Unrivalled Detection. Ground breaking gas detectors you can count on. Product guide
About Ion Science What we do Ion Science is a leading UK manufacturer of technologically advanced gas detection equipment, distributed worldwide. Our instruments Our portfolio of instruments provide you with unrivalled detection and monitoring capabilities within the harshest of environments. Choose from our range of: PID / VOC detectors Benzene selective monitors Leak detectors Ground gas monitors Hydrogen flux monitors Mercury analysers Gases and applications Our instruments are designed for use across a wide number of industries and applications, wherever you have a need to detect gases and vapours, including: Oil & gas Chemical & petrochemical Health & safety Industrial hygiene Environmental Pharmaceutical First response Hazardous materials Our commitment to you We are committed to developing the highest quality instruments that give you the most accurate, reliable results backed by an unrivalled level of customer service and support. Page 1
Proven photoionisation detection (PID) Largest PID manufacturer on the market IonPID TM, the miniature photoionisation detection sensor from Ion Science (also known as MiniPID TM ) is revolutionising the gas detection market. IonPID is found in all our PID instruments and has been adopted by leading gas detection manufacturers worldwide, making it the most widely used PID sensor. Independently verified as best performing PID technology Our PID sensor technology has received independent verification as best performing on the market proven to outperform all others for speed, accuracy, and give the best performance within humid environments. Optimal resistance to humidity and contamination IonPID incorporates the unique patented Fence Electrode Technology with three electrode format and Anti-contamination design, IonPID within Tiger enabling maximum resistance to humidity and contamination. The sensor is highly sensitive with rapid response and clear down, giving outstanding performance in the field. Easy to service The IonPID sensor is fully serviceable with its electrode stack/pellet and lamp easily replaced in seconds even whilst out in the field, minimising instrument downtime. Page 2
Cub Personal PID Monitor Cub is the smallest, lightest personal PID monitor available for fast, accurate detection of volatile and total aromatic compounds keeping you safe within your working environment. Industrial hygiene Oil & gas Chemical & petrochemical Health & safety Pharmaceutical First response Hazardous materials Environmental Market leading ppb sensitivity Small, lightweight & unobtrusive to wear PID independently verified as best performing Widest detection range; 1 ppb - 5000 ppm Unaffected by humidity Anti-contamination design Measures TWAs & STELs for 450 selectable compounds Longest battery life for extended run time Cub TAC variant available for total aromatic compounds (TACs), including benzene For more information visit: /cub Page 3
PhoCheck Tiger Handheld VOC detector A revolutionary handheld detector, PhoCheck Tiger provides rapid, accurate detection of volatile organic compounds (VOCs) with high resistance to humidity and contamination. Industrial hygiene Oil & gas Chemical & petrochemical Health & safety Pharmaceutical First response Hazardous materials Environmental PID independently verified as best performing Widest detection range; 1 ppb - 20,000 ppm Unaffected by humidity Anti-contamination design Measures TWAs & STELs for 450 selectable compounds Fast 2 second response Longest battery life for extended run time Easy to use - minimal training Robust, rugged design Bright LED & vibration alarms Low running costs For more information visit: /tiger Page 4
Tiger Select Handheld benzene & TAC detector Tiger Select with two-mode operation rapidly detects benzene and Total Aromatic Compounds (TACs) providing the most accurate, reliable data you can count on. Refinery downstream monitoring TAC detection at loading docks & barge operations Confined space entry Hazardous materials Marine spill response PID independently verified as best performing Fast, accurate detection Instant read-out on start up Measures benzene with or without tube attachment Continuous readings displayed Market leading ppb sensitivity Unaffected by humidity Anti-contamination design Longest battery life for extended run time Easy to use - minimal training Robust, rugged design Low running costs For more information visit: /select Page 5
FirstCheck+ + Handheld VOC & multi-gas detector Firstcheck + is the first ppb VOC plus multi-gas detector which combines VOC detection with explosive gas (LEL) sensors using a highly sensitive PID. First response Confined space entry Hazardous materials Industrial Leak detection / fugitive emissions VOCs, O2, CO, H2S and LEL Detects VOCs from ppb to 10,000 ppm Inert flow path maximises response to heavy and reactive compounds PID independently verified as best performing Unaffected by humidity Anti-contamination design Rapid response and recovery Accurate, reliable readings Measures TWAs & STELs for 450 selectable compounds Continuous data logging Intrinsically Safe for use in flammable areas For more information visit: /firstcheck Page 6
TVOC Fixed VOC detector TVOC is a fixed PID detector for fast, accurate detection of volatile organic compounds with multiple detection range from just one instrument. Pharmaceutical Chemical industry Indoor air quality Refineries Petrochemical plants Solvent recovery systems PID independently verified as best performing Unaffected by humidity Anti-contamination design Accurately measures over three different ranges Measures TWAs & STELs for 450 selectable compounds Diffusive monitoring - no pump required Robust, rugged design ATEX & IECEx approved Simple to use - minimal training required Easy access PID sensor Simple service and calibration For more information visit: /tvoc Page 7
MVI Portable Mercury Vapour Analyser MVI accurately detects mercury vapours in just 3 seconds. MVI does not saturate or need regenerating, eliminating instrument downtime. No saturation, no regeneration, no downtime Range: 0.1-200 & 1.0-1999 microgram/cubic meter Fast indication and recovery 3 second response Highly accurate measurement Ready to detect in minutes Continuous readings Simple, one-handed operation Large digital display Audible alarm Robust and portable Manufacturing Recycling Mining Petroleum Fluorescent lamp reprocessing plants For more information visit: /mvi Page 8
GasClam Portable ground gas monitor GasClam is the first monitor to give continuous, high quality data needed to understand the risks from ground-gas and is driving regulatory change globally. Collects continuous data in real time VOC, O2, CH4, CO2, H2S and CO Records temperature & pressure Remote unmanned operation Intrinsically Safe IP-68 Easy installation into 50mm borehole Telemetry module available Landfill gas monitoring Brownfields Below ground carbon capture Hydrofracking Vapour intrusion CO2sequestration Underground fires For more information visit: /gasclam Page 9
GasCheck G & GasCheck IS Handheld gas leak detectors GasCheck G and GasCheck IS are handheld leak detectors designed for the search and location of gas leaks, providing you with effective detection of almost any gas or gas mixture. Detect almost any gas Reliable, stable & repeatable Ready to detect instantly Clear indication of leaks cc/sec, mg/m³ or ppm readings Handheld Easy to use Robust Upgradeable Intrinsically Safe version available for use in flammable areas (GasCheck IS) Industrial Refrigeration Manufacturing Quality assurance Laboratory For more information visit: /gascheck Page 10
SF6 GasCheck P1 & SF6 LeakCheck P1:p Transportable SF6 leak detector The SF6 GasCheck P1 and LeakCheck P1:p are award winning SF6 leak detectors ensuring incredibly fast detection at ultra sensitive levels. Award winning technology Highly sensitive, detects leaks down to 1 x 10-8 ml/sec* 1 second rise and clear down Unaffected by large leaks and 100% SF6 Choice of display units Easy storage & transportation Low cost of ownership No delays between searches Easy navigation Lightweight & ergonomic Data storage and printing for data analysis * High sense option Leak testing in high voltage switchgear Breathing device testing Medical device testing Refrigerant leak testing Air conditioning leak testing For more information visit: /sf6 Page 11
SF6 AreaCheck P2 Fixed SF6 leak detector Designed for fixed continuous SF6 area monitoring, the AreaCheck P2 with award winning technology rapidly detects low-level SF6 leaks. Immediate SF6 leak detection Award winning technology No cross sensitivity with other gases or moisture in the air Clear audio & visual alarms Built in low flow alarm and diagnostics test Exchangeable SmartSensor (24 month lifetime) Data logging Low maintenance Use as a standalone detector or with the P2 network controller and up to 11 other SF6 AreaCheck P2s SF6 leak testing & measurement in high voltage switchgear (GIS) Breathing apparatus testing Leak integrity testing on medical, refrigeration & air conditioning equipment containing SF6 & (H)CFCs For more information visit: /sf6p2 Page 12
Hydrosteel 6000 Handheld corrosion monitor The Hydrosteel 6000 hydrogen flux monitor is the ultimate portable tool for active sour HF and high temperature corrosion and diffusible hydrogen damage in steel. Rapid, reliable & repeatable measurement of hydrogen flux Non-intrusive monitoring Operates on steel pipes up to 500 C Operates in any orientation Accommodates surfaces from 3.5 diameter to flat Intrinsically Safe Portable & lightweight Simple to use Little or no test surface preparation needed No costly consumables required Measurement of active corrosion in steel pipes and vessels in petrochemical service Hydrogen monitoring during pre-weld hydrogen Identification of corrosion hotspots For more information visit: /hydrosteel6000 Page 13
Hydrosteel 7000 & 7000TL Fixed corrosion monitors Hydrosteel 7000 and 7000TL are fixed, totally non-intrusive corrosion monitors for the continuous measurement of active corrosion and hydrogen in steel damage risk. Corrosion control Feedstock blending HIC damage reduction & control Sour, HF acid & high temperature corrosion monitoring Risk based inspection of prospective hydrogen damage Responds to corrosion changes in minutes Highly sensitive & precise Non intrusive monitoring No human intervention needed Can be applied to steel surfaces up to 500 C Operates between -20 & 55 C Intrinsically Safe Waterproof to IP66 Withstands harsh environments Low maintenance Measurements stored internally Lightweight (4kg) battery* * Hydrosteel 7000TL For more information visit: /hydrosteel7000 Page 14
Contact information Ion Science The Ion Science head office and manufacturing plant is located near Cambridge, UK, with additional branches in the USA and Germany. Contact us via the details below. Global distributors A network of Ion Science distributors can be found in most countries around the globe. Visit the where to buy section of our website to find a local distributor near you. Ion Science Head Office The Way, Fowlmere, Cambridgeshire, SG8 7UJ, UK T: +44 (0) 1763 208503 F: +44 (0) 1763 208814 E: info@ionscience.com W: Ion Science US Office 33 Commercial Drive, Waterbury, VT 05676, USA Toll Free: 877 864 7710 F: +1 802 244 8942 E: info@ionscienceusa.com W: Ion Science Messetechnik Laubach 30, Mettmann, Neandertal, D-40822, Germany Tel: +49 2104 14480 Fax: +49 2104 144825 Email: info@ism-d.de Web: www.ism-d.de