Report VNNF Test Report

Similar documents
Report VNLF Test Report

~~oeti. Report VN71 O Classification Report. Reference

Report Test Report

~,oeti. Report VN Classification Report. Reference

Report Classification Report on Burning Behaviour

Analysis Report

Shipboard incinerators with capacities up to 4000 kw


TFI Report Classification

TFI Report Reaction to fire test

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

Classification of reaction to fire performance in accordance with EN : A1: 2009 on Superfoil SFNC. Prepared for:

Analysis Report

Development of a European approach to assess the fire performance of facades

Conformity assessment procedures for the Alarm Components Scheme

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

FAÇADE FIRE TESTS Towards a new European standard method

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

MGN 453 (M) Maritime and Coastguard Agency Logo MARINE GUIDANCE NOTE

TFI Report Classification

Coatings for protection of FRP structures with heavy rain erosion loads

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

Test Report No

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

BCTC CARPET TECHNICAL CENTRE

Classification Report

Table of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017

DELTA Classification Report

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

EN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements

Centexbel. General certification regulations. Construction products

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

BLUE ANGEL The German Ecolabel Electric Hand Dryers DE-UZ 87 Basic Award Criteria Edition May 2014 Version 3

ATEX/05/1/7. In detail:

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms

Smoke and heat control systems - Part 10: Power supplies EN Classification according to operational and environmental class

Üntel is ready for CPR

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

ISO INTERNATIONAL STANDARD

Council Directive 93/68/EEC of 22 July 1993 amending Directives

LICENCE. to use the European Mark

BLUE ANGEL The German Ecolabel Stationary air conditioners DE-UZ 204 Basic Award Criteria Edition August 2016 Version 1

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 03 Wien,

PRESS RELEASE

Certification Scheme

LICENCE. to use the European Mark

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

New Requirements for Placing of Medical Devices on the Market: Conformity Assessment to the Technical Regulations

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)

Test Report No: ICL/H17/7967

Classification of reaction to fire performance in accordance with BS EN : A1: 2009 on Sandwich Panel, WP 50.

MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Regulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR

Vescom bv Sint-Jozefstraat AV Deurne Nederland

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

Notice. Approval number: Z Scope of validity By: 08 January 2013 to: 01 November 2017

INTERNATIONAL STANDARD

3th International Conference in Warsaw "MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK"

INTERNATIONAL STANDARD

Glass fibre rovings - Non-metallic materials

Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR)

Test Report: ICL/CR15/11/087

Colour Swatch. Xtreme Fabric

White paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?

Loss Prevention Standard

This document is a preview generated by EVS

APPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C

Procedure for the Approval of New Fire Detection and Alarm Technologies

Chain saws (electric mains powered and battery powered)

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

BRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems

REGULATION FOR THE CE CERTIFICATION ACCORDING TO THE MEDICAL DEVICES DIRECTIVE

+ = FIRE LABORATORY INTRODUCTION. APPLUS+ LGAI - Our company history. High Technology Knowledge. Customer Confidence. Branding

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

CE TYPE EXAMINATION CERTIFICATE

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

Maximum Dimensions: Approved for spans unlimited in width, heights up to 10.5 m ( in), minimum panel overlap 400 mm (15.

This document is a preview generated by EVS

Your Key to achieving C.E Marking Compliance

ISO INTERNATIONAL STANDARD

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

INTERNATIONAL STANDARD

YOUR GUIDE TO UNDERSTANDING CPR

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements

Transcription:

Report VNNF 082458.1 Test Report Applicant GABRIEL A/S Hjulmagervej 55 9000-Aalborg Denmark Reference Bente Ellingsoe Application Determination of the burning behaviour according to ÖNORM B 3825 as well as the smoke emission according to ÖNORM A 3800-1. Test material "Pixel" Material used in testing was anonymized for laboratory purposes. A detailed sample list is contained in the report. Issuing and Signatures Number of pages contained: 5 Original Issue / Vienna 15.02.2016 / tg / 249 Authorised for Institute Ing. Hannes Vittek ÖTI - Institut für Ökologie.Technik und Innovation GmbH Spengergasse 20,1050Vienna, Austria tel +43 1 5442543-0 j fax +43 1 5442543-10 email office@oeti.at FN 326826b \ VAT No. ATU65149029 UniCredit Bank Austria AG IBAN AT941200023410378800 BIC BKAUATWW EORI ATEOS1000015903 Es gelten ausschließlich unsere Allgemeinen Geschäftsbedingungen ] Onlyourgeneral terms and conditions apply MemberofTESTEX Group

VNNF 082458.1 2 / 5 Contents 1 Order... 2 1.1 Chronology... 2 1.2 Samples... 2 2 Findings / Tests performed... 3 2.1 Description of the specimen... 3 2.2 Determination of burning behaviour of upholstery fabrics... 3 2.3 Determination of smoke emission... 4 3 Remarks... 5 1 Order 1.1 Chronology Date Received Order 29.01.2016 03.02.2016 Determination of the burning behaviour according to ÖNORM B 3825 as well as the smoke emission according to ÖNORM A 3800-1. 1.2 Samples Nr. Received Sample Identification 1 03.02.2016 "Pixel" (Unless otherwise stated samples are provided by the customer.)

VNNF 082458.1 3 / 5 2 Findings / Tests performed 2.1 Description of the specimen Description of the specimen according to DIN 60 000 Type of fibre according to DIN 60 001 part 1 Technological description 100 % Wool (declaration by the applicant) woven fabric 2.2 Determination of burning behaviour of upholstery fabrics Test conditions According to ÖNORM B 3825 (a) Arrangement of upholstery: Arrangement A: free chosen upholstery Kind of upholstery: foam: high resilient foam, properties: Burning behaviour: "schwerbrennbar" according to ÖNORM A 3800-1, Designation: RF 5560, Producer: Eurofoam Number of test specimens: Longitudinal direction 3 / Cross direction 3 Specimen Burningtime Longitudinal direction After-flametime After-glowtime Flame spread rate [mm/s] self-extinguishing before reaching the mark 1 none 11 -- -- yes 2 none 16 -- -- yes 3 none 9 -- -- yes Cross direction 1 none 4 -- -- yes 2 none 2 -- -- yes 3 none 4 -- -- yes Behaviour of the covering fabric: self-extinguishing of the covering fabric Behaviour of the upholstery: self-extinguishing of the upholstery Opinion According to ÖNORM B 3825 the tested specimen can be classified as "normal brennbar gemäß ÖNORM B 3825" Comments: This test is a compound test at which the furniture fabric will always be tested combined with upholstery. Classification, therefore, relates only to the described arrangement of specimens and foam used.

VNNF 082458.1 4 / 5 2.3 Determination of smoke emission Test conditions Standard: ÖNORM A 3800 (a) part 1/4.2 Arrangement of the specimen: loose smoke emission [%] Test 1 Test 2 Test 3 Test 4 Test 5 Mean Value 13 12 18 24 9 15 Classification The tested specimen can be classified according to ÖNORM A 3800-1, item 4.2.1 as: Qualmbildungsklasse Q1 - schwachqualmend

VNNF 082458.1 5 / 5 3 Remarks Validity There are no regulations concerning duration of validity in the individual test standards. As the results of the examinations refer only to the submitted and examined samples, the report is valid for these for an unlimited period. A period of validity specified as part of an expert evaluation is in the discretion of the consultant or the ÖTI. The applicability of results and expert evaluations for materials not tested is in the responsibility of the applicant. Whereby an apportionment of results as well as any specified period of validity can only be done for identically constructed products and only as long as the product produced unchanged. Possible national or international restrictions concerning the terms of usability of test and classification reports have to be considered; this is not the responsibility of the test laboratory. Sample Material Results of performed tests only refer to the sample material provided. Without explicit written other agreement testing is destructive and the sample material is transferred to the property of ÖTI, which is entitled to freely decide on storage and disposal. Issuance The valid first issue is done in paper and has single-handed signatures. For reference purposes and filing an unsigned electronic duplicate can be delivered in pdf format. Duplicates and translations will be marked accordingly on the cover sheet. Quality management, Accreditation and Notification All tests and services are performed under a quality management system according to EN ISO/IEC 17025 respectively EN ISO/IEC 17065. The ÖTI is accredited as Testing Laboratory and Certification Body for products. It also is a Notified Body for several directives with the registration number 0534 (see http://ec.europa.eu/enterprise/newapproach/nando/). Accreditation as Testing Laboratory was provided by Akkreditierung Austria (bmwfw). The scope of accreditation is listed on www.bmwfw.gv.at/akkreditierung. In this report test conditions of individual accredited test procedures are marked with ( a ). According to the decree on the use of the accreditation mark ( AkkZV ) the accreditation mark is only to be used by the accredited Conformity Assessment Body. Application of the registration number of the Notified Body: As to personal protective equipment (PPE) the requirements of PSA-SV 10, BGBl. Nr. 596/1994 as amended and article 13 of the Directive 89/686/EEC have to be kept. With construction products the application is only permitted within the declaration of performance for CE-marking. Copyright and Usage Notes It is pointed out, that any alterations, amendments or falsifications of reports not authorized by the issuer of the report will be prosecuted as civil and criminal offences; this especially to the appropriate requirements of ABGB, UrhG, UWG and criminal law and their respective international equivalents. Reports are protected under international copyright laws. Written consent of the ÖTI is required for publications (also in excerpt) and reference to tests for public relation purposes. Reports may only be reproduced in full length. End of report