Portable Vertical Air-Conditioning and Heating Systems Specifications for 10 Ton Units 208 230 volt 7 1
77 77 77 33 Front Side Back 77 71 / 77 Front 33 Side 2
Cabinet Features: Heating and Cooling Data: Heavy Duty Welded Steel Construction Bolt on Panel Design with Handle Exterior Panels and Frame Powder-Coated Side Tent Clamp Tethers Stainless Steel Hardware Cooling Capacity Heating Capacity Electrical Features: Single Speed Blower Motor 132,000 BTUs 68,240 BTUs 6" diameter heavy duty casters Duct Adaptors Optional Condensate Pump Optional Physical Data: Weight 1,297 lb Depth 33" Length 59" Daisy Chain Cam-Lock Connections Individual Breakers on All Loads Hour Meter 15 KVA Transformer Available as an Option 120 Volt Convenience Outlet Available as an Option Electrical Data: 230 volt / 60 Hertz / 3 Phase Height 71" / 77" on wheels Cooling FLA 33 amps Refrigeration Features: Refrigerant 410A Suction Valves Hot Gas By-Pass Valve Heating FLA MOP Blower Data: Single Speed 52 amps 65 amps Compressor Data Bitzer 10 ton Scroll Compressor RotoLock Connection Single Speed CFM 3,062 Motor: Baldor 2-1/2 HP Heating Coil Data High Capacity Coil Style Custom Designed 20 kw 3
4
10 Ton wisperkool Specifications The unit s structural frame is fabricated from 11 and 14 gauge steel. Access doors are fabricated from 14 gauge galvanized steel. Access doors are insulated for sound and condensate control. Other surfaces that contact condensate are insulated with 1" insulation. All frame surfaces are protected with an ATP high performance epoxy anti-chip powder coat primer. All frame surfaces are then powder coated with white TGIC weather resistant polyester on all interior and exterior surfaces. Additional surface sealer on the drain pan, condenser fan shelf and the floor of the compressor compartment to fight against rust, corrosion, salt, dampness and extreme process temperatures. Aluminum condenser guards and supply grill. Deflector shield over the top of the electrical panel for moisture protection. One 10 ton Bitzer scroll compressor with 132,000 BTUs per hour. Compressor equipped with RotoLock Adapters Hot gas bypass valve installed. Bitzer compressors use R410-A refrigerant. One custom built multi-circuit raised lance fin evaporator coil. One custom built multi-circuit raised lance fin condenser coil. Twin direct drive fans that deliver 3,062 CFM. Two ⅟₂ HP blower motors. One 2 HP condenser fan motor. One 26" diameter condenser fan. One 20 kw electric heater. Tubular skid base with fork pockets primed and powder coated. 6" diameter heavy duty casters Unit voltage 208-230/3/60. Two 16" supply air grilles with adjustable fins vertical and horizontal. Aluminum mesh return grill with 2" washable filters. Eight camlock lock fittings for external connection with a daisy chain option Tent clamps on sides of the unit. Unit dimensions 33" wide, 59" long, and 71" tall powder coated. Optional duct kits for flexible ducting. Optional convenience outlets with transformer. Optional easy connect remote thermostat. Optional Condensate Pump. Optional smoke detector. Optional condensate pump. 5