Process analyses with AQUACON -type tested analyzers Chief characteristic for realizing this product family was: best cost-benefit relationship, simple operation, adjustable nominal value, adjustable tracing between two analysis from 1 up to 99 min, high resulotion, programable recorder output 0 / 4... 20 ma, reliable and easy operation by automatic self-test, low consumption of water and reagent, as well as possibility of external start of analysis. The type tested process analyzer AQUACON offer easy operation: alteration of nominal value and other adjustment in dialog via keyboard. automatic routine operation including selftest and drift compensation. system is delievered ready for operation. Your benefit when use the type tested process analyzer AQUACON: high reliability of the system with less expenses by automatic supervision. quick drive to external instrument by adjustable nominal-and alarm value. adjustable scale value for recorder output allows legal documentation of analysis result. rebiable and less maitenance operation by microprocessor controled self-test. AQUACON Analyses with best cost-benefit relationship operation hints on front panel, so easy to handle clearly arranged installion on PVC wall mounting board ready to use alternativ also available in glass fibre plastic housing
The - type tested process analyzers AQUACON The type tested-process analyzers AQUACON consist of the control unit with LED-display, as well as an analysis unit with reaction chamber, measuring cell, dosing pump and valve with hose connectors.the control unit with a powerfull microprocessor takes care for the automatic procedure of analysis starting with sampling up to calculation, display and forwarding of the result. Besides the control of the analysis procedure the unit can turn on a relay accordingly an adjustable nominal value. So, the type tested process analyzer AQUACON are not only an automatic analyzer system but a complete control unit for manufacturing technology process. In addiction to the result of analysis the supervised process can be controled by activating pumps or valves for example. 1 Transmitter 2 Measuring chamber 3 Sample inlet valve 4 Peristaltic reagent pump 5 Reagent vessel (500 ml) Technical Data The here presented technical data and specification are valid for all type tested process analyzers of AQUACON family. Extensions or completions are presented on the following pages for specific parameters of analysis. Modes of operation: Manual Manual start of analysis. Automatic Permanent repetition of analysis after programed tracing. Hand Valve, stirrer and dosing pump can be switched single. Parameter setting Input for limit values and analysis parameter. Remote control Digital input remote start/stop. Display 3-digit LED for result, 3-digit LED for limit,1-digit LED for program Current output potential free, 0 / 4-20 ma, max. load 500 Ω Relays 1 x Alarm, potential-free 230 V 50/60 Hz, 3A 1 x Limit, potential-free 230 V 50/60 Hz, 3A External Switching potential free, 18 V DC, approx. 4 ma Connections Inline terminals 1,5 mm 2 Power Supply 115 or 230 V -- 50/ 60 Hz (see label for power level) Power Consumption max. 16 VA Protection IP 65 (transmitter housing) Dimensions 570 350 175 mm (H B D) Temperature 5 to 45 C, at consumption of reagents within 6 months Control unit and analyzer unit are complete mounted on a PVC board 570 350 10 mm (h b d). the analyzer unit is protected with a hood. Optional a glass fibre polyester wall housing with windowpane is available (h b d): 645 435 250 mm; Protection IP 66-9).
AQUACON RH-S (TÜV) TÜV-tested analyzer for measurement of residual hardness (1,0-10,0 µmol/l Alkaline earth ions) Application Supervision in quality for salt-less water AQUACON RH-S is the first Processtitrator type tested by TÜV Nord suitable for measurement of residual hardness in boiler feed water at salt-less operation. Developed particular for this application, AQUACON RH-S meets the qualification of: VdTÜV-leaflet Wasserüberwachung 100 for equipment with safety function in the meaning of pressure equipment directive 97/23/EG date 29.march 1997. type-test approval mark TÜV.WÜH.01-006 AQUACON RH-S meets the european pressure equipment directive CE/PED 97-23-EG valid as national law since may 2002 AQUACON RH-S marks a new standard for running steam-generation plants: cost saving operation of the boiler without constant supervision (BoB). High-level security by automatic supervision of hardness with a type tested supervision unit. Turn off and bolt the heating according to TRD 604 by adjustable nominal value. adjustable scale value for recorder output allows legal documentation of analysis result. Low running costs by automatic interval operation with minimal consumption of water and reagent. reliable and less maintenance operation.
AQUACON RH-S (TÜV) Application Complexometric titration of alkaline earth ions with a combination reagent consisting of titration medium and buffer after addition of a hardness specific marker. Technical details Type of Instrument Measuring range Resolution Accuracy Reproducibility Zero stability Sample Pressure Temperature Volume (ca.) Condition Chemical conditions Drain Reagents Number Storage temperature Consumption per analysis Reagent volume Number of analysis (appr.) Analysis Duration (approx) Break AQUACON RH-S 1,0 10 µmol/l alkaline earth ions (ca. 0,005-0,05 dh) 0,1 µmol/l 2% of end value 2% of end value automatic adjustment 0,1-10 bar 5-30 C 25 ml per Analysis (without flushing) clear, filtrated ph 4-10, Fe < 3 ppm, Cu < 0,2 ppm, absence of Al - und Mn - salts HCO 3 1- / CO 3 2- < 1 mmol/l free flow 2 0-30 C 0,2 2 ml (dependet on hardness) / 0,1 ml 500 ml / 250 ml 250 3-15 min incl. flushing (dependet on hardness) 1-99 min Hint The type tested AQUACON RH-S by TÜV NORD has different to the general technical description an additional three digit LED for display the adjusted nominal value. The control unit of this device is lockable. Order Informationen Model Order-no. AQUACON RH-S (TÜV) 690 2702 02 Reagent Order-no. Titrant RH B1000 500 ml 101 2702 01 101 2702 02 Indicator RH-Ind 250 ml 101 2702 03 101 2702 04 Options Order-no. Enclosure made of glass-fibre reinforced Polyester 125 0010 01 Control-valve for adjustment of sample flow 125 0014 01
AQUACON RH (TÜV) TÜV-tested analyzer for measurment of residual hardness AQUACON RH is the first Processtitrator type tested by TÜV Nord, suitable for measurement of residual hardness in boiler water and boiler feed water. Developed particular for this application, AQUACON RH meets the qualification of: VdTÜV-leaflet Wasserüberwachung 100 for equipment with safety function in the meaning of pressure equipment directive 97/23/EG date 29.march 1997. type-test approval mark TÜV.WÜH.001-01 AQUACON RH meets the european pressure equipment directive CE/PED 97-23-EG valid as national law since may 2002 AQUACON RH marks a new standard for running steam-generation plants: cost saving operation of the boiler without constant supervision (BoB). high-level security by automatic supervision of hardness with a type tested supervision of hardness with a type tested supervision unit. turn off and bolt the heating according to TRD 604 by adjustable nominal value. adjustable scale value for recorder output allows legal documentation of analysis result. Low running costs by automatic interval operation with minimal consumtion of water and reagent. reliable and less maintenance operation.
AQUACON RH (TÜV) Working principle The process titrator AQUACON RH (TÜV) determines automatic the hardness of samplewater discontinuous by complexometric titration.a special for this system suitable combination reagent of marker, titration medium and buffer will be pumped into the measuring cell by a high-level precision peristaltic pump and then blended with the sample.the titration comes to an end as soon as the marker changes his colour. With the amount of pump strikes, necessary for change of colour, the consumption of reagent and hardness degree of sample is caculated. Technical details Type of Instrument AQUACON RH (TÜV) Measuring range 0,02-0,5 dh Resolution 0,01 dh Accuracy 5% of end value Reproducibility 3% of end value Zero stability automatic adjustment Sample Pressure 0,1-10 bar Temperature 5-30 C Volume (approx.) Condition Chemical conditions Drain Reagents Number Storage temperature Consumption per analysis Reagent volume Number of analysis (appr.) Analyse Duration (approx) Break Order Informationen 25 ml je Analyse (without flushing) clear, filtrated ph 4-10, Fe < 3 ppm, Cu < 0,2 ppm, CO 3 2- < 10 mmol/l free flow 1 0-30 C 0,21 ml / 0,1 dh (dependent on hardness) 500 ml 2300 bei 0,1 dh 3 min incl. flushing, dependent on hardness 1-99 min Model Bestell-Nr. AQUACON RH (TÜV) 690 2709 02 Reagents Bestell-Nr. Titrant RH B2300 500 ml 101 2705 01 101 2705 02 Buffer reagent 1 (for high carbonate concentrations) 500 ml 101 2705 03 101 2705 04 Buffer reagent 2 (for high iron concentrations) 500 ml 101 2765 03 101 2765 04 Optionen Bestell-Nr. Enclosure made of glass-fibre reinforced Polyester 125 0010 01 Second dosing pump for buffer solution Control-valve for adjustment of sample flow 125 0011 01 125 0014 01 Hint The type tested AQUACON RH-S by TÜV NORD has different to the general technical description an additional three digit LED for display the adjusted nominal value. The control unit of this device is lockable. Options Second dosing pump for dosing of a buffer solution at high carbonate and/or iron concentrations to prevent interferences.