Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Register issued on : 2013-06-07 A list of subsectors can be found at the end of this document.
Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector A : SERVICES Register issued on : 2013-06-07
Subsector A04: TRANSPORTATION SERVICES Page 3 Subsector : A04 Registration Date : 2013-05-28 SNV Draft Issue Date : 2013-05-27 Switzerland Latest Date for Comments : 2013-07-05 Project ID : CH130012/0001 Draft for public enquiry 03.220.01 SN 671001 Public transport and rail freight Basic Standard and Glossary REV/AMD SN 671001 (2006) Subsector A06: BUILDING AND CONSTRUCTION SERVICES Subsector : A06 Registration Date : 2013-05-14 SIS Draft Issue Date : 2013-05-13 Sweden Latest Date for Comments : 2013-07-13 Project ID : 00825630/0001 Project Established 13.060.30 825630 Small wastewater systems for up to 50 PT - Microorganism reduction units This standard specifies requirements, test methods, marking and evaluation of performance for a microorganism reduction process for small scale domestic wastewater treatment with or without WC. The process can be integrated in a product according to SS-EN 12566-3, -6 and -7, and filterbeds, or as a stand-alone product after such units. Subsector : A06 Registration Date : 2013-05-30 SNV Draft Issue Date : 2013-05-28 Switzerland Latest Date for Comments : 2013-07-04 Project ID : CH130013/0001 Draft for public enquiry 91.010.20 SIA 126 Price changes due to inflation in planning services: Method using sliding scale price formula Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : 2013-05-22 TSE Turkey Project ID : tst12817/0001 Project Established 03.080.30, 29.130.01
Authorized services for electric panels -Rules This standard includes rules for operating, physical characteristics, managership, technical equipment, personnel specifications and certification of Competent services for electric panels. Page 4 Subsector A99: UNDETERMINED Subsector : A99 Registration Date : 2013-05-27 UNI Italy Project ID : 98000240/0001 Project Established 03.080.30 U98000240 Determination of the market value of properties The norm is aimed to defining the criteria for the estimation of market value of the properties based on the definition provided by the Directive 2006/48/EC of the European Parliament and of the Council, implemented by the Law of 23 February 2007, n. 15 (published in the Official Gazette no. 46 of 24 February 2007), which specifies that «Market value» means the estimated amount for which the property should exchange on the date of valuation between a willing buyer and a willing seller in an arm's-length transaction after proper marketing wherein the parties had each acted knowledgeably, prudently and without compulsion. The market value shall be documented in a transparent and clear manner. Subsector : A99 Registration Date : 2013-05-27 UNI Italy Project ID : 98000250/0001 Project Established 03.080.30 U98000250 Property valuer - Definition of the requirements of knowledge, skills and competence The norm is aimed to defining the criteria for the requirements of knowledge, skills and competence of the property valuer Subsector : A99 Registration Date : 2013-05-27 AFNOR France Project ID : FA182734/0001 Project Established PR XP X50-831-2 Beauty and wellness treatments - Part 2: Specific requirements on the quality of service for nail design and prosthetic care
Page 5 Subsector : A99 Registration Date : 2013-05-27 AFNOR France Project ID : FA182735/0001 Project Established PR XP X50-831-3 Beauty and wellness treatments - Part 3 : Specific requirements on the quality of service for eyelash care and design Subsector : A99 Registration Date : 2013-05-17 TSE Turkey Project ID : tst13346/0001 Project Established 03.080.10 Work Places General Rules This standard includes the general rules for structural characteristics, management, storage and personnel characteristics of work places. ** End of Sector **
Information procedure Page 6 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2013-06-07
Subsector B01: FIRE PROTECTION Page 7 Subsector : B01 Registration Date : 2013-05-24 LVS Latvia Project ID : 00024006/0002 Draft for public enquiry 13.220.01 prlvs 334 Specialized and technical equipment for fire fighting and rescue work This Standard specifies the requirements for assembly of special and technical equipment and facilities necessary for fire fighting and rescue work considering the size of the substantive and territorial units of the State Fire and Rescue Service. Subsector : B01 Registration Date : 2013-05-21 ASI Austria Project ID : 00025697/0001 Project Established 13.220.99, 13.340.60 ÖNORM F 1020 First aid salvage device for fire fighting purposes - Requirements, testing, maintenance - Additional requirements to ÖNORM EN 1498 and ÖNORM EN 1865-1 The present ÖNORM defines a first aid salvage device set, including a salvage sheet and a carrying sheet, packed in a carrying bag. Furthermore the requirements for materials, definitions to design and composition, provisions for testing and designation as well as provisions for the holder are treated. In addition to the provisions of ÖNORM EN 1498 and ÖNORM EN 1865-1, this ÖNORM defines further requirements and designs for first aid salvage device sets for the use of fire and rescue services. Subsector : B01 Registration Date : 2013-05-30 EVS Estonia Project ID : 00114114/0001 Project Established 13.220.10, 93.025, 93.160 EVS 812-6:2011/prA1 Fire safety of constructions - Part 6: Water supply - Amendment A1 This Estonian standard provides the technical solution for design and installation town mains and water network within buildings intended for fire service use. Its specifies performance requirements for fire service water supply capacity, pipe work and rated output discharge. The Amendment supplements requirements for cottages and summerhouses. REV/AMD EVS 812-6:2012 Subsector : B01 Registration Date : 2013-05-27
UNI Italy Project ID : 70001730/0001 Project Established 13.220.20 U70001730 Fire fighting equipment - Dry pipe Fire Hydrant systems - Design, installation and operation This technical specification deals with the design, installation and operation of Dry Pipe Fire Hydrant Systems to be installed in areas subject to freeze. It shall be used in conjunction with UNI 10779. Page 8 Subsector : B01 Registration Date : 2013-05-27 UNI Italy Project ID : 70001741/0001 Project Established 13.220.10 U70001741 Fire fighting equipment - Fire extinguishers - Part 1: Initial verification and maintenance This standard specifies the criteria for initial verification, surveillance, regular control, revision and testing of fire extinguishers in order to guarantee their operational efficiency. This standard does not apply to the activity of extinguishers installation. REV/AMD UNI 9994:2003 Subsector : B01 Registration Date : 2013-05-21 SUTN Slovakia Project ID : 92300313/0001 Project Established 13.220.50, 29.060.20 STN 92 0205/Z1 Fire behaviour of construction products and building constructions. Circuit integrity maintenance of cable systems. Requirements, testing and classification. Amendment 1 REV/AMD STN 92 0205 Subsector : B01 Registration Date : 2013-05-21 SUTN Slovakia Project ID : 92300413/0001 Project Established 13.220.50, 29.060.20 STN 92 1101-4 Products for electrical distribution, control and communications for the purposes of fire safety of buildings. Part 4: Enclosures with fire protection for low-voltage switchgear and controlgear assemblies The task is to establish requirements for fire-fighting properties of low-voltage switchgear and controlgear assemblies for the purpose of fire safety buildings
Page 9 REV/AMD STN 92 1101-4 Subsector : B01 Registration Date : 2013-05-27 NBN Draft Issue Date : 2013-04-08 Belgium Latest Date for Comments : 2013-09-06 Project ID : BE612288/0001 Draft for public enquiry 13.220.10 NBN S 21-024 Fire-fighting hoses - Impermeable lay-flat hoses for connection to fire pumps and fire engines Subsector : B01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182465/0001 Project Established PR NF S61-938/A1 Fire safety systems (F.S.S.). Manual control Device (M.C.D.) - Manual Centralized Control Device (M.C.C.D.) - Control with indicating Device (C.I.D.) - Command Adapter Device (C.A.D.) REV/AMD NF S61-938:199107 (S61-938) Subsector : B01 Registration Date : 2013-05-31 AENOR Spain Project ID : P0041431/0001 Project Established PNE 23510 Fire extinguishing systems in industrial kitchens. General requirements. This standard establishes general requirements for fire protection of industrial kitchens Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2013-05-21 ASI Austria Project ID : 00025696/0001 Project Established 91.040.01 ÖNORM B 1301 Object safety tests for Non-residential buildings - Regular test routines in the course of visual inspections and assessments The present Austrian Standard represents a collection of technical rules for the anticipatory holistic consideration of physical security and for the provable implementation of relevant
Page 10 inspections concerning mandatory and required caution in non-residential buildings (processed organizational knowledge on building security). The physical security inspection routines listed in this ÖNORM can be applied to non-residential buildings in the field of building construction. Residential buildings according to ÖNORM B 1300 as well as buildings in the field of civil engineering are not covered by this ÖNORM. Furthermore, this Austrian Standard does not apply to production plants operating within buildings which are subject to official approval procedures concerning factory management. Possible official procedure steps are not dealt with by this ÖNORM. Subsector : B02 Registration Date : 2013-05-21 ASI Austria Project ID : 00025701/0001 Project Established 91.010.30 ÖNORM B 1800 Beiblatt 1 Determination of areas and volumes of buildings - Supplement 1: Application examples This supplement contains examples of the application of ÖNORM B 1800 for the determination of areas for specific individual cases. Subsector : B02 Registration Date : 2013-05-31 UNMZ Draft Issue Date : 2013-05-30 Czech Republic Latest Date for Comments : 2013-09-30 Project ID : 73004313/0001 Project Established Chimneys and connecting flue pipes - Design, construction and instalation of heatings appliances The aim of the amendmant Z2 is adressing the oulet flue gas fired appliances type "C" and correct the errors of text in standard. REV/AMD Amendment Z2 of ČSN 73 4201 (2010) Subsector : B02 Registration Date : 2013-05-10 TSE Turkey Project ID : tst92006/0001 Project Established 91.100.30 Recommendations for the measurement of dynamic modulus of elasticity This standard gives recommendations for the determination of dynamic modulus of elasticity of plain concrete in the laboratory using resonance of vibration in the longitudinal mode. European : Modified BS 1881-209:1990
Page 11 Subsector : B02 Registration Date : 2013-05-10 TSE Turkey Project ID : tst92006/0001 Project Established 91.100.30 Recommendations for the measurement of dynamic modulus of elasticity This standard gives recommendations for the determination of dynamic modulus of elasticity of plain concrete in the laboratory using resonance of vibration in the longitudinal mode. International : Modified ASTM C 215:2008 Subsector B04: CEMENT Subsector : B04 Registration Date : 2013-05-27 AFNOR France Project ID : FA182590/0001 Project Established PR NF P15-319 Hydraulics binders - Sulphate resisting cement REV/AMD NF P15-319:200609 (P15-319) Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : 2013-05-21 ASI Austria Project ID : 00025698/0001 Project Established 91.190 ÖNORM B 5356 Cylinders for locks - Additional requirements and proportions This Austrian Standard is applicable only jointly with ÖNORM EN 1303. It specifies additional requirements, concepts and dimensions as well as marking of conformity for cylinders for locks in form of profile cylinders. The main feature of this ÖNORM is to ensure the exchangeability of profile cylinders within adequate locks and hardware. Subsector : B08 Registration Date : 2013-05-21 ASI Austria Project ID : 00025700/0001 Project Established 13.220.01, 91.060.50, 91.090 ÖNORM B 3852
Page 12 Fire resisting doorsets - Vertical lifting, sectional overhead, tilting, rolling, sliding and folding doors - Requirements, testing and marking The present Austrian Standard contains regulations for requirements, testing and marking of fire resisting doorsets out of quality controlled production of vertical lifting, sectional overhead, tilting, rolling, sliding and folding doors, according to fire resistance E 30, E 60 and E90, EI2 30, EI2 60 and EI2 90. Excluded of this Austrian Standard are miscellaneous fire resisting doorsets according to ÖNORM B 3850 and attic closures according to ÖNORM B 3860. Subsector : B08 Registration Date : 2013-05-21 ASI Austria Project ID : 00025704/0001 Project Established 13.220.01, 91.190 ÖNORM B 3859 Building hardware - Leverhandles for fire resisting doors - Dimensions and requirements This Austrian Standard includes specifications for design, testing and marking of door lever handles, escutcheons and roses from quality controlled production for fire resisting closures and shutters according to ÖNORM B 3850, ÖNORM B 3851 and ÖNORM B 3852, in combination with door locks conforming to ÖNORM B 3858 and/or DIN 18250. Door fittings as specified in this Austrian Standard fulfil, even in case of fire, the conditions ensuring the function of fire doors. Subsector : B08 Registration Date : 2013-05-08 IPQ Draft Issue Date : 2013-04-16 Portugal Latest Date for Comments : 2013-05-16 Project ID : C0981301/0001 Draft for public enquiry 91.060.50 prnp 4517 Selection of windows, external doors and lightweight facades in function of their exposure This standard aims at the selection of minimal performance classes for external windows, doors and light facades with glass to be installed in Portugal. This standard is intended to support the use of product standards NP EN 14351-1: 2008 EN 13830:2009 + 1 and NP EN 13830: 2009 in Portugal. This standard gives information to make the requirements profile as recommended in Annex D of the standard NP EN 14351-1:2008 + A1. This standard applies to external windows, doors and light facades with glass, whatever material is used Subsector : B08 Registration Date : 2013-05-13 TSE Turkey Project ID : tst12655/0002 Project Established 13.310, 91.060.50
Page 13 Steel doors with burglar resistance This standard covers steel doors which prohibit unouthorited entrance to buildings Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : 2013-05-21 ASI Austria Project ID : 00025705/0001 Project Established 91.120.10 ÖNORM B 8110-6 Thermal insulation in building construction - Part 6: Principles and verification methods - Heating demand and cooling demand This Austrian Standard specifies the principles for calculation of the heating demand and the cooling demand. On the basis of the utilization profiles according to ÖNORM B 8110-5, it enables proof of evidence concerning the requirements according to ÖNORM B 8110-1. Subsector : B09 Registration Date : 2013-05-21 ASI Austria Project ID : 00025706/0001 Project Established 91.120.10 ÖNORM B 8110-8 Thermal insulation in building construction - Part 8: Tabulated design values for thermal insulation of components The present Austrian Standard provides technical design values for thermal insulation of wall and ceiling components as well as of windows, doors and air layers, applicable to all kinds of calculations concerning structural physics, if no product-related characteristic values for thermal insulation according to the relevant Austrian Standards dealing with determination of characteristic values (e.g. ÖNORM B 6015-2 and/or ÖNORM B 6015-5) are available. Subsector : B09 Registration Date : 2013-05-15 DS Draft Issue Date : 2012-02-07 Denmark Latest Date for Comments : 2013-07-15 Project ID : 0M261912/0001 Project Established 91.120.10 DSF/DS 452:2013 Code of Practice for thermal insulation of technical service and supply systems in buildings See Danish scope.
Page 14 Subsector : B09 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001832/0001 Project Established 13.080.01 NEN 5725:2013 Concept nl Soil quality - Strategy for preliminary investigation prior to exploratory and main survey This standard describes priliminary investigation prior to field research. The purpose is to collect relevant information about the location from the owner, government etc, and for interviews, field inspection and archive research. Subsector B13: SOLAR ENERGY Subsector : B13 Registration Date : 2013-05-21 ASI Austria Project ID : 00025694/0001 Project Established 27.160 ÖNORM M 7777 Beiblatt 1 Solar thermal systems - Supplement 1: Examples of hydraulic circuits and worksheets for data collection, commissioning and acceptance The present Supplement shall be applied to the planning, installation and operation of thermal systems with solar collectors using heat transfer fluids. It refers to small and medium-sized solar thermal systems for water heating, heating support and general thermal use up to a gross collector surface of 50 m2, except drain-back and thermosiphon installations. The present Supplement contains standardized examples of hydraulic circuits and worksheets for data collection, commissioning and acceptance of solar thermal systems. Subsector B14: GEOTECHNICS Subsector : B14 Registration Date : 2013-05-16 ISRM Former Yugoslav Republic of Macedonia Project ID : 00042146/0003 Published Standard 93.020 МКС 1004:2013 Geotechnical investigation and testing Field testing Determination of bulk density - Sand-Cone method
Page 15 This Macedonian standard describes the procedure for determination of soil bulk density with Sand-Cone method in field conditions.estimation of soil compaction and verification of density during execution of earthworks and construction of civil engineering structures Subsector : B14 Registration Date : 2013-05-13 TSE Turkey Project ID : tst06168/0001 Project Established 93.020 Soil testing for civil engineering purposes - Chemical tests - Pore water extraction and determination of the soluble salt content of soils by refractometer This test method covers a rapid procedure for squeezing pore water from fine-grained soils for the purpose of determining the amount of soluble salts present in the extracted pore water International : Modified ASTM D 4542:2007 Subsector : B14 Registration Date : 2013-05-13 TSE Turkey Project ID : tst06169/0001 Project Established 93.020 Soil testing for civil engineering purposes - Chemical tests - Determination of the organic matter content This procedure covers the determination of the percentage by dry mass of organic matter present in a soil. European : Modified BS 1377-3:1990 Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : B17 Registration Date : 2013-05-27 AFNOR France Project ID : FA182400/0001 Project Established PR XP X90-013 External light pollution - Control and calculation methods Subsector B20: DRAINAGE EQUIPMENT
Page 16 Subsector : B20 Registration Date : 2013-05-31 UNMZ Draft Issue Date : 2013-08-30 Czech Republic Latest Date for Comments : 2014-02-28 Project ID : 75003813/0001 Project Established Wastewater discharge and treatment from health facilities The aim of revision is up-dating standard and bringing it into line with the ENs and ČSNs in the field of water management and fire safety of buildings, updating normative references. REV/AMD ČSN 75 6406 (1996) Subsector B23: DISTRICT HEATING Subsector : B23 Registration Date : 2013-05-10 UNMZ Draft Issue Date : 2013-05-15 Czech Republic Latest Date for Comments : 2013-06-15 Project ID : 38000413/0001 Project Established Water heating networks, except directly buried networks The aim of the new standard is unification of related Czech Standards using of new information for water heating networks, except directly buried networks REV/AMD CSN 38 3378 Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : 2013-05-16 ISRM Former Yugoslav Republic of Macedonia Project ID : 00042968/0003 Published Standard 91.140.40 МКС 1007:2013 Gas pipelines and fittings indication labels This standard specifies requirements for indication labels for gas pipelines and fittings. Subsector : B25 Registration Date : 2013-05-31 AENOR Spain Project ID : P0041362/0001 Project Established PNE 60601
Page 17 Machines rooms and gas fired self contained apparatus for heating or cooling generation or cogeneration. This standard establishes the requirements applicable to rooms or enclosures that house, well generators for the production of heat or cold by heat transfer fluid, excluding air and including water vapour with a maximum working pressure not exceeding 0,5 bar, whose combined rated output exceeding 70 kw, or cogeneration equipment with nominal heat input exceeding 70 kw, using gaseous fuels of the families defined in the standard UNE-EN 437. This standard also applies to stand-alone equipment, generating either heat or cold, or for cogeneration, outdoor installed. REV/AMD UNE 60601:2006 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : 2013-05-31 BSI United Kingdom Project ID : 01301400/0001 Project Established BS 7533-1 Pavements constructed with clay, natural stone or concrete pavers. Part 1 Design Subsector : B26 Registration Date : 2013-05-31 BSI United Kingdom Project ID : 01301401/0001 Project Established BS 7533-2 Pavements constructed with clay, natural stone or concrete pavers. Part 2 Guidance on Installation Subsector : B26 Registration Date : 2013-05-31 UNMZ Draft Issue Date : 2013-07-30 Czech Republic Latest Date for Comments : 2013-09-30 Project ID : 73006913/0001 Project Established Road Building - Hydraulically Bound Mixture Courses - Part 1: Construction and evaluation of conformity The aim of revision is up-dating of requirements contained in ČSN 73 6123-1:2008 according to EN 14227-1 to EN 14227-5.
Page 18 REV/AMD ČSN 73 6124-1 (2008) Subsector : B26 Registration Date : 2013-05-31 UNMZ Draft Issue Date : 2013-06-30 Czech Republic Latest Date for Comments : 2013-07-30 Project ID : 73007013/0001 Project Established Road building - Concrete pavements - Part 1: Construction and conformity assessment The aim of revision is up-dating of requirements contained in ČSN 73 6123-1:2006 according to EN 13877-1 and EN 13877-2. REV/AMD ČSN 73 6123-1 (2006) Subsector : B26 Registration Date : 2013-05-14 SNV Draft Issue Date : 2013-05-13 Switzerland Latest Date for Comments : 2013-06-24 Project ID : CH130010/0001 Draft for public enquiry 93.080.01 SN 641810 Utility analyzes and cost-effectiveness analyzes for road infrastructure projects Subsector : B26 Registration Date : 2013-05-14 SNV Draft Issue Date : 2013-05-14 Switzerland Latest Date for Comments : 2013-07-14 Project ID : CH130011/0001 Draft for public enquiry 93.080.01 SN 640075 Pedestrian traffic Obstacle-free traffic area Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : 2013-05-27 AFNOR France Project ID : FA182886/0001 Project Established PR FD DTU 43.11 P3 Building work - Impermeability of flat roofs with a masonry structural member in a mountain climate - Part 3 : Guide intended for the contracting authority
Page 19 Subsector B29: AGGREGATES Subsector : B29 Registration Date : 2013-05-27 NBN Belgium Project ID : BE058307/0001 Project Established 91.100.15 NBN B 11-256 Aggregates and grounds - Determination of conventional organic matter content - Method with hydrogen peroxide Subsector B31: HEATING SYSTEMS IN BUILDINGS Subsector : B31 Registration Date : 2013-05-27 UNI Italy Project ID : 0208E380/0001 Project Established 17.200.10 E0208E380 Heat costs allocation based on indirect accounting by insertion time counter and shut-off valves, with insertion time compensated by average temperature of the fluid The Standard defines the indirect accounting method and the prescriptions for plants, installation, use and testing of heat cost allocation systems based on insertion time counter and heat shut-off valves. The insertion time is compensated by the average temperature of the fluid. This systems are used to capture and account the proportionate thermal output of a consumer units for heat cost allocation. REV/AMD UNI/TR 11388:2010 Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2013-05-14 SIS Draft Issue Date : 2013-05-05 Sweden Latest Date for Comments : 2013-07-05 Project ID : 00003070/0001 Project Established 91.190 3070 Door and window fittings Electrically operated locking plates for fixed mounted locks Burglar resistance Requirements and test methods Subsector : B99 Registration Date : 2013-05-14
Page 20 SIS Draft Issue Date : 2013-05-05 Sweden Latest Date for Comments : 2013-07-05 Project ID : 00003072/0001 Project Established 91.190 3072 Door and window fittings Mechanical cylinder Burglar resistance Requirements and test methods ** End of Sector **
Information procedure Page 21 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2013-06-07
Subsector C01: Food products Page 22 Subsector : C01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001814/0001 Project Established 67.100.01 NEN 6809:2013 Concept nl Milk and milk products - Enumeration of thermophilic aerobic sporeforming bacteria This standard describes a method for the determination of the content of thermophilic aerobic sporeforming bacteria. Subsector : C01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001816/0001 Project Established 67.100.01 NEN 6813:2013 Concept nl Milk and milk products - Enumeration of spores of mesophilic aerobic sporeforming bacteria NEN 6813 describes a method for the determination of spores of mesophilic aerobic sporeforming bacteria. Subsector : C01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182530/0001 Project Established PR NF U47-311 Animal health analysis methods - PCR reagent control used in animal health Subsector : C01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182883/0001 Project Established PR NF U47-600-2 Animal health analysis methods - PCR - Part 2 : requirements and recommandations for the development and the validation of veterinary PCR
Page 23 Subsector : C01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182884/0001 Project Established PR NF U47-600-1 Animal health analysis methods - PCR - Part 1 : requirements and recommandations for the implementation of veterinary PCR Subsector : C01 Registration Date : 2013-05-17 TSE Turkey Project ID : t1002698/0001 Project Established 67.080.20 Canned Green Beans With Meat-Ready To Serve This standard applies to canned green beans with meat which is ready to serve. Subsector : C01 Registration Date : 2013-05-17 TSE Turkey Project ID : t1004890/0001 Project Established 67.080.01 Fruit and Vegetable Products- Determination of Soluble Solids Content- Refractometric Method The method is particularly applicable to thick products, to products containing suspendes matter and to products rich in sugars. If the products contain other dissolved substabces, the results will be only approximate, nevertheless they may be considered conventionall as the soluble solids content. The principle as the soluble soldis Subsector : C01 Registration Date : 2013-05-29 TSE Turkey Project ID : t2001070/0001 Project Established 67.120.10 Turkish sucuk This standard specifies Turkish sucuk, it doesn't specify heat-treated sucuk.
Subsector : C01 Registration Date : 2013-05-13 TSE Turkey Project ID : t2004500/0001 Project Established 67.060 Wheat Flour This standard specifies by indivicually wheat floor which is prepared or mixing of triticum aestivum, triticum compactum and tritium drum wheat. Page 24 Subsector : C01 Registration Date : 2013-05-17 TSE Turkey Project ID : tst03522/0001 Project Established 67.220.20 Bakers Yeast This standard applies to bakers yeast and produced at industry which is defined in 0.2.1. It does not apply to beer yeast and wild yeast. Subsector : C01 Registration Date : 2013-05-10 TSE Turkey Project ID : tst12327/0001 Project Established 67.120.20 Processed poultry carcass-wings This standard includes the processed poultry carcass wings Subsector : C01 Registration Date : 2013-05-10 TSE Turkey Project ID : tst13061/0001 Project Established 67.120.20 Processed Turkey Carcass Breast This standart contains the identification, grading, characteristics sampling and presentation of processed turkey breast meat.
Page 25 Subsector : C01 Registration Date : 2013-05-13 TSE Turkey Project ID : tst92142/0001 Project Established 67.080.20 Frozen garnish This standard specifies frozen garnish Subsector C03: CHEMISTRY Subsector : C03 Registration Date : 2013-05-13 TSE Turkey Project ID : t4007808/0001 Project Established 65.020.30 Livestock Marking Tags This standard covers livestock Marking Tags ** End of Sector **
Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2013-06-07
Subsector F12: INFORMATION PROCESSING SYSTEMS Page 27 Subsector : F12 Registration Date : 2013-05-21 ASI Austria Project ID : 00025699/0001 Project Established 35.040 ÖNORM ISO/IEC 27005 Information technology - Security techniques - Information security risk management (ISO/IEC 27005:2011) This ÖNORM provides an accurate guide to IT risk analysis and risk management in the IT field for the Information Security Management ISMS. On the one hand includes a complete description of the risk management process as a whole and on the other hand, a detailed description of each step of the risk management and risk analysis. The annexes provide useful information for development of risk management in information security and the fulfillment of requirements of the ISMS standard ISO / IEC 27001. Subsector : F12 Registration Date : 2013-05-31 UNMZ Draft Issue Date : 2013-06-30 Czech Republic Latest Date for Comments : 2013-09-30 Project ID : 01004113/0001 Project Established 01 8245 Information system in public transport National centre for real time information CISReal National central system of real time information in public transport is a global entity defined by this standard. Generally there is no centre in the Czech Republic which function is to control multimodal or monomodal transport (except air transport) and to organize public transport. There has been no standard to define this issue on national level. Nor technical specification CEN TS 15531 SIRI does not offer the possibility to build up a national information centre so this standard is unique European interoperable solution taking into account national specifics and the state of the art of information systems in public transport. This standard defines minimum requirements on the compatibility of real time information systems in public transport in the Czech Republic. This standard has been created especially for the following reasons: 1. It defines minimum requirements on operation of National central system of real time information in public transport (CISReal); 2. It contains the recommendations for equipment and functionality of real time information system (ISR); 3. It unifies the requirements on ISR of diferent carriers and at the same time provides guidance for procedure when designing system and its technical requirements which is important mainly for appliances for financial subventions to build-up such systems and technical requirements definition for public tenders; 4. It improves the possibilities to gain non-fragmented and national scale data in real time of PT vehicles providing a transport services among various regions; 5. It enables basic cooperation on European solution defined by CEN TS 15531 (SIRI) specifying interfaces and communication among the servers; 6. It is the basis for designing a distribution system for mutual communication of servers of local and integrated transport providers; 7. It is to profit from the existing National system of timetables (CIS JŘ) which contains the
Page 28 necessary set of static data (planned data). Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : 2013-05-27 AFNOR France Project ID : FA182506/0001 Project Established PR NF X50-056 Services for resident persons Subsector : F20 Registration Date : 2013-05-27 AENOR Spain Latest Date for Comments : 2013-06-23 Project ID : P0040828/0002 Draft for public enquiry PNE 192001-10 Inspection procedure for establishments affected by major-accident hazards involving dangerous substances. Part 10: Evaluation of the location of the emergency plan This standard develops the methodology to apply in order to assess the veracity and the implementation of the Self- Protection Plan, defined as internal Emergency Plan in the Regulation of Serious Accidents involving Dangerous Substances. Subsector : F20 Registration Date : 2013-05-31 TSE Turkey Project ID : tst12394/0001 Project Established 95.020 Demountable load carrying platforms This standard contains the relevant technical specifications for the determination of technical features of demontable load carrying platforms. Subsector F99: UNDETERMINED Subsector : F99 Registration Date : 2013-05-27 AFNOR
France Project ID : FA182398/0001 Project Established PR XP X50-144-5 Demonstration of the resistance to environmental factors Designing and performing environmental tests - Part 5 : Guarantee corfficient Page 29 Subsector : F99 Registration Date : 2013-05-27 AFNOR France Project ID : FA182399/0001 Project Established PR XP X50-144-6 Demonstration of the resistance to environmental factors - Designing and performing environmental tests - Part 6 : Test factor ** End of Sector **
Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector I : MECHANICAL ENGINEERING Register issued on : 2013-06-07
Subsector I09: SMALL TOOLS Page 31 Subsector : I09 Registration Date : 2013-05-22 TSE Turkey Project ID : tst05878/0001 Project Established 25.100.70 Abrasive Papers and Cloths This standard covers abrasive papers and cloths. European : Modified BS 3431:1973 Subsector : I09 Registration Date : 2013-05-22 TSE Turkey Project ID : tst05878/0001 Project Established 25.100.70 Abrasive Papers and Cloths This standard covers abrasive papers and cloths. European : Modified BS 410-1:2000 Subsector : I09 Registration Date : 2013-05-22 TSE Turkey Project ID : tst05878/0001 Project Established 25.100.70 Abrasive Papers and Cloths This standard covers abrasive papers and cloths. European : Modified BS 410-2:2000 Subsector : I09 Registration Date : 2013-05-22 TSE Turkey Project ID : tst05878/0001 Project Established 25.100.70 Abrasive Papers and Cloths This standard covers abrasive papers and cloths. International : Modified ISO 21948:2001 Subsector : I09 Registration Date : 2013-05-22 TSE
Page 32 Turkey Project ID : tst05878/0001 Project Established 25.100.70 Abrasive Papers and Cloths This standard covers abrasive papers and cloths. International : Modified ISO 3366:1999 Subsector I11: MACHINE TOOLS Subsector : I11 Registration Date : 2013-05-21 ASI Austria Project ID : 00025703/0001 Project Established 25.100.01, 25.100.70 ÖNORM ISO 6104 Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature This International Standard gives a general survey, and specifies the designation, of rotating grinding tools with diamond or cubic boron nitride superabrasive section. It also gives a multilingual nomenclature concerning these tools. Subsector I12: PULLEYS & BELTS Subsector : I12 Registration Date : 2013-05-31 BSI United Kingdom Project ID : 01301473/0001 Project Established BS 6593:1985+A1:2009 Corrigendum On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting. Corrigendum Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY Subsector : I15 Registration Date : 2013-05-31 BSI Draft Issue Date : 2013-05-28 United Kingdom Latest Date for Comments : 2013-07-31 Project ID : 01102832/0001 Draft for public enquiry PD 8010-5 PD 8010-5. Pipeline systems. Part 5. Subsea pipelines. Guide to operational
practice Page 33 Subsector I28: FLUID POWER Subsector : I28 Registration Date : 2013-05-31 BSI United Kingdom Project ID : 01301559/0001 Project Established BS 4368-1:1998 Metallic tube connectors for fluid power and general use. Part 1 Split collet compression fitting. Amendment Subsector I32: FLANGES Subsector : I32 Registration Date : 2013-05-28 TSE Turkey Project ID : tst12884/0002 Project Established 23.060.40 Earthquake actuated automatic gas shut-off devices This standard covers the earthquake actuated automatic gas shut-off devices International : Not Equivalent to ANSI Z 21.21:1995 Subsector : I32 Registration Date : 2013-05-28 TSE Turkey Project ID : tst12884/0002 Project Established 23.060.40 Earthquake actuated automatic gas shut-off devices This standard covers the earthquake actuated automatic gas shut-off devices International : Not Equivalent to ANSI Z 21:1970 Subsector : I32 Registration Date : 2013-05-28 TSE Turkey Project ID : tst12884/0002 Project Established 23.060.40
Page 34 Earthquake actuated automatic gas shut-off devices This standard covers the earthquake actuated automatic gas shut-off devices International : Not Equivalent to ANSI/IEEE 334:1987 Subsector : I32 Registration Date : 2013-05-28 TSE Turkey Project ID : tst12884/0002 Project Established 23.060.40 Earthquake actuated automatic gas shut-off devices This standard covers the earthquake actuated automatic gas shut-off devices International : Not Equivalent to ASCE 25:1997 Subsector I40: INDUSTRIAL PIPING NETWORKS Subsector : I40 Registration Date : 2013-05-31 BSI United Kingdom Project ID : 01301348/0001 Project Established BS 1710 Specification for identification of pipelines and services Subsector I99: UNDETERMINED Subsector : I99 Registration Date : 2013-05-28 SFS Draft Issue Date : 2013-05-21 Finland Latest Date for Comments : 2013-07-22 Project ID : 0000E293/0001 Draft for public enquiry Accident recording system for lifts, lifting platforms, escalators and moving walks
Page 35 Subsector : I99 Registration Date : 2013-05-10 DIN Germany Project ID : 01200431/0001 Project Established 01200431 Dispense systems for draught beverages - Part 5: Testing ** End of Sector **
Information procedure Page 36 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector M : METALLIC MATERIALS Register issued on : 2013-06-07
Subsector M01: STEEL Page 37 Subsector : M01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182809/0001 Project Established PR NF A35-080-1 Reinforcing steel - Weldable steel - Part 1 : bars and coils REV/AMD NF A35-080-1:201010 (A35-080-1) Subsector : M01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182810/0001 Project Established PR NF A35-080-2 Reinforcing steel - Weldable steel - Part 2 : welded fabric REV/AMD NF A35-080-2:201010 (A35-080-2) Subsector : M01 Registration Date : 2013-05-27 AFNOR France Project ID : FA182823/0001 Project Established PR XPA04-800 Steel products - Non-melting assessment method of light scrap by the means of shredding, magnetic sorting and washing - Determination of the content of the clean and dry magnetic product Subsector M05: WELDING Subsector : M05 Registration Date : 2013-05-27 AFNOR France Project ID : FA182396/0001 Project Established PR NF A 81-362 Welding, soldering, brazing, braze-welding - Filler metals for soldering, brazing and braze-welding - Classification, coding, acceptance testing REV/AMD NF A81-362:201012 (A81-362)
** End of Sector ** Page 38
Information procedure Page 39 Monthly Notifications Register Notifications registered at CCMC from 2013-05-01 to 2013-05-31 Sector N : NON-METALLIC MATERIALS Register issued on : 2013-06-07
Subsector N01: PAPER AND BOARD Page 40 Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001818/0001 Project Established 85.060 NEN 1761:2013 Concept nl Paper and board - Determination of machine direction and cross direction NEN 1761 describes four methods for the determination of the machine direction and cross direction of paper and board. The first two methods are fast orientating research. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001819/0001 Project Established 85.060 NEN 1764:2013 Concept nl Paper - Determination of wire side NEN 1764 describes three methods for the determination of wire side of paper. The standard is applicable to all sorts of simple not coated paper. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001820/0001 Project Established 85.060 NEN 1827:2013 Concept nl Paper and board - Determination of the changes of dimensions after immersion in water (Fenchel method) This standard describes a method for the determination of the changes of dimensions by total immersion in water and is applicable to most sorts of paper and board with a mass per surface up to 250 gram/m2. The method is not suitable to crepe paper and corrugated cardboard. The changes of dimensions of paper and board by changes of the relative humidity is measured according to NEN 1856. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001821/0001 Project Established 85.060 NEN 1839:2013 Concept nl Paper - Determination of paper surface roughness with water NEN 1839 describes the determination of the surface roughness of paper under pressure
Page 41 during the printing process. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001822/0001 Project Established 85.060 NEN 1857:2013 Concept nl Paper and board - Determination of surface abrasion - Taber method NEN 1857 describes a method for the determination of surface abrasion of paper or board in wet or dry condition. The standard is applicable to all sorts of paper and board but not when the surface is treated with wax or similar products. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001823/0001 Project Established 85.060 NEN 1858:2013 Concept nl Paper and board - Determination of plybond strength NEN 1858 describes a method for the determination of plybond strength of board and paper. Subsector : N01 Registration Date : 2013-05-08 NEN Netherlands Project ID : 50001824/0001 Project Established 85.060 NEN 2014:2013 nl Paper and board - Determination of air permeability, Bekk method NEN 2014 describes the determination of the permeability of paper and board. The Bekk method is applicable to densed paper. Subsector N03: PETROLEUM PRODUCTS Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25
Page 42 Project ID : 00043369/0001 Draft for public enquiry 75.160.20 SRPS B.H2.125:2013 Standard Specification for Aviation Gasoline This specification covers formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies. This specification defines specific types of aviation gasolines for civil use. It does not include all gasolines satisfactory for reciprocating aviation engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043370/0001 Draft for public enquiry 75.160.20 SRPS B.H2.126:2013 Standard Specification for Aviation Turbine Fuels This specification covers purchases of aviation turbine fuel under contract and is intended primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for aviation turbine engines, but rather, defines the following specific types of aviation fuel for civil use: Jet A; and Jet A-1. The fuels shall be sampled and tested appropriately to examine their conformance to detailed requirements as to composition, volatility, fluidity, combustion, corrosion, thermal stability, contaminants, and additives. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043372/0001 Draft for public enquiry 75.160.20 SRPS B.H0.502:2013 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination This practice covers the types of and preparation of containers found most suitable for the handling of aviation fuel samples for the determination of critical properties affected by trace contamination. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043373/0001 Draft for public enquiry SRPS B.H0.501:2013 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
Page 43 This guide provides personnel who have a limited microbiological background with an understanding of the symptoms, occurrence, and consequences of chronic microbial contamination. The guide also suggests means for detection and control of microbial contamination in fuels and fuel systems. This guide applies primarily to gasoline, aviation, boiler, industrial gas turbine, diesel, marine, furnace fuels and blend stocks (see Specifications D396, D910, D975, D1655, D2069, D2880, D3699, D4814, D6227, and D6751), and fuel systems. However, the principles discussed herein also apply generally to crude oil and all liquid petroleum fuels. ASTM Manual 47 provides a more detailed treatment of the concepts introduced in this guide; it also provides a compilation of all of the standards referenced herein. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043829/0001 Draft for public enquiry SRPS B.H8.177:2013 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method This test method covers the automatic determination of color of a wide variety of petroleum products such as undyed motor and aviation gasoline, aviation turbine fuels, naphthas, kerosine, pharmaceutical white oils, diesel fuel oils, heating oils, and lubricating oils by the automatic tristimulus method. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043830/0001 Draft for public enquiry 75.160.20 SRPS B.H8.159:2013 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels This standard gives test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system. The differential pressure values in mm Hg are defined only in terms of this test method. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043831/0001 Draft for public enquiry 75.160.20 SRPS B.H8.149:2013 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel This test method covers two procedures for determination of the smoke point of kerosine
Page 44 and aviation turbine fuel, a manual procedure and an automated procedure, which give results with different precision. The smoke point is related to the hydrocarbon type composition of such fuels. Generally the more aromatic the fuel the smokier the flame. A high smoke point indicates a fuel of low smoke producing tendency. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043832/0001 Draft for public enquiry SRPS B.H8.128:2013 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure This standard specifies test method that covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive sparkignition engine fuels with or without oxygenates, aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels. The test method is designed for the analysis of distillate fuels; it is not applicable to products containing appreciable quantities of residual material. This test method covers both manual and automated instruments. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043833/0001 Draft for public enquiry SRPS B.H8.126:2013 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence This standard specifies test method that covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 to 400 C, with viscosities between approximately 0,2 and 20 cst (mm 2/S) at room temperature. Subsector : N03 Registration Date : 2013-05-22 ISS Serbia Latest Date for Comments : 2013-06-25 Project ID : 00043834/0001 Draft for public enquiry 75.160.20 SRPS B.H2.127:2013 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark- Ignition Engines This specification covers a fuel blend, nominally 75 to 85 volume % denatured fuel ethanol