www.joysun-machinery.com 上海久信机电设备制造有限公司 Shanghai Joysun Machinery & Electric Equipment Manufacture Co., Ltd
Sino-foreign joint venture Shanghai Joysun Machinery & Electric Equipment Manufacture Co., Ltd is located in Zhangjiang High-tech East Area, Shanghai and belongs to the Shanghai high and new technology enterprise. Our company has the factory building more than 10,000m 2 and the R&D engineers and technicians more than 30. We apply the German advanced technology in single-step rotary vacuum pump and CAD/CAE/CAM manufacture technology and ensure the quality and performance of the products. And now, we win favorable feedback from various overseas customers, such as Spain, Netherlands, Sweden, United Kingdom, Italy, USA, Canada, Australia, Poland, India, Iran, etc, due to reliable quality and perfect service. PRINCIPLE OF VACUUM: Inside the round pump body with both sucking valve and exhausting valve, there installed a centrifugal rotor and a rotor trough with three vanes driven by centrifugal power. The vanes separate the pump inner space into three parts and the respective volume changes periodically while the rotor turns. The sucking, compressing and exhausting stages eliminate the air at the inlet and achieve the state of vacuum. GOOD CHARACTERISTIC 1. High utmost vacuum rate, it can be less than 0.5mbar 2. High deflating speed 3. Low noise while working, lower than 67db 4. Reliable structure to prevent oil circumfluence 5. Strong capacity in deflating the vapor 6. Keeping inlet air pressure 1.33*10 3 Pa, it can be still working on. 7. Protecting environment; an oil fog clearer is set in the vacuum, and no oil fog in the exhaust air 8. Tight structure, scientific and reasonable design, and it is easy to install in the industry system
APPLICATION RANGE: Packaging, Sticking Packaging used by vacuum or inert gases for varied foods, metal items and electronic elements. Sticking for photographs and advertisement sheets. Lifting, Transportation, Sticking, Loading/Unloading Lifting of glass plate Sticking of board, plastic plank Loading/Unloading of non-magnetism item Loading/Unloading and transportation of paper sheets and paper boards in paper making and printing industry Transportation of powder materials Drying, Air-eliminating, Dipping Dipping and drying of electronic elements Air-eliminating of moulds, dopes and vacuum furnace Others: Laboratory Devices Medical Treatment Devices Freon Recycling Vacuum Heat Treatment X SERIES SINGLE STAGE ROTARY VANE VACUUM PUMP
Model Unit X-10 X-20 X-25 X-40 X-63 X-100 X-160 X-202 X-250 X-302 Rated Deflating Speed m 3 /h 10 20 25 40 63 100 160 200 250 300 Utmost Pressure mbar 2 2 2 0.5 0.5 0.5 0.1 0.1 0.1 0.1 Noise db 69 73 73 65 65 67 70 72 72 74 Max. Oil Temperature 0 C 100 100 100 80 80 84 95 100 100 100 Oil Consumption L 1 1 1 1 2 2 5 5 5 5 Dimension Input Inch G1/2 G1/2 G1/2 G1¼ G1¼ G1¼ G2 G2 G2 G2 Motor Power Kw 0.37 0.75 0.75 1.5 1.5 3 4 4 5.5 5.5 Rotary Speed rpm 1450 2900 2900 1400 1420 1420 1440 1440 1440 1440 Weight kg 18 19 20 45 55 70 150 160 195 195 JX/JXX/JXXX SERIES COMBINED VACUUM PUMP Summarization This series single stage rotary vane vacuum pump group is new type vacuum suction equipment, combined one/two/three X type single stage rotary vane vacuum pump with buffering air tank and electric-supply box, thus making up the shortage in usage of the former one. Feature Enlarging the capacity of suction It can increase the total or instant suction using two or above vacuum pumps and a buffering air tank. Saving electrical power----- It can make this with a buffering air tank equipped with vacuum meter. (It depends on the actual circumstance) Extending its using life----- With the two or above vacuum pumps running alternately,
it can reduce the raise of pump s temperature to prevent over-heating. It cuts the running time under the control of vacuum meter. It can prevent foreign matter or granule entering the vacuum pump with buffering air tank and inlet filter. Prevent oil circumfluence---- The group adds the part of oil-back preventing. The oil won t be sucked into the vessel when the equipment stops. Application Range This series Vacuum pump is suitable for applying on the environment of temperature between 5~30 and humidity less than 80%, our X series vacuum pump is capable to deflate air less than one atmosphere from vessel, it is prohibited to use for the gas with acidity, cauterization, toxin, flammability, explosive and any elements which can court damage of pump. This series single-grade rotating patch vacuum pump can be applied to the work of vacuum absorbing plastic film, vacuum packing, vacuum exhausting, vacuum Air-eliminating, vacuum suction, vacuum distillation, vacuum abruption, vacuum molding, vacuum casting, vacuum transportation, vacuum heat treatment and welding etc. the applicable field includes hospital, machine, chemical, metallurgy, electron, electric, press & textile etc. This series single-stage rotary vane pump also can be combined according to using-purpose to enlarge use range: 1. Enlarge deflating capacity 2. Suck mass of vapor Technical parameter for JX series combined vacuum pump Items Model Unit JX40 JX-63 JX-100 JX-160 Rated Speed m 3 /h 40 63 100 160 Utmost Pressure mbar 0.5 0.5 0.5 0.5 Pump set X-40: 1 set X-63: 1 set X-100: 1 set X-160: 1 set Vent Size Inch 1* G1¼ 2* G1¼ 2* G1¼ 1* G2 Volume Tank L 100 170 170 100 Time delay control for Pump starting h 1-8 1-8 1-8 1-8 Inlet Size Inch G1¼ G1¼ G1¼ G2 Motor Rated power kw 1.5 1.5 3 4 Vacuum pump size m 1.1 0.54 0.95 1.2 0.55 1.15 1.2 0.55 1.15 1.15 0.55 1.25 Total Weight kg 95 120 135 250 Technical parameter for JXX series combined vacuum pump
Items Model Unit JXX-200 JXX-163 JXX-126 Rated Speed m 3 /h 200 163 126 Utmost Pressure mbar 0.5 0.5 0.5 Pump set X-100: 2 set X-63: 1 set X-100: 1 set X-63: 2 sets Vent Size inch 4* G1¼ 4* G1¼ 4* G1¼ Volume Tank L 500 500 500 Time delay control for Pump starting h 1-8 1-8 1-8 Inlet Size mm 50 50 50 Motor Rated power kw 2 3 3+1.5 2 1.5 Vacuum pump size m 1.6 0.8 1.36 1.6 0.8 1.361 1.6 0.8 1.361 Total Weight kg 250 235 220 Technical parameter for JXXX series combined vacuum pump Items Units JXXX-300 JXXX-263 JXXX-226 Model Rated speed m 3 /h 300 263 226 Utmost Speed mbar 0.5 0.5 0.5 Pump set X-100: 3sets X-100: 2 sets X-63: 2 sets X-63: 1 set X-100: 1 set Vent size inch 6* G1¼ 6 G1¼ 6* G1¼ Tank Volume L 100( on 100 ( on 100 ( on requested) requested) requested) Time delay control for Pump starting h ( on requested) ( on requested) ( on requested) Inlet size mm 80 80 50 Motor Rated power kw 3 3 2 3+1.5 2 1.5+3 Vacuum pump size m 1.5 0.75 1.2 1.5 0.75 1.2 1.5 0.75 1.2 Total Weight kg 300 285 270