INDEX 1 NETIC... 2 2 Door/Window detector MINI... 2 3 FOUR sensor... 3 4 Smoke detector... 3 5 Flood detector... 4 6 ILLumination sensor... 4 7 Lamp holder... 5 8 Siren... 5 9 Power meter & switch... 6 10 F1 energy meter... 6 11 F3 energy meter... 7 12 Dimmer... 7 13 Shutter... 8 14 On/Off... 9 15 Double On/Off... 10 16 On/off thermostat... 11 17 Radiator thermostat... 11 18 Thermostat... 12 19 A/C control... 12 20 Repeater... 13 21 IP camera... 13 22 Temperature sensor... 13 23 2M casing SET... 14 24 Wall mounted casing... 14 25 Surface door sensor... 14 26 Built-in door sensor... 15 27 NETIChome mobile ios... 16 28 NETIChome mobile Android... 16
NETIChome NETIChome system is composed of: 1. NETIC 2. Door/Window detector MINI 3. FOUR sensor 4. Smoke detector 5. Flood detector 6. ILLumination sensor 7. Lamp holder 8. Siren 9. Power meter & switch 10. F1 Energy meter 11. F3 Energy meter 12. Dimmer 13. Shutter 14. On/Off 15. Double On/Off 16. On/off thermostat 17. Radiator thermostat 18. Thermostat 19. A/C control 20. Repeater 21. IP camera 22. Temperature sensor 23. 2M casing SET 24. Wall mounted casing 25. Surface door sensor 26. Built-in door sensor Applications: 27. NETIChome mobile ios 28. NETIChome mobile Android NETIChome basic elements
1 NETIC NETIC (Automation Gateway) is used to: configure wireless network, to control switches, dimmers, motion sensors, temperature sensors, and other devices (elements of home automation), support creation of scenes, timers, events and notifications. Type: NETIC Ordering Code: NETIC Through any internet browsing device (PC, tablet, smartphone) allows: home automation control and supervision, video monitoring (IP cameras), energy metering. NETIC support management through any ios and Androide device (with software application NETIChome mobile). Remote home management through web interface is enabled with CLOUD access service. External power supply Input AC 100-240V, 50/60Hz Output DC 12V/2A 4xAA batteries NETIC USB ports: 1, WAN ports:1 Dimensions (HxWxD): 116mm x 95mm x 44mm Package includes: NETIC unit, AA batteries (x4), power adapter, LAN cable. 2 Door/Window detector MINI It is MINI version of Door/Window detector module which detects the opening or closing of a window or door. Type: Door/Window detector MINI Ordering Code: NEWDWDM Power supply: 2xCR2450 3.0V 620mAh Lithium Battery Low battery indication Operation temperature: -10 ~ 40 C Operation humidity: 85%RH max The device is for indoor use only Distance: up to 30m Dimensions (WxHxD): 31mm x 70mm x 11.5mm Weight: 23,6 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 20 Package includes: module, CR2450 batteries (2x), mounting kit. 2
3 FOUR sensor The purpose of FOUR sensor module is to detects the motion of a person and monitor the current illumination, humidity and temperature. It is for indoor/outdoor (under shade area) use. Type: FOUR sensor Ordering Code: NEWFS Power supply: 4x1.5V AAA batteries / 5V via mini USB Low battery indication Motion detection: IR changes, Angle: 360 (ceiling mounted), 120 (wall mounted) Temperature range: -20 ~ 50 C; accuracy: ±1 C Humidity range: 20% 90%; accuracy: ±5% Illumination range: 0 1000LUX The device is for indoor and outdoor use (under shade area). Distance: up to 25m Dimensions: Ø 75mm x 57mm (without bracket) Weight: 118 g Protection Class: IP 42 Package includes: module, AAA batteries (x4), USB Cable. 4 Smoke detector The purpose of Smoke detector module is to detect smoke and sound the alarm. Type: Smoke detector Ordering Code: NEWSD Power supply: 1x9V battery Low battery indication. Operation temperature: 0 ~ 40 C Operation humidity: 85%RH max The device is for indoor use. Distance: up to 30m Dimensions: Ø102mm x 50mm Weight: 259 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 20 Package includes: module, 9V battery. 3
5 Flood detector The purpose of Flood detector module is to detect flood in residential buildings and send a trigger for alarm purposes. Type: Flood detector Ordering Code: NEWFD Power supply: 3x1.5V AA batteries Low battery indication. Operation temperature: -10 ~ 50 C Operation humidity: 85%RH max The device is for indoor use. Distance: up to 30m. Dimensions (WxHxD): 85mm x 85mm x 39mm Weight: 250 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 44 Package includes: module, AA batteries (x3), mounting kit. 6 ILLumination sensor The purpose of Illumination sensor module is to to monitor the current illumination of ambient environment. Type: ILLumination sensor Ordering Code: NEWIS Power supply: 3x1.5V AA batteries Low battery indication. Operation temperature: -10 ~ 50 C Operation humidity: 85%RH max Illumination range: 0 ~ 3000LUX The device is for indoor and outdoor use. Distance: up to 30m. Dimensions (WxHxD): 85mm x 85mm x 40mm Weight: 110 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 44 Package includes: module, AA batteries (x3), mounting kit. 4
7 Lamp holder The purpose of Lamp holder module is to turn light ON /OFF. Type: Lamp holder Ordering Code: NEWLH Power supply: 230VAC/50Hz Maximum load: 100 Watts incandescent, 27 Watts energy saving bulb Operation temperature: 0 ~ 40 C Operation humidity: 85%RH max The device is for indoor use. Distance: up to 30m. Dimensions (WxHxD): 65mm x105mm x 35mm Weight: 150 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 20 8 Siren The purpose of Siren is to warn people in the building by a loud sound and a flashing light (strobe) that an alarm has occurred. Type: Siren Ordering Code: NEWS Power supply: 4xAA batteries Battery life time: 1 year, for safety reason, replace new battery whenever Siren is triggered. Operation temperature: -15 ~ 60 C Visible alarm: yes, flashing light (strobe) Sound level: 105dB Tamper alarm: yes Auto stop: Yes (after 30 seconds) The device is for dry interior locations only Distance: up to 30m. Dimensions (WxHxD): 116mm x 77mm x 40mm Weight: 130 g Package includes: module, 4xAA batteries, mounting kit. 5
9 Power meter & switch This module is a switch plug-in. It switches all kinds of loads. Local operation is possible by pressing the button on the module. Module measures power consumption. Power meter & switch has also integrated function Auto shut off (when overloaded) and After black out remember function. Type: Power meter & switch Ordering Code: NEWPMS Power supply: 230VAC, 50Hz Maximum load: 3000W for resistive load, 1500W for incandescent load or 320W for fluorescent load Overload protection: 3300W Operation temperature: 0 ~ 40 C / 85%RH max Monitoring: -Electrical power load in W -Electric energy consumption in kwh Power monitoring accuracy: P=5~40W, ±3 W P=40~3000W, ± 5% The device is for indoor use only. Distance: up to 30m. Dimensions (WxHxD): 57.7mm x 94.5mm x 76.6mm Weight: 118 g Wireless communication 868,4MHz, EIRP: +2,5 dbm Protection Class: IP 20 10 F1 energy meter The purpose of F1 energy meter is energy consumption metering for single-phase consumers. Type: F1 energy meter Ordering Code: NEWF1EM Power supply: 230VAC 50Hz Measure range of voltage: 200-260V 60A clamp 1% accurancy Operation temperature: -20 ~ 60 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Distance: up to 24m Dimensions (WxHxD): 68mm x 110mm x 35mm Protection Class: IP43 Package includes: module, clamp (x1), mounting kit. 6
11 F3 energy meter The purpose of F3 energy meter is energy consumption metering for three-phase consumers. Type: F3 energy meter Ordering Code: NEWF3EM Power supply: 230VAC 50Hz Measure range of voltage: 200-260V 60A clamp 1% accurancy Operation temperature: -20 ~ 60 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Distance: up to 24m Dimensions (WxHxD): 68mm x 110mm x 35mm Protection Class: IP43 Package includes: module, clamp (x3), mounting kit. 12 Dimmer This module is used for dimming the light or to manage the speed of a fan. The module can be controlled either through a wireless network or through the wall switch. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of light or fan and supports connection of digital temperature sensor. Type: Dimmer Ordering Code: NEWHDA1 Power supply: 110-230VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output: 0,85A / 230VAC Rated load current of DC output: 0,85A / 30VDC Output circuit power of AC output (resistive load): 200W (230VAC)* Output circuit power of DC output (resistive load): 21W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: ±2W Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Weight: 25g Electricity consumption: 0,7W For installation in boxes: Ø 60mm or 2M Switching: MOSFET 7
13 Shutter This module is used to control the motor of blinds, rollers, shades, garage doors, gates, venetian blinds, etc The module can be controlled either through a wireless network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of motor and supports connection of digital temperature sensor. Type: Shutter Ordering Code: NEWHCA1 Power supply: 110-230VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output (resistive load)*: 2 X 4A / 230VAC Rated load current of DC output (resistive load): 2 X 4A / 30VDC Output circuit power of AC output (resistive load): 2 X 920W (230VAC) Output circuit power of DC output (resistive load): 2 X 96W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=0~200W, ±2 W P 200W, ± 3% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Weight: 25g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay (2x) 8
14 On/Off This module is used for switching On or Off the electrical device (e.g. light, fan, etc...). The module can be controlled either through a wireless network or through the wall switch.the module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of electrical device and supports connection of digital temperature sensor. Type: On/Off Ordering Code: NEWHAA1 Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC Rated load current of AC output (resistive load)*: 1x10A / 230VAC Rated load current of DC output (resistive load): 1x10A / 30VDC Output circuit power of AC output (resistive load): 2300W (230VAC) Output circuit power of DC output (resistive load): 240W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -15 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=5~50W, ±3W P 50W, ± 3% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Weight: 25g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay 9
15 Double On/Off This module is used for switching On or Off two electrical devices (e.g. lights, fans, etc...). The module can be controlled either through a wireless network or through the wall switches.the module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of two electrical devices and supports connection of digital temperature sensor. Type: Double On/Off Ordering Code: NEWHBA1 Power supply: 110-230VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output (resistive load)*: 2 X 4A / 230VAC Rated load current of DC output (resistive load): 2 X 4A / 30VDC Output circuit power of AC output (resistive load): 2 X 920W (230VAC) Output circuit power of DC output (resistive load): 2 X 96W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=0~200W, ±2 W P 200W, ± 3% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Weight: 25g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay (2x) 10
16 On/off thermostat The module can be used to directly control an electrical or water floor heating system, electric water heater, hot water pump, electrical radiator, etc... As it is connected directly to either 230VAC or 24VDC, no batteries are required. On/off thermostat replaces big room wall thermostat, because the temperature set point is set through a wireless network. Type: On/off thermostat Ordering Code: NEWHIA1 Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC Rated load current of AC output (resistive load)*: 1x10A / 230VAC Rated load current of DC output (resistive load): 1x10A / 30VDC Output circuit power of AC output (resistive load): 2300W (230VAC) Output circuit power of DC output (resistive load): 240W (24VDC) Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=5-50W, +/-3W; P 50W, +/-3%; Operation temperature: -10 ~ 40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Weight: 25g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay Digital temperature sensor range: -50 ~ 125 C, resolution 0.1 C Digital temperature sensor cable lenght: 1000mm 17 Radiator thermostat The purpose of Radiator thermostat is to control radiator heating valve. Type: Radiator thermostat Ordering Code: NEWRT Power supply: 2x1.5V AA alkaline batteries, class III (SELV) Low battery indication. Operation temperature: 0 ~ 40 C Temperature setpoint range: 4 ~ 28 C Maximum water temperature: 90 C Distance: up to 30m. Dimensions: L: 91mm Ø: 51 (RA) Weight: 177g Protection Class: IP 20 Package includes: module, AA alkaline batteries (x2), adapter. 11
18 Thermostat The purpose of Thermostat is to control heating (valve, pump). It consists of: a battery operated Wall thermostat installed in the room and Relay switch module. Characteristics of Wall thermostat: Type: Thermostat Ordering Code: NEWT Power supply: 2xAAA alkaline batteries Battery life time: app. 2 years Low battery indication. Temperature measurement acccuracy: +/- 0.5 C Hysteresis: +/- 0.5 C Temperature setpoint range: 5 ~ 30 C Temperature actual and sepoint presentation step: 1 C Operation temperature: 0 ~ 40 C Distance: up to 30m. Dimensions (WxHxD): 86mm x 86mm x 36.25mm Protection Class: IP 30 Characteristics of Relay switch module: Power supply: 230V AC 50Hz Operating temperature range: 0 ~ 40 C Contact rating: 1A, 230V AC Distance: up to 30m. Dimensions (WxHxD): 86mm x 86mm x 36.25mm Protection Class: IP 30 Package includes: modules (Wall thermostat and Relay switch), AAA batteries (x2). 19 A/C control The purpose of A/C control is translating wireless commands to AC IR control code. A/C control module has built in temperature sensor which allows Base unit to get the current room temperature. Type: A/C control Ordering Code: NEWAC Power supply: USB Power DC 5V 100mA or 3xAAA dry batteries. Low battery indication. Operation temperature: 0 ~ 40 C RF operating distance: up to 25m IR operating distance: up to 8m line of sight IP learning: max. 23 commands Dimensions: Ø =70mm, T = 18mm (Main unit) Ø =70mm, T = 15.5mm (Battery chassis) Weight: 60 g Protection Class: IP 20 Package includes: module (battery and USB cable not included). 12
20 Repeater The purpose of Repeater is to extend the wireless communication. Repeater increase and improve network distance range. Type: Repeater Ordering Code: NEWREP Power supply: 230VAC 50Hz Operation temperature: 0 ~ 40 C Operation humidity: 85%RH max The device is for indoor use. Distance: up to 30m Dimensions (WxHxD): 44mm x 44mm x 57mm Wireless communication 868,42 MHz, EIRP: -22.0dBm ~ -2.0dBm 21 IP camera The purpose of IP camera is to implement video monitoring in NETIChome system. Video streams coming from the camera are accessable via web and NETIChome mobile application (Android, ios). Type: IP camera Ordering Code: NEWIPC Triple Streaming for MPEG4, Motion-JPEG and mobile device simultaneously. Supports 802.11b/g wireless LAN. Up to 30 frames per second in full VGA resolution. Package includes: camera, antenna, installation CD, power adapter, network cable, mounting kit. 22 Temperature sensor Digital Temperature sensor has 1m cable with connector to connect directly to: Dimmer, Shutter, On/Off, Double On/Off modules. Digital temperature sensor range is from -50 ~ 125 C. The lenght of the cable is 1000mm. Type: Temperature sensor Ordering Code: ZMNHEA1 13
23 2M casing SET Temperature sensor can be installed behind 2M casing SET. SET is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 X mounting frame 2M with claws, 2 X 1M perforated blank cover, 1 X cover plate 2M casing SET is made of PC/ABS material and is available in standard 2M dimesions and Polar white colour. Type: 2M casing SET Ordering Code: ZMNHFA1 24 Wall mounted casing Temperature sensor can be installed inside Wall mounted casing. Wall mounted casing comes in 71mm x 71mm x 71mm dimenssions and is made of ABS material. It is available in White colour. Type: Wall mounted casing Ordering Code: ZMNHGA1 25 Surface door sensor The purpose of the Surface door sensor is to detect, if the door are left open. The sensor comes in three parts. The door mounted part is installed by two screws on the door. The second part, the door frame, is installed on the door frame, this part has 2 connectors for 2 wires. Third part is a cover for connectors. When the door is closed the door mounted part and the door frame should be aligned. Type: Surface door sensor Ordering Code: NEDJAA1 Material: Anti-fire ABS shield Connecting mode: N.C. Rated current: 300(mA) Rated voltage: (VDC) 200 Operating distance: More than 15mm, less than 25mm Rated power: 3W 14
26 Built-in door sensor The purpose of the Built-in door sensor is to detect, if the door are left open. The sensor comes in two parts. The first part is built-in into the door, while the second part, with 2 wires, is inserted into the door frame. When the door is closed the both parts should be aligned. Type: Built-in door sensor Ordering Code: NEDJAA2 Material: Anti-fire ABS shield Connecting mode: N.C. Rated current: 100(mA) Rated voltage : (VDC) 200 Operating distance: More than 15mm, less than 25mm Rated power: 2W Wires length: 150mm 15