INFRARED BUILDING HEATING BOARDS
INFRARED BUILDING HEATING BOARDS Electric cables at the back of the Heat Decor board Electric cables at the side of the Heat Decor board Heat Decor boards are infrared electrical heaters which can be used by decoration materials. Heat Decor boards are designed for internal wall constructions, ceilings and floors for dry walls systems. The boards are adapted for putting, painting, decoration with ceramic and stone sidings - in dry spaces and spaces with increased humidity. The board have built inside electrical energy saving system - Ecoline, which decreases electrical energy consumption proportionally to the rise of the board s temperature. The boars are easy and quick to install and very functional as infrared surface heating. Heating by Heat Decor boards allows discretion of designing and interior arrangement. The construction of Heat Decor board consists of the mixture of magnesian cement, covered with fibreglass, with the carbonate heating system built inside. The boards have normative endurance parameters and high heating efficiency. The heating board consists of two separate heating element (P1, P2), each of them with separate electric power supply at the back or side of the board, each of them can be used separately (by cutting the board) or as one bigger board. The heating elements are marked by a red, dashed line (heating surface) on the board surface. -2-
FUNCTIONALITY of infrared building heating boards 2 1. Cutting down of the board to size required 3 2. Cutting the board into two separate heating boards 1 3. Electric box 4. Electric socket 5. Self tapping screws 6. Heating surface 6 The construction of the heating board allows: its cutting down to size required separation of the board into two separate heating units (along with the dashed line separating heating surfaces), instalment of the electric sockets, boxes, temperature sensors or decoration elements beyond the heating surface of the board (marked on the board in red line) joining of the heating boards in series or parallel connection to get the required heating surface. 5 4 Heat Decor heating boards can be assembled to the construction of the dry building with th usage of the sheet metal screws used beyond the heating surface. The heating surface (marked in red line) shows the border zone on which boring holes, piercing and other damaging act are not allowed. -3-
USAGE of infrared building heating boards Wall heating on steel construction (covering wall) - spaces with increased humidity 1. Heat Decor heating board 2. Steal construction - for dry walls systems 3. Cable for installation Heat Decor board 4. A hole in a steal structure for an installation cable 5. Mineral wool insulation 6. Water vapour barrier 7. Self tapping screws 8. Fully flexible joint sealant 9. Waterproofing with liquid rubber 10. Grouts layer 11. Fully flexible glue for ceramic and stone tiles 12. Surface finish of ceramic or stone plates cm 2 1 8 12 11 10 9 7 6 5 4 3-4- -4-
Wall heating on steel construction (partition wall) - dry spaces 1. Heat Decor heating board 2. Heat Decor heating board 3. Steal construction - for dry walls systems 4. Cable for installation Heat Decor board 5. A hole in a steal structure for an installation cable 6. Mineral wool insulation 7. Water vapour barrier 8. Self tapping screws 9. Elastic gypsum putty with reinforcement tape 10. Grouts layer 11. Fully flexible gypsum putty 12. Paint finish (with layer grouts) cm 3 1 12 11 10 9 8 2 7 6 5 4-5-
Ceiling heating on steel construction 1. Heat Decor heating board 2. Steal construction - for dry walls systems 3. Elektric box - for Heat Decor board installation and power supply 4. Cable for installation Heat Decor board 5. Water vapour barrier 6. Mineral wool insulation 7. Self tapping screws 8. Elastic gypsum putty with reinforcement tape 9. Grouts layer 10. Fully flexible gypsum putty 11. Paint finish (with grouts layer) 4 3 cm 6 5 2 1 8 7 9 10 11-6-
Underfloor heating 1. Heat Decor heating board 2. Concrete or wooden construction 3. Full lfecible glue over the entire surface 4. Elektric box - for Heat Decor board installation and power supply 5. Fully flexible joint sealant 6. Waterproofing with liquid rubber in the case of spaces with increased humidity 7. Grouts layer 8. Fully flexible glue for ceramic and stone tiles 9. Floor material 4 1 7 8 9 5 6 2 3-7-
ENERGY SAVINGS of infrared building heating boards Electic energy consumption in relations to the board s temperature by the example of Heat Decor Ecoline E- Board Heat Decor heating boards are highly ecological Heat Decor board s temperature 10 C 20 C 30 C C 50 C C Energy saving Heat Decor Ecoline board Electric energy consumption [W] [%] 318,12 292,38 277,53 262, 255,09 100 96, 88, 84,10 79,50 77,30 Diagrammatic presentation of the electic energy consumption in relations to the Heat Decor board s temperature 0 Electric energy consumption [W] 375 0 325 300 275 250 Energy saving Heat Decor Ecoline board 225 200 0 C 10 C 20 C 30 C C 50 C C PERFORMANCE Thermal image of the surface heating by Heat Decor board. Even heat distribution and high efficiency of surface heating. C 16 C -8-
KINDS OF BOARDS Dimensions and parameters R1 R2 R1 F C B P1 P2 E H D D Infrared building heating boards Heat Decor Ecoline - electric cable at the back side of the board A cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 1. Heat Decor E-4 P1: P2: 4 2. Heat Decor E- P1:165 P2:165 3. Heat Decor E- 4. Heat Decor E-/12 ~19 5. Heat Decor EF-4 P1: P2: 4 6. Heat Decor EF- P1:165 P2:165 7. Heat Decor EF- 8. Heat Decor EF-/12 ~24 Infrared building heating boards Heat Decor Powerline - electric cable at the back side of the board cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 51. Heat Decor P-800 P1:0 P2:0 800 52. Heat Decor P-0 P1:300 P2:300 0 53. Heat Decor P-0 P1:200 P2:200 0 54. Heat Decor P-0/12 P1:200 P2:200 0 ~19
KINDS OF BOARDS Dimensions and parameters R1 R2 R1 F C B P1 P2 E H D D Infrared building heating boards Heat Decor Ecoline - electric cable at the side of the board A cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 9. Heat Decor ES-4 P1: P2: 4 10. Heat Decor ES- P1:165 P2:165 11. Heat Decor ES- 12. Heat Decor ES-/12 ~19 13. Heat Decor EFS-4 P1: P2: 4 14. Heat Decor EFS- P1:165 P2:165 15. Heat Decor EFS- 16. Heat Decor EFS-/12 ~24 Infrared building heating boards Heat Decor Powerline - electric cable at the side of the board cat. nr Model Dimensions [mm] A B C D E F R1 R2 H Heating power [W] Using Max Weight [kg] 55. Heat Decor PS-800 P1:0 P2:0 800 56. Heat Decor PS-0 P1:300 P2:300 0 57. Heat Decor PS-0 P1:200 P2:200 0 58. Heat Decor PS-0/12 P1:200 P2:200 0 ~19
TECHNICAL PARAMETERS of infrared building heating boards The kind of heating IR infra-red waves Heating element Carbonic Fibre Rated voltage 230V, 50Hz Power supply two independent sources (for two heating zones) The length of electric cords 3m Protection against externals penetration IP X5 Cover material Magnesian cement with fibreglass Fire resistance of the cover A2-s1, d0 The usage of heating boards for internal constructions cover (overlay) of walls, partition walls, ceilings, floors (in both dry spaces as well as in spaces with increased humidity) Possible finishing of the boards putting, painting, decoration with ceramic or stone sidings Endurance for burdening with objects fixed to the boards (force applied by a single assembly pin Molly) 1,7 kn pulling out (173 kg) 2,5 kn on the wall (255 kg) Bending strength F7 Compression strength C12 Acoustics 19 db Thermal conductivity of the heating board s isolation side λ [W/mK] 0,155 Dimension stability in different atmospheric and moisture conditions (temperature.: + C, humidity % and temperature.: -20 C Length and width 0,02 % Thickness 1 % INFRARED BUILDING HEATING BOARDS Heat Decor heating boards are highly ecological Heat Decor ul. Mały Płaszów, Kraków POLAND Tel: +48 12 7 61 34 www.heatdecor.com biuro@heatdecor.com TECH N OLOGY PATENTED, A L L RIGHTS R ESERV ED.