Up to 200 hp Drives - Electric Motors Materials - Cast Iron, Bronze, Stainless Steel FEATURES: DN Series Pumps are available in cast iron bronze tted and all iron Materials of Construction Pump casing is tted with a bronze / cast iron replaceable wear ring. Motor bearings are grease lubricated and are sized for a minimum of 20,000 hours L0 basic rating life or,00,00 hours median bearing life. The motor / impeller shaft is protected with a replaceable sleeve installed between the shaft and mechanical seal. Mechanical seals with face type ceramic seat, carbon washer, stainless steel metal parts and Buna elastomers are designed for water service and light hydrocarbons up to 200 F. DN Series Pumps are supplied with enclosed dynamically balanced impellers for smooth, low vibration operation.

EXPLODED VIEW 7 8/ B 8/ A 9 0 2 4 3 2 9 2 3 4 5 6 2 6 4 2 2 2 2 4 3 2 9 2 8 5 8 9 27/ 27/ B C 2 0 27/ A 7 2 5 2 6 PART # PART DESCRIPTION Plug 2 Pump Casing 3 Casing Wear Ring 4 Casing O-Ring 5 Impeller Nut 6 Spring Washer 7 Impeller 8A Shaft Sleeve 8B Abutment Ring 9 Mechanical Seal 0 Casing Cover 2 3 4 5 Slinger Inboard Bearing Cover Inboard Lip Seal Gasket Stud PART # 6 7 8 9 20 2 22 23 24 25 26 27C 27B 27A PART DESCRIPTION Bolt Inboard Bearing Bearing Housing Shaft Sleeve O-Ring Key Shaft Shaft Outboard Bearing Outboard Lip Seal Outboard Bearing Cover Nut Rear Foot Support Flat Washer Spring Washer Bolt Bolt 28 29 Grease Nipple Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) 969-290 Fax: -(59) 969-2047 Email: sales@windsorpump.com Dan Kurtz Phone: -(226) 377-400 Fax: -(905) 847-2425 Email: dan@windsorpump.com www.windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) 302-3933 Fax: -(905) 847-2425 E-mail: peter@windsorpump.com www.windsorpump.com

RVI 80 SERIES Vertical Inline Pumps

RVI80 SERIES VERTICAL INLINE PUMPS Vertical Inline Pumps are close coupled pumps designed for easy installation and can be mounted to a pipe line. The Suction and Discharge connections are on the same center line in opposite direction at 80 apart. DESIGN FEATURES Easy to install without disturbing piping. Close coupled pumps, eliminates needs for extra Space, Rigid base or alignment. Can be installed vertically or Horizontally. Impeller is mounted on motor shaft, minimizes run out. Pump Adaptors are interchangeable with same series of pump sizes. Pumps are supplied with mechanical seals. Flush line provided for the cooling of seal faces. MAJOR APPLICATIONS Heating and Air conditioning. Pressure Boosting systems. Apartment building. Industrial Process Systems. General Circulating water services. EXPLODED VIEW 4 5 3 7 8 6 2 2 ITEM 2 3 4 5 6 7 8 9 0 QTY 2 3 2 PART NAME Pump Casing Impeller Adaptor Motor Shaft sleeve Slinger Mechanical, Seal, Stationery Mechanical, Seal Rotary Gasket Plug Impeller, Screw Impeller, Washer Bolt MATERIAL Cast Iron C.I. / Bronze / Stainless Steel Cast Iron Var Bronze or Stainless Steel Rubber Ceramic / EPDM cupset as standard Carbon/EPDM Stainless retainer & spring as standard Non Asbesters Steel Steel Brass Steel 9 0

Space required for DIS-Mantling V Q Suction Guage Tapping Discharge A X, Ø Y Holes on Z PCD EQ.SP. N N M Dimensions - Inches (mm) B S U T W Volute base ring Tapped for./ 25# ANSI Flange to support pump PUMP DIMENSIONAL DATA SIZE /2x /2-7 2x2-7 2 /2x2 /2-7 3x3-7 4x4-7 25# ANSI A B 250# ANSI 25# ANSI 250# ANSI N M W U S T A B X Y Z X Y Z 5 9/6 6 /8 3/6 8 (203) 6 (406) 6 5/8 6 /2 7/8 8 /2 (26) 7 (432) 4-3/4 (2) 5 /4 (33) 7 /6 7 /2 9 (229) 8 (457) 5 (27) 7 /2 3/4 8 /4 /8 9 5/6 0 /4 9 /2 (24) 0 /2 (267) 9 (483) 2 (533) 5 /4 (33) 6 3/4 (7) 4-5/8 (7) 4-3/4 (2) 5 5/8 (43) 6 /4 (59) 5 /4 (40) 4 3/8 () 4 7/8 (24) 5 /4 (33) 5 /2 (40) 6 3/8 (62) 9 3/8 (238) 0 (254) 0 5/8 (270) /2 (292) 2 /4 (3) 3 7/8 (98) 4 7/8 (24) 5 /2 (40) 4 4 4 6 (52) 4 7 /2 (90) 8 5/8 (4) 3/4 (9) 3/4 (9) 3/4 (9) 3/4 (9) 4 /2 (4) 4 5 (27) 8 5 7/8 (49) 6 5/8 (68) 7 7/8 (200) 8 8 8 7/8 (22) 3/4 (9) 7/8 (22) 7/8 (22) 7/8 (22) S (max)* /2 (38) /2 (38) /2 (38) /2 (38) /2 (38) X-PCD Y - NO. OF HOLES Z - DIAMETER OF HOLES MOTOR DIMENSIONS MOTOR FRAME Q (max) V 43JM 0.046 (255) 7 (78) 45JM.045 (280) 7 (78) 82JM.738 (298) 8.740 (222) 84JM 2.762 (324) 8.740 (222) 23JM 4.42 (366) 2.65 (309) MOTOR FRAME Q (max) V 25JM 5.96 (404) 2.65 (309) 254JM 9.2 (485) 2.283 (32) 256JM 20.852 (530) 2.283 (32) 284JM 2.906 (556) 4.000 (355) 256JP 20.852 (530) 2.283 (32) ITEM /2x /2-7 2x2-7 2 /2x2 /2-7 3x3-7 4x4-7 43JM 54JM 82JM 84JM 23JM 25JM 254JM 256JM 284JM 256JP R P R P R P R P R P R P R P R P R P R P 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 9.05 (7) 9.55 (497) 20.7 (52) 20.42 (520) - - 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 20.05 (50) 20.55 (522) 2.7 (540) 2.42 (545) 22.55 (573) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 20.74 (527) 2.24 (540) 2.86 (555) 22. (562) 23.24 (590) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 2.76 (553) 22.26 (565) 22.89 (852) 23.4 (588) 24.26 (66) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 23.42 (595) 23.92 (608) 24.55 (625) 24.80 (630) 25.92 (658) 4-5/8 (7) 4-5/8 (7) 4-7/8 (24) 4-7/8 (24) 5-/8 (30) 24.92 (633) 25.42 (645) 26.04 (660) 26.29 (668) 27.42 (696) - - - - - - 8-/2 (26) 8-3/4 (222) 8-3/4 (222) 9 (229) 32.50 (825) 33.2 (840) 33.37 (848) 34.50 (876) - - - - - - - - - - - - 9 (229) 36.23 (920) 9 (229) 37.28 (947) 8-/2 (26) 33.77 (858) 8-3/4 34.33 (222.4) (872) 8-3/4 (222.4) 34.8 (884) 8-3/4 26.29 (222.4) (892) 9 (229) 36.23 (920)

OTHER PRODUCTS DNJ Series End Suction Close Coupled Pumps DN Series End Suction Frame Mounted Pumps 96 Series ANSI Chemical Process Pumps 96LF series Low Flow ANSI Pumps 296 Series ANSI Close Coupled Pumps 796 Series ANSI Self Priming Pumps RCP Series End Suction Pumps RST Series Stainless Stamped End Suction Pumps RVMS Series Vertical Multistage Centrifugal Pumps SPT/SPU Series Self Priming Trash Pumps SCP/SFP Series Self Priming Pumps S00 Series Sanitary Centrifugal Pumps L00 Series Lobe Pumps RDSL Series Horizontal Multistage Centrifugal Pumps 300 Series NPT & 500 Series Flanged Ball Check Valves Various Mechanical Seals Apart from the listed above, we offer an array of other products too. Contact us for further details. Head Office 3057 Marentette Ave Windsor, On N8X 4G Phone: -(59) 969-290 Fax: -(59) 969-2047 Email: sales@windsorpump.com Dan Kurtz Phone: -(226) 377-400 Fax: -(905) 847-2425 Email: dan@windsorpump.com www.windsorpump.com Sales and Engineering Peter Kurtz Phone: -(905) 302-3933 Fax: -(905) 847-2425 E-mail: peter@windsorpump.com www.windsorpump.com