SmartONE Kit User Manual
Thank you for choosing BroadLink DNA series products
Packing List Please confirm the items are in good conditions as below SOS SmartONE x1 Wireless Key Fob Remote x1 Wireless Door Sensor x1 Wireless Motion Sensor x1 Infrared Installation Accessry Bracket base x1 Screw x2 Bolt x4 AA Battery x3 Wireless Door Sensor Installation Accessory 3M Adhesive Lable x2 Screw x2 Bolt x4 Guide Card x1 2
SmartONE Wi-Fi LED Status LED Ventilation Holes Reset Button Buit-in Buzzer Alarm * Device Reset - Long press the reset button for more than 6 seconds until the Wi-Fi LED is blinking rapidly 3
e-control APP User Guide Step1 Download the e-control APP PC/Web download APP Forum e-control Scan QR code to download Page1 A: Scan QR code from the packing B: Visit www.ibroadlink.com using box or the user manual to your mobile browser and tap download and install the APP. Download APP as shown on Page1 above. 4
Step2 Configure the Device Configuration Mode Ensure the Wi-Fi LED is blinking rapidly about 5-6 times per sec Plug into the power outlet SmartONE Connect to Wi-Fi Wi-Fi Router Smart Phone e-control Open e-control APP 5
Step3 Configure the Device Enter the Wi-Fi user name Enter the password * If the configuration is failed,please refer to Page14 6
Step4 Start to experience Function Tap to view sensor alarm history Alarm Status Available Sensors Quick Setup Sensor Status Tap to view the history info/ setup sensor Device Control Panel 7
e-control APP Add Sensor 1 Back Scan Barcode 2 Sensor status 2 Align the barcode on sensor in scanning box. The sensor can be added automatically. Enter serial number Add Add sensor as shown on the page above 8 Please scan QR code, or manually enter serial number
Back Scan Barcode Next vendor name ******company Sensor type Wireless Door Sensor Sensor ID 088888880 Part-arm Enable by default Back Sensor definition Save Name Door sensor Type Zone Attach to Door sensor Living room Door Tap to change senor name Tap to select the location Tap to select the installation site Sensor Info Page Sensor Settings 9
e-control APP IFTTT Style Interaction Users can DIY various ways for smart home control. Devices will operate automatically after setting when the conditions are triggered. IFTTT simply enables you to enjoy the real unattended smart home such as the situation as Turn on the warm lights once the door of your house is opened. If Living room - [Door sensor](open), then [Smart plug] - Desk Lamp (On) ( ) is the condition to be triggered or action to be performed. [ ] is the BroadLink brand or Broadink DNA products. When adding IFTTT, make sure all the sensors added to WLAN should have Internet access, otherwise the IFTTT scene cannot be uploaded to the server and loaded from the sensor. 10
e-control APP IFTTT Settings 1 2 Back IFTTT Save Tap to IFTTT setup IF Sensor& condition Settings Task list Motion Sensor No Person Key Fob SOS Add new Tap to IFTTT Tap to setup Timer Settings 3 SmartPlug zj ON min Delete Delete IFTTT Tap to setup Then Action Settings Alarm Play button 2 Enter IFTTT page as shown above, and setup according to the APP tip, then tap save. (SmartONE supports max 16 groups of IFTTT with 6 conditions and 8 actions for each group) 11
e-control APP General Settings 1 Home General settings 2 Edit device Back Alarm setting Save Create shortcut Delay time settings Delay time settings Lock device Lock device Set the alarm duration Alarm setting Firmware update 3 Door Sensor Motion Sensor Select sensor Edit Device Tap to change the icon and name Lock Device Prevent your devices from being detected and operated by other smartphone users in the same WLAN. Delay time settings Setup the delay time for Full/Part Arm. Select the sensor Select the sensors enabled in Part Arm mode. 12
control Function Scene door Sensor Settings Door opened Shortcut Full-Arm Part Arm Long Press Disarm Cancel What action you want to be performed by this shortcut? Delete Create shortcut Share configuration Cancel Tap to create the shortcut on your desktop Full-Arm Default the situation in which all the sensors will be involved in alarm. Part-Arm Select sensors needed to be involved in alarm on the alarm setting Page (P12). ( Wireless key fob remote can simply setup without Smartphone ) 13 Enter Control page for more operations
Search/Edit Device Configuration Failed Back IFTTT RM Back IFTTT RM RM A1 RM A1 SmartONE 长按 SmartONE Edit name Delete Cance P2 Reset device Press the reset button more than 6 seconds until the Wi-Fi LED is blinking rapidly New device Offline New device added; The device is offline, unable to control, please check your network connection 14 If APP shows the page 2 as above when Wi-Fi light keep flashing slowly, and device configuration failed, please reset device and reconfigure (Repeat Step 3). If the configuration shows other problems, please contact customer service staff for help.
S1 A1 SP 2 e - Control IPC RM Pro More Smart Devices