European Technical Assessment ETA-13/0407 of 11 March 2019 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction product Product family to which the construction product belongs Manufacturer Deutsches Institut für Bautechnik C4 & C5 TRAK-IT XH and HD Nails and DCN890 XH Nails Power-actuated fastener for multiple use in concrete for non-structural applications Stanley Black & Decker Deutschland GmbH Richard-Klinger-Straße 11 65510 Idstein DEUTSCHLAND Manufacturing plant Manufacturing Plant 4, Plant 9 and Plant 15 This European Technical Assessment contains This European Technical Assessment is issued in accordance with Regulation (EU) No 305/2011, on the basis of 12 pages including 3 annexes which form an integral part of this assessment EAD 330083-02-0601 This version replaces ETA-13/0407 issued on 9 February 2018 Z15486.19 8.06.01-784/18
European Technical Assessment ETA-13/0407 Page 2 of 12 11 March 2019 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and shall be identified as such. Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may only be made with the written consent of the issuing Technical Assessment Body. Any partial reproduction shall be identified as such. This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in particular pursuant to information by the Commission in accordance with Article 25(3) of Regulation (EU) No 305/2011. Z15486.19 8.06.01-784/18
European Technical Assessment ETA-13/0407 Page 3 of 12 11 March 2019 Specific Part 1 Technical description of the product The C4 & C5 TRAK-IT XH, HD Nails and DCN890 XH Nails are power-actuated fasteners which are placed into the concrete without previous drill by use of a gas actuated tool TRAK-IT C4, C5 or C5-ST or an cordless concrete nailer DCN 890. They are anchored in the concrete by sintering and mechanical interlock. The fastener (nail) is made of galvanised steel. The nails are arranged and connected with each other by special plastic strips that guides the nails in the gas actuated tool magazine. The product description is given in Annex A. 2 Specification of the intended use in accordance with the applicable European Assessment Document The performances given in Section 3 are only valid if the fastener is used in compliance with the specifications and conditions given in Annex B. The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the fastener of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works. 3 Performance of the product and references to the methods used for its assessment 3.1 Mechanical resistance and stability (BWR 1) Essential characteristic Characteristic values of resistance and displacements Durability Performance See Annex C1 Durability is ensured if the specifications of intended use according to Annex B are taken into account. 3.2 Safety in case of fire (BWR 2) Essential characteristic Reaction to fire Resistance to fire Performance Class A1 See Annex C1 4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base In accordance with EAD No. 330083-02-0601, the applicable European legal act is: 1997/463/EC (EU). The system to be applied is: 2+ Z15486.19 8.06.01-784/18
European Technical Assessment ETA-13/0407 Page 4 of 12 11 March 2019 5 Technical details necessary for the implementation of the AVCP system, as provided for in the applicable European Assessment Document Technical details necessary for the implementation of the AVCP system are laid down in the control plan deposited with Deutsches Institut für Bautechnik. Issued in Berlin on 11 March 2019 by Deutsches Institut für Bautechnik BD Dipl.-Ing. Andreas Kummerow Head of Department beglaubigt: Baderschneider Z15486.19 8.06.01-784/18
Page 5 of European Technical Assessment
Page 6 of European Technical Assessment
Page 7 of European Technical Assessment
Page 8 of European Technical Assessment
Page 9 of European Technical Assessment
Page 10 of European Technical Assessment
Page 11 of European Technical Assessment
Page 12 of European Technical Assessment