Dimensions & Speifiations Model Produt # Capaity Quantity Cu. Ft. Shipping Weight 2.2 liter Push-Button Airpot 28696.0002 2.2 liters (74 oz.) single unit 1.3 4.5 lbs. 2.2 liter Push-Button Airpot 28696.0000 2.2 liters (74 oz.) 6 units to a ase 2.8 24 lbs. 2.5 liter Push-Button Airpot 13041.0001 2.5 liters (84 oz.) single unit 1.2 5 lbs. 2.5 liter Push-Button Airpot 13041.0101 2.5 liters (84 oz.) 6 units to a ase 2.8 25 lbs. 2.5 liter Lever-Ation Airpot* 32125.0000 2.5 liters (84 oz.) single unit 1.2 5.3 lbs. 2.5 liter Lever-Ation Airpot* 32125.0100 2.5 liters (84 oz.) 6 units to a ase 2.8 32 lbs. 3.0 liter Lever-Ation Airpot* 32130.0000 3.0 liters (102 oz.) single unit 1.2 5.8 lbs. 3.0 liter Lever-Ation Airpot* 32130.0100 3.0 liters (102 oz.) 6 units to a ase 2.8 35 lbs. 3.8 liter Lever-Ation Airpot* 36725.0000 3.8 liters (128 oz.) single unit.81 7 lbs. 3.8 liter Lever-Ation Airpot* 36725.0100 3.8 liters (128 oz.) 6 units to a ase 4.9 41 lbs. 1.9 liter Thermal Pither 39430.0000 1.9 liters (64 oz.) single unit.25 3 lbs. 1.9 liter Thermal Pither 39430.0100 1.9 liters (64 oz.) 6 units to a ase 1.5 17 lbs. *Note: Stainless Steel Liner. 2.2 liter Push-Button Airpot 2.5 liter Lever-Ation Airpot 2.5 liter Push-Button Airpot 3.0 liter Lever-Ation Airpot 1.9 liter Thermal Pither 3.8 liter Lever-Ation Airpot BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 800-637-8606 217-529-6601 Fax 217-529-6644 www.bunn.om Item: 37 BUNN praties ontinuous produt researh and improvement. We reserve the right to hange speifiations and produt design without notie. Suh revisions do not entitle the buyer to orresponding hanges, improvements, additions or replaements for previously purhased equipment. Quantity: 6 All dimensions shown in inhes. Bunn Corporation owns all opyrights relating to materials in this publiation. Please ontat Bunn Corporation to request permission to reprodue any portion of this publiation.
ITEM# Fresh Mix Dispenser with 4 or 5 Hoppers PROJECT DATE Features Fresh Mix Dispensers with 4 or 5 Hoppers Capaity: FMD-4: One 8-pound hopper; three, 4-pound hoppers FMD-5: Five, 4-pound hoppers Large, lighted front graphis for merhandising. 6.4 gallon (24.2 litres) hot water tank to meet peak serving times. Cup learane at 7 (17.8 m) to aommodate ommon up sizes. Eletrial and plumbing omponents easily aessible through front and top. Variable speed motors allow ontrol of produt onsisteny in mixing hamber (.75 to 6.6 grams of powder per seond). High speed, heavy-duty whipper for omplete produt mixing. Front of mahine aess to tank drain for easy servie. Key lok on the door prevents tampering. FMD-4 Dimensions: 29.3 H x 18.6 W x 21.2 D (74.4 m H x 47.2 m W x 53.8 m D) FMD-5 Dimensions: 29.3 H x 18.6 W x 21.2 D (74.4 m H x 47.2 m W x 53.8 m D) For urrent speifiation sheets and other information, go to www.bunn.om. Related Produts Easy Clear EQHP-10 Produt No. : 39000.0004 Features deluxe whipper hambers: 1. Robust whipper to ensure full flavor yield. Single hopper model shown. Easy Clear EQHP-10L Produt No. : 39000.0001 2. Speially designed self leaning mixing hamber. 3. Exhaust fan to siphon off moisture that an ause powder buildup. Whipper Chamber Reeptale O-ring Steam Colletor Mixing Chamber 4. Hot water dispense for easy lean-out. 5. Quik disonneting parts for thorough sanitizing. RELEASE BUTTON WHEN CUP IS 2/3 FULL PLACE CUP HERE Frother Whipper Chamber Dispense Tip Model FMD-5 FMD-4 E9005.0004C Ageny Listing Item: 39 Patents Apply 12/06 Quantity: D4.1 1
Dimensions & Speifiations Model Produt # Volts Amps Tank Heater Total Capaity Cubi Shipping Cord Watts Watts Measure Weight Attahed FMD-4 34900.0002 120 15 1700 1800 4.2 gal/hr** 11 ft 3 118 lbs. Yes* FMD-5 34900.0000 120 15 1700 1800 4.2 gal/hr** 11 ft 3 123 lbs. Yes* *Power ord (NEMA 5-15P) 15 Amp-120V mahine only. **Based on inoming water temperature of 50 o F/10 C. Eletrial: 120V model requires 2-wires plus ground servie rated 120V, single phase, 60 hz. 120/240V model requires 3-wires plus ground servie rated 120/208 or 120/240V, single phase, 60Hz. Plumbing: 20-100 psi (138-690 kpa) from a 3 8 or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to redue it to 50 psi. Supplied with 3 8 male flare fitting. 19.30 FRONT VIEW 19.30 FMD-4 FMD-5 1.50 SIDE VIEW 21.15 BACK VIEW 18.60 17.68 18.50 29.26 25.26 4.00 14.66 15.68 1.75 ADJ. BUNN Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 800-637-8606 217-529-6601 Fax 217-529-6644 www.bunn.om Item: 39 BUNN praties ontinuous produt researh and improvement. We reserve the right to hange speifiations and produt design without notie. Suh revisions do not entitle the buyer to orresponding hanges, improvements, additions or replaements for previously purhased equipment. Quantity: 1 All dimensions shown in inhes. Bunn Corporation owns all opyrights relating to materials in this publiation. Please ontat Bunn Corporation to request permission to reprodue any portion of this publiation.
ZG9500 Combo-Serve ZGUARD Projet Name: Item: Quantity: Model: ZG9500 Length: NSF LISTED FINISH OPTIONS Brushed Aluminum Blak Polished Brass Finish Polished Chrome Smoked Copper Wrinkle Blak NSF LISTED LUSTER RAIL TM POWDER COAT FINISH OR CUSTOM COLORS Call your loal sales representative for a omplete list of Luster Rail olors or Custom Color Ordering Details. Other Options End Panels Right Left Both Available Mounting Options SEE MOUNTING OPTIONS SHEET FOR MOUNTING DETAILS Surfae Mount: Stainless Steel Counter SS1: EZ Mount Narrow Flange (Not for offset top shelf) SS2: EZ Mount Heavy Duty Flange Under Counter Mount: Stainless Steel Counter (Requires Underounter Reinforement & Aess) SSU3: Heavy Duty Flange or Narrow Flange SSU4: F-Mount (Not reommended for Solid Surfaes) SSU5: Heavy Duty Flange/Inverted or Narrow Flange Surfae Mount: Millwork Counter MW1: Heavy Duty Flange (Required with offset top shelf) MW2: Narrow Flange (Not for offset top shelf) Under Counter Mount: Millwork Counter MWU3: Narrow Flange/Inverted MWU4: F-Mount (Not reommended for Solid Surfaes) MWU5: Heavy Duty Flange/Inverted 14" 1" Glass Options 1/4" Tempered Glass (Not for shelves) Centerline Max 54" 3/8" Tempered Glass (For shelves or spans greater than 54") Centerline Max 66" *Approval Drawings Required Revision 3.0 Patent Number 6,588,863 Speifiations subjet to hange without notie. Printed in the U.S.A. (January 2008) Brass Smith, LLC w w w. bra s s s mi t h.o m 38 80 Ho ll y S t re et D e n v e r, Co lo ra do 8020 7 O ffi e : 30 3.331.8 777 Fa x: 303.3 31.844 4 Item: 40 Quantity: 1
DROP-IN SERVING EQUIPMENT COLD PAN (3 Reessed Top) Refrigerated, with Side Coils Self-Contained or Remote Item No. Quantity RM-1 RM-2 RM-3 RM-4 RM-5 RM-6 RMX-1 RMX-2 RMX-3 RMX-4 RMX-5 RMX-6 RM-4 SHOWN DESCRIPTION: The RM series refrigerated old pan eliminates the mess and expense of ie in your old food displays. In addition, this old pan, 9 deep, has opper tubing wrapped around its side walls to meet the stritest health department odes. The drop-in pan an be installed in virtually any ounter and an be provided as fully self-ontained - just plug it in and turn it on - or remote, where there's a need to loate the ompressor at a different loation. The pan is fully insulated for maximum effiieny and energy savings, and is provided with a fatory applied gasket so that is an be installed in the finest wood fixtures without marring the ounter top. The pan is onstruted of stainless steel and is provided with a 3/4 stainless steel drain. The old pan aommodates standard 12" x 20" pans, perfet for any old food serving appliation. FEATURES: g Refrigerated opper tubing around all sides Meets your toughest health department standards g Fully insulated for maximum effiieny and energy savings g Fatory applied gasket - makes installation a snap and seals units to the ounter top, thus eliminating seepage g Utilizes standard 12 x 20 pans, 2-1/2, or 4 deep or frational size pans with the use of adapter bars g Classified NSF Standard 7 by UL a subsidiary of Merury Airraft 1135 NW 159 Dr., Miami, Florida 33169 Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475 Item: 43 Quantity: 1 SS-13-A
COLD PAN Refrigerated, with Side Coils Self-Contained or Remote MODEL PAN OPENINGS A PAN SIZE ELECTRICAL CHARACTERISTICS CUT-OUT REQUIRED RM WEIGHT REMOTE* REFRIGERATION MODEL RMX LESS COMP. RM-1 1 18-1/4 19-7/8 X 11-7/8 X 9 3.0 amps. - 120V 1/5 HP 24-1/2 X 16-1/2 146 RMX-1 85 RM-2 2 32 19-7/8 X 25-5/8 X 9 6.0 amps. - 120V 1/4 HP 24-1/2 X 30-1/4 205 RMX-2 140 RM-3 3 45-3/4 19-7/8 X 39-3/8 X 9 6.0 amps. - 120V 1/4 HP 24-1/2 X 44 250 RMX-3 185 RM-4 4 59-1/2 19-7/8 X 53-1/8 X 9 7.8 amps. - 120V 1/3 HP 24-1/2 X 57-3/4 280 RMX-4 215 RM-5 5 73-1/4 19-7/8 X 66-7/8 X 9 10.7 amps. - 120V 1/2 HP 24-1/2 X 71-1/2 305 RMX-5 240 RM-6 6 87 19-7/8 X 80-5/8 X 9 10.7 amps. - 120V 1/2 HP 24-1/2 X 85-1/4 370 RMX-6 300 ** Remote refrigeration does not inlude ompressor. A Removable separator hannels 22 1/8 ID 13 1/8 26 1/4 13 1/8 10 1/2 13 3 6 2 B C D RM-1 6 18 13 3/4 RM-2 7 21 1/2 21 5/8 RM-3 7 21 1/2 21 5/8 RM-4 7 21 1/2 21 5/8 S/S Inserts Plan View B C Elevation D End View RM-5 7 21 1/2 21 5/8 RM-6 7 21 1/2 21 5/8 SPECIFICATIONS: TOP: Construted of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the ounter top, thus preventing seepage or marring of the ounter top. LINER: The inner liner shall be 18 gauge, type 304 stainless steel with 3 reessed top, one piee onstrution, all welded, ground and polished to a uniform finish. All orners are oved with a minimum 1/4" radius. The liner has opper tubing firmly soldered to the top 3 of all sides. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided. INSULATION: The pan is fully insulated with high density polystyrene, 1" thik on all sides, 2" thik on the bottom and enlosed with a 22 gauge galvanized steel outer lines. The entire unit is removable without the use of tools. REFRIGERATION SYSTEM: The ompressor housing shall be fabriated from formed angles /and bolted to the base of the unit. A fully self-ontained ondensing unit is provided with a hermetially sealed ompressor and a thermostat ontrol. The system is fully harged with HFC free refrigerant and ready to operate. NOTE: Proper ventilation must be provided in ounter. ELECTRICAL: (RM series only) The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat swith and pilot light. A 6' long, 3- wire ord and plug (NEMA 5-15P) will be provided. Speifiations subjet to hange without notie. ACCESSORIES: Remote swith Stainless steel adapter bars 5-year extended ompressor warranty Remote ompressor (hook-up in field by others) 1/5 HP for RM-1 1/4 HP for RM-2 & RM-3 1/3 HP for RM-4 1/2 HP for RM-5 1/2 HP for RM-6 Condensate evaporator SS-14-A a subsidiary of Merury Airraft 1135 NW 159 Dr., Miami, Florida 33169 Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475 Item: 43 Quantity: 1 01/10-SC
ITEM 44 RELATED EQUIPMENT PROVIDED BY OTHERS DESCRIPTION: POS Printers PROVIDED BY: INSTALLED BY: Owner Owner Vendor Vendor Caterer Caterer General Contrator General Contrator Plumbing Contrator Plumbing Contrator Eletrial Contrator Eletrial Contrator Ventilation Contrator Ventilation Contrator Kithen Equipment Contrator Kithen Equipment Contrator Millwork Contrator Millwork Contrator Item: 44 Quantity: 4
Projet Quantity Item # Model Speified: CSI Setion 11400 "W-Width" Reah-In Refrigerator Models/ Self-Contained INTELA-TRAUL Equipped! Model RHT232WUT-HHS (shown with optional asters) R SERIES Stainless Exterior & Interior A SERIES Stainless Exterior, Anodized Aluminum Interior One, Two & Three Setion Models, 32" Deep 1-Setion Full Length Door Model 2-Setion Full Length Door Model 3-Setion Full Length Door Model 1-Setion Half Length Door Model 2-Setion Half Length Door Model 3-Setion Half Length Door Model 1-Setion Full Length Door Model 2-Setion Full Length Door Model 3-Setion Full Length Door Model 1-Setion Half Length Door Model 2-Setion Half Length Door Model 3-Setion Half Length Door Model RHT132WUT-FHS RHT232WUT-FHS RHT332WUT-FHS RHT132WUT-HHS RHT232WUT-HHS RHT332WUT-HHS AHT132WUT-FHS AHT232WUT-FHS AHT332WUT-FHS AHT132WUT-HHS AHT232WUT-HHS AHT332WUT-HHS The R & A Series represent Traulsen's Top-of-the-Line produt offering. The W-Width reah-in refrigerator models are all designed to offer maximum interior storage apaity. Eah is supplied standard with suh high quality features as balaned refrigeration systems, miroproessor ontrols, ommuniations ability and stainless steel exteriors. Additionally, they offer the widest range of optional aessories to hoose from, and an be speified for use with many different appliations, inluding: Foodservie, Corretional, Institutional, Export, et. Standard Produt Features R-Series: Stainless Steel Exterior & Interior A-Series: Stainless Steel Exterior/Anodized Aluminum Interior INTELA-TRAUL Miroproessor Control System Balaned, Self-Contained Refrigeration System Using R-134a Sroll Blower Type Evaporator Fan Biased Return Air Dut Full or Half Length Stainless Steel Doors With Loks Self-Closing Doors With Stay Open Feature At 120 Degrees Guaranteed For Life Cam-Lift Hinges Guaranteed For Life Horizontal Work Flow Door Handle Standard Door Hinging: 132W = Right, 232W = Left/Right, 332W = Left/Right/Right (other hingings available) Automatially Ativated Inandesent Lights Stainless Steel Breaker Caps Three Adjustable Wire Shelves Per Setion, Supported On Shelf Pins (installed at the fatory) Automati Non-Eletri Condensate Evaporator Magneti Snap-In Door Gaskets Gasket Proteting Metal Door Liner Controllable Anti-Condensate Door Perimeter Heaters Thermostati Expansion Valve Metering Devie Stainless Steel One-Piee Louver Assembly 9' Cord & Plug Attahed Set of Four (4) 6" High Adjustable Stainless Steel Legs One Year Parts And Labor Warranty Two Year Control Warranty (parts and labor) Five Year Compressor Warranty Options & Aessories Stainless Steel Finished Bak With Rear Louvers No. 1 Type Tray Slides To Aommodate either (1) 18" x 26" or (2) 14" x 18" Pans No. 2 Type Tray Slides To Aommodate (1) 18" x 26" Pans No. 3 Type Tray Slides To Aommodate (2) 12" x 20" Pans No. 4 Type Tray Slides To Aommodate (1) 18" x 26" Sheet Pans (hrome rod type, equips 1/2 setion) Universal Type Tray Slides To Aommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans Additional Wire Shelves or Optional Stainless Steel Shelves Loking Hasps (padloks supplied by others) Optional 220/50/1 or 208/115/60/1 Voltages Kool Klad Exterior Laminate Deor Set of Four (4) 4-5/8" or 6" High Casters In Lieu of Legs Other Support Options: 4-1/2" High Base or 6" High Kikplate Remote Appliations (see form TR35837 for more details) Remote For Use With 20 F Glyol System Clear Glass Door(s) In Plae Of One Or More Solid Door(s) Two Year Servie/Labor Warranty Available Noted models are ENERGY STAR listed. Please refer to www.energystar.gov to view the most up-to-date produt listing and performane data. Listed by Underwriters Laboratories In., to U.S. and Canadian safety standards and Listed by NSF International. Approval: TRAULSEN 4401 BLUE MOUND RD. FT. WORTH, TX 76106 PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302 Website: www.traulsen.om Item: 45 Quantity: 2
Projet Quantity Item # Model Speified: CSI Setion 11400 Constrution, Hardware and Insulation Cabinet exterior front, one piee sides, louver assembly and doors are onstruted of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are onstruted of stainless steel (anodized aluminum in the A-Series). The exterior abinet top, bak and bottom are onstruted of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are inluded. Doors are equipped with a gasket proteting metal door pan, removable plug ylinder loks and guaranteed for life am-lift, gravity ation, self-losing metal, glide hinges with stay open feature at 120 degrees. Hinges inlude a onealed swith to automatially ativate the interior inandesent lighting. Guaranteed for life, work flow door handles are mounted horizontally over reess in door whih limits protrusion from door fae into aisleways. Doors have seamless, polished metal orners. Easily removable for leaning, vinyl magneti door gasket assures tight door seal. Anti ondensate heaters are loated behind eah door opening. Both the abinet and door(s) are insulated with an average of 2" thik high density, non-cfc, foamed in plae polyurethane. DIMENSIONAL DATA R/AHT132WUT R/AHT232WUT R/AHT332WUT Net apaity u. ft. 24.2 (686 u l) 51.6 (1462 u l) 79.0 (2238 u l) Length - overall in. 29 7 8 (75.9 m) 58 (147.3 m) 86 1 8 (218.8 m) Depth - overall in. 35 (88.8 m) 35 (88.8 m) 35 (88.8 m) Depth - less handle in. 33 3 4 (84.4 m) 33 3 4 (84.4 m) 33 3 4 (84.4 m) Depth - over body in. 32 (81.3 m) 32 (81.3 m) 32 (81.3 m) Depth - door open 90 in. 57 11 16 (146.5 m) 57 11 16 (146.5 m) 57 11 16 (146.5 m) Clear door width in. 21 1 8 (53.6 m) 21 1 8 (53.6 m) 21 1 8 (53.6 m) Clear half-door height in. 27 1 2 (69.9 m) 27 1 2 (69.9 m) 27 1 2 (69.9 m) Clear full-door height in. 57 5 8 (146.3 m) 57 5 8 (146.3 m) 57 5 8 (146.3 m) Height - overall on 6" legs 83 1 4 (211.5 m) 83 1 4 (211.5 m) 83 1 4 (211.5 m) RHT Net Wt. lbs. 1 380 (172 kg) 630 (286 kg) 880 (399 kg) AHT Net Wt. lbs. 1 330 (150 kg) 550 (249 kg) 760 (345 kg) No. Standard Shelves 3 6 9 Shelf area sq. ft. 2 18.8 (1.75 sq m) 37.6 (3.49 sq m) 56.4 (5.23 sq m) ELECTRICAL DATA Voltage 115/60/1 115/60/1 115/60/1 Feed wires with Ground 3 3 3 Full load amperes 7.0 8.2 11.8 REFRIGERATION DATA Refrigerant R-134a R-134a R-134a BTU/HR H.P. 3 22400 ( 1 3 HP) 4610 ( 5 8 HP) 4900 ( 3 4 HP) NOTES NOTE: Figures in parentheses reflet metri equivalents. 1= For shipping weights and dimensions please refer to form TR35875. 2= Area of standard shelf ompliment only, does not inlude storage area of additional shelves or available on abinet bottom. 3= Based on a 90 degree F ambient and 20 degree F evaporator. For information on remote models, please refer to form TR35837. Speifiations Refrigeration System A top mounted, self-ontained, balaned refrigeration system using R-134a refrigerant is onveniently loated behind the one piee louver assembly. It features an easy to lean front faing ondenser, thermostati expansion valve, air-ooled hermeti ompressor, plenum effet blower oil, large, high humidity evaporator oil loated outside the food zone and a top mounted non-eletri ondensate evaporator. Biased return air dut protets against introdution of warm kithen air, promoting even temperature maintenane and effiient operation. A 9' ord and plug is provided. Standard operating temperature is 34 to 38 F. Controller The easy to use water resistant INTELA-TRAUL miroproessor ontrol system is supplied standard. Unit is NAFEM Data Protool ommuniation (NDP) ready. Optional hardware required to be NDP ompliant. Third party software required for network onnetion. It inludes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Sale Display Capability, and an RS485 data port. In addition it inludes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Disharge Line Sensor Failures, and Power Supply Interruption. Interior Standard interior arrangements inlude three (3) wire shelves per setion, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Reommended load limit per shelf should not exeed 225 lbs. Optional tray slides may be purhased in ombination with, or in lieu of these. Both standard and optional interior arrangements are ompletely installed at the fatory. Warranties Both a one year parts and labor warranty and a five year ompressor warranty (self-ontained models only) are provided standard. An optional 2 nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL ontrol is warranted by a two year parts and labor warranty. Elevation - R/AHT132WUT Elevation - R/AHT232WUT Elevation - R/AHT332WUT Equipped With One NEMA 5-15 P Plug NOTE: Full load amps and plug style may vary depending on eletrial options hosen and ondensing unit employed. Plan - R/AHT132WUT Plan - R/AHT232WUT REQUIRED CLEARANCES In order to assure optimum performane, the ondensing unit MUST have an adequate supply of air for ooling purposes. Therefore, the operating loation must either have a minimum of 12 learane overhead of the ondensing unit or allow for unrestrited air flow at the bak of the unit. Clearane of at least 12 above is required in order to perform ertain maintenane tasks. NOTE: When ordering please speify: Voltage, Hinging, Door Size, Options and any additional warranties. Continued produt development may neessitate speifiation hanges without notie. Part No. TR35755 (revised 12/10) Plan - R/AHT332WUT Setion - All Models TRAULSEN 4401 BLUE MOUND RD. FT. WORTH, TX 76106 PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302 Website: www.traulsen.om Item: 45 Quantity: 2
2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE Parts Dept. Fax# (636)272-9471 www.truemfg.om Model: TSSU-48-18M-B-ADA TRUE FOOD SERVICE EQUIPMENT, INC. Projet Name: Loation: Item #: Model #: Qty: Food Prep Table: ADA Compliant Mega-Top Solid Door Sandwih Salad Unit AIA # SIS # TSSU-48-18M-B-ADA 3" (77 mm) diameter stem astors standard. Work surfae 34" (864 mm) high to omply with the Amerians with Disabilities At (ADA) requirements. Oversized, environmentally friendly (134A), patented foredair refrigeration system holds 33 F to 41 F (.5 C to 5 C). Complies with and listed under ANSI/NSF-7-1997-6.3. All stainless steel front, top and ends. Mathing aluminum finished bak. Stainless steel, patented, foam insulated lid and hood keep pan temperatures older, lok in freshness and minimize ondensation. Removable for easy leaning. 8 7/8" (226 mm) deep full length removable utting board inluded. Sanitary, high density, NSF approved white polyethylene provides tough preparation surfae. Foamed-in-plae using Eomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Heavy duty PVC oated wire shelves. Rough-In Data Speifiations subjet to hange without notie. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Shelves Pans (top) Cabinet Dimensions (inhes) (mm) L D H* Counter Height HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) Crated Wt. (lbs.) (kg) TSSU-48-18M-B-ADA 2 4 18 483/8 341/8 403/8 34 1/3 115/60/1 8.6 5-15P 7 N/A 1229 867 1026 1/3 230-240/50/1 4.2 2.13 N/A Depth does not inlude 1" (26 mm) for rear bumpers. * Height does not inlude 4" (1102 mm) for astors. Plug type varies by ountry. TRUE REFRIGERATION MADE IN U.S.A. SINCE 1945 5/10 Printed in U.S.A. Approvals: Available At: Item: 47 Quantity: 3
Model: Food Prep Table: TSSU-48-18M-B-ADA ADA Compliant Mega-Top Solid Door Sandwih Salad Unit Standard Features DESIGN True s salad/sandwih units are designed with enduring quality that protets your long term investment. True s ommitment to using the highest quality materials and oversized refrigeration systems provides the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. REFRIGERATION SYSTEM Self-ontained, fatory pre-engineered apillary tube system using environmentally friendly (CFC free) 134A refrigerant. Oversized, fatory balaned refrigeration system with guided airflow to provide uniform temperature in food pans and abinet interior. Patented fored-air design holds 33 F to 41 F (.5 C to 5 C) produt temperature in food pans and abinet interior. Complies with and listed under ANSI/NSF-7-1997-6.3. Sealed, ast iron, self-lubriating evaporator fan motor(s) and larger fan blades give True underounter units a more effiient, low veloity, high volume airflow design. Condensing unit aess in bak of abinet, slides out for easy maintenane. CABINET CONSTRUCTION Exterior - stainless steel front, top and ends. Mathing aluminum finished bak. Interior - attrative, NSF approved, white aluminum liner. 300 series stainless steel floor with oved orners. Insulation - entire abinet struture and solid doors are foamed-in-plae using Eomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). 3" (77 mm) diameter stem astors. 34" (864 mm) work surfae height. Plan View Cubi Feet/Liters 12/340 * Based on ANSI/AHAM HRF-1-2004 DOORS Stainless steel exterior with white aluminum liner to math abinet interior. Eah door fitted with 12" (305 mm) long reessed handle that is foamed-in-plae with a sheet metal interlok to ensure permanent attahment. Positive seal self-losing doors with 90 stay open feature. Doors swing within abinet dimensions. Magneti door gaskets of one piee onstrution, removable without tools for ease of leaning. SHELVING Shelf support pilasters made of same material as abinet interior; shelves are adjustable on1/2" (13 mm) inrements. DRAWER PAN CAPACITY Comes standard with 18 ( 1/6size) 67/8"L x 61/4 W x 4"D (175 mm x 159 mm x 102 mm) lear polyarbonate, NSF approved, food pans in ountertop prep area. Also aommodates 6" (153 mm) and 8" (204 mm) deep food pans (supplied by others). Countertop pan opening designed to fit varying size pan onfigurations with available pan divider bars. Pans supplied by others. MODEL FEATURES Evaporator is epoxy oated to eliminate the potential of orrosion. 87/8" (226 mm) deep full length removable utting board inluded. Sanitary, high-density, NSF approved white polyethylene provides tough preparation surfae. Stainless steel, patented, foam insulated lid(s) and hood keep pan temperatures older, lok in freshness and minimize ondensation. Removable for easy leaning. NSF-7 ompliant for open food produt. ELECTRICAL Unit ompletely pre-wired at fatory and ready for final onnetion to a 115/60/1 phase, 15 amp dediated outlet. Cord and plug set inluded. OPTIONAL FEATURES/ACCESSORIES Upharge and lead times may apply. 230-240V / 50 Hz. Barrel loks (fatory installed). Requires one per door. Additional shelves. Single overshelf. Double overshelf. Flat lid. Sneezeguard. 87/8" (226 mm) deep,1/2" (13 mm) thik, omposite utting board. Crumb ather. Requires rumb ather utting board for proper installation. Pan dividers. Exterior retanglular digital temperature display (fatory installed). Standard height unit with 5" (127 mm) diameter astors. 36" (915 mm) work surfae height. WARRANTY One year warranty on all parts and labor and an additional 4 year warranty on ompressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D TSSU-48-18M-B-ADA TFNY58E TFNY56S TFNY44P TFNY583 TRUE FOOD SERVICE EQUIPMENT Item: 47 2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl. Fax# (001)636-272-7546 www.truemfg.om Quantity: 3
402S Ovens Model: Speifiations: 402S Introduing the latest innovation in ventless aelerated ooking from Merryhef. How It Works: The onvetion fan pulls air in through the grease filter [1] whih removes the majority of partiulates from the air flow. The air is then heated and returned to the avity through the atalysts [2] and impingement plates [3] to produe an even heat pattern in the oven. This heat layout minimizes the area where grease an build up, allowing food to ook evenly to produe a risp, golden finish. The unit inludes built-in atalyti onverters eliminating the need for a ventilation hood. A standard metal baking tray an be used. Oven ontrols allow multi-stage programming. Eah program offers up to six stages eah with its own time, fan speed and mirowave power settings. The Merryhef MenuKey allows the user to upload and download new programs. A hange of menu ould be implemented simultaneously in remote sites using this feature. Standard Features: Mirowave-aelerated high-speed impinged hot air oven; ooks up to 15x faster than onventional onvetion ovens. MenuKey feature is standard, whih allows you to program up to 256 menu items. Ventless ooking apability through built-in atalyti onverter with full protein apability. Merryhef tehnology allows use of metal ookware inside the oven, even when mirowaves are used. Save time and money by using existing ookware. Touh Panel Controls provide aess to menu items diretly from the ontrol panel for fast, easy operation. Customizable with ions and graphis. Removable top and bottom impingement plates for onvetion-only appliations. Options & Aessories Rak Cool Down Pan Oven Cleaner Oven Protetor MenuKey Griddle Pan Bread Basket Pizza Paddle Grill Pan Set Complies with ANSI standard. Center for Devies and Radiologial Health Complies with regulation FCC18 Complies with CAN/CSA-C22.2 No 150-M89. 402S Ovens Model: 402S Merryhef U.S.A. 1111 North Hadley Road Fort Wayne, Indiana 46804 Tel 1.877.404.6872 Fax 1.800.285.9511 E mail info@merryhefusa.om www.merryhefusa.om Item: 48 Quantity: 5
Dimensions: (in/mm) Dimensions: Model No. 402S Oven Cavity Dimensions Width: 14.72 (374 mm) Allow a minimum of 1.96 (50 mm) learane to side and rear to allow air to irulate freely. Speifiations are subjet to hange without notie. Height 23.42 (595 mm) Over All Size Width 23.03 (585 mm) Power Requirements: Power input 6.25kW maximum Eletrial Supply Platform Depth 25.96 (660 mm) Net Weight 198 lbs. (90 kg) Model Voltage Phase Connetion Watts Hz 402S 208 Single NEMA L6-30p 1500 60 402S 240 Single NEMA L6-30p 1500 60 402S 220 Single NEMA L6-30p 1500 60 402S 220 Single NEMA L6-30p 1500 50 Conveted Heat: 3250 Watts Heating Element dereasing to 2500 Watts in Combination mode. Temperature settings from 300 F (149 C) to 525 F (274 C) in 33.8 F (1 C) steps. Mirowave Power: Output 1500 Watts (IEC705) @ 100%. Safety System Ageny approved monitored interlok door system. Constrution: Stainless Steel Installation Information: Away from major heat soure. Plae on a flat surfae suitable for weight. Allow a minimum of 1.93 (50 mm) learane to sides and rear to allow air to irulate freely. Allow suffiient learane to the front of the oven for the door to open fully. Merryhef Guarantee: Merryhef USA, warrants this produt to be free from defets in material and workmanship for a period of one (1) year from the date the produt is installed or eighteen (18) months from the date of shipment from our faility, whihever omes first. For further information on Merryhef produts and servie or advie on whih mahine suits you best please ontat your sales representative or visit our website at www.merryhefusa.om. 402S Ovens Model: 402S Merryhef U.S.A. Montlair 1111 North Hadley State Road University Fort Wayne, Indiana 46804 Tel: 1.877.404.6872 Fax: 1.800.285.9511 E mail info@merryhefusa.om web www.merryhefusa.om 2008 Merryhef USA, LLC. Printed in the U.S.A. 2101-2.5M-06/08-IH Item: 48 Quantity: 5
DROP-IN SERVING EQUIPMENT HOT PAN Eletrially Heated Individual Control Optional Drain and Manifold Item No. Quantity WIH-1 WIH-2 WIH-3 WIH-4 WIH-5 WIH-6 WIH-3 SHOWN DESCRIPTION: The WIH series hot pan is an eletrially heated drop-in serving unit that provides the onveniene on individually ontrolled hot food wells, designed for standard 12 x 20 steam table pans. The pan onstrution enables the unit to be used either wet or dry and an be speified with drains or a omplete drain manifold. The entire hot is effiiently insulated and provided with a fatory applied gasket so that it an be installed in the finest wood fixtures without marring the ounter top. All ontrols are prewired to a single ord and plug and an apron mounted remote ontrol panel is optional. FEATURES: g Effiiently insulated to retain heat - protets fixtures and saves energy g Individual thermostat ontrols - the operator an ontrol the temperature of eah well separately g Fatory applied gasket - makes installation a snap and seals units to the ounter top, thus eliminating seepage g Aommodates standard 12 x 20 pans, or frational size pans g NSF ertified; UL reognized a subsidiary of Merury Airraft 1135 NW 159 Dr., Miami, Florida 33169 Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475 Item: 49 Quantity: 1 SS-3
24 HOT PAN Eletrially Heated Individual Control MODEL A HOT FOOD WELLS CUT-OUT REQUIRED SHIP WT. (lbs.) WIH-1 16 1 22-1/4 X 14-1/4 40 WIH-2 29-3/4 2 22-1/4 X 28 94 WIH-3 43-1/2 3 22-1/4 X 41-3/4 130 WIH-4 57-1/4 4 22-1/4 X 55-1/2 160 WIH-5 71 5 22-1/4 X 69-1/4 190 WIH-6 84-3/4 6 22-1/4 X 83 260 Note: Drain Loation in A orner of pan. MODEL WIH-1 WIH-2 WIH-3 WIH-4 WIH-5 WIH-6 ELECTRICAL CHARACTERISTICS VOLTAGE/KW/AMPS 120V - 1.0 KW - 8.3 208V - 1.0 KW - 4.8 240V - 1.0 KW - 4.2 120V - 1.7 KW - 14.2 208V - 1.7 KW - 8.2 240V - 1.7 KW - 7.1 208V - 2.55 KW - 12.3 240V - 2.55 KW - 10.6 208V - 3.4 KW - 16.4 240V - 3.4 KW - 14.2 208V - 4.25 KW - 20.4 240V - 4.25 KW - 17.7 208V - 5.1 KW - 24.5 240V - 5.1 KW - 21.3 NEMA CONFIGURATION 5-15P 6-15P 6-15P 5-20P 6-15P 6-15P L6-20P 6-15P L6-30P L6-20P L6-30P L6-30P 6-50P L6-30P Note: 1000 WATT heating elements are available. CHANGE IN ELECTRICAL required - CONTACT FACTORY. Plan View 19 7/8 ID 9 6 ID 3 3/4 7 1/2 5 1/4 2 1/8 Elevation End View SPECIFICATIONS: TOP: Construted of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the ounter top, thus preventing seepage or marring of the ounter top. HOT FOOD WELLS: Individual hot food wells shall be 18 gauge type 304 stainless steel, one piee onstrution, all welded, ground and polished to a uniform finish. All orners are oved with a minimum 1/4 radius. Eah well is provided with an 850 watt heating element (1000 watt on the WIH-1). INSULATION: The pan is fully insulated with high density polystyrene, 1 thik on all sides, 2 thik on the bottom and enlosed with a 22 gauge galvanized steel outer liner. The entire unit is removable without the use of tools. ELECTRICAL: The unit is provided with an individual thermostat ontrol with a pilot light for eah well. All heating elements and ontrols are pre-wired, and a 6 long, 3-wire ord and plug is provided, extending from the ontrol box loated under the unit, on operator s left. Available for single phase power only. Speifiations subjet to hange without notie. ACCESSORIES: Individual drain and valve for eah well (add-d to model number) Individual drain for eah well with manifold to single valve (add-d+m to model number) Additional valves may be speified - CONTACT FACTORY Stainless steel adapter plate - speify openings (see page SS-29) 1000 watt heating elements in lieu of 850 watt elements. Change in eletrial required - CONTACT FACTORY * Apron mounted remote ontrols, CONTACT FACTORY for opening size * Rear drain extension Remote swith AF-Automati Water Fill Note: Units with these aessories * are not urrently UL listed SS-4 a subsidiary of Merury Airraft 1135 NW 159 Dr., Miami, Florida 33169 Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475 Item: 49 Quantity: 1 09/09-SC
2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE Parts Dept. Fax# (636)272-9471 www.truemfg.om Model: TRCB-72 TRUE FOOD SERVICE EQUIPMENT, INC. Chef Base: Drawered Refrigerator Projet Name: Loation: Item #: Model #: Qty: AIA # SIS # TRCB-72 True s refrigerated hef bases are designed with enduring quality that protets your long term investment. Designed using the highest quality materials and omponents to provide the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. Oversized, environmentally friendly (134A) fored-air refrigeration system holds 33 F to 38 F (.5 C to 3.3 C). Cabinet top is one piee, heavy duty reinfored 300 series stainless steel. Drip resistant V edge protets against spills. Supports up to 1084 lbs. (492 kg). All stainless steel front, top and sides. Mathing aluminum finished bak. Eah drawer aommodates two (2) full size 12"L x 20"W x 4"D (305 mm x 508 mm x 102 mm) food pans (sold separately). Heavy-duty stainless steel drawer slides and rollers. Removable without tools for easy leaning. Foamed-in-plae using Eomate. A new, innovative, high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Rough-In Data Speifiations subjet to hange without notie. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Drawers Cabinet Dimensions (inhes) (mm) L D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) TRCB-72 4 723/8 321/8 203/8 1/3 115/60/1 9.9 5-15P 7 450 1839 816 518 1/3 230-240/50/1 4.2 2.13 205 Depth does not inlude 1" (26 mm) for rear bumpers. * Height does not inlude 5" (127 mm) for astors or 6" (153 mm) for optional legs. Plug type varies by ountry. Crated Weight (lbs.) (kg) Approvals: Available At: Printed in U.S.A. Item: 51 Quantity: 1
Model: TRCB-72 Chef Base: Drawered Refrigerator Standard Features DESIGN True s ommitment to using the highest quality materials and oversized refrigeration systems provides the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. REFRIGERATION SYSTEM Fatory engineered, self-ontained, apillary tube system using environmentally friendly (CFC free) 134A refrigerant. Oversized, fatory balaned refrigeration system with guided airflow to provide uniform produt temperatures. Extra large evaporator oil balaned with higher horsepower ompressor and large ondenser; maintains abinet temperatures of 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Sealed, ast iron, self-lubriating evaporator fan motor(s) and larger fan blades give True hef base units a more effiient, low veloity, high volume airflow design. This unique design ensures faster temperature reovery and shorter run times in the busiest of food servie environments. Condensing unit aessed from behind side grill; slides out for easy maintenane. CABINET CONSTRUCTION Exterior - stainless steel front, top and sides. Mathing aluminum finished bak. Interior - attrative, NSF approved, white aluminum liner. 300 series stainless steel floor with oved orners. Insulation - entire abinet struture and drawer faings are foamed-in-plae using Eomate. A new, innovative, high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). 4" (102 mm) diameter plate astors - loks provided on front set. Cabinet top is one piee, heavy duty reinfored 300 series stainless steel. Drip resistant V edge protets against spills. Supports up to 1084 lbs. (492 kg). DRAWERS Stainless steel exterior drawer faings and liners. Stainless steel drawer frames. Eah drawer fitted with 12" (305 mm) long reessed handle that is foamed-in-plae with a sheet metal interlok to ensure permanent attahment. Heavy-duty stainless steel drawer slides and rollers. Removable without tools for easy leaning. Magneti drawer gaskets of one piee onstrution, removable without tools for ease of leaning. Eah drawer aommodates two (2) full size 12"L x 20"W x 4"D (305 mm x 508 mm x 102 mm) food pans (sold separately). Drawers support a wide variety of inremental pan size onfigurations; eah drawer standard with one (1) full length removable divider bar. MODEL FEATURES Evaporator is epoxy oated to eliminate the potential of orrosion. Exterior digital temperature display. NSF-7 ompliant for open food produt. ELECTRICAL Unit ompletely pre-wired at fatory and ready for final onnetion to a 115/60/1 phase, 15 amp dediated outlet. Cord and plug set inluded. RECOMMENDED OPERATING CONDITIONS Counter-top ooking equipment should be used in onjuntion with the manufaturer supplied legs. Minimum learane of 4" (102 mm) is required between bottom of ooking equipment heating element and the TRCB top. Failure to provide learane voids manufaturer warranty. OPTIONAL FEATURES/ACCESSORIES Upharge and lead times may apply. 230-240V / 50 Hz. 6" (153 mm) standard legs (1 set of 6 leg mounting plates required). 6" (153 mm) seismi/flanged legs (1 set of 6 leg mounting plates required). Heavy duty, 16 gauge top. Flat top (no marine edge). Additional size drawer divider bars. Remote abinets (ondensing unit supplied by others; system omes standard with 404A expansion valve and requires R404A refrigerant). Consult fatory tehnial servie department for BTU information. All remote units must be hard wired during installation. Plan View WARRANTY One year warranty on all parts and labor and an additional 4 year warranty on ompressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Bak TRCB-72 TFQY172E TFQY135S TFQY172P TFQY1723 TRUE FOOD SERVICE EQUIPMENT Item: 51 2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl. Fax# (001)636-272-7546 www.truemfg.om Quantity: 1
2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE Parts Dept. Fax# (636)272-9471 www.truemfg.om Model: T-23 TRUE FOOD SERVICE EQUIPMENT, INC. T-Series: Reah-In Solid Swing Door Refrigerator Projet Name: Loation: Item #: Model #: Qty: AIA # SIS # T-23 True s solid door reah-in s are designed with enduring quality that protets your long term investment. Designed using the highest quality materials and omponents to provide the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. Oversized, fatory balaned, refrigeration system holds 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Stainless steel solid door and front. The finest stainless available with higher tensile strength for fewer dents and srathes. Adjustable, heavy duty PVC oated shelves. Positive seal self-losing door. Lifetime guaranteed door hinges and torsion type losure system. Bottom mounted units feature: No stoop lower shelf. Storage on top of abinet. Compressor performs in oolest, most grease free area of kithen. Easily aessible ondenser oil for leaning. Rough-In Data Speifiations subjet to hange without notie. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Shelves Cabinet Dimensions (inhes) (mm) L D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) T-23 1 3 27 291/2 783/8 1/3 115/60/1 7.6 5-15P 9 280 686 750 1991 1/4 230-240/50/1 2.4 2.74 127 Crated Weight (lbs.) (kg) * Height does not inlude 5" (127 mm) for astors or 6" (153 mm) for optional legs. Plug type varies by ountry. TRUE REFRIGERATION MADE IN U.S.A. SINCE 1945 9/10 Printed in U.S.A. Approvals: Available At: Item: 52 Quantity: 1
Model: T-23 T-Series: Reah-In Solid Swing Door Refrigerator Standard Features DESIGN True s ommitment to using the highest quality materials and oversized refrigeration systems provides the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. REFRIGERATION SYSTEM Fatory engineered, self-ontained, apillary tube system using environmentally friendly (CFC free) 134A refrigerant. Extra large evaporator oil balaned with higher horsepower ompressor and large ondenser; maintains 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Sealed, ast iron, self-lubriating evaporator fan motors and larger fan blades give True reah-in s a more effiient low veloity, high volume airflow design. This unique design ensures faster temperature reovery and shorter run times in the busiest of food servie environments. Bottom mounted ondensing unit positioned for easy maintenane. Compressor runs in oolest and most grease free area of the kithen. Allows for storage area on top of unit. CABINET CONSTRUCTION Exterior - Stainless steel front. Anodized quality aluminum ends, bak and top. Interior - attrative, NSF approved, white aluminum liner. 300 series stainless steel floor with oved orners. Insulation - entire abinet struture and solid door are foamed-in-plae using Eomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, blak powder oated for orrosion protetion. Frame rail fitted with 4" (102 mm) diameter stem astors - loks provided on front set. DOOR Stainless steel exterior with white aluminum liner to math abinet interior. Door extends full width of abinet shell. Door loks standard. Lifetime guaranteed reessed door handle. Door fitted with 12" (305 mm) long reessed handle that is foamed-in-plae with a sheet metal interlok to ensure permanent attahment. Positive seal self-losing door. Lifetime guaranteed door hinges and torsion type losure system. Magneti door gasket of one piee onstrution, removable without tools for ease of leaning. SHELVING Three (3) adjustable, heavy duty PVC oated wire shelves 22 7/8"L x 23 1/4"D (582 mm x 591 mm). Four (4) hrome plated shelf lips inluded per shelf. Shelf support pilasters made of same material as abinet interior; shelves are adjustable on 1/2" (13 mm) inrements. LIGHTING Inandesent interior lighting - safety shielded. Lights ativated by roker swith mounted above door. MODEL FEATURES Exterior temperature display. Evaporator is epoxy oated to eliminate the potential of orrosion. NSF-7 ompliant for open food produt. ELECTRICAL Unit ompletely pre-wired at fatory and ready for final onnetion to a 115/60/1 phase, 15 amp dediated outlet. Cord and plug set inluded. OPTIONAL FEATURES/ACCESSORIES Upharge and lead times may apply. 230-240V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismi/flanged legs. Alternate door hinging (fatory installed). Additional shelves. Half door bun tray raks. Eah holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately). Full door bun tray rak. Holds up to twenty-two 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately). Remote abinets (ondensing unit supplied by others; system omes standard with 404A expansion valve and requires R404A refrigerant). Consult fatory tehnial servie department for BTU information. All remote units must be hard wired during installation. Plan View Cubi Feet/Liters 20.5/580 * Based on ANSI/AHAM HRF-1-2004 WARRANTY One year warranty on all parts and labor and an additional 4 year warranty on ompressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Bak T-23 TFEY53E TFEY03S TFEY03P TFEY633 TRUE FOOD SERVICE EQUIPMENT Item: 52 2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl. Fax# (001)636-272-7546 www.truemfg.om Quantity: 1
Item: 53 Quantity: 1
Item: 53 Quantity: 1
fi Star Manufaturing International, In. Features/Benefits: ULTRA-MAX THROTTLING GAS GRIDDLES Models 824T, 836T, 848T, 860T & 872T Thermostati ontrol with throttling thermostat adjusts from 150 to 450 F and provides aurate temperature ontrol of +/- 20 of set point. Internal plate sensor aurately measures the temperature of the griddle plate 3/16 from the ooking surfae for instant response to surfae temperature hange and fast reovery. Available in 24, 36, 48, 60 and 72 inh widths to meet your spae and volume requirements. Highly polished 1 thik steel plate for superior heat distribution, fast reovery and energy effiient operation. Custom designed 30,000 BTU steel burner every 12 of ooking surfae provides superior ooking performane. Heavy-duty all-weld body onstrution with stainless steel front, side panels, bull nose and splash guard. Euro-style design with stylishly urved, ergonomially advaned front panel providing easy aess and viewing of ontrols. Standing pilot light for onsistent performane. Spatula wide 3-1/2 front grease trough and grease hute for easier leaning. Large 6 quart stainless steel grease drawer. Extra-heavy 4 adjustable legs to fit your ountertop needs. Floor model stands available for free standing unit. Optional asters available. Model 848T Ultra-Max Gas Griddles Appliations: For breakfast, lunh or dinner, the Ultra-Max throttling thermostati griddles provide flexibilty for a variety of menu items. Perfet for high volume operators. Constrution: These griddles feature 1 thik highly polished steel griddle plate with 5 tapered stainless steel splash guard and 3-1/2 wide front aess grease trough with 6 quart grease drawer apaity. Models 860T and 872T house two 6 quart grease drawers. Inludes a 30,000 BTU aluminized steel burner every 12 of width ontrolled by throttling ontrol valve with standing pilot light, 3/4 N.P.T. male gas onnetion with onvertible pressure regulator, and 4 adjustable legs. These units are approved for installation within 6 of ombustible surfaes. Model 836T Shown with Floor Stand Warranty: Ultra-Max gas griddles are overed by Star s one year parts and labor warranty. Star Manufaturing International In. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800 Item: 54 Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.om S252/0012 Quantity: 1
Star Manufaturing International, In. Ultra-Max Gas Griddles ULTRA-MAX THROTTLING GAS GRIDDLES Models 824T, 836T, 848T, 860T & 872T A B C Speifiations Dimensions Model (A) (B) (C) No. Plate Approximate Weight No. Width Depth Height Controls BTU Grid Area Thikness Installed Shipping Inhes Inhes Inhes 824T 24" 32-3/8" 18" 2 60,000 573 sq. in. 1" 220 lbs. 246 lbs. (61 m) (82.2 m) (45.7 m) (3,697sq m) (2.54 m) (99.7 kg) (111.5 kg) 836T 36" 32-3/8" 18" 3 90,000 860 sq. in. 1" 330 lbs. 369 lbs. (91.4 m) (82.2 m) (45.7 m) (5,545 sq m) (2.54 m) (149.5 kg) (167.2 kg) 848T 48" 32-3/8" 18" 4 120,000 1146 sq. in. 1" 440 lbs. 492 lbs. (121.9m) (82.2 m) (45.7 m) (7,394 sq m) (2.54 m) (199.4 kg) (222.9 kg) 860T 60" 32-3/8" 18" 5 150,000 1433 sq. in. 1" 550 lbs. 615 lbs. (152.4 m) (82.2 m) (45.7 m) (9,242 sq m) (2.54 m) (249.2 kg) (278.7 kg) 872T 72" 32-3/8" 18" 6 180,000 1719 sq. in. 1" 660 lbs. 738 lbs. (182.9 m) (82.2 m) (45.7 m) (11,091 sq m) (2.54 m) (299.0 kg) (334.4 kg) Typial Speifiations Gas griddles are onstruted of stainless steel, valve knobs are proteted by a stainless steel bull nose front. Griddle plate is a 1 (2.54 m) thik highly polished steel plate with 5 (7.6 m) high tapered wrap-around stainless steel splash guard. Unit has 3-1/2 (8.3 m) wide front grease trough with grease hute and a 6 qt. (5.68 L) apaity stainless steel grease drawer. Models 860T and 872T house two eah 6 quart grease drawers. Units are equipped with a 30,000 BTU aluminized steel burner for every 12 (30.5 m) of width and are ontrolled by a throttling ontrol valve with a standing pilot light and 3/4 N.P.T. male gas onnetion with a onvertible pressure regulator. Griddles are supplied with 4 (10.2 m) high stainless steel legs that have a 1-5/8 (4.5 m) adjustment. Units are approved for installation within 6 (15.2 m) of ombustible surfaes and are ULus Classified and UL lassified to NSF Standard 4 Sanitation. Printed in the U.S.A. Star Manufaturing International In. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800 Item: 54 Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.om Quantity: 1
Item: 55 Quantity: 1
Item: 55 Quantity: 1
SOLSTICE Gas (SG) Series Single Standalone SG14, 14R, 14T, 18 Fryer SG14 SG14R with optional stainless tank SG14T Twin Tank SG18 with optional asters STANDARD FRYER FEATURES & ACCESSORIES Tank - mild steel onstrution Cabinet - stainless front, door and sides Solstie Burner Tehnology, No blower or eramis Millivolt Thermostat (T-Stat) 200ºF-400ºF (190ºC-93ºC CE) Themo-Safety pilot with built in regulator. High Temperature safety limit swith Heavy duty 3/16 bottom door hinge 1 ¼ (3.2 m) Full port drain valve for fast draining Separate Manual gas shutoffs, for front serviing Integrated flue defletor 9 (22.9m) adjustable legs, easier aess to lean Tube rak, allows rumbs & debris into ool zone Removable basket hanger, requires no tools Drain Line Clean out rod Drain extension Fryer leaner sample paket Choie of basket options : 2-Twin Baskets 1-Full Basket (not available on 14T) Projet Item No. Quantity APPLICATION For High Prodution Gas single standalone frying speify Pito Solstie Gas Models SG14, 14R, 14T or SG18 tube fryers with the patented Solstie Burner Tehnology. The dependable blower free atmospheri heating system provides fast reovery to ook a variety of food produts. The Solstie gas fryer omes standard with a millivolt thermostat with a thermo-safety pilot, high temperature safety limit swith. The unique Solstie burner and baffle design inreases ooking prodution, lowers flue temperature and improves working environment ompared to previous models. MODELS AVAILABLE SG14 (40-50 lbs, 14 x14 fry area, 110 Kbtu/hr) SG14R (40-50 lbs, 14 x14 fry area, 122 Kbtu/hr) SG14T (20-25 lbs, 7x 14, 50 Kbtu/hr per side for this twin tank fryer, 100 Kbtu/hr total) SG18 (70-90 lbs, 18 x 18 fry area, 140Kbtu/hr) ACCESSORIES (AT ADDITIONAL COST) Tank stainless steel Stainless Steel bak 9" (22.9 m) adjustable, non loking rear & front loking asters Flexible gas hose with disonnet and restraining able Tank over 3-Triple Baskets (not available on 14T) SOLSTICE GAS (SG) Series Single Standalone SG14, 14R, 14T, 18 Fryer Pito Frialator, In P.O. Box 501, Conord, NH 03302-0501 509 Route 3A, Bow, NH 03304 603-225-6684 FAX: 603-225-8497 www.pito.om Item: 56 Quantity: 2 L10-293 Rev 0 08/10 Printed in the USA
SOLSTICE GAS (SG) Series Single Standalone SG14, 14R, 14T, 18 Fryer SOLSTICE GAS (SG) Series Single Standalone SG14, 14R, 14T, 18 Fryer G 3/4 INCH GAS CONNECTION (CE 3/4 INCH BSP ADAPTOR ADDS 1 1/2 [3.8] TO CONNECTION) IN [CM] B G C 34 [86.3] 12 1 2 [31.7] A 9 [22.9] NOM. 34 15 32 [87.6] INTEGRAL FLUE DEFLECTOR 21 29 32 [55.6] G A B C SG14 (R) SG14T 48 5/16 [122.8] 15 5/8 [39.7] 4 1/4 [10.8] 11 16 [1.8] 10 1 2 [26.5] NOM. 1 13 32 [3.6] 4 3 8 [11.1] 46 1 8 [117.2] SG18 52 5/16 [132.9] 19 5/8 [49.8] 6 1/4 [15.9] INDIVIDUAL FRYER SPECIFICATIONS Model Frying Area Cook Depth Oil Capaity SG14 & 14R 14 x 14 in (35.6 x 35.6 m) 3-1/4-5 in (8.3-12.7 m) 40-50 Lbs (18-23 kg) SG14T per side 7 x 14 in (17.7 x 35.6 m) 3-1/4-5 in (8.3-12.7 m) 20-25 Lbs (9-11 kg) SG18 18 x 18 in (45.7 x 45.7 m) 3-1/4-5 in (8.3-12.7 m) 70-90 Lbs (31-40 kg) FRYER SHIPPING INFORMATION (Approximate) Model Shipping Weight Shipping Crate Size H x W x L Shipping Cube SG14 & 14R 208 Lbs (95 kg) 45 x 19 x 36 in (114.3 x 48.2 x 91.4 m) 17.8 ft 3. (0.5m 3 ) SG14T per side 230 Lbs (104 kg) 45 x 19 x 36 in (114.3 x 48.2 x 91.4 m) 17.8 ft 3. (0.5m 3 ) SG18 275 Lbs (124.5 kg) 45 x 23 x 38 in (114.3 x 58.4 x 96.5 m) 22.8 ft 3. (0.6m 3 ) INSTALLATION INFORMATION GAS SYSTEM REQUIREMENTS Gas Type Store Supply Pressure * Burner Manifold Pressure * Chek plumbing / gas odes for proper gas supply Natural Propane 7-10" w..(17.4 mbars/ 1.7 kpa) 11-13" w..(27.4 mbars/ 2.7 kpa) 4" w.. (10 mbars / 1 kpa) 10" w.. (25mbars/2.4 kpa) line sizing to sustain burner pressure when all gas applianes are full on. CLEARANCES (Do Not Curb Mount) Front min. Floor min. Combustible material Non-Combustible material Fryer Flue Area 30" 6" Sides min. Rear min. Sides min. Rear min. Do not blok / restrit flue gases from flowing into hood (76.2 m) (15.25 m) 6" (15.2m) 6" (15.2m) 0" 0" or install vent hood drains over the flue. SHORT FORM SPECIFICATION Provide Pito Solstie Gas Model (SG xxx) tube fired high prodution gas floor fryer. Fryer shall be xx-xx lbs oil apaity, xxx Kbtu/hr, xx by xx fry area, mild steel (or optional stainless) peened tank, stainless front, door, sides. Blower Free atmospheri burner system, with millivolt thermostat and thermo-safety pilot, separate gas shut off, 3/4" npt rear gas onnet, reessed abinet bak, 1-1/4" Full port drain, 3/16" bottom hinge. Provide options and aessories as follows: Pito Frialator, In P.O. Box 501, Conord, NH 03302-0501 509 Route 3A, Bow, NH 03304 Item: 56 603-225-6684 FAX: 603-225-8497 www.pito.om L10-293 Rev 0 08/10 Printed in the USA Quantity: 2 We reserve the right to hange speifiations without notie and without inurring any obligation for equipment previously or subsequently sold.
2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE Parts Dept. Fax# (636)272-9471 www.truemfg.om Model: T-23F TRUE FOOD SERVICE EQUIPMENT, INC. T-Series: Reah-In Solid Swing Door -10ºF Freezer Projet Name: Loation: Item #: Model #: Qty: AIA # SIS # T-23F True s solid door reah-in s are designed with enduring quality that protets your long term investment. Designed using the highest quality materials and omponents to provide the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. Extra large evaporator oil balaned with higher horsepower ompressor and large ondenser maintains -10 F (-23.3 C) abinet temperatures. Ideally suited for both frozen foods and ie ream. Stainless steel solid door and front. The very finest stainless with higher tensile strength for fewer dents and srathes. Adjustable, heavy duty PVC oated shelves. Positive seal self-losing door. Lifetime guaranteed door hinges and torsion type losure system. Automati defrost system time-initiated, temperature-terminated. Saves energy onsumption and provides shortest possible defrost yle. Bottom mounted units feature: No stoop lower shelf. Storage on top of abinet. Compressor performs in oolest, most grease free area of kithen. Easily aessible ondenser oil for leaning. Rough-In Data Speifiations subjet to hange without notie. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Shelves Cabinet Dimensions (inhes) (mm) L D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) T-23F 1 3 27 291/2 783/8 1/3 115/60/1 7.2 5-15P 9 275 686 750 1991 1/2 230-240/50/1 5.5 2.74 125 Crated Weight (lbs.) (kg) * Height does not inlude 5" (127 mm) for astors or 6" (153 mm) for optional legs. Plug type varies by ountry. TRUE REFRIGERATION MADE IN U.S.A. SINCE 1945 2/11 Printed in U.S.A. Approvals: Available At: Item: 58 Quantity: 1
Model: T-23F T-Series: Reah-In Solid Swing Door -10ºF Freezer Standard Features DESIGN True s ommitment to using the highest quality materials and oversized refrigeration systems provides the user with older produt temperatures, lower utility osts, exeptional food safety and the best value in today s food servie marketplae. REFRIGERATION SYSTEM Fatory engineered, self-ontained, apillary tube system using environmentally friendly (CFC free) R404A refrigerant. Extra large evaporator oil balaned with higher horsepower ompressor and large ondenser; maintains -10 F (-23.3 C). Ideally suited for both frozen foods and ie ream. Sealed, ast iron, self-lubriating evaporator fan motor(s) and larger fan blades give True reah-in s a more effiient low veloity, high volume airflow design. This unique design ensures faster temperature reovery and shorter run times in the busiest of food servie environments. Bottom mounted ondensing unit positioned for easy leaning. Compressor runs in oolest and most grease free area of the kithen. Allows for storage area on top of unit. Automati defrost system time-initiated, temperature-terminated. Saves energy onsumption and provides shortest possible defrost yle. CABINET CONSTRUCTION Exterior - Stainless steel front. Anodized quality aluminum ends, bak and top. Interior - attrative, NSF approved, white aluminum liner. Stainless steel floor with oved orners. Plan View Insulation - entire abinet struture and solid door are foamed-in-plae using Eomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, blak powder oated for orrosion protetion. Frame rail fitted with 4" (102 mm) diameter stem astors - loks provided on front set. DOOR Stainless steel exterior with white aluminum liner to math abinet interior. Door extend full width of abinet shell. Door lok standard. Lifetime guaranteed reessed door handle. Door fitted with 12" (305 mm) long reessed handle that is foamed-in-plae with a sheet metal interlok to ensure permanent attahment. Positive seal self-losing door. Lifetime guaranteed door hinges and torsion type losure system. Magneti door gasket of one piee onstrution, removable without tools for ease of leaning. SHELVING Three (3) adjustable, heavy duty PVC oated wire shelves 22 7/8"L x 23 1/4"D (582 mm x 591 mm). Four (4) hrome plated shelf lips inluded per shelf. Shelf support pilasters made of same material as abinet interior; shelves are adjustable on 1/2" (13 mm) inrements. LIGHTING Inandesent interior lighting - safety shielded. Lights ativated by roker swith mounted above door. MODEL FEATURES Exterior temperature display. Evaporator is epoxy oated to eliminate the potential of orrosion. Rear airflow guards prevent produt from bloking optimal airflow. NSF-7 ompliant for open food produt. ELECTRICAL Unit ompletely pre-wired at fatory and ready for final onnetion to a 115/60/1 phase, 15 amp dediated outlet. Cord and plug set inluded. OPTIONAL FEATURES/ACCESSORIES Upharge and lead times may apply. 230-240V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismi/flanged legs. Alternate door hinging (fatory installed). Novelty baskets. Additional shelves. Half door bun tray raks. Eah holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately) (airflow guards need to be removed). Full door bun tray rak. Holds up to twenty-two 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately) (airflow guards need to be removed). Remote abinets (ondensing unit supplied by others; system omes standard with 404A expansion valve and requires R404A refrigerant). Consult fatory tehnial servie department for BTU information. All remote units must be hard wired during installation. WARRANTY One year warranty on all parts and labor and an additional 4 year warranty on ompressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Bak T-23F TFEY53E TFEY03S TFEY03P TFEY633 TRUE FOOD SERVICE EQUIPMENT Item: 58 2001 East Terra Lane O Fallon, Missouri 63366 (636)240-2400 Fax (636)272-2408 (800)325-6152 Intl. Fax# (001)636-272-7546 www.truemfg.om Quantity: 1
FöD Tehnology Order Form Page 1 Front of the house Kiosk Options Quantity to Order Model Number Unit 0 EL19 EA 0? EA 3 BX EA 0? EA Produt Desription (Prie Inludes Hardware and Software) 19" Tabletop touh sreen LCD (16:9) Kiosk Integrated PC with Operating System Magneti Stripe Reader Epson TMT88 Thermal Printer Adjustable Stand inluded NEXTEP SYSTEMS Software Liense Dimensions: 18 x17 x10 Tabletop Kiosk Mounting Kits Kiosk mounts are available upon request. Nextep an generate a quote and provide the spe sheets for installation 19" Freestanding touh sreen LCD (4:3) Kiosk Enlosed PC with Operating System Powder Coated Steel Enlosure with Loks Full Color Front Graphi Vinyl Magneti Stripe Reader Enlosed 80mm Thermal Printer NEXTEP SYSTEMS Software Liense Dimensions: 54 x18 x21 Freestanding Kiosk Mounting Kit Kiosk mounts are available upon request. Nextep an generate a quote and provide the spe sheets for installation Front of the House Order Status monitors Quantity Model to Order Number Unit Produt Desription (Prie Inludes Hardware and Software) Order Status Monitor (OSM) 37 37 LCD Display 0 OSM 37 EA Mini PC with Operating System Mounting brakets and abling provided NEXTEP SYSTEMS Software Liense Dimensions: 37 x24 x8 Order Status Monitor (OSM) 42 42 LCD Display Mini PC with Operating System 1 OSM 42 EA Mounting brakets and abling provided NEXTEP SYSTEMS Software Liense Dimensions: 38.1 x22 x5 (Reommend Model to purhase) Order Status Monitor (OSM) 47 47 LCD Display Mini PC with Operating System 0 OSM 47 EA Mounting brakets and abling provided NEXTEP SYSTEMS Software Liense Dimensions: 44 x25 x5 (Reommend Model to purhase) Bak of the house Order Management System & Thermal Printers Quantity Model Unit Produt Desription (Prie Inludes Hardware and Software) to Order Number
FöD Tehnology Order Form Page 2 1 OMS 19 EA 0 Epson TMT88 EA Order Management System (OMS)19 Counter Top Kiosk 19 Touh Sreen LCD (16:9) Integrated PC with Operating System Magneti Stripe Reader Epson TMT88 Thermal Printer Adjustable Stand inluded NEXTEP SYSTEMS Software Liense Dimensions: 18 x17 x10 Epson USB onneted reeipt printer for Kithen Workstations 80mm Thermal Reeipt Printer Dimensions: 6 x 8 x 6 (W x D x H) 4 Epson TMT88 EA Epson Network IP onneted reeipt printer for Kithen Workstations 80mm Thermal Reeipt Printer Dimensions: 6 x 8 x 6 (W x D x H) 0? EA Epson Reeipt Printer Mounting kit Printer mounts are available upon request. Nextep an generate a quote and provide the spe sheets for installation Aessories Quantity Detail & Unit to Order 0 Offie Depot Item # 254311 (Case) Produt Desription Epson Thermal Reeipt Paper for the TMT88 series printer NCR Single Ply Thermal Paper Rolls, 3 1/8" x 230', White, Pak Of 50 Rolls 0 Offie Depot Item # 109282 (10pk) Epson Thermal Reeipt Paper for the TMT88 series printer Offie Depot Single Ply Thermal Paper Rolls, 3 1/8" x 230', White, Pak Of 10 Rolls Zebra TTP 2000 series Thermal Reeipt Paper for the KX model Kiosk 0 0 TTP 2000 (Case) Zebra Teh Item # 10007008 (Case) Paper width: 2.3"/58 mm, 2.4"/60 mm, 3.15"/80 mm, and 3.25"/82.5 mm Maximum media roll: 9.8"/250 mm / Media thikness: 0.002"/0.054 mm to 0.004"/0.1 mm 16 rolls per ase Zebra TTP 2000 series Thermal Reeipt Paper for the KX model Kiosk Z Perform 1000D 3.5 mm, 3.125 in x 645 ft., 1" ID, 6" OD 8 per Case Prie per ase $143.60 = Order 2 3 ases prie drops to $119.20 per ase NOTE: Paper must be ompatible with Zebra TTP 2000 Series printers Bak up Aessories Quantity Detail & to Order Unit Produt Desription Tripp Lite 7 Outlet Surge Protetor/Suppressor 7' Cord 2 EA Mfg. Part: SUPER7 CDW Part: 291101
FöD Tehnology Order Form Page 3 0 EA RECOMMENDED Tripp Lite 500VA Low Profile Tower UPS for Kiosk, POS, & PCs. Mfg. Part: POS500 CDW Part: 1396799 Nutritional Information Software Pakage Nutritional Information to be displayed for eah menu item. This feature is typially an add on feature but is inluded as part of the base line features. How it works is our student ustomers will be able to lik on the little "I" information bottom on the button right side of the menu item piture to view the Nutritional Information. Optional Modules Quantity to Order & Units 0 Model Number Pager Pakage Produt Desription Pager Notifiation Module: This feature will provide an interfae with the pager to the system. With this feature, when the expeditor loses out the tikets, the system will automatially send out a signal to the transmitter paging the ustomer notifying them that their meal is ready. 1 6 T1300 Bulldog 60 Coaster T1300 Bulldog 60 Coaster Charger Kit Charging stations T74C232 Transmitter 100 pager Coaster Pager Sold individually 0 2 Slot 3 4 Slot 0 Pkg. A 0 Pkg. B 2 Slot Wooden Coaster Holder Holds up to 30 Coasters No piture available 4 Slot Wooden Coaster Holder Holds up to 60 Coasters No piture available Speial Instrutions Keyboard: This feature will allow our student ustomers to use a eletroni key board (on the sreen) to make speial requests on their order (Saue on side, no butter on toast, et.). The speial instrutions keyboard is ativated by a button next to eah line item on order review and allows our student ustomer to enter text (18 haraters) for eah item that is passed to the ODS and kithen reeipt. Previous Orders Module: This feature will provide our student ustomers the ability to enters his/her phone number to display what the last three orders plaed. Our Student Customers will be able to either pik one of the past (Favorite) orders or ontinue on to plae a new order. Previous order with 86 ed/removed items will not display. The system is designed to filter previous orders so only orders that have 100% of their items available for purhase at that moment, even if the student ustomer omes bak a year later and the whole menu has hanged Total