PRODUCT CATALOGUE Cape Town 18 Darter Road Blue Water Estate Kommetjie Luke Fowles - 076 161 8124 luke@providenttech.co.za Frank Fowles - 082 445 1541 frank@providenttech.co.za www.providenttech.co.za Gauteng 245 Louis Botha Avenue Orchards Johannesburg Reiken Pinnoy - 083 419 8423 reiken@providenttech.co.za Hamilton Murray - 083 283 4063 hamilton@providenttech.co.za
DDS is a leading manufacturer of global security solutions, based on advanced access control and alarm monitoring systems. Hundreds of thousands of doors are controlled by DDS in 40 countries. DDS solutions cover all types of installation. They fit low budget single sites, as well as complex top security multi-sites. With close to 30 years' track record of manufacturing excellence. DDS has served an impressive list of prestigious clients in banks, hospitals, high tech, mobile tel, refineries, army bases, polices, prisons, courts of justice, sport stadium, airports and a wide range of companies in all fields. DDS manufactures the latest cutting edge security solutions. It is fully committed to develop innovative, reliable, easy-to-use quality solutions. The wide range of features addresses most requirements, and yet software and hardware are kept simple enough to operate and maintain JET ACCESS AND ALARM CONTROLLER JET has been developed to provide a high performance on-line access control and alarm monitoring solution for large installations in terms of number of cardholders and events in memory. The JET is a 4-reader controller supervising the entries and exits at 2 doors or the entries at 4 doors. JET4/JX - 2 door / 4 reader controller for 2000 users (expandable to 40K users with memory extension) multi-technology (same reader technology on same controller) Has 4 output relays, 8 inputs and 2 serial com ports JET4-IP/JX - Same as above but with TCPIP on board JET-D4/JZ - 4 door / 4 reader controller for 2000 users (expandable to 32K users with memory extension) multi-technology (same reader technology on same controller) Has 4 output relays, 8 inputs and 2 serial com ports JET-D4-IP/JZ - Same as above but with TCPIP on board 4-reader/2-door (JET) or 4-reader/4-door (JET-D4) 8 supervised inputs, extendable to 16 inputs with an extension board 3 technical alarms for tamper, power supply failure and battery low 4 relays extendable to 64 Up to 44,500 card holders for JET Up to 32,700 card holders for JET-D4 Up to 47000 events in memory (with RAM dynamic allocation) 512KB RAM 255 daily programs 127 weekly programs 255 reflexes (local and network) Speed from 4.800 to 38,400 Bauds 2 on-board serial ports (RS232 / RS485 and RS485 in option) with leds control RS232 / RS485 selector switch 2 extra pins to ease door openers installation Redundant bus Global reflex and APB without PC, via the second bus of communication Polling or event driven operation Programmable communication encryption TCP/IP on board or via extension board (options) Autonomous decisions at the local level without degradation Multi-technology: biometric, smart card, proximity, magnetic, etc. Removable connectors High reliability in adverse environments
DS216-12 DVC ALARM CONTROLLER The DS216 is an I/O controller which offers the optimal solution for real-time monitoring of alarm points (PIR's, fire detectors, etc.) and output relays. The DS216 is a high capability alarm controller, which allows many I/O extensions from plug-in extension board (EXT-84', EXT-TCP84 or EXT-RLY12) or from up to 3 satellites connected to the second bus of communication. The DS216 can be used alone or in association with other DDS controllers and can be mounted on DIN rails. Universal input/output controller enabling maximum flexibility Supervised inputs 4 states: up to 24 (16 on-board, 8 from extension board) Relays: up to 64 (4 on-board, 12 from extension board and 48 from satellites) 2 RS485 serial ports TCP/IP on board (option) Status LEDs for relays & inputs Relay led: "on" when relay activated Input led: "on" when input open or line is cut Last events memory: 4.500 Daily time zones: 99 Weekly time zones: 80 Holidays / special days: 60 / 120 Redundant communication Global reflex with or without PC Communication encryption 128 KB RAM memory (for operating tables and buffer) 1MB Flash memory (for firmware) On-board lithium battery EXTENSION BOARDS The extension boards provide a cost efficient solution when the JET or DS216 controllers require additional I/O and/or TCP/IP interface. This cost efficient solution makes the controllers versatile and effective for applications involving lift control, locker control, CCTV matrix, etc. The extension board is simply plugged into the corresponding connector of the controller Four extension boards are available: EXT-TCP: TCP/IP interface EXT-84: 8 supervised inputs and 4 outputs EXT-TCP84: TCP/IP interface + 8 supervised inputs and 4 outputs EXT-RLY12: 12 outputs NO, for use in lift management applications for example INPUT / OUTPUT CAPABILITIES JET DS216 INPUTS 8 16 Controller + EXT84 16 24 OUTPUTS 4 4 Controller + EXT84 8 8 Controller + RLY12 16 16
DL12 PROXOMITY READER Access control EMarine: proximity - 125KHZ reads Wiegand 26-Bit EM cards Two bi-colour leds acknowledging access Reading range: 5cm Can be used indoor or outdoor Operating voltage range 5-16 VDC Built-in audible buzzer acknowledging card reading Tamper output: a built-in tamper switch (optical detection, NC mode) allows raising an alarm when the reader is removed from the wall or the cable is cut Hidden mounting screws deters vandalism BIOENTRY PLUS READER BioEntry Plus is an waterproof IP based fingerprint access control device featuring easy installation and user friendly operations. Integrated with both fingerprint and proximity card, BioEntry Plus covers a full range of access control applications from a simple standalone door control to complex networked access control systems. Fast and accurate fingerprint identification: Award winning fingerprint algorithm 1:2000 fingerprint identification in 1 second Easy installation and connectivity: Ethernet interface for TCP / IP communication Wiegand output configurable up to 64 bits Internal relay for direct lock interface Easy operation and management: Built-in RF card reader for different user authentication modes (fingerprint and/or card) Easy-to-use PC software for access control and time attendance Optional standalone user management using command cards Template on card to store fingerprint date on a smart card Slim and elegant design: Slim design for installation on a door frame Multi colour LED and multi-tone buzzer for intuitive user interface Full access control features: 128 access groups and 128 time schedules Anti-pass back door zones supporting 32 readers Tamper switch and duress finger option External relay unit: Secure door control and I/O expansion Specifications: CPU: 400MHz DSP Memory: 4MB flash + 8MB RAM Fingerprint sensor: 500 dpi optical sensor Identification speed: 2,000 match in 1 second Fingerprint capacity: 10,000 templates (5,000 users) Log capacity: 50,000 events RF card: Proximity (125kHz EM), Mifare (13.56MHz) Operation modes: fingerprint, RF card, RF card + fingerprint Network interface: TCP/IP, RS485 Wiegand output: configurable up to 64 bits TTL I/O: 2 inputs for exit switch and door sensor Internal relay: deadbolt, EM lock, door strike, automatic door Sound and interface: multi-colour LED and multi-tone buzzer Operating voltage: 12VDC
AMADEUS 5 SOFTWARE Amadeus 5 is DDS powerful yet user-friendly on-line access control and alarm monitoring software. A large range of adaptive software solution modules allows you to tailor big and small installations. Packed with sophisticated features it perfectly fits the strict requirements of high security delocalised multi-sites with several hundred thousand of users. For small size installations, Amadeus 5 Light combines cost effectiveness, ease of use and high performance. Amadeus 5 s huge system capacity enables an almost unlimited number of doors, controllers, cardholders, readers, supervised alarms, outputs, operators, access groups and security levels. Thousands of networks can be supervised. The user-friendly software solution is easy to configure and use, with predefined parameters for fast installation, automatic actions and reflexes, as well as personalised reports wizard. Comprehensive information on real-time alarms, cardholder transactions and events are displayed in the active alarm window, event log, diagnostic screens and live interactive maps. Online Help is available from each screen. With the best return on investment, Amadeus 5 s rich features can easily grow with an evolving customer s needs. Optional modules seamlessly integrate with existing solutions. The powerful communication environment allows redundant communication, alarm event mode, communication encryption and reflexes for emergency and routine operations, through the controller s optional second bus. Several integration gateways ease the interface with third party products. API, OPC server and Modbus IP protocol are used for exporting alarms and events to building automation, process control systems or human resources software. Efficiency and security in Amadeus 5 are based on 32 bit key communication encryption, database mirroring, redundancy DB architecture, data archival & back-up and bi-directional data exchange. Amadeus 5 is compatible with Windows XP or higher, Windows Server 2003 or higher, MS SQL Server 2005 or higher. Amadeus 5 benefits: Amadeus 5 is a powerful yet user-friendly on-line access control and alarm monitoring software. Big and small installations pick up the best adapted software capabilities among the large range available Access control: Amadeus 5 offers a large palette of standard features and modules to ensure secure access to installations of all sizes and all levels of sophistication. Alarm monitoring: The alarm monitoring module allows easy arming / disarming of alarms and alarm zones as well as creation of actions, processes and global reflexes Time and Attendance: Amadeus 5 provides an advanced Time and Attendance solution. Creation of comprehensive reports and smooth data export to an external T&A application are more user friendly than ever. Web client support: Even far from your PC, Amadeus 5 is close to you! Connect to Amadeus 5 from any machine on the LAN, via a web browser through our dedicated web application.