THE INITIATES PLC (TIP)

Similar documents
THE INITIATES PLC (TIP) Waste Management & Industrial Cleaning Services

THE INITIATES PLC (TIP) Industrial Cleaning & Decontamination Services

Your Equipment Manufacturer for Material Processing. Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION

BLABO. Non-man entry tank cleaning and oil recovery system. Automated tank cleaning and. Designed for large, containing crude oil or heavy fuel oil

TDU-R Thermal Desorption Unit Technical overview

Responsible Care Product Stewardship for Refrigerants

CLEACOM Engineered System Solutions. Established 24/7 technology for the separation of dust and fume during compounding processes

CORPORATE PROFILE. Contents 1 Introduction 2 Products and Services 3 Contact Us 10

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

ecodry Figure 1 - Process Diagram ecodry B General Process Description

FLOATING SUCTION DREDGER ATEX ZONE 1 CERTIFIED!

Boiler Basics. Design and operation

Blast system for PCB-restoration

Technical Discussion on

ENERGY RECOVERY SOLUTIONS. Recover wasted energy to increase efficiency and save money immediately.

Introduction to Control Technology

a. CFCs. b. HCFCs. c. Pressurized nitrogen. d. Compressed dry air. 17. The state of the refrigerant leaving the condenser of a refrigeration system

INTEC Engineering GmbH Energy systems

PURPOSE OF THE PROCEDURE

Quality Construction Equipment

P23 MELT CONFINED SPACE LOG

a. CFCs. b. HCFCs. c. Pressurized nitrogen. d. Compressed dry air. 17. The state of the refrigerant leaving the condenser of a refrigeration system

TABLE 2 UNACCEPTABLE WASTES, PROBLEM MATERIALS, AND SPECIAL WASTES

EVAP Project BACKGROUND EVAP UNIT

Indonesian Oil. May Native owned and producing oil wells on the island of Java, near CEPU Photos and story by Allen Johnston

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document

CLIENT PROJECT. Schematic representation of sludge treatment at WWTP Homburg

ELC International Inc

integrated sludge treatment combined sludge drying and incineration

AUTOMATIC SOLUTION FOR CONTINUOUS OUTPUT OF MILL-SIZE BALES

VAPOUR RECOVERY DURING FUEL LOADING. Ben Adamson Principal Engineer Refrigeration Engineering Pty Ltd, NSW Australia

Environmental Expenditures. by the U.S. Oil and Natural Gas Industry

PORTABLE PILOT TEST UNIT. Mike Hill Shirco Infrared Systems, Inc.

ANDRITZ SEPARATION Thermal Treatment of Sludge

For inspection purposes only.

Offshore Drilling & Pipeline Equipment

Enviro International Corporation. WET SCRUBBER

MAGNUM MAX ASPHALT PLANTS

SOLAR Sludge Drying NATURETECH ENVIRO PROTECTION LTD. I+M GMBH & CO.KG

Beneficial Use of Landfill Gas for Leachate Evaporation and Power Generation

HEATEC PRODUCTS AND SERVICES THAT EXCEED YOUR EXPECTATIONS

Problem Cause Remedial action. Gauge glass There was excess chemical dosage The normal ph recommended was 9.5 to See photo 3 & 4.

Keywords biomass boiler, biomass resource, Small scale sewage treatment plant, twin drum type dryer,

Daikin s Policy. and Comprehensive Actions on the Environmental Impact of

14. The center port of the manifold is used for evacuation, charging and refrigerant recovery.

TECHNICAL DATA MOBILE WASTE INCINERATOR

Integrated Solutions for the. Pulp & Paper. Industry. Engineered Products for Process Industries

thermal processing of Carbon fiber oxidation, composite curing, solution heat treating

ANNEXURE 1 KEY PLAN. Project site. Application Form 1 for Amendment in Environmental Clearance for M/s. Windson Chemical Pvt. Ltd.

SX SOLIDS PUMPS VOLUME ONE ISSUED JANUARY 21, 2013

Image_engl_08:Image-engl-RZ :55 Uhr Seite 1. INTEC Engineering GmbH Energy systems

Series 57 WATER/OIL SEPARATORS

Boiler MACT Deadline Is Here, Are You In Compliance? Sponsored by

kl-direkt WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes Special edition: Wind Power

Asphalt Plant Systems

DRY BULK HANDLING SYSTEM

Venturi wet scrubber VDN Separation of combustible, explosive, humid and adhesive dusts

Reference Document RD-0007-E GUIDELINES FOR THE UTILIZATION OF R-404A R-452A. Page 1 of Tecumseh Products Company LLC. All rights reserved.

Equipment guide for local exhaust ventilation (LEV)

Air treatment solutions. Aftercoolers & condensate treatment

Quality Construction Equipment. ASPHALT BATCH MIX PLANT ANP Series tph. Star Export House

Condensate Treatment Solutions. CTS Series Eliminator II Oil-Water Separators

OPERATING INSTRUCTIONS FOR THE TP18SX-HP

Explosion Protection Engineering Principles

Vacuum - The Universal Conveying Force Suction and transportation of powders, liquids and gases

FIRE SUPPRESSION SYSTEM

ADVANCED Series 15P1 17P2 19P2

The specification for the equipment supplied complies with the standards of INNOPLANA UMWELTTECHNIK AG and its sub-contractors.

ZL High-efficiency Vacuum Insulation Oil Purifier

LIST OF OISD STANDARDS (April 2016)

AS PER US SPECS. Offering High Quality Asphalt Drum Mix Plants Both In Stationary & Mobile Versions ASPHALT & CONCRETE EQUIPMENT.

Oil & Gas Sealing Capabilities

Web:

This is not a New Idea! Food scraps collection 100 years ago:

INTRODUCING CLINICAL WASTE SOLUTIONS LTD

Vacuum Gauge. Measures lower-than-atmospheric pressure Digital scales. microns psi in. Hg millibars pascals torr millitorr

P Square Technologies

Energy recovery from exhaust gases using Heat Pipe technology

SX SOLIDS PUMPS PNEUMATIC CONVEYING UNITS

LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME. Recommended Practices on Oil Storage and Handling OISD-STD-109

SX SOLIDS PUMPS VOLUME ONE ISSUED MARCH 2015 SX SOLIDS PUMPS 1

Safer, simpler, cost-effective sludge drying :

R-407A R-448A R-449A

Information Guide Maintenance and Refrigerant Regulations. Issue 35

Concrete Water Recycling MIXER WASHING PLANT

Technologies, Solutions, and Applications. Continuous Level Coke Drum Measurement System

MICROWAVE HEATING SYSTEMS

LEAD RECYCLING PLANT. Battery Machine Manufacturers: Since 1989

Adaptation and Scale-Up of the Enefit Technology

...just the right thing for everyone - individually adapted

Thin Film. Optimizing Temperature Control 2. Preventing Excessive Vacuum 3. Minimizing Air Drawback 4

DEVELOPMENTS IN SOLVENT RECOVERY BY MEMBRANES

Theme: D REMEDIATION CONCEPTS & TECHNOLOGIES Lecture Session (LeS): LeS D.13 Soil treatment & other brand new ideas

Caractéristiques Unités Valeurs Méthodes. Appearance - Colourless Visual. Density (at 20 C) kg/cm³ 1,52 - Purity % 99,8 -

Madhu Honap HONEYWELL THERMAL SOLUTIONS INTRODUCTION

Design and Fabrication of Water Refrigeration System by Creating Vacuum

SolaGen Incorporated Process Engineering and Equipment. 150 Port Avenue St. Helens, OR Phone: Fax: Web site: solageninc.

Key Question. What is the most important aspect to the removal and cleaning of material?


Pre-cleaning for the CRC with Sponge Media Presented By: Ted Valoria Vice President, North America Sponge-Jet, Inc. Project TV

Transcription:

THE INITIATES PLC (TIP) THERMALDESORPTION SERVICES THE INITIATES PLC TDU, Incinerator, Cleaning & Decontamination, E-waste Services

Our Culture: Mission; vision; business core values OUR MISSION: To facilitate Industry and Man co-existence in safe Environment. OUR VISION: To be the Industry s leading provider of Waste Management and Industrial Cleaning services that eliminate clients exposure and protect the environment through: Adherence to best practices; Consolidation of experience; and Improvement aimed at adding value to our clients businesses and public life. CORE BUSINESS VALUE Professionalism (integrity; expertise; and standard) Innovation (a solution that is simple and efficient) Commitment (to safety; environmental protection; quality, and compliance to law). 2 E-Waste Incineration TDU Cleaning & Decontamination Consultancy Service

COMPANY PRESENTATION About Us Hazardous Waste Management & Industrial Cleaning Company: Thermal Desorption Drilling waste, Oily Sludge, & Oil contaminated Soil Waste Incineration Medical Waste, Chemical Waste, & other Hazardous Wastes Industrial Cleaning & Decontamination Water Jetting, Tank & Vessel, Heat Exchanger Cleaning, Asbestos Management E-Waste Management Office and Communication Equipment, Large & Small Household Appliances Waste Management Consultancy Waste Audit, Pollution Investigation, & Trans boundary Movement of Waste 1995 2005 Incorporated as a Waste Management Firm Providing Waste Management Consultancy Services Providing Waste Facility Construction and Management services to Clients 2006 2015 Installed a 10ton/hr TDU Facility Started Hazardous Waste Management Added Cleaning & Decontamination Services Converted to a Public Liability Company 2016 Forward Installed an E-Waste Management Facility Development of Incineration Facility.. Listed in Nigerian Stock Exchange Market Headquarter: Plot 400, Location (New) Road Off Aba/PH Expressway (By Oyigbo Junction) Umuebule 5, Rivers State, Nigeria 3 E-Waste Incineration TDU Cleaning & Decontamination Consultancy Service

INDUSTRY SPECIFIC SOLUTIONS: Thermal Desorption Services 10 tons/hr Indirect Thermal Desorption Plant Up to 96% hydrocarbon recovery less than 4ppm of oil in recovered water 3 stage Vapour Recovery System Waste pit storage capacity of 1200tons Digital weighing platform 100 Percent Regulatory compliant Treatment of: Drill Cuttings Oily Sludge Contaminated Soil Spent catalysts used in oil refineries Hazardous Waste Incineration 3tons/hr Capacity Rotary Kiln Incinerator Bi-chamber Incinerator capable of attaining 900 o C & 1200 o C and 2seconds residence time in the Secondary Chamber Activated Carbon & Wet scrubbing Systems Continuous Emission Monitoring System The Incineration Plant handles: Hazardous Waste Chemicals Solid & Liquid Waste Refining Residues Medical waste Sludge 4 E-Waste Incineration TDU Cleaning & Decontamination Consultancy Service

INDUSTRY SPECIFIC SOLUTIONS: E-Waste Management 1 tons/hr E-waste Processing Plant We process all types of e-waste including: Large Household Appliances Small Household Appliances Office and Communication Devices Lighting Equipment (fluorescent tubes, lamps) Ozone Depleting Substances (CFC & HCFC) Recovery Capability Cathode Ray Processing Printed Circuit board (PCB) Processing Cable Recycling Cleaning & Decontamination Vacuum Transfer System (VTS) Remote Pipe and Sewer Cleaning Unit Ultra/High Pressure Jetting systems (UHPJ &HPJS) Non Man Entry Automated Tank Cleaning Systems (NEATS) With these Systems we cleaning: FPSOs, Tanks, and Vessel Desludging Surface Cleaning Crude, Chemical and Product storage Tanks Heat Exchangers Tube and Fins Cleaning Pipelines, and Sewers Cleaning 5 E-Waste Incineration TDU Cleaning & Decontamination Consultancy Service

OFFICES & PROJECTS WORLDWIDE Waste Management Consultancy Trans-boundary Movement of Waste Pollution Investigation Remediation Planning Waste Auditing Facility Design, Construction, & Operation Operational Base: Rivers State, Port Harcourt 6 E-Waste Incineration TDU Cleaning & Decontamination Consultancy Service

s THERMAL DESORPTION UNIT 6

TECHNOLOGY OVERVIEW TDU Thermal Desorption Unit TIP Thermal Desorption Unit (TDU) is a 10ton per hour capacity Plant It is indirectly fired and recovers hydrocarbon contaminant of almost virgin quality through the 3 stage Vapor Recovery System. 7 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

INDUSTRIAL APPLICATIONS TDU Thermal Desorption Unit Process Representation 1. Feed Hopper 1A. Feed Transfer Conveyor 1B. Feed Injection Conveyor 2. Main Processor (Kiln) 3. Combustion Chamber 4. Ash Discharge Conveyor 5. Scrubber Tower 6. Mist Eliminator 7. Knock Out Pot 8. Mist Eliminator 9. Mist Eliminator 10. Waste Gas Blower 11. Condenser 12. Flame Arrestor 13. Oil Tank 14. Oil Recirculation Pump 15. Filters 16. Air Cooled Heat Exchanger 17. Filters 18. Oil Discharge Pump 19. Base Oil Storage Tank 20. Oil/Water Separator 21. Oil Tank 22. Oil Discharge Pump 23. Burner 24. Combustion Air Blower 25. I.D Fan Blower 26. Rotary Valve 27. Blower 28. Ash Discharge Bin 8 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

INDUSTRIAL APPLICATIONS TDU Plant Profile 1. About 600 850F temperature 2. Oil (96 99% of Original oil) 3. Extraction of light and heavy hydrocarbon 4. Water (Less than 5ppm of Oil) 5. Treated over 20,000tons of Oily sludge 9 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

INDUSTRIAL APPLICATIONS TDU Skip Turning, Washing and Return within 48 Hours at TIP Base 9 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

MUD SKIPS/CUTTING BOXES Mud Skip/Cutting Box is used for transportation and safe handling of hydrocarbon contaminated drill cuttings from offshore platforms. These units provide a safe and efficient means of drilling waste containment for transportation to treatment facility. Features: Designed and manufactured to DNV 2.7-1/ EN 12079/DOT 49CFR176.340 standards Certified slings complete with shackles are provided according to DNV 2.7-1/EN 12079 standards Design temperature -4 F, -20 C 25BBL/1050 gallons/4000 litre capacity Sealed lid prevents spillage during transportation Even when stacked two high, the sling on the upper sip is easily accessible Drainage points are standard Lightweight lid for safe and easy lifting, opening/ closing Large lid ensures ability to fill unit to maximum, improving logistics 10 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

TECHNOLOGY OVERVIEW Mud Treatment Storage &Treatment Technologies: Designed for: Storage of Drilling Mud Treatment of mud/cutting & sludge Technology: Skip turning Digital weighing platform 10tons/hr low temperature TDU with dust control system Environmentally friendly 99% material recovery 11 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

TECHNOLOGY OVERVIEW Solidification Solidification of Ash Ash gotten from treated mud/cutting Fixed after Laboratory analysis Technology : This is dependent on the level of toxic metals and NORMS in the residue. The residue and other additives are mixed using pre-determined ration of Sand, Cement and Residue. Water is further added to the blended composite. The mixture is cast and allowed to cure for a period of 21 days. The curing period includes intervals of watering to enhance controlled dehydration and strength development of the principal binding material (Cement) 12 Incineration TDU Cleaning & Decontamination Trans boundary Consultancy Service

Thank you for your interest Contact Details: Mr. Ossai R. M. Managing Director rmossai@initiatesgroup.com Tel: +234 (0) 84 669510 For further information: wms@initiatesgroup.com www.initiatesgroup.com