Smart Anytime, Safe Anywhere Z-Wave Accessory Catalogue The Power of Home Control in Your Hands
Z-Wave Accessory Catalogue 2015 Contents Power Switches Power Meter Switches Dimmer Switches Light Switches Light Sensors Thermostats and Temperature Sensors Shutter Controls Relay Controllers and DI/DO Modules Repeaters and IR Extenders Remote Controls Door Contacts Motion Sensors Smoke and Heat Detectors Environmental Sensors Sirens Remote Keypads Others 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18
Climax s Complete Range of Z-Wave Accessories Working Together for Your Home Z-Wave makes regular household products smart and places the power of home control and monitoring in your hands. Climax s Z-Wave accessories provide greater safety, comfort and convenience for residential and light commercial environments. Climax s Z-Wave Home Control product line offers a comprehensive range of Z-Wave accessories for control, monitoring, and status operations, including home automation, lighting control, environmental sensors, energy management, and emergency monitoring. Climax s Z-Wave accessories adopt the Z-Wave open standard, which ensures interoperability with other manufacturers Z-Wave products. This allows installers and homeowners to easily integrate Climax s Z-Wave applications into new or existing Z-Wave networks. Climax s mature wireless RF-based communication technology and strict quality manufacturing bring affordable, reliable, and easy-to-use smart products to everyone in every aspect of daily life.
Power Switches PSS-29ZW Power Switch Series Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Power supply: 110-230V, 50/60Hz Maximum load: 1760W 16A/110V or 3680W 16A/230V Capability to double as a Z-Wave repeater German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available PRS2-ZW Power Relay Switch Series Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: 51mm x 48mm x 20mm) Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Power supply: 110-230V, 50/60Hz Maximum load: 1100W 10A/110V or 2300W 10A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches 1
Power Meter Switches PSM-29ZW Power Meter Switch Series Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Built-in power meter measures and reports energy consumption Power supply: 110-230V, 50/60Hz Maximum load: 1760W 16A/110V or 3680W 16A/230V Capability to double as a Z-Wave repeater German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available PRM2-ZW Power Meter plus Relay Switch Series Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: 51mm x 48mm x 20mm) Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Built-in power meter measures and reports energy consumption Power supply: 110-230V, 50/60Hz Maximum load: 1100W 10A/110V or 2300W 10A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches PSM-DIN2/3-ZW DIN Rail Power Meter Switch Series Enables the user to remotely turn on/off electronic appliances (load type: electronic appliances) Measures, monitors, and reports the energy consumption of the connected appliances Can be installed on a power distribution unit (installable on a DIN rail) One input connector and one output connector Power supply: 110V and 230V Maximum load: 1760W 16A/110V or 3680W 16A/230V (PSM-DIN2-ZW) 3300W 30A/110V or 6900W 30A/230V (PSM-DIN3-ZW) PSM-DIN2-ZW PSM-DIN3-ZW 2
Dimmer Switches PSD-29ZW Dimmer Switch Series Enables the user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Power supply: 110-230V, 50/60Hz Maximum load: 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave repeater German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available PRD2-ZW Power Relay Switch with Dimmer Series Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: 51mm x 48mm x 20mm) Enables the user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Power supply: 110-230V, 50/60Hz Maximum load: 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches PSMD-29ZW Power Meter plus Dimmer Switch Series Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Built-in power meter measures and reports energy consumption Power supply: 110-230V, 50/60Hz Maximum load: 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave repeater German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available PRMD2-ZW Power Meter with Relay and Dimmer Switch Series Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: 51mm x 48mm x 20mm) Enables the user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Built-in power meter measures and reports energy consumption Power supply: 110-230V, 50/60Hz Maximum load: 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches 3
Light Switches LS-1A/E-G-ZW AC-Powered Light Switch Series Controls the on/off status of permanently installed lights Provides remote on/off control via a ZigBee network and manual on/off control via its rocker switch Options of two-way (one switch and one load) and three-way (two switches and one load) switches Power supply: 110-230V, 50/60Hz Maximum load: 5A Connects to neutral, traveler, load, and line wires LED indicates the switch location in a dark room May be used in a new installation or replace an existing wall switch North American model European model LS-1A/E-B-ZW Battery-Powered Light Switch Series Controls the on/off status of permanently installed lights Provides remote on/off control via a ZigBee network and manual on/off control via its rocker switch Two-way switch (one switch and one load) Battery type: CR123A alkaline battery x 1 Maximum load: 5A Connects to load and line wires LED indicates the switch location in a dark room May be used in a new installation or replace an existing wall switch North American model European model LS-1A/E-3 Ways-ZW Light Switch Series Consists of a master switch (LS-1A/E-G-ZW) and a slave switch (LS-1A/E-S-ZW) for 3-way control Manages the on/off status of permanently installed lights Provides remote on/off control via a ZigBee network and manual on/off control via its rocker switch Power supply: 110-230V, 50/60Hz Maximum load: 5A The master switch connects to neutral, traveler, load, and line wires The slave switch sends on/off signals to the master switch LED indicates the switch location in a dark room North American model European model 4
Light Sensors LM-1ZW Ambient Light Sensor Converts light intensity into digital signals for automatic appliance control Monitors visible light sources Creates ambient lighting Combines photodiodes and an analog-to-digital converter for light measurements Emulates the sensitivity of the human eye LMHT-1ZW Light Detector with Temperature and Humidity Sensor Provides automatic appliance control according to lighting, temperature, and humidity conditions Monitors visible light sources Creates ambient lighting Combines photodiodes and an analog-to-digital converter for light measurements Emulates the sensitivity of the human eye Built-in temperature and humidity sensor 5
Thermostats and Temperature Sensors TMST-2ZW Thermostat Automatic control of air conditioning and heating systems User-friendly interface with four-button design for easy operation LCD displays temperature, time, day of the week, heating/cooling/auto/fan mode, away mode icon, and Z-Wave network connectivity Easy switch between degrees Celsius and Fahrenheit Indoor air quality support (humidification, dehumidification, and ventilation) Wiring connections: Y1, Y2, G, OB, RH, RC, C, W1, and W2 terminals Power supply: AC 24V, 50/60Hz Backup battery: Rechargeable CR2032 battery x 1 TRV-1ZW Thermostatic Radiator Valve Automatic on/off control of a radiator valve according to temperature settings Regulates room temperature by changing the flow of hot water to a radiator LCD shows temperature and time Easy switch between degrees Celsius and Fahrenheit Conforms with M30 x 1.5 connection Manually programmable set points Set point range: 10 C~30 C RS-23ZW Temperature and Humidity Sensor Detects temperatures from -10 C to 50 C and humidity from 0% to 100% RH Reports collected data every 10 minutes or when temperature fluctuates more than +/-2 C or humidity more than 10% RH Calculator converts between Fahrenheit and Celsius degrees LCD shows current temperature and humidity levels High stability and sensitivity TS-9ZW Temperature Sensor Detects temperature from -10 C to 50 C Reports temperature to the control panel at programmable regular intervals Powered by a lithium battery for easy installation LED serves as a transmission status indicator 6
Shutter Controls SCM-1ZW Roller Shutter Control (for Motorized Shutters) Controls the motors of roller shutters Automatically or remotely rolls up/down shutters Two local switches for manual control of roller shutters Two power inputs and two motor outputs Power supply: 230V, 50/60Hz Maximum load: 920W 4A SCL-1ZW Roller Shutter Control (for Shutters with Control Units) Connects to the control units of motor-driven roller shutters Automatically or remotely rolls up/down or stops roller shutters Three local switches for manual control of roller shutters One SPDT relay contact and one dry contact Uses internal or external power supply External power supply and current: 5V and 25mA Maximum load: 0.125W 7
Relay Controllers and DI/DO Modules PRL-1ZW Relay Controller Provides convenient opening and closing of home facilities Automates any device controllable by an SPDT relay One relay contact and one dry contact Simplifies wiring efforts Power supply: 5V DC (PRL-1ZW-5V) or 12~24V DC (PRL-1ZW-12V/24V) Power usage: ~300mA fully active Optional AC-powered model XE-1ZW DI/DO Module Integrates wired devices into Z-Wave networks Saves wiring efforts Improves process efficiency One input point (dry contact) One output point Rated load voltage/current: 30VDC/1A, 125VAC/0.3A 8
Repeaters and IR Extenders RM-23B-ZW AC-Powered Repeater Series Extends a system s wireless communications range Extends a network into hard-to-reach areas Built-in temperature sensor (RMT-23B-ZW only) Plugs into a standard power outlet for easy installation Battery backup UPIC-3ZW IR Extender for Air Conditioners Provides remote on/off control of air conditioners through infrared rays Works with a home automation system to turn on/off air conditioning according to custom schedules UPIC-5ZW IR Extender for Home Appliances Provides remote on/off control of five home appliances through infrared rays Works with a home automation system to turn on/off air conditioning according to custom schedules 6 Led (s) for 360-degree coverage 9
Remote Controls RC-15ZW Remote Control Four buttons to arm, disarm, partially arm, and activate your security system LED serves as a transmission indicator Long-life lithium battery LDC-15ZW Lighting and Dimmer Remote Control Remotely turns on/off a light and adjusts its brightness levels Works with a smart plug, smart relay, or dimmer switch for lighting control LED serves as a transmission indicator Long-life lithium battery LC-15ZW Remote Control for Home Appliances Remotely turns on/off four home appliances Works with smart plugs and relays for appliance control LED serves as a transmission indicator Long-life lithium battery RC-16ZW Remote Control Installed Four buttons window to arm, or disarm, door frames partially to arm, detect and intruder activate attacks your security system Four Sliding selectable cover design sensitivity prevents levels unintended activation Built-in LED serves accelerometer as a transmission sensor indicator Integral Long-life door lithium contact battery Built-in reed switch Compatible with other manufacturers ZigBee products 10
Door Contacts DC-16SL ZW Door Contact Monitors the opening/closing of a door or window Powered by a pre-inserted lithium battery Long battery life Built-in reed switch Tamper protection Sleek and slim DC-15ZW Door Contact Powered by a pre-inserted lithium battery for easy installation Mounted on door or window frames Extension terminals for connection to wired devices Doubles as a universal transmitter Tamper protection DCSS-18ZW Door Contact with Shock Sensor Two modes of detection in one sensor Detects shocks produced by forced entries Monitors the openings/closings of doors/windows Four adjustable sensitivity levels Two tamper switches for sabotage detection 11
Motion Sensors IR-9ZW Motion Sensor Powered by a pre-inserted lithium battery for easy installation Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms Detection range: 12 meters over a 110 angle Automatic power saving mechanism Temperature compensated sensitivity control IRP-9ZW Pet-Immune Motion Sensor Pet immunity up to 27kg (59lbs) Powered by a pre-inserted lithium battery for easy installation Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms Detection range: 12 meters over a 110 angle Automatic power saving mechanism Temperature compensated sensitivity control IR-16ZW Motion Sensor Powered by a pre-inserted lithium battery for easy installation Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms Two selectable sensitivity levels Detection range: 12 meters over a 110 angle Automatic power saving mechanism Temperature compensated sensitivity control IRP-16ZW Pet-Immune Motion Sensor Pet immunity up to 27kg (59lbs) Powered by a pre-inserted lithium battery for easy installation Microprocessor-controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms Two selectable sensitivity levels Detection range: 12 meters over a 110 angle Automatic power saving mechanism Temperature compensated sensitivity control 12
Smoke and Heat Detectors SD-8ZW-EL Smoke Detector Photoelectric sensor detects smoke Auto-calibration to readjust its detection threshold value Randomized supervisory signals check system integrity Test buttons for self-tests/diagnoses Silence function temporarily quiets an alarm for 10 minutes Siren output measures 95dB at one meter EN 54-7 and EN 14604 certified SD-8SCZW Smoke Detector Wirelessly interconnected to sound warning along with other sensors when one detector senses smoke and triggers an alarm Auto-calibration to readjust its detection threshold value Built-in siren raises audible alerts Photoelectric sensor detects smoke from any source Sends alarm, maintenance and battery condition messages to the control panel Siren output measures 95dB at one meter EN 54-7 and EN 14604 certified SDH-8ZW-EL Smoke and Heat Detector Photoelectric sensor detects smoke Auto-calibration to readjust its detection threshold value Built-in heat detector Randomized supervisory signals check system integrity Low battery detection Test buttons for self-tests/diagnoses Siren output measures 95dB at one meter SD-16ZW Smoke Detector Reflective photoelectric sensor to detect smoke from any source Auto-calibration to readjust its detection threshold value Sends alarm, maintenance, and battery condition messages to the control panel Test button for self-tests/diagnoses Low battery detection Siren output measures 85dB at 3 meters Compliant with UL 217 and FCC requirements 13
Power Switches Smoke and Heat Detectors SDH-16ZW Smoke and PSS-29ZW Heat Detector Power Switch Series Reflective photoelectric sensor to Enables detect smoke the user from to any remotely source turn on/off an electronic appliance (load type: electronic appliances) Auto-calibration to readjust its detection Power threshold supply: 110-230V, value 50/60Hz Built-in heat detector Maximum load: 1760W 16A/110V or 3680W 16A/230V Sends alarm, maintenance, and battery Capability condition to double messages as a Z-Wave to the control repeater panel Test button for self-tests/diagnoses Low battery detection German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available Siren output measures 85dB at 3 meters SDT-16ZW Smoke Detector PRS2-ZW with Power Temperature Relay Switch Sensor Series Reflective photoelectric sensor to Connected detect smoke directly from to any power source cables and installed in a ceiling or inside a wall socket (dimensions: Auto-calibration to readjust its detection 51mm x threshold 48mm x value 20mm) Built-in temperature sensor Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Sends alarm, maintenance, and battery Power condition supply: 110-230V, messages 50/60Hz to the control panel Test button for self-tests/diagnoses Maximum load: 1100W 10A/110V or 2300W 10A/230V Low battery detection Capability to double as a Z-Wave repeater Siren output measures 85dB at 3 Long meters communications range Extension terminals for connection to external switches HD-9ZW Heat Detector Reports an alarm to the control panel when the temperature rises above 57 C or surges by 8.3 C or more degrees per minute Siren output measures 95dB at one meter 1 14
Environmental Sensors Power Meter Switches PSM-29ZW Power Meter WS-15ZW Switch Water SeriesSensor Enables the user to remotely turn Mounted on/off an electronic the wall appliance or deployed (load on type: the ground electronic appliances) Built-in power meter measures and Detects reports leaks/floods energy consumption using an expandable water-sensing probe cable or water-sensing pins Power supply: 110-230V, 50/60Hz Increases detection range by connecting to an optional extension cable with one or multiple Maximum load: 1760W 16A/110V water-sensing or 3680W 16A/230V probes Capability to double as a Z-Wave Generates repeater a 95-decibel alarm siren when water is detected Long battery life German, French, Danish, American, Transmits Swiss, Chilean, alarm, supervisory, and Peruvian and plugs low battery available signals to the control panel Low battery chirp alert PRM2-ZW Power Meter CO-8ZW plus Relay Carbon Switch Monoxide SeriesDetector Connected directly to power cables Sensitivity and installed levels in meet a ceiling EN 50291 or inside requirements a wall socket (dimensions: 51mm x 48mm x 20mm) Capable of detecting carbon monoxide levels as low as 30 ppm Enables the user to remotely turn Electrochemical on/off an electronic sensing appliance technology (load type: electronic appliances) Built-in power meter measures and Built-in reports siren energy raises consumption audible alerts Power supply: 110-230V, 50/60Hz Triple-color LEDs display status Maximum load: 1100W 10A/110V or 2300W 10A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches PSM-DIN2/3-ZW DIN Rail Power Meter Switch Series Enables the user to remotely turn on/off electronic appliances (load type: electronic appliances) Measures, monitors, and reports the energy consumption of the connected appliances Can be installed on a power distribution unit (installable on a DIN rail) One input connector and one output connector Power supply: 110V and 230V Maximum load: 1760W 16A/110V or 3680W 16A/230V (PSM-DIN2-ZW) 3300W 30A/110V or 6900W 30A/230V (PSM-DIN3-ZW) PSM-DIN2-ZW PSM-DIN3-ZW 15 2
Dimmer Switches Sirens SRAC-23ZW AC-Powered PSD-29ZW Indoor Dimmer Siren Series Switch Series AC-powered Enables the user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Plugs into any standard power outlet Power for supply: simple 110-230V, installation50/60hz Rechargeable battery backup (SRAC-23B-ZW Maximum load: only) 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave Capability repeater to double as a Z-Wave repeater Receives signals from the control Long panel communications to activate the alarm range sound or to emit entry/exit delay beeps Transmits AC power failure, low German, battery and French, supervisory Danish, signals American, Swiss, Chilean, and Peruvian plugs available BX-15ZW Outdoor Bell PRD2-ZW Box Power Relay Switch with Dimmer Series Siren output level: 104dB at 1 meter Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: Attractive design and high-powered 51mm strobe x 48mm light (choice x 20mm) of red or blue lens) IP43 waterproof and UV resistant Enables housingthe user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Unique alarm sounds for fire and Power burglary supply: 110-230V, 50/60Hz Squawk notifications of arming, disarming, Maximum load: and low 275W battery 2.5A/110V status or 575W 2.5A/230V Cover tamper protection prevents Capability unauthorized to double removal as a and Z-Wave vandalism repeater Extension terminals for connection to external switches SR-15ZW Indoor Siren PSMD-29ZW Power Meter plus Dimmer Switch Series Siren output level: 104dB at 1 meter Enables the user to remotely turn on/off an electronic appliance (load type: electronic appliances) Different alarm sounds for fire and Built-in intrusion power meter measures and reports energy consumption Receives signals from the control Power panel supply: to emit 110-230V, entry and exit 50/60Hz delay beeps Transmits low battery and supervisory Maximum signals load: 275W 2.5A/110V or 575W 2.5A/230V Cover tamper protection prevents Capability unauthorized to double removal as a Z-Wave repeater German, French, Danish, American, Swiss, Chilean, and Peruvian plugs available PRMD2-ZW Power Meter with Relay and Dimmer Switch Series Connected directly to power cables and installed in a ceiling or inside a wall socket (dimensions: 51mm x 48mm x 20mm) Enables the user to remotely dim or turn on/off an incandescent light (load type: incandescent lamps) Built-in power meter measures and reports energy consumption Power supply: 110-230V, 50/60Hz Maximum load: 275W 2.5A/110V or 575W 2.5A/230V Capability to double as a Z-Wave repeater Extension terminals for connection to external switches 3 16
Remote Keypads Light Switches LS-1A/E-G-ZW AC-Powered KP-23ZW Light Remote Switch Keypad Series Controls the on/off status of permanently 16-button installed backlit lights keypad for easy use at nighttime Provides remote on/off control via Consumes a ZigBee network power only and when manual in operation on/off control via its rocker switch Options of two-way (one switch and Low one battery load) detection and three-way (two switches and one load) switches Power supply: 110-230V, 50/60Hz Tamper protection Maximum load: 5A Connects to neutral, traveler, load, and line wires LED indicates the switch location in a dark room May be used in a new installation or replace an existing wall switch North American model European model LS-1A/E-B-ZW Battery-Powered KP-29ZW Remote Light Switch Keypad Series Controls the on/off status of permanently Built-in sensor installed automatically lights detects the approach of the user Provides remote on/off control via Touchpad a ZigBee automatically network and manual turns backlit on/off for control operation via its when rocker the switch user comes within 30-50 cm of Two-way switch (one switch and the one keypad load) Battery type: CR123A alkaline battery Keypad x 1and LCD display illuminated by white backlight Maximum load: 5A Event logs, fault reports and system status shown on the 32-character LCD display North American European model Connects to load and line wires Emits entry/exit delay beeps model LED indicates the switch location in a dark room May be used in a new installation or replace an existing wall switch LS-1A/E-3 Ways-ZW KPT-29ZW Light Switch Remote SeriesKeypad with Tag Reader Consists of a master switch (LS-1A/E-G-ZW) Built-in sensor and automatically a slave switch detects (LS-1A/E-S-ZW) the approach for of 3-way the user control Manages the on/off status of permanently Touchpad installed automatically lights turns backlit for operation when the user comes within 30-50 cm of Provides remote on/off control via the a ZigBee keypadnetwork and manual on/off control via its rocker switch Power supply: 110-230V, 50/60Hz Integrates six proximity or NFC tags North American model Maximum load: 5A Keypad and LCD display illuminated by white backlight The master switch connects to neutral, Event traveler, logs, fault load, reports and and line system wires status shown on the 32-character LCD display The slave switch sends on/off signals Emits to entry/exit the master delay switch beeps LED indicates the switch location in a dark room European model 17 4
Light Sensors Others PB-15ZW Panic Button LM-1ZW Ambient Light Sensor Big red button for quick identification Converts and activation light intensity into digital signals for automatic appliance control Long battery life Monitors visible light sources LED indicates the transmission of Creates alarm signals ambient lighting IPX4 water resistant rating Combines photodiodes and an analog-to-digital converter for light measurements Emulates the sensitivity of the human eye UT-15ZW Universal Transmitter LMHT-1ZW Light Detector with Temperature and Humidity Sensor One digital input Provides automatic appliance control according to lighting, temperature, and humidity conditions Connects to a wired device such Monitors as a door visible contact, light motion sources sensor, smoke detector or panic button Creates ambient lighting Detects the activation of the connected Combines wired photodiodes device and and transmits analog-to-digital the device s alarm converter signals for light measurements to the control panel Emulates the sensitivity of the human eye Built-in temperature and humidity sensor SSL-1ZW Status Display Displays the armed, home, and alarm modes of a security system through LED indicators Two LEDs: One green and one red LED IPX4 waterproof standard WCS-1ZW Wireless Wall-Mounted Switch for Appliance Control Wireless wall-mounted switch transmitter Flat back allows the switch to be easily mounted anywhere Controls lights and home appliances Arms and disarms security systems Works with smart plugs and relays North American model European model 5 18
Thermostats and Temperature Sensors TMST-2ZW Thermostat Automatic control of air conditioning and heating systems User-friendly interface with four-button design for easy operation LCD displays temperature, time, day of the week, heating/cooling/auto/fan mode, away mode icon, and ZigBee network connectivity Easy switch between degrees Celsius and Fahrenheit Indoor air quality support (humidification, dehumidification, and ventilation) Wiring connections: Y1, Y2, G, OB, RH, RC, C, W1, and W2 terminals Power supply: AC 24V, 50/60Hz Backup battery: Rechargeable CR2032 battery x 1 TRV-1ZW Thermostatic Radiator Valve Automatic on/off control of a radiator valve according to temperature settings Regulates room temperature by changing the flow of hot water to a radiator LCD shows temperature and time Easy switch between degrees Celsius and Fahrenheit Conforms with M30 x 1.5 connection Manually programmable set points Set point range: 10 C~30 C RS-23ZW Temperature and Humidity Sensor Detects temperatures from -10 C to 50 C and humidity from 0% to 100% RH Reports collected data every 10 minutes or when temperature fluctuates more than +/-2 C or humidity more than 10% RH Calculator converts between Fahrenheit and Celsius degrees LCD shows current temperature and humidity levels High stability and sensitivity Climax Technology Co., Ltd. Website: http://www.climax.com.tw Email: sales@climax.com.tw Copyright 2014 Climax Technology Co., Ltd. All Rights Reserved. Mar 02, 2015 TS-9ZW Temperature Sensor Detects temperature from -10 C to 50 C Reports temperature to the control panel at programmable regular intervals Powered by a lithium battery for easy installation LED serves as a transmission status indicator 6