Optoelectronics Industry and Technology Development Association

Similar documents
LIGHTING THE PATH TO A BRIGHTER FUTURE

ISO Safety of machinery Laser processing machines Part 1: General safety requirements

ISO INTERNATIONAL STANDARD. Ophthalmic optics and instruments Electro-optical devices for enhancing low vision

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements

ISO INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength

THE LEADING LIGHT SENSORS, TEST AND MEASUREMENT/ OPTICAL MEASUREMENT SYSTEMS JUNE 24 27, 2019, MESSE MÜNCHEN

COSMO INSUTRUMENTS CO.,LTD. AIR LEAK TESTER

ISO INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

SMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice

CANADIAN SOCIETY OF LANDSCAPE ARCHITECTS DRAFT STRATEGIC PLAN 2018_20. Approved by the CSLA Members at the date AGM

CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail

Profile Photonic Sensing Consortium for Safety and Security

This document is a preview generated by EVS

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

CEN/TC 186 ISO/TC 244

DSUF. Activities of the Digital Signage User s Forum. December 13, 2012 DSUF Secretariat

ISO INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

Assessment. Strategic. Environmental. & Land Use Planning in Lebanon. Funding: European Commission LIFE Third Countries Programme.

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

ISO INTERNATIONAL STANDARD

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus

European Green Belt Initiative Example for cross border cooperation

Landscape and Community Development through Cooperation

The 16 th JOINT WORKSHOP HELD IN JAKARTA, BUTON ISLAND, BALI, Indonesia 28 th February to 3 rd March, 2016

The World of Green - AIPH - International experience. Vic Krahn International Association of Horticultural Producers

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests

BSI the UK voice into European and national standards

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

Confused by standards Standards for social alarms

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO/TS TECHNICAL SPECIFICATION

ISO 7491 INTERNATIONAL STANDARD. Dental materials Determination of colour stability. Produits dentaires Détermination de la stabilité de couleur

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

Policy for management and protection of the coast

This document is a preview generated by EVS

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 2: Performance criteria

Mitsubishi Electric launches the Industrial. Internet of Industrial Sewing Machines

ISO INTERNATIONAL STANDARD. Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

This document is a preview generated by EVS

Report on the Environmental Benefits and Costs of Green Roof Technology for the City of Toronto

INTERNATIONAL STANDARD

Integrated urban policies and land management The URBACT Experience Didier Vancutsem

STANDARDS OF INTERNATIONAL CULTURAL AND FINANCIAL INSTITUTIONS FOR CULTURAL HERITAGE PROTECTION AND MANAGEMENT

CANADIAN SOCIETY OF LANDSCAPE ARCHITECTS STRATEGIC PLAN 2012_14

BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

INTERNATIONAL STANDARD

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment

INTERNATIONAL STANDARD

This document is a preview generated by EVS

ISO 6394 INTERNATIONAL STANDARD

UNEP s Role in Promoting Environmentally Sound Management of E-Waste

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

ISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Earth-moving machinery Field of vision of surveillance and rear-view mirrors Part 1: Test methods

Contents. Introduction. Introduction About This Report 1. Sustainability & Strategy. Social Respect for Human Rights and Diversity 15

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding

This is a preview - click here to buy the full publication

ISO Textiles Domestic washing and drying procedures for textile testing

ISO INTERNATIONAL STANDARD. Pipe flanges Part 1: Steel flanges for industrial and general service piping systems

BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

The History and Future of Japan s Design Policy

This document is a preview generated by EVS

Particle Tracking Analysis for particle counting

ISO INTERNATIONAL STANDARD

2014 Event Programs Reviews Introduction of Light plus series of events

ISO 6396 INTERNATIONAL STANDARD. Earth-moving machinery Determination of emission sound pressure level at operator's position Dynamic test conditions

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

Annex D: Project Logframe Matrix

ISO INTERNATIONAL STANDARD

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

This document is a preview generated by EVS

SEVENTH SESSION. (Strasbourg, May 2000) Resolution 98 (2000) 1 on historic towns in Europe

ISO 9050 INTERNATIONAL STANDARD

Summary of the Global Power City Index-2010

ISO INTERNATIONAL STANDARD. Sensory analysis Guidelines for sensory assessment of the colour of products

Paper and board - Determination of grammage (ISO 536:2012)

Kashiwa-no-ha Smart City A New Vision for the Cities of Tomorrow

Global and China Injection Molding Machine Industry Report, Jul. 2012

Annual Technical Report 2014

Ma Dejun Vice chairman of IEC/TC61 WIC 12 Nov 2014 Tokyo, Japan INTERNATIONAL ELECTROTECHNICAL COMMISSION

This document is a preview generated by EVS

This document is a preview generated by EVS

Transcription:

Optoelectronics Industry and Technology Development Association

Optoelectronics Industry and Technology Optoelectronics industry and technology have created new added values in various industrial fields such as optical communications, display and solid-state lighting, optical storage, laser/optical processing, optical energy and sensing/measuring. Further, exploitation of the optoelectronics technologies greatly contributes to realization of safe, secure, affluent and comfortable society by equalizing the quality of life in urban and rural areas, improving the security in cyber and physical space, and overcoming the limitation due to environmental and energy problems. The optoelectronics industry in the world is supported by innovation of optoelectronics technology and continues to expand greatly. Mission In order to meet the high expectations for optoelectronics industry and technology, which will support the society of tomorrow, OITDA actively conducts a wide range of activities, such as research and study, promoting and supporting technology development, and furthering standardization. It also makes active efforts to spread and raise awareness of optoelectronics technology worldwide, through cooperating with optoelectronics industry associations in Europe, the United States and Asia. Research and Study Technology Development Standardization About Us Name : Optoelectronics Industry and Technology Development Association(OITDA) Date of Establishment : July 25, 1980 Fund : 400 million yen Board Member Companies: Fujikura Ltd., Fujitsu Limited, Furukawa Electric Co., Ltd., Hitachi, Ltd., Mitsubishi Electric Corporation, NEC Corporation, Nippon Sheet Glass Co., Ltd., Nippon Telegraph and Telephone Corporation, Oki Electric Industry Co., Ltd., Panasonic Corporation, Sumitomo Electric Industries, Ltd., Toshiba Corporation 2

Research and Study Optoelectronics Technology Roadmaps We formulate Optoelectronics Technology Roadmaps in order to identify the specific needs for optoelectronics technology in relevant fields (e.g. information-processing photonics, optical user interface, optical communication, optical processing and measurement), and clarify the direction and schedule for research and technology development to meet those needs. Optoelectronics Technology Trends We investigate the current status and trends of optoelectronics technologies at home and abroad from a variety of perspectives and on a continuous basis. We aim to use the findings as guidelines for the future direction of research and development. Optoelectronics Industry Trends We conduct a survey every year in order to analyze the present scale of total shipment and domestic production in the optoelectronics industry for indicating the direction of Japanese optoelectronics industries. Industry-Academia-Government Cooperation Study groups established in OITDA work toward strengthening cooperation between industry, academia and government in various fields of optoelectronics. Study group members exchange the latest information and opinions on the relevant technologies available at home and abroad. Technology Development R&D Project The optoelectronics industry should conduct research and development more vigorously in order to maintain their lead in this field. We plan and manage total research and development projects, which cover every activities from the discovery of seeds of potential optoelectronics technology through to development for commercialization, drawing together the efforts of the industrial, academic and governmental sectors. 3

Standardization Optoelectronics Industry and Technology Standardization Society It is critically important to take timely action in responding to standardization. With this in mind, the Optoelectronics Industry and Technology Standardization Society actively engages in creating domestic standards as well as international standards. Japanese Standardization Since 1981, we have been contributing to the promotion of standardization by drafting Japanese Industrial Standards (JIS) related to optoelectronics. More than 300 JIS drafts that we laid down have been adopted as official standards. We also develop OITDA standards to promote international standardization. International Standardization ISO/IEC We have established national committees in Japan that correspond to the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). We send experts to ISO/TC 172/SC 9 (Laser and electro-optical systems) and IEC/TC 76 (Optical radiation safety and laser equipment). We fulfill our duties through the activities of these committees, by submitting drafts of international standards and holding international conferences in Japan. Awards, Education and Disseminations Awards Awarding the Kenjiro Sakurai Memorial Prize to individuals and groups who have made significant contributions to the development of optoelectronics industrial technology. This prize was established as a memorial to the former executive director of OITDA, Dr. Kenjiro Sakurai, who played a major role in developing the optoelectronics industry. Education Laser Safety School: Providing educational programs on laser safety for people engaged in handling laser equipment, by inviting expert in the field as lecturers. Examination for Laser Equipment Engineers: Assessing the laser safety knowledge required for laser equipment engineers as well as safety managers and safety engineers; those who have passed the examination are registered at OITDA. Technical advisor institution: Providing the technical support necessary for starting new businesses in the field of optoelectronics. Disseminations Holding optoelectronics symposiums, monthly seminars and various other forums. Providing information on activities of OITDA by publishing Annual Technical Report and distributing OITDA WEB for the general public. 4

interopto interopto is an international exhibition sponsored by OITDA, wherein remarkable new optoelectronics technology as well as laser, photonics and optoelectronics device products are displayed. Through this event, OITDA provides participants with the opportunity to collect information, exchange technologies and spread their corporate images. OITDA also holds seminars for participants in interopto. OITDA supports ventures and small/medium enterprises to exhibit in interopto and present at seminars. 5

International Cooperation IOA International Optoelectronics Association International Optoelectronics Association (IOA) is a voluntary and informal coalition of international optoelectronics associations which have corporate membership and represent the voice of industry to the national government in each country. The members exchange the information on market trends, technology roadmaps/studies of OE/Photonics industry and activity of each organization. SOA OptecNet EPIC Swissphotonics KAPID OITDA PIDA OIDA CPIC Canada EU Korea Germany Japan U.S.A. Taiwan Scotland Switzerland CPIC Canadian Photonic Industry Consortium http://photonscanada.ca/en/ EPIC European Photonics Industry Consortium http://www.epic-assoc.com/ KAPID Korea Association for Photonics Industry Development http://www.kapid.org/english/ OptecNet https://optecnet.de/en/ OITDA Optoelectronics Industry and Technology Development Association http://www.oitda.or.jp/index-e.html OIDA OSA Industry Development Associates https://www.osa.org/en-us/home/ PIDA Photonics Industry and Technology Development Association http://www.pida.org.tw/usub/en/index.asp SOA Scottish Optoelectronics Association https://optoelectronics.org.uk/ Swissphotonics https://www.swissphotonics.net/home 6

Optoelectronics Industry and Technology Development Association

Optoelectronics Industry and Technology Development Association Plaza Edogawabashi Police Box Shin-Mejiro Street Edogawabashi Building MUFJ Bank Mejiro Street Edogawabashi Street To Ikebukuro thru Gokokuji Kanda River Metropolitan Expressway Route 5 To Yurakucho thru Iidabashi Mejiro Street Exit No.2 Mizuho Bank Tokyo Metro Yurakucho-Line Edogawabashi Station (Y12) Exit No.3 Sumitomo Edogawabashi Ekimae Building 7th Floor OITDA 1-20-10 Sekiguchi, Bunkyo, Tokyo 112-0014 Japan TEL +81-3-5225-6431 FAX +81-3-5225-6435 WEB http://www.oitda.or.jp/index-e.html