Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Register issued on : 2011-12-06 A list of subsectors can be found at the end of this document.
Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector A : SERVICES Register issued on : 2011-12-06
Subsector A09: FACILITY MANAGEMENT Page 3 Subsector : A09 Registration Date : 2011-11-03 TSE Turkey Project ID : tst13260/0001 Project Established 03.080.30 Fuel storing and filling facilities General rules This standard includes the rules for structural characteristics, storage and safety distances, fire prevention and personnel characteristics of petroleum products storage and filling structures. This standard does not include the rules for LPG, LNG, compressed natural gas storage and filling structures and fuel stations and their tanks. Subsector A99: UNDETERMINED Subsector : A99 Registration Date : 2011-11-10 ASI Austria Project ID : 00024281/0001 Project Established 03.100.01, 13.310 ÖNORM S 2420 Corporate Security Management - Requirements for concepts for the protection of objects from intentional threats This standard is intended to serve as a standard for sustainable building security. As such, this standard also provides assistance in the identification, assessment and management of security risks for objects. Moreover, the standard describes the required procedure for the creation of concepts for the protection of objects from intentional threats. The degree of reaction depends on the structure and size of the standard-applying organization (adequacy analysis). To achieve the pursued objective of protection, use is made of technical, organizational and personnel measures. This standard relates to the protection of objects and includes physical goods (machinery, furniture, etc.). It also includes protecting the physical manifestation (disks, documents) of intangible assets (including the security concepts corresponding to this standard). The protection of data processed by machine, as well as any processes and security checks of persons are not part of the protection goals. This standard does not standardize data protection, fire protection, industrial safety, environmental protection and the handling of dangerous goods. Subsector : A99 Registration Date : 2011-11-17 TSE Turkey Project ID : t1012998/0001 Project Established 03.080.10 Work Places-Flower shops-general Rules This standard includes, general rules for managemenet, structural properties, personnel of flower shops
Page 4 Subsector : A99 Registration Date : 2011-11-23 TSE Turkey Project ID : tst11680/0001 Project Established 03.080.10 Work Places-Flower shops-general Rules This standard includes, general rules for managemenet, structural properties, personnel of flower shops Subsector : A99 Registration Date : 2011-11-25 TSE Turkey Project ID : tst86724/0001 Project Established 03.080.30 Workplaces - Road oil, petroleum products, debris and so on. substances that transport service - General rules This standard includes general rules for physical characteristics, technical equipment, and personnel of surgeries ** End of Sector **
Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2011-12-06
Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : 2011-11-17 SIS Draft Issue Date : 2011-11-14 Sweden Latest Date for Comments : 2012-01-14 Project ID : 00883006/0001 Project Established 883006 Characteristics and requirement levels of natural smoke and heat ventilators in different applications No standard within this subject exists. The proposal is unique. Subsector : B01 Registration Date : 2011-11-25 AFNOR France Project ID : FA176301/0001 Project Established NF S 61-221 Fire fighting equipment. Water supply indicator plates. Subsector : B01 Registration Date : 2011-11-25 AFNOR France Project ID : FA176302/0001 Project Established NF S 61-930 Fire safety systems Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2011-11-10 ASI Austria Project ID : 00024214/0001 Project Established 91.040.30 ÖNORM B 1300 Object safety tests for dwelling buildings - Regular safety evaluations in the course of visual inspections and non-destructive assessments - Principles and check lists The present Austrian Standard is applicable to regular safety evaluations within the framework of visual inspections and non-destructive assessments for existing areas including dwelling houses comprising at least one apartment which does not serve as company habitation, natural housing or workers' home, as well as to all other facilities and equipment intended for use. Excepted are the safety evaluations within the object units
Page 7 (e.g. apartments, offices, business rooms, existing plants) which, on the basis of contractual agreements, are subject to exclusive use. Possible official actions and procedures are not covered by this Standard. Subsector : B02 Registration Date : 2011-11-10 ASI Austria Project ID : 00024284/0001 Project Established 03.180, 93.040 ONR 24025 Requirements for the qualification of experts for bridge bearings This ONR contens the Requirements to the qualification for experts, who install bridge bearings and control and evaluate the structure safety. The training includes also the knowledge on the functioning of the types of structural bearings. Subsector B03: CONCRETE Subsector : B03 Registration Date : 2011-11-10 ASI Austria Project ID : 00024257/0001 Project Established 91.100.30 ÖNORM B 3328 Precast concrete products - Requirements, tests and procedure of the proof of conformity for precast concrete, reinforced concrete and prestressed concrete elements This ÖNORM contains definitions, requirements and test methods, the factory production control and the procedure for the proof of conformity for precast concrete, reinforced concrete and prestressed concrete elements for products which are not regulated in European product standards Subsector : B03 Registration Date : 2011-11-10 ASI Austria Project ID : 00024260/0001 Project Established 91.010.30, 91.120.25, 93.040 ÖNORM B 1998-2 Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National specifications concerning ÖNORM EN 1998-2 and national comments This Austrian Standard specifies national parameters to ÖNORM EN 1998-2 and shall be applied jointly with ÖNORM EN 1998-2 in Austria.
Page 8 Subsector : B03 Registration Date : 2011-11-10 ASI Austria Project ID : 00024261/0001 Project Established 91.010.30, 91.120.25 ÖNORM B 1998-3 Eurocode 8 - Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings - National specifications concerning ÖNORM EN 1998-3 This Austrian Standard specifies national parameters to ÖNORM EN 1998-3 and shall be applied for building constructions jointly with ÖNORM EN 1998-3 in Austria. Subsector B06: GYPSUM Subsector : B06 Registration Date : 2011-11-10 ASI Austria Project ID : 00024258/0001 Project Established 91.100.10 ÖNORM B 3415 Gypsum plasterboards and gypsum plasterboards systems - Rules of planning and use This Austrian Standard applies to the planning of non-loadbearing systems of gypsum according to ÖNORM B 3410 and ÖNORM EN 520 and for the application of gysum on site (e.g. gypsum plasterboard walls, suspended ceilings, additional top floor extension, cladding elements). Prefabricated elements for wood and prefabricated houses (e.g. according to ÖNORM B 2310) and their completion in the course of building of the works and elements with bracing effect are not applied by this Standard. Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : 2011-11-10 ASI Austria Project ID : 00024286/0001 Project Established 13.220.01, 91.060.50 ONR 23850 Exchange and retrofitting of locks, hardware and gaskets for existing fire barriers and smoke control shutters This ON Rule describes a possible exchange and retrofitting of locks, hardware and gaskets for existing fire barriers according to ÖNORM B 3850 and for smoke tight closures according to ÖNORM B 3855 as well as for smoke resisting doorsets according to ÖNORM B 3851.
Page 9 Subsector : B08 Registration Date : 2011-11-10 ASI Austria Project ID : 00024287/0001 Project Established 91.190 ONR 25340 Building hardware - Rules for practical application of ÖNORM EN 179 and ÖNORM EN 1125 This ONR regulates the safe and effective use of hardware according to ÖNORM EN 179 (Emergency exit devices) and ÖNORM EN 1125 (Panic exit devices) for emergency exits. Subsector B12: MASONRY Subsector : B12 Registration Date : 2011-11-25 AFNOR France Project ID : FA176697/0001 Project Established PR NF EN 771-1/CN Specifications for masonry units - Part 1 : CLay masonry units - National addition to NF EN 771-1:2011 Subsector : B12 Registration Date : 2011-11-25 AFNOR France Project ID : FA176704/0001 Project Established PR NF EN 771-5/CN Specification for masonry units - Part 5 : Manufactured stone masonry units - National addition to NF EN 771-5:2011 Subsector : B12 Registration Date : 2011-11-25 AFNOR France Project ID : FA176705/0001 Project Established PR NF EN 771-4/CN Specifications for masonry units - Part 4 : Autoclavec aerated concrete masonry units - National addition to NF EN 771-4:2011
Page 10 Subsector : B12 Registration Date : 2011-11-25 AFNOR France Project ID : FA176706/0001 Project Established PR NF EN 771-3/CN Specifications for masonry units - Part 3 : Aggregate concrete masonry units (dense and light-weight aggregates) - National addition to NF EN 771-3:2011 Subsector B13: SOLAR ENERGY Subsector : B13 Registration Date : 2011-11-10 ASI Austria Project ID : 00024280/0001 Project Established 27.160, 91.140.10, 91.140.65 ÖNORM M 7777-1 Solar thermal systems - Part 1: Requirements and planning - (Complementary provisions to ÖNORM EN 12977) This Austrian Standard shall be applied to the planning, installation and operation of thermal systems with solar collectors using heat transfer fluids. It refers to small and medium-sized solar thermal systems for water heating, heating support and general thermal use up to a gross collector surface of 50 m², except drain-back and thermosiphon installations. Subsector B15: SANITARY APPLIANCES Subsector : B15 Registration Date : 2011-11-25 AFNOR France Project ID : FA176395/0001 Project Established PR NF D14-603 Sanitary appliances. Vitreous enamelled cast iron. General specifications.
Page 11 Subsector : B15 Registration Date : 2011-11-25 AFNOR France Project ID : FA176396/0001 Project Established PR NF D14-602 Sanitary appliances. Vitreous enamelled steel. General specifications. Subsector : B15 Registration Date : 2011-11-25 AFNOR France Project ID : FA176397/0001 Project Established PR NF D 13-101 Sanitary appliances - Vitreous enamelled sinks Subsector : B15 Registration Date : 2011-11-25 AFNOR France Project ID : FA176398/0001 Project Established PR NF D 14-512 Sanitary appliances - Control of watertightness and water weigh absorbed by sanitary ceramic ware - Test methods Subsector : B15 Registration Date : 2011-11-25 AFNOR France Project ID : FA176399/0001 Project Established PR NF D14-601 Sanitary appliances. Vitreous enamelled sanitary ceramic. General specifications Subsector B20: DRAINAGE EQUIPMENT Subsector : B20 Registration Date : 2011-11-10 ASI Austria Project ID : 00024234/0001 Project Established
Page 12 23.040.01, 93.020, 93.025, 93.030 ÖNORM B 2503 Drain and sewer systems - Supplementary specifications for design, construction and testing This standard ist valid for the design, construction and testing of drain and sewer systems and ist applicable together with ÖNORMEN EN 476, EN 752-1 to -7 and EN 1610. Clause 6 of this standard gives general rules for the testing of drain and sewer piping systems, manholes and inspection chambers and containers. Testing for pressure and low-pressure drainage systems are also specified in ÖNORMEN EN 1671, EN 805 and EN 1091. Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : 2011-11-03 NEN Netherlands Project ID : 50001691/0001 Project Established 23.040.01, 91.140.40 NEN 7244-1:2011 Concept nl Dutch edition on base of NEN-EN 12007-1 - Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations Describes the general functional recommendations for pipelines up to the point of delivery, and also for buried sections of pipework after the point of delivery, for maximum operating pressures up to and including 16 bar for gaseous fuels in accordance with table 1 of EN 437:1993. It applies to their design, construction, commissioning, decommissioning, operation, maintenance, renovation, extension and other associated works. Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038659/0001 Project Established PNE 60670-1 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 1: General. This part of the standard is to define and classify the receiving installations and establish its general requirements. REV/AMD UNE 60670-1:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038660/0001 Project Established
Page 13 PNE 60670-2 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 2: Terminology. This part of the standard is to establish the terminology used by or related to other parts of the UNE 60670, in regard to technical aspects. REV/AMD UNE 60670-2:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038661/0001 Project Established PNE 60670-3 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 3: Pipework, elements, fittings and their unions. This part of the standard is to establish general conditions to be met by pipes, fixtures and fittings that can be used in the construction of gas reception facilities and the connection of gas appliances and their unions. REV/AMD UNE 60670-3:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038662/0001 Project Established PNE 60670-4 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 4: Design and construction. This part of the standard is to establish guidelines for the design and construction of gas reception facilities supplied with a maximum operating pressure (MOP) less than or equal to 5 bar. REV/AMD UNE 60670-4:2005, UNE 60670-4:2005 ERRATUM:2007 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038663/0001 Project Established PNE 60670-5 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 5: Housing for meters installation. This part of the standard is to establish general conditions to be met by enclosures for the location of gas meters. REV/AMD UNE 60670-5:2005
Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038664/0001 Project Established PNE 60670-6 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 6: Configuration, ventilation and evacuation of the combustion products requirements for the premises for gas appliances. This part of the standard is to establish the conditions that premises containing gas appliances must meet, whatever their type, technology and application, in relation to the characteristics of the premises and ventilation holes, ventilation systems of the premises and systems of evacuation of the combustion products. Page 14 REV/AMD UNE 60670-6:2005, UNE 60670-6:2005 ERRATUM:2008 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038665/0001 Project Established PNE 60670-7 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 7: Installation and connection requirements for gas appliances. This part of the standard is to establish requirements for installation and connection of gas appliances to the receiving facility or a mobile tank of LPG. REV/AMD UNE 60670-7:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038666/0001 Project Established PNE 60670-8 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework This part of the standard specifies the tests for the delivery of gas reception facilities supplied with a maximum operating pressure (MOP) less than or equal to 5 bar. These tests should not be made to the portions of the connections or to the appliances. REV/AMD UNE 60670-8:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038667/0001 Project Established PNE 60670-9 Gas installations pipework supplied at maximum operating pressure (MOP) up to and
including 5 bar. Part 9: Previous tests of the supply and commissioning Page 15 This part of the standard is to establish the different activities during pre-delivery testing, and subsequently must be made in the commissioning of gas reception facilities supplied with a maximum operating pressure (MOP) less or equal to 5 bar. REV/AMD UNE 60670-9:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038668/0001 Project Established PNE 60670-10 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 10: Verifying of maintain of the safety conditions of the appliances in their installation This part of the standard provides the guidelines necessary to verify that the security of the device, once installed, are maintained properly. REV/AMD UNE 60670-10:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038669/0001 Project Established PNE 60670-11 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 11: Operations on installations pipework in service. This part of the standard is to establish general policy guidelines for the operations carried out in gas reception facilities in service with a maximum operating pressure (MOP) less than or equal to 5 bar. REV/AMD UNE 60670-11:2005 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038670/0001 Project Established PNE 60670-12 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 12: Technical criteria for periodic inspection of the installations pipework in service. This part of the standard establishes the basic technical criteria to be applied in the periodic inspection of gas reception facilities in service with a maximum operating pressure (MOP) less than or equal to 5 bar. REV/AMD UNE 60670-12:2005
Page 16 Subsector : B25 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038671/0001 Project Established PNE 60670-13 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 13: Technical criteria for periodic inspection of gas appliances connected to the installations pipework in service. This part of the standard establishes the basic technical criteria to be applied in the periodic inspection of gas appliances connected to a reception facility in their actual conditions of installation and operation of the flue for the evacuation of the combustion products in those appliances that require it. This rule does not apply to the maintenance of gas appliances, which must be performed according to manufacturer's specifications thereof. REV/AMD UNE 60670-13:2005 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : 2011-11-07 SNV Draft Issue Date : 2011-11-03 Switzerland Latest Date for Comments : 2011-12-09 Project ID : CH110023/0002 Draft for public enquiry 93.080.30 SN 640569a Passive safety in public space: Structural Design of Road Equipment Subsector : B26 Registration Date : 2011-11-16 SNV Draft Issue Date : 2011-11-14 Switzerland Latest Date for Comments : 2012-12-27 Project ID : CH110025/0002 Draft for public enquiry 93.080.10 SN 671520a Rail - road: parallel guidance and approach REV/AMD SN 671520 (2002) Subsector : B26 Registration Date : 2011-11-25 AFNOR France Project ID : FA176617/0001 Project Established PR NF P84-500 Geomembranes - Dictionary of terms dealing with geomembranes
Page 17 Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : 2011-11-10 ASI Austria Project ID : 00024259/0001 Project Established 91.100.50, 93.040 ÖNORM B 3684 Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - National implementation of ÖNORM EN 14695 This Austrian Standard is used for implementation of ÖNORM EN 14695; defines in clause 5 the minimum of technical requirements for Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete in reference to the principle applicability in Austria. The specific requirements for bitumen sheets, which are used in Austria, can be found in clause 6. Subsector : B27 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038504/0001 Project Established PNE 104423 Synthetic materials. Application. Lining systems for water reservoirs used for irrigation purposes or water storage with waterproofing geomembranes made out of manufactured thermoplastic sheets It defines the requirements for the installation and maintenance of the waterproofing systems for irrigation purposes or storage of undrinkable water with waterproofing membranes of thermoplastic sheets REV/AMD UNE 104423:1995, UNE 104423:1996 ERRATUM Subsector B31: HEATING SYSTEMS IN BUILDINGS Subsector : B31 Registration Date : 2011-11-10 ASI Austria Project ID : 00024279/0001 Project Established 91.140.10 ÖNORM M 7551 Heating boilers - Condensing Heating boilers for wood hand and automatically stocked with a nominal heat output of up to 500 kw - Terminology, requirements and testing (Complementary provisions to ÖNORM EN 304 and ÖNORM EN 303-5) The present ÖNORM shall be applied to heating boilers with hand stocking and
Page 18 automatically stocking for wood with a nominal heat output of up to 500 kw. It specifies requirements and testing conditions for condensing appliances for firing systems with condensing heating operated with wood according to ÖNORM M 7132, 7133 (only incineration plants with A 0,5 ash) and M 7135 (only incineration with A 0,5 ash). This ÖNORM shall be applied with ÖNORM EN 303-5 and ÖNORM EN 304. Subsector : B31 Registration Date : 2011-11-10 ASI Austria Project ID : 00024285/0001 Project Established 91.140.10, 91.140.30 ONR 85000 Requirements for additional qualifications for particular subject areas of building equipment technology - Inspection and comprehensive tests of heating and airconditioning systems The present ON-Rule describes the additional qualifications required for the implementation of inspections of building equipment according to EU Directive on buildings 2010/31, Article 14, Article 15 and Article 17 and the relevant provisions of Austrian national and federal state laws. Subsector B33: BUILDING DESIGN Subsector : B33 Registration Date : 2011-11-10 ASI Austria Project ID : 00024215/0001 Project Established 03.200, 91.010.30 ÖNORM B 1603 Barrier free facilities for tourism and leisure - Design principles If the installation of barrier-free facilities for tourism and leisure is intended, the provisions of the present Austrian Standard have to be observed, in combination with those of ÖNORM B 1600 for new buildings, extensions, annexes, retrofittings and rebuildings. The present ÖNORM specifies minimum requirements and basic conditions, exceeding the requirements of ÖNORM B 1600, for the construction, installation and equipment of barrier-free facilities for tourism, such as accommodation facilities, restaurants and catering businesses as well as cultural, leisure and recreation facilities. Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS Subsector : B34 Registration Date : 2011-11-30 AENOR Spain
Project ID : P0038560/0001 Project Established PNE-ISO 21931-1 Sustainability in building construction -- Framework for methods of assessment of the environmental performance of construction works -- Part 1: Buildings Page 19 REV/AMD UNE-ISO/TS 21931-1:2008 IN Subsector : B34 Registration Date : 2011-11-03 TSE Turkey Project ID : tst37593/0001 Project Established NGV filling stations This standard covers NGV filling stations Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2011-11-10 ASI Austria Project ID : 00024216/0001 Project Established 91.010.20 ÖNORM B 2120 Minimum requirements for a building promoter's contract This Austrian Standard includes exclusively the general recommendations for minimum contents of building promoter's contracts according to the Act on Building Promoter's Contracts (BTVG) intended to protect the customer; it, therefore, applies only if payments of more than EUR 150 per m² of useful area have to be made for the construction or complete renovation. In this connection, also those payments have to be considered which the customer has to effect to the building promoter or to third parties for special or additional services or works offered or prescribed by the building promoter. Subsector : B99 Registration Date : 2011-11-10 ASI Austria Project ID : 00024217/0001 Project Established 91.010.20, 91.120.10 ÖNORM B 2259 Manufacturing of external thermal insulation composite systems - Contract to provide services This Austrian Standard includes methods and contractual provisions for the execution of external thermal insulation composite systems using materials according to ÖNORM B 6400 and ÖNORM B 6405.
Page 20 Subsector : B99 Registration Date : 2011-11-01 BSI United Kingdom Project ID : 01102655/0001 Project Established BS 6093:2006+A1:2011 Design of joints and jointing in building construction. Guide. Amendment ** End of Sector **
Information procedure Page 21 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2011-12-06
Subsector C01: Food products Page 22 Subsector : C01 Registration Date : 2011-11-29 ISS Draft Issue Date : 2011-11-23 Serbia Latest Date for Comments : 2012-12-26 Project ID : 00029890/0001 Draft for public enquiry 67.080.20 SRPS E.B1.300 Fresh fruit and vegetables Commercial quality control requirements Onions This standard defines the quality reqirements for onions of varieties (cultivars) grown from Allium cepa L. at the export-control stage after preparation and packaging. Green onions with full leaves and onions for industrial processing being excluded. European : Identical to UNECE STANDARD FFV-25:2010 Subsector : C01 Registration Date : 2011-11-29 ISS Draft Issue Date : 2011-11-23 Serbia Latest Date for Comments : 2012-12-26 Project ID : 00029894/0001 Draft for public enquiry 67.080.10 SRPS E.B2.202 Fresh fruit and vegetables Commercial quality control requirements Berry fruits This standard defines the quality reqirements for berry fruits at the export-control stage after preparation and packaging. Berry fruits for industrial processing being excluded European : Identical to UNECE STANDARD FFV-57:2010 Subsector : C01 Registration Date : 2011-11-29 ISS Draft Issue Date : 2011-11-23 Serbia Latest Date for Comments : 2012-12-26 Project ID : 00029896/0001 Draft for public enquiry 67.080.10 SRPS E.B2.201 Fresh fruit and vegetables Commercial quality control requirements Strawberries This standard defines the quality reqirements for strawberries of varieties (cultivars) grown from the genus Fragaria L. at the export-control stage after preparation and packaging. Strawberries for industrial processing being excluded European : Identical to UNECE STANDARD FFV-35:2010 Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : t1000341/0001 Project Established Edible Olive Oil This standard specifies edible olive oil
Page 23 Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : t1000353/0001 Project Established Canned fish This standard, covers canned fish. This standard does not specify salted, smoked and deepfrozen fish. Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : t1000886/0001 Project Established Edible Sunflowerseed Oil This standard covers edible sunflowerseed oil. Subsector : C01 Registration Date : 2011-11-17 TSE Turkey Project ID : t1003892/0001 Project Established Vanillin This standard applies to vanillin. It does not apply to different of vanillin products obtained whole, sliced and ground vanillins, liquid vanillin dissolved in ethylalcohol. Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : t1010930/0001 Project Established Canned tomato sauced meatball (İzmir s meatball) - Ready to serve This standard covers the canned tomato sauced meatball(izmir's meatball)which is ready to serve
Page 24 Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : t1013451/0001 Project Established Animal feeds - Dried Distillers Grains with Solubles (DDGS) This standard specifies the requirements for cereal remainings which is used after adding animal feeds, and obtained after drying cereal remainings which ethanol is produced by amylum fermentation mixed with soluble matter. Subsector : C01 Registration Date : 2011-11-17 TSE Turkey Project ID : t1013470/0001 Project Established 67.180.10 Dough desserts Ready to syrup-add This Standard specifies dough desserts which is ready to syrup-add Subsector : C01 Registration Date : 2011-11-25 TSE Turkey Project ID : tst00591/0001 Project Established 67.100.30 White Cheese This standard specified white cheese. Subsector : C01 Registration Date : 2011-11-25 TSE Turkey Project ID : tst03734/0001 Project Established Marmalades This standard specifies to definitions, classification and properties, sampling, examination, analyses and marketing of marmelades.
Page 25 Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : tst04265/0001 Project Established 67.100.10 Dairy Ice-Cream This standard applies to flauvared and can be filled to edible conicals of dairy ice cream.it does not cover the ice-cream with fruit essence, vegetable oil, diet, diabetic and maraş icecream. Subsector : C01 Registration Date : 2011-11-03 TSE Turkey Project ID : tst10432/0001 Project Established Animal Feeds-Rice Bran This standard applies to rice bran. It does not apply to the other kind of brans. Subsector : C01 Registration Date : 2011-11-25 TSE Turkey Project ID : tst11914/0001 Project Established 67.160.20 Sourcherry Nectar This standard comprise sourcherry nectar. Subsector : C01 Registration Date : 2011-11-25 TSE Turkey Project ID : tst86355/0001 Project Established Filled and Unfilled High Boiled Sweet This standart includes hig boiled sweet.
Page 26 Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : 2011-11-14 TSE Turkey Project ID : tst05808/0001 Project Established 87.040 Paints and varnishes Water based coating materials and coating systems for use in interior walls and ceilings This standard specifies water based coating materials and coating systems intended for the protection and decoration, surfaces of which are old or new, coated or uncoated, used for interior wall and ceilings. Subsector : C02 Registration Date : 2011-11-14 TSE Turkey Project ID : tst07847/0001 Project Established 87.040, 91.100.10 Paints and plasters Coating materials and coating systems for exterior masonry and concrete This standard specifies the coating materials and/or plaster and coating systems for the preservation, protection and decoration of exterior new and old, coated or uncoated masonry. Subsector C03: CHEMISTRY Subsector : C03 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038577/0001 Project Established PNE 84018 Cosmetic raw materials. Diazolidinyl urea. This standard determines the specification required by diazolidinyl urea used in cosmetic products REV/AMD UNE 84018:1995 Subsector : C03 Registration Date : 2011-11-14 TSE
Page 27 Turkey Project ID : tst00883/0001 Project Established 71.060.30 Hydrochloric acid - For industrial use This standard covers hydrochloric acid used in food and related industries, other industrial branches and surface cleaning. International : Not Equivalent to ASTM E 224: 2008 Subsector : C03 Registration Date : 2011-11-28 TSE Turkey Project ID : tst11885/0001 Project Established 71.100.40 Cleaning agents Used for hand cleansers This standard specifies the definition, calssification, requirements, sampling, inspections, tests and supplying to the market of cleaning agents used for hand cleansers. This standard does not specify soaps used for hand cleansers and heavy duty hand cleansers. Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038551/0001 Project Established PNE 84663 Cosmetic raw materials. Plant extracts. Aloe vera hydroglycolic extract (Aloe vera L.). This standard determines the specifications required by the aloe vera hydroglycolic extract, in cosmetic uses. REV/AMD UNE 84663:2006 Subsector : C06 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038552/0001 Project Established PNE 84664 Cosmetic raw materials. Plant extracts. Witch hazel hydroglycolic extract (Hamamelis virginiana L.). This standard determines the specifications required by the witch hazel hydroglycolic extract, in cosmetic uses.
Page 28 REV/AMD UNE 84664:2006 Subsector : C06 Registration Date : 2011-11-30 AENOR Spain Project ID : P0038553/0001 Project Established PNE 84667 Cosmetic raw materials. Plant extracts. Ginseng hydroglycolic extract (Panax ginseng C.A. Meyer). This standard determines the specifications required by the ginseng hydroglycolic extract, in cosmetic uses. REV/AMD UNE 84667:2006 ** End of Sector **
Information procedure Page 29 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2011-12-06
Subsector F02: UNITS & SYMBOLS Page 30 Subsector : F02 Registration Date : 2011-11-02 SFS Draft Issue Date : 2011-09-30 Finland Latest Date for Comments : 2011-12-01 Project ID : 0000E279/0001 Draft for public enquiry Quantities and units. Moisture REV/AMD SFS 5348:1987 Subsector F07: DOCUMENTATION AND INFORMATION Subsector : F07 Registration Date : 2011-11-16 DIN Germany Project ID : 00900097/0001 Project Established 00900097 Information and documentation - Romanization of Japanese Subsector F10: STATISTICS Subsector : F10 Registration Date : 2011-11-10 ASI Austria Project ID : 00024263/0001 Project Established 03.120.30 ÖNORM ISO 13053-1 Quantitative methods in process improvement - Six Sigma - Part 1: DMAIC methodology This part of ISO 13053 describes a methodology for the business improvement methodology known as Six Sigma. The methodology typically comprises five phases: define, measure, analyse, improve and control (DMAIC). This part of ISO 13053 recommends the preferred or best practice for each of the phases of the DMAIC methodology used during the execution of a Six Sigma project. It also recommends how Six Sigma projects should be managed and describes the roles, expertise and training of the personnel involved in such projects. It is applicable to organizations using manufacturing processes as well as service and transactional processes. Subsector : F10 Registration Date : 2011-11-10 ASI Austria Project ID : 00024264/0001 Project Established
Page 31 03.120.30 ÖNORM ISO 13053-2 Quantitative methods in process improvement - Six Sigma - Part 2: Tools and techniques This part of ISO 13053 describes the tools and techniques, illustrated by factsheets, to be used at each phase of the DMAIC approach. The methodology set out in Part 1 of ISO 13053 is generic and remains independent of any individual industrial or economic sector. This makes the tools and techniques described in this part applicable to any sector of activity and any size business seeking to gain a competitive advantage. Subsector F12: INFORMATION PROCESSING SYSTEMS Subsector : F12 Registration Date : 2011-11-25 AFNOR France Project ID : FA176610/0001 Project Established PR NF Z42-020 Functional specifications for a numerical safe component, intended for preservation of numeric data under conditions ensuring timelong integrity Subsector F13: ENVIRONMENTAL TESTS Subsector : F13 Registration Date : 2011-11-03 NEN Netherlands Project ID : 50001687/0001 Project Established NEN 5619:2011 Concept nl Radioactivity measurements - Determination of strontium 89 and strontium 90 with liquid scintillation counting This standard describes the principles for the determination of the activity of pure beta emitters 90 Sr and 89 Sr. For the sample pretreatment is referred to NEN 5665. The radiochemical determination is made by extraction chromatography and the measurement is done with liquid scintillation counting Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : 2011-11-03 TSE Turkey
Page 32 Project ID : t1006809/0001 Project Established 73.020 Determination of scratch hardness according to Mohs Scale This standard specifies the scratch hardness according to Mohs Scale. European : Not Equivalent to BS 6431-13:1986 Subsector : F15 Registration Date : 2011-11-28 TSE Turkey Project ID : tst02028/0001 Project Established 73.080 Determination of Unconfined Compressive Strength of Rocks This standard covers the determination of the unconfined compressive strength of intact cylindrical rock specimens. International : Not Equivalent to ASTM D 7012:2010 Subsector : F15 Registration Date : 2011-11-28 TSE Turkey Project ID : tst04897/0001 Project Established 81.060.10 Ceramic whiteware clays - Determination of drying and firing shrinkage This standard covers test methods for drying and firing shrinkage of ceramic clays. International : Not Equivalent to ASTM C 326:2009 Subsector : F15 Registration Date : 2011-11-03 TSE Turkey Project ID : tst08614/0001 Project Established 73.080 Preparation of rock core specimens for mechanics tests - Determination of dimensional and shape tolerances This standard specfies procedures for determining the length and diameter of rock core specimens and the tolerance checks on the straightness of the elements on the cylindrical surface, the flatness of the end-bearing surfaces, and the perpendicularity of the end surfaces with the axis of the core. Subsector F17: ADMINISTRATIVE DOCUMENTS
Subsector : F17 Registration Date : 2011-11-17 SIS Draft Issue Date : 2011-11-07 Sweden Latest Date for Comments : 2012-01-07 Project ID : 00884000/0001 Project Established 884000 Municipal services to companies Municipal services/support to companies in terms of decision processes, coordination, administration and obtaining information Page 33 Subsector F99: UNDETERMINED Subsector : F99 Registration Date : 2011-11-04 LST Draft Issue Date : 2011-11-15 Lithuania Latest Date for Comments : 2012-01-15 Project ID : 10001005/0001 Draft for public enquiry 01.120, 13.020 Standardization - Part 3. Structure and presentation of standards and other publacations - Chapter 4. Guide for addressing environmental issues in product standards This Guide provides guidance on addressing environmental issues in product standards. It is primarily intended for product standards writers. Its purpose is to outline the relationship between the provisions in product standards and the environmental aspects and impacts of the product, to assist in drafting or revising provisions in product standards in order to reduce potential adverse environmental impacts at different stages of the entire product life-cycle, (NOTE 1 See Annex B for examples) to emphasize that taking into account environmental issues in product standards is a complex process and requires balancing competing priorities, to recommend the use of life-cycle thinking when defining environmental provisions for a product for which a standard is being drafted, and to promote the future development of relevant sector guides for addressing environmental issues in product standards by standards writers, consistent with the principles and approaches of this Guide. Subsector : F99 Registration Date : 2011-11-16 DIN Germany Project ID : 17300008/0001 Project Established 17300008 Standardization - Part 2: Presentation of documents (ISO/IEC Directives - Part 2:2011, modified); Trilingual version CEN/CENELEC Internal Regulations - Part 3:2011 Subsector : F99 Registration Date : 2011-11-03
Page 34 NEN Netherlands Project ID : 50001692/0001 Project Established 03.100.01, 03.120.20 NPR 9126:2011 Concept nl Assurance protocol self declaration NEN-ISO 26000 Protocol for the third party assurance of the self-declaration NEN-ISO 26000 Including the underlying evidence. ** End of Sector **
Information procedure Page 35 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on : 2011-12-06
Subsector H04: SPORTS EQUIPMENT Page 36 Subsector : H04 Registration Date : 2011-11-22 SIS Draft Issue Date : 2011-11-22 Sweden Latest Date for Comments : 2012-01-22 Project ID : 00882480/0001 Project Established 882480 Mouthgards for icehockey players The aim of the standard is to make it possible for consumers to buy mouthgards which fulfil defined safety requirements Subsector : H04 (Secondary Subsector) Registration Date : 2011-11-01 BSI United Kingdom Project ID : 01102653/0001 Project Established BS 5883:2012 Specification for surface swimming goggles Subsector H99: UNDETERMINED Subsector : H99 Registration Date : 2011-11-10 ASI Austria Project ID : 00024282/0001 Project Established 65.020.30 ÖNORM S 1010 Private keeping of degus This ÖNORM describes the private keeping of dégus (including their keeping e.g. in kindergartens and pensioners' residences), particularly concerning the condition and equipment of shelters and keeping systems. The objective of this ÖNORM is the optimization of keeping conditions under the aspect of appropriateness to the species [ 13 Abs. 3 TSchG]. The keeping of these animals in the scope of business activities and animal shelters is not subject to this ÖNORM. Subsector : H99 Registration Date : 2011-11-28 NSAI Ireland Project ID : 01078881/0001 Project Established 91.060.50 I.S. 387
Internal blinds - Safety requirements for window corded products (including curtains). Page 37 Specifies the safety requirements which window corded products shall fulfil when fitted to a building. Construction, opertion and maintenance are also covered. REV/AMD I.S. 387 Subsector : H99 Registration Date : 2011-11-25 AFNOR France Project ID : FA176532/0001 Project Established PR NF D94-001 Doping prevention in sports-food additives and other foodstuffs intended for sports people-good development and manufacturing practices aimed at ensuring the absence of doping substances ** End of Sector **
Information procedure Page 38 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector I : MECHANICAL ENGINEERING Register issued on : 2011-12-06
Subsector I05: IRON PIPES Page 39 Subsector : I05 Registration Date : 2011-11-16 DIN Germany Project ID : 00300294/0001 Project Established 00300294 Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries Subsector I06: PRESSURE VESSELS Subsector : I06 Registration Date : 2011-11-10 ASI Austria Project ID : 00024254/0001 Project Established 77.140.75, 93.020 ÖNORM B 2567 Piles of ductile iron - Dimensions, installation and quality assurance This standard describes execution characetristics, installations provisions, statics and quality assurance of ductile iron piles. These piles are used as foundation elements for civil and underground engineering, industrial and pipeline construction, for brigdes and special applications. Furthermore the procedure of proof of conformity according to 3 (2) of the Federal act of Standardization of 1971 for ductile iron piles is given in this standard. Subsector : I06 Registration Date : 2011-11-10 ASI Austria Project ID : 00024255/0001 Project Established 23.040.10, 23.040.40 ÖNORM B 2599-3 Ductile cast iron pipes and fittings - Part 3: Requirements on joints, surface protection and quality assurance of gas piplines This standard has to be applied together with ÖNORM EN 969 and includes specifications for joints, surface protection and quailty assurance of gas pipelines, which are not stated in ÖNORM EN 969. Furthermore the procedure of proof of conformity according to 3 (2) of the Federal act of Standardization of 1971 for ductile cast iron pipes and fittings is given in this standard. Subsector : I06 Registration Date : 2011-11-10 ASI Austria
Page 40 Project ID : 00024256/0001 Project Established 23.040.10, 23.040.40 ÖNORM B 2599-4 Ductile cast iron pipes and fittings - Part 4: Specifications for joints, surface protection and quality assurance of fittings for PVC-U or PE piping systems This standard has to be applied together with ÖNORM EN 12842 and includes specifications for joints, surface protection and quailty assurance of fittings for PVC-U or PE piping systems, which are not stated in ÖNORM EN 12842. Furthermore the procedure of proof of conformity according to 3 (2) of the Federal act of Standardization of 1971 for ductile cast iron fittings for PVC-U or PE piping systems is given in this standard. Subsector I30: AIR DISTRIBUTION Subsector : I30 Registration Date : 2011-11-10 ASI Austria Project ID : 00024262/0001 Project Established 91.140.30 ÖNORM H 6040 Calculation of the sensible and latent cooling load as well as of the internal temperature evolution of rooms and buildings in summer (complementary provisions to ÖNORM EN 15255 and ÖNORM EN ISO 13791) As national amendment to ÖNORM EN 15255, the present Standard specifies the calculation method for the determination of the cooling load (sensible and latent) of rooms and buildings as well as of the temperature evolution inside rooms in case of limited cooling performance under non-stationary edge conditions. As national amendment to ÖNORM EN ISO 13791, this Standard defines the calculation method for the determination of room temperature evolution (air and operative) without cooling system under nonstationary edge conditions. Subsector I99: UNDETERMINED Subsector : I99 Registration Date : 2011-11-03 NEN Netherlands Project ID : 50001690/0001 Project Established 27.075, 29.160.20 NPR 8090:2011 Concept nl Stationary hydrogen generators This code of practice gives practical rules for the realisation, maintenance and management of stationary hydrogen generators in the Netherlands. Stationary hydrogen generators include WKK's, generators ans back up installations.
** End of Sector ** Page 41
Information procedure Page 42 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector M : METALLIC MATERIALS Register issued on : 2011-12-06
Subsector M05: WELDING Page 43 Subsector : M05 Registration Date : 2011-11-03 NEN Netherlands Project ID : 50001688/0001 Project Established 25.160.01, 91.080.40 NPR 2053:2011 Concept nl Welding of reinforcing steel and steel strips This code of practice gives recommendations for the welding of connections in reinforcing steel and between reinforcing steel and building elements of steel. Subsector M99: UNDETERMINED Subsector : M99 Registration Date : 2011-11-07 BDS Bulgaria Project ID : BG020003/0001 Project Established 77.120.70 prbds 4331 Cadmium. Technical delivery conditions This revision of BDS 4331:1975 specifies the technical delivery conditions of cadmium in technical purity, in the form of ingots, plates and rods. REV/AMD BDS 4331:1975 ** End of Sector **
Information procedure Page 44 Monthly Notifications Register Notifications registered at CCMC from 2011-11-01 to 2011-11-30 Sector N : NON-METALLIC MATERIALS Register issued on : 2011-12-06
Subsector N01: PAPER AND BOARD Page 45 Subsector : N01 Registration Date : 2011-11-16 DIN Germany Project ID : 07400195/0001 Project Established 85.060 DIN 6739-500 Paper and board - Part 500: Determination of grammage Subsector N02: SOLID FUELS Subsector : N02 Registration Date : 2011-11-10 ASI Austria Project ID : 00024278/0001 Project Established 75.160.10 ÖNORM M 7137 Compressed wood in natural state - Wood pellets - Requirements for storage of pellets at the ultimate consumer This Austrian Standard is applicable to pellets according to ÖNORM EN 14961-2 and defines requirements for design and equipment of pellet storages up to a capacity of 30 tons by the user. It is intended for all persons having the intention to establish and/or to equip a storage. If the quality of the pellets is ensured according to ÖNORM M 7135, ÖNORM EN 14961-2 and ÖNORM EN 15234-2 and the transport chain according to ÖNORM M 7136, there is no explosion risk in any storage area. Subsector N03: PETROLEUM PRODUCTS Subsector : N03 Registration Date : 2011-11-11 ISRM The Former Yugoslav Republic of Macedonia Project ID : 00037171/0001 Draft for public enquiry 75.160.30 pr МКС 1001:2011 Standard Specification for Liquefied Petroleum Gases (LPG) This standard specifies requirements and test methods for products commonly referred from producers, purchasers and consumers as Liquefied Petroleum Gases (LPG), and consisted of propane/propene (propylene), butane/butene and mixtures of those gases. These gases are extracted from natural gas or as gases produced from refinery production, but their storage, transport and manipulation are done on higher pressures in liquid stage. This standard is applicable to products intended for use as heating energy for domestic, commercial and industry application.